3,474 models
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
Print approx. €8.86–€10.83 excl. taxPreliminary estimate for one variant
These are very simple drilling template for Blum ClipTop concealed hinges. Mark the position, align the notch, drill/mark I have uploaded the two TB distances I generally use (4.5 and 6.0mm) - see drilling diagram
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
18cm inner diameter (188mm outer) planter dish to put below planter or cover pots to collect and evaporate excess water. 140mm and 159mm inner diameter versions added. A variation with higher rim has been remixed by @FabianBaumeis_972452…
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant
This bracket mounts your BlueSCSI v2 in your vintage Macintosh hard drive bay. Note: This is NOT compatible with the 2023.10a board! For the 2023.10a version, you need this design: Features There is a slot in the side to make firmware…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Küken…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Ich habe den Topf mit 0.3 mm und Infill von 20 % gedruckt = ca 10 Stunden 11 Minuten aus PLA. Ist eine sehr stabile Form geworden.
Print approx. €11.61–€14.19 excl. taxPreliminary estimate for one variant
Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…
Print approx. €2.97–€3.64 excl. taxPreliminary estimate for one variant
D: wasserdichte Blumenvase für Rosen, Tulpen, etc. Höhe gesamt: 370 mm Lochtiefe: 170 mm Durchmesser außen: 108 mm Durchmesser innen: 93 mm !!!Keine Haltbarmacher zum Blumenwasser beimischen!!! E: waterproof flower vase for roses, tulips,…
Print approx. €55.88–€68.29 excl. taxPreliminary estimate for one variant
This 3D printed bracket is designed to mount a BlueSCSI in the 3.5" hard drive bay in vintage Macintosh computers. The BlueSCSI slides into the hold-downs near the SCSI connector, firmly snaps into place on the back, and is optionally…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Use a PC disk drive externally with this cover
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Reduzierstück für eine Klimaanlage/Abluftschlauch von 150er Abluft auf 125er Flansch -kann aufgeschraubt werden -Meine Klimaanlage ist von COSTWAY ……gedruckt mit PLA im Quality Mode….. ……Organische Stützen…..
Print approx. €14.87–€18.18 excl. taxPreliminary estimate for one variant
Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…
Print approx. €6.69–€8.17 excl. taxPreliminary estimate for one variant
Info: I am often using display covers like this one while printing at night and I like it but too often, I want to check the display in the dark room :) and i do not like being blinded by sharp white and blue light (even with minimized…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Mini United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) that uses a vintage Post Office (PO) Box Door. Can be used as a mail holder, change bank, or display piece. The back piece is not completely…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
Glaucus Atlanticus : Blue Dragon I would print this with a flubbery tpu. The Enigmatic Glaucus Atlanticus: A Celestial Dragon of the Sea Floating serenely on the ocean's surface is a creature of mythical beauty and potent danger: the…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
EN: In principle, there is a similar problem as with spheres in general (see https://www.printables.com/de/model/887687-garden-ball-rose-ball-rosenkugel-gartenkugel ) As a workaround, the sphere was cut and printed in 2 parts. It is then…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
A Plaque and a keyfob featuring the famous Blue Peter TV programme logo. As you can see, I'm the proud owner of a Blue Peter badge. :) I've included the colour change .gcode created in PrusaSlicer. Print instructions Category: Keychains…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Habe hier ein Modell gemacht um einen Abluftschlauch für eine Klimaanlage durch ein Plexiglas nach draußen zu führen. Die Plexiglas-Scheibe hat einen durchmesser von 4mm und wird von außen/innen vor dem Fenster mit Klebestreifen oder…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
You can find the BT5.0 Audio Pro card on the internet. It is 36x38 mm and has an amazing lot of possibilities. I paid € 4,25 for it. As I needed to connect my new jackless phone to the old audio system in the workshop, I only wanted the…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Dies ist ein Abluftgitter für Geräte in der Küche (Kühlschrank, Dampfabzug) für ein Loch der Grösse 45 cm x 6.5 cm. Es müssen zwei Teile gedruckt werden und zusammengeleimt (starker Zweikomponentenkleber oder Heissleim). Fusion360 Datei…
Print approx. €8.29–€10.13 excl. taxPreliminary estimate for one variant
A MMU coaster. Printed face down, Cork adhesive bottom added. Open as project.
