23 models
Box for the gas sensor BME680. Project https://github.com/heximcz/raspberry-pico-mqtt-bme680 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 15% Filament: Design Devil PET-G…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
This is arduino BME680 breakout board sensor enclosure/casing. Its made so that the circuit and the sensor are separated with the wall, that way the circuit is protected from the moisture. For even better protection some silicone sealant…
This is a housing I made for an ESP32 (doit esp32 devkit v1) and a BME680 gas / air quality sensor. Parts: 1x ESP32 Devkit v1 (eg…
A simple slim light weight enclosure for a BME680 sensor. Designed based on the measurements of the specific board I was using, your mileage may vary. STEP file and original Autodesk Fusion model file included.
Board models for: BME680 SHT31/SHT41 SGP30 Category: Models
This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…
Remix of https://www.printables.com/model/545406-dht-outdoor-housing-extended-base-plate which is itself a remix. I just added in a mount for a BME680 which has major improvements over a BME280. Get air quality and atmospheric pressure…
The box will work for pretty much any ESP8266 project, it's designed around the ElectroCookie 1/4 solderable prototype board. The board mounts to the box with M2x5 screws The magnets are sized for 2mmx5mm Neodymium. Make sure you get the…
Video: https://youtu.be/f3HCPcvtOeY Guide: https://pastebin.com/hQnH6Q2W Parts: ESP8266 V3 Module ( Amazon US )( Aliexpress ) BME680 Module ( Amazon US )( Aliexpress ) 0.96" OLED Module ( Amazon US )( Aliexpress ) Dupont Wires (Included…
I needed a chamber temperature sensor for my Voron Trident, and had a BME680 sensor laying around, but could not find a simple mount that I could print to fix it to the extrusion of my printer. Secure the sensor PCB using M2 self-tapping…
Please ensure that your printer is dimensionally accurate as the part is very small. 0.2mm layer height. PLA is acceptable if it is not mounted near any hot parts. If the enclosure temperature is >50C, I recommend printing in PETG/ABS/ASA…
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I am making some designs using Seeed Studio components, as they are good value and work well. The CAD file for this component was notably missing, so have created this to help myself and others. Enjoy! If you like my designs…
Voron 2.4 z_Guide BME680 mount i use M2x6 screws For BTT Manta M8P v1.1 user: - use i2c pins from EXP1 und EXP2 when you not use this as display Klipper:…
The smallest case set for BME680 + ESP8266 This set is made for the minimal footprint when using a BME680 sensor connected with soldered cables to an ESP8266 controller. The model is optimised for ease of usage with both boards fixed…
Use WEMOS clone ESP32 D1 mini to control PMS5003 and BME680 sensors. Both are included in Tasmota all sensors. 2 cases included: one WEMOS ESP32 and with both sensors and one with WEMOS ESP32 and BME680 only.
I wanted to add a BMEx80 to a RaspberryPi Zero and have it displayed in my house. The great model from adafruit was doing part of this so I modified it so I can attach the sensor.
PCB there: https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22 Schematics there: https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf Button 6x6x9.3 Screw M2 for…
I had a BME680 sensor to fit this radiation shield so I modified the threaded insert to fit.
Since my FLSun V400 has an enclosure, I then added a BME680 temperature sensor to get internal temperature data. I bought this sensor on Amazon (like this: https://amzn.eu/d/1I2RX4h ) Really, this sensor also simultaneously detects…
Designed this enclosure for some Thread environment sensors I was building. Fits the Waveshare ESP32-C6-DEV-KIT-NX and BME680 - may be compatible with other Waveshare ESP32 boards if they share a footprint, but I haven't looked into it. I…
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