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
EN: In principle, this gives you the same issue as with spheres in general (see https://www.printables.com/de/model/887687-garden-ball-rose-ball-rosenkugel-gartenkugel ) As a workaround, the sphere was cut and printed in 2 parts. It is…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
I turn my printer off, when not in use, but I don't think you have to unplug the power supply. My power supply is plugged in behind my desk, so I'd rather not have to remove it every time i turn the printer off - but the blue light is…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Haptic model for the visually impaired, based on the book " Překvapení skřítka Modrovouska " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
Simple Flowerpot which can be printed bicolour or multicolour. The gcode has the filament change instructions (M600) already built in. If you slice it by yourself, you must add M600 commands at the preferred layer. E.g. I have used for a…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for PETGSource material: PET
Bluetti Halter für das 500W Netzteil T500 oder den Ladeverstärker Charge Enhancer D050s zum Solargenerator AC200(P/MAX), B230, B300, AC300, EP500 Das Netzteil kann ohne Schrauben zu lösen, entnommen bzw. eingeschoben werden. Am hinteren…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This is a case for a Wifi & GPS device meant for Celestron telescope mounts at have available AUX ports. It combines the features of a few commercially available dongles into one device. The full project discussion can be found at…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
For "GhostBuster Proton Pack BLUE Cell light Kit" by HobbyKit Ltd on Etsy HobbyKit Shop https://www.etsy.com/it/listing/484137546/ghostbusters-movie-prop-proton-pack We bought this kit to fit into kiou's Proton Pack Q-pack -…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Honestly not the prettiest but works. it's really light you don't even feel it in a pocket great for use with IEM's or other wired sound devices. It should last a ridiculous amount of time on battery. Screwless it snaps togheter BOM:…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
Tried it out, and it's fantastic! The 4020 fan really steps up the game in cooling your layers, leading to quicker and better-quality prints. My original Bluer printer comes with two 4010 fans.I designed this support to replace and…
Print approx. €3.69–€4.50 excl. taxPreliminary estimate for one variant
Specifica per BLUM CERNIERA DA 35 mm! Quando sei sul sito e ti accorgi di aver saltato un foro per la cerniera del tuo mobile, o forse devi spostare quello che hai già fatto o semplicemente un modo molto veloce per creare un'anta del…
Print approx. €3.45–€4.22 excl. taxPreliminary estimate for one variant
Inspired with a model by Retro Frog I have made a vertical stand for My Book World Edition (Blue Rings) NAS drive.
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
Replacement part for the Fru Blu bubble gun (I'm sure it's sold under other brands too) for connecting the bottle with the bubble fluid. The original bottle connector is thin and can be damaged if dropped.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
The casing of my Bluetooth speaker started to stick, and I couldn't remove it using conventional methods. So I constructed a new casing. I printed the speaker grille as an infill without a base or top layer. So everyone can use whatever…
Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant
k sestavení příchytky je třeba 2 ks šroubů s imbus.hlavou M3 délky 19 mm a 2 ks matek M3, je třeba nastavit přerušení tisku k vložení matic
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Mithilfe dieser wunderschönen Schreibtischladestation kannst Du deine Apple Watch und dein iPhone sicher über die Nacht aufladen! 🔋 Außerdem bietet sie genug Platz für eine kleine Pflanze 🌱 (max.-Ø Blumentopf: 6 cm) und kann sogar als…
Print approx. €11.62–€14.20 excl. taxPreliminary estimate for one variant
Flowerring to attach flowers. Dimensions: 158.45 mm x 158.45 mm x 2.5 mm Print instructions: nothing special needed. material doesn´t matter. PLA and PETG works fine.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Articulated Bluey Buddy Made from hildi3d's fantastic Bluey. I added flexi legs and removed the arms to a downward position
The source marked this model as adult content.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Hi... I'm a Danish student, and I really like to make 3d models. This dragon is made in blender, (not the same as my smoothie tho). the model does have 24 joints + a joint with legs + a head + a tail. feel free to upload your makes. I…
I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.
this model is non functional but the trigger, slide and magwell still move.
Bluey cookie cutter Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. Recommended Print Settings: Line width:…
The source marked this model as adult content.
Introducing the perfect addition to your child's bedroom or play area - the Bluey 2D Wall Art! Based on the beloved TV show, this piece is sure to spark joy and creativity in any young Bluey fan. Printed at 0.2mm or lower layer height, to…
This fan-art project came about at the request of my two children, both of whom LOVE Bluey and Bingo and are the same age as the characters in the show! Made using Nomad on iOS. Print notes When imported on cura the models are…
Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…
I do not take any credit for the creation of this model. I was unable to find a realistic model of a french horn on thingiverse. I found this work on another site and converted it to an STL. I was looking for a realistic french horn to…
Gogeta Blue : Dragon Ball Gogeta is a powerful fusion character from the Dragon Ball franchise, formed when Goku and Vegeta perform the Fusion Dance. Here's a breakdown of key aspects: Fusion and Origin: Gogeta is created through the…
This is a good print in place canagar. Put the stick in the little notch on the bottom of the body, add the funnel on the top to load your favorite thing to smoke. Then use the plunger to pack it down. Once filled pick the packed tobacco…
DISCLAIMER: THIS IS A GUN MODEL WITH NO FUNCTION. IT HAS NO MOVING PARTS, AND IN NO WAY CAN WORK AS A FIREARM WITHOUT MODIFICATION TO THE MODEL. FURTHERMORE, THE DESIGNER OF THIS MODEL IS IN NO WAY RESPONSIBLE FOR ANY ILLEGAL ACTS…
Hand armor modelled after Djeeta from Granblue Fantasy Versus, but will probably work for other costumes aswell. IMPORTANT 1! You need to scale these to fit your own hands. These are based on the in-game model of Djeeta from Granblue…
Printing: No supports needed. This can be printed in a wide variety of materials. Purchase: Also available at kytor.com/store/product/n64-controller-display-stand/ Recommended Materials: PLA MAX Light Gray DURAMIC 3D PLA Plus Black or…
I wanted to create a bookend for my movie collection and thought that this pose was interesting and different from the standard pushing/leaning bookend design. The model is right side bookend, but it can simply be flipped in the slicer…
If you have any questions, complains, requests, or other comments, please let me know!
In my house we're big fans of Bluey that we watch on Disney+. We wanted a Hecuba garden gnome like on the show but finding nothing available online I decided to try drawing and printing one myself. This is not the kind of thing I'm good…
I maked Vernal Flower Bunny Decoration With Stand for Easter or Simple Home Decoration. PLA 17cm height Happy Printing
I created this parametric OpenSCAD drilling template to help me mount an inset door into a cabinet using some Blum inset hinges. Adjust the “inset” variable in the OpenSCAD code to suite the thickness of your door. I've provided STL and…
This is Eugeo's Blue Rose Sword 1:1 from anime "Sword Art Online: Alicization" with a Scabbard included. I made it in parts to be glued/welded together with an M8 threaded rod inside of it for extra rigidity. I printed in PLA with 15%…
Thingverse reupload of metabolit "plant pot self watering - Blumentopf" https://www.thingiverse.com/thing:3745796/files NOT ORIGINAL MAKER
Build a 3D printed Bluetooth speaker, inspired by the TV Show Severance. Powered by the Feather ESP32 V2 and the MAX98357A 3W I2S amplifier. This project is written in Arduino and uses two libraries by Phil Schatzmann that make using the…
The Bluey Cookie cutter and Stamp is a fun and unique baking tool based on the popular kids TV show Bluey. This product allows you to create cookies in the shape of Bluey, the beloved animated blue heeler dog character from the show. This…
Articulated Bluey Buddy Made from hildi3d's fantastic Bluey. I added flexi legs
3D model of a female Maryland blue crab The 3D model was created from CT scan data (11M triangle OBJ file) at the Smithsonian Institution - Digitization | 3D https://3d.si.edu/ To simplify printing, the .obj file was simplified in MeshLab…
print using support tree
I had an idea to make some blueprints and frame them on my wall, but regular office printers can’t print white so it required an unconventional solution. What I did is I designed a pen mount for my printer, bought some white ink pens, and…
A friend of mine told me about this model and I offered to modify it so that the gills could be printed as part of the mushroom instead of being painted (or digitally textured) on as they were in the original. Beware of the file size,…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl changelog: (19.07.2025) - added (XS_S_M_L)_CLIP_v1.1 with more tolerance You…
A cosplay armor/arm bracer in 2 parts. Need to be scaled to whatever size your arm is. This was the size that fit my slightly bigger arms. Also might be in an extremely tiny or large scale, might have to scale it up by 10000% or…
DR. SEUSS'S One Fish Two Fish Red Fish Blue Fish These are 2 or 3 color-change designs for a single extruder. Designed after the cover illustration from Dr. Suess's One Fish Two Fish Red Fish Blue Fish, but you can really print them in…
Excessively cute siamese cat keychain. 40x50mm, 3.2mm thick Other cats are available in this collection: Cute Cat Keychains Check out the bookmark versions in this collection: Cute Cat Bookmarks Printing instructions: Start with Beige…
I created the 3D model as an assembly in CREO. This allowed me to assign different colours to each piece. After a significant amount of testing, I was able to create this amazing Bluey Logo. The 3MF is very detailed. I hope others can…
Try the remixed part by: Balconio https://www.thingiverse.com/thing:6508688 Regards Michael from Poland Have a nice day Print Settings Printer brand: Artillery Printer: Artillery Sidewinder X2 Rafts: Yes Supports: Yes Resolution: i used…
Hallo 3D Druckfreunde, ich biete euch hier einen Pflanztopf zum runterladen an. Das Design ist modern gehalten. Die Druckdetails findet ihr weiter unten. Abmessungen: Höhe: 100 mm Breite Oben u. Unten: 100 mm Durchmesser der Öffnung inkl.…
Für Töpfe mit 15cm Durchmesser am oberen Rand. Skalierbare Datei. Layer 0.2 Infill 20% Nusle 0.4 Filament: OVERTURE Matte PLA Filament 1,75 mm, 1 kg (2,2 lbs) Spule, Maßgenauigkeit +/- 0,05 mm (Hellgrün), Polylactide
UPDATE 18NOV2021: Added alternative left and right frame parts modified to hold the blade 20mm lower than the original design. Use files TD3-FrameLeft-LowBlade.STL and TD3-FrameRight-LowBlade.STL instead of TD3-FrameLeft.STL and…
This is remixed from Stefan's holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series (possibly other Airbus models that share this clip?). This version also adds a headset hanger. Print upright (with the cable…
great model, a fun little Halloween figure for your kids, or just to put up on a shelf. please leave a like and feel free to reach out to me for anything, thank you and happy printing
hueforge delorean blueprint
SUMMARY I designed this Bluetooth speaker in the Fall of 2020. I am NOT an audio engineer, nor did I have much knowledge about what I was doing from an acoustics point of view. But it still turned out great and sounds amazing. There is no…
A very simple but effective and dimention accurate rack/rails organizer for PS5/PS4/Blu-ray cases, the idea is to stick the bottom surface to whatever surface/drawer you are placing them I suggest doing this with basic silicone as it will…
This is a parameterized spindle for storing CDs / DVDs / Blurays with a screw-on top to prevent the discs falling off. It fits all the disc types listed above and has a small bump on the bottom so the bottom disc does not scratch on the…
Bluey christmas cookie cutter Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. Recommended Print Settings: Line…
LCM Nearfield monitor speaker This is a near field mini-monitor, designed for excellent bass response, and intended for use at a desk or console. They are suitable for desktop, shelf, or wall mounting and optimized for small to medium…
First, thanks to @ZJH3D_317641 for his model ! Needed to print several of these for gift bags for my daughters 6th birthday. Painted them in Bambu Studio. Uses 8 colors, but can be reduced to 7 if you use some other existing color for the…
Everyone's favorite leaf bug! (As seen in Bluey Season 1 Episode 6, and Season 3 Episode 46) THIS IS A DIGITAL MODEL Not a physical object. Bug is scaled to approximately 1.5" long. Scale to whatever size you'd like. Perfect for 3D…
I designed a new 3D Sculpture made up of 100 pyramids, which resembles the shape of water when it falls into a drop 💧. This time too, each pyramid is unique, is numbered on the bottom face from 0 to 99 and has a different shape that…
BANDIT - WAVING - BLUEY - WALL ART
So, after many iterations and some bad behavior from my printers, I'm finally releasing this mod, or should i say costume? Basically, this is a custom front plate for my direct drive mod. As a Voron owner and a big fan of Voron printers…
J'invoque le tous puissant dragon blanc aux yeux bleu !!! <(^^)>
Wallmount for Shelly BLU Motion device.
This Bluey figurine is a great little decoration for your desk or bookshelf. It is made using several different colors of filament, layer on layer. So to make this, you'll need to switch filament serval times during the print. For those…
