Titanic Boiler 1/50 Model Kit
03/04/2025 update - new, higher poly parts Drawn to 100%, so scale down as needed. Suggest 2% for 1/50 scale.
- Downloads
- 550
- Likes
- 55
- Rating
- 0
89 models
03/04/2025 update - new, higher poly parts Drawn to 100%, so scale down as needed. Suggest 2% for 1/50 scale.
Traditional Russian samovar with ornate handles and tap, classic tea boiler design in vintage style.
Spoor 1 - Ketel BR01 (lading) / Spur 1 - Kessel BR01 (Ladung) / Gauge 1 - Boiler BR01 (load) Scale - 1:32 This load for Gauge 1 model railways is highly based on the boiler fitted to Deutsche Reichsbahn Baureihe 01 (Altbau) steam…
The boiler is a deeply outdated mech used by returned Exoplanetary Colonist to support their alien allies. Supportless and easy to print on FDM, this 6mm mech prints in just 2 pieces! The bottom usually prints very easily but the top…
Snap-on covers for TE 160783-7 (and other variants) boiler terminal connectors used in Gaggia espresso machines. Crimper Jaws are here: https://www.printables.com/model/673240 Materials: Nylon (PA12) has been tested. Ideal materials would…
Downscaled and reinforced so it could be easily printed for Z scale. Makes a nice industrial decoration.
The holder can take the portafilters for one or two cups and holds both in a vertical position. I printed in PETG, but other materials like PLA should also work. No special print settings (like supports) are required.
Print with at least 4 perimeters. Not a lot of infill required (~10%). PLA worked fine for me. Increase printing temperature by 5-10°C for good layer adhesion. Category: Hand Tools
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
For a 28mm scale steampunk foam building project I designed this boiler set. Designed in meshmixer so files can be a bit large for the models you get. Printed in resin at 0.05 layerheight
The plumber noticed a knob was missing when the boiler was serviced so a simple functional print was required. Print instructions PLA 5% infill
Link to new conversion nut that works with the new heaters on older machines. https://www.espressocare.com/products/item/la-pavoni-heating-element-flange-pre82 The removal tool requires m3 bolts to be slid into the holes on the tool and…
While the model of the Rügen Kleinbahn 52 Mh (LGB 28005) had a cover plate included by the factory, LGB forgot/ignored this detail for the 53 Mh (LGB 28006). Anyway, I wanted some details for my boiler's backhead while not muting the…
I edited the Knob from madbot to fit my boiler better. The inside part broke off and i glued it back on with construction glue, now it works perfectly. This thing was made with Tinkercad. Edit it online…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This fridge magnet is designed to have an 8mm x 2mm neodymium rare earth magnet glued to the back to allow for proper mounting next to the clips, pen holders, calendars, and other bling on your fridge. No supports are needed, however,…
The end piece of the chimney on my current gas condensing boiler broke (it became brittle), and I couldn’t find a replacement part sold separately - only the entire chimney with the attached end piece. To solve this, I created this end…
Description Crimper jaws and spacers to help with crimping the TE 160783-7 Gaggia boiler terminal connectors. While the wire connection can be crimped with a standard open-barrel terminal crimper such as the Engineer PA-20 in multiple…
Cut whole or rest of original shaft, drill 5mm hole with 3mm diameter and insert rod. Shaft is cut so carefully insert to match old values, e.g. on 0. Designed to be little loose in order to easy future removal. Tested in PLA and PET.…
Purdue Boilermakers Oversized Necklace Logo that I designed. I hope you enjoy!
Hole radius 6mm (Otvor o průměru 6mm)
It's a shower head holder mounted on the boiler (water heater) housing using zipties. Print instructions Category: Bathroom Summary It's a shower head holder mounted on the boiler (water heater) housing using zipties.
no supports required, but may require a brim/raft for bed adhesion, ensure to print it laying flat on its back (see photo for reference)
Reflektor für Kesselfeuer einer Modellbahn in Spur IIm. Vorgesehen für 2 LEDs. Reflector for the boiler fire of a model railroad in G-Scale. Designed for 2 LEDs. Print instructions Unassociated tags: Boiler fire, LED Reflektor Category:…
This key fits on the square of the water refill valve on a Vaillant gas boiler atmoTEC Plus. Makes opening and closing the refill valve easier without the need for pliers or wrenches. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Just like the previous project, the external protection of the chimney from the current condensing gas boiler was destroyed (became brittle). In this case, I found the piece separately, but I preferred to print it because it was very…
PL: Stworzyłem nowe pokrętło do mojego bojlera, ze względu na fakt ze tamto było całkowicie nie praktyczne i ciężko było obracać. ENG: I created a new knob for my boiler because the previous one was completely impractical and hard to turn.
Dosing Funnel for a Breville Dual Boiler with holes for 6x3mm magnets. Be sure to insert a pause command after layer 130 (no glue required). Fits anything similar to the Normcore Bottomless Portafilter for the Breville Dual Boiler. I…
An exercise from Modern Graphics Communication 5th edition. Exercise 3.10.
If you have one of those aliexpress smart switches for a boiler, I've made this box to fix it to the wall if the wires aren't indented to the wall.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed steampunk-style boiler contraption featuring…
Manopola per Rubinetto di Riempimento Caldaia, con innesto a mezzaluna adatto per molte marche. Stampato in PLA+ con minimo 3 pareti riempimento 20/30% e 3 strati solidi sotto e sopra
This chappie is a masterpiece of Cogwork instability: A Brine Lung is an ancient steam engine designed to pump the silt out of the deeper channels, but most of 'em are running on fumes these days. They hiss, they clank, and they vent…
This adapter is designed to mount directly onto the pressure relief / non-return valve of a boiler using a 1/2” BSPP thread . Its purpose is to unlock the valve and speed up boiler draining , making disassembly and maintenance much easier…
As it is.. Category: Replacement Parts
Spare part for grandma's steam iron. The plastic part of the plug of the boiler is broken off. I was worried because the sealing plug gets a little hot and when you open it, hot steam can escape. But after a few uses, the replacement part…
reuploaded from my thingiverse account that I am now leaving behind as I migrate onto Printables
When smart lock fails, simple friction based lock is great replacement. Hole is not centered and it should be installed like in the first picture (thicker part facing down).
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Scans of the boilers and groups of the Gaggia Clasic and KitchenAid Pro Line.
Replacement handle for a tamper so it fits inside the bdb magnetic holder. Category: Kitchen & Dining
It is designed for 2 or 3 9 x 18 x 5mm magnets designed
This is a sign for hanging on your boiler room. You may want to scale it bigger. Keeping the thickness to 5-7mm seems good for my use.
Kryt tělesa na bojler Viessmann Vytvořil jsem kryt na těleso pro bojler značky Viessmann . Na základě naměřeného originálního kusu, jsem jej následně vymodeloval ve Fusionu 360 . Na horní straně krytu se nachází logo značky Viessmann.…
The original knob kept slipping off, due to an oddly chosen conical shape to fit on the straight edges on the tap. So i made a big ol' knob that screws on much tighter.
I produced this pipe fitting to connect the high pressure discharge hose to the boiler discharge hose. Kombi tahliye hortumuna yüksek basınç tahliye hortumunu bağlamak için çatallı bu boru ekleme parçasını ürettim.
I made this for my friend so its easier to remove the boiler cap. I unfortunatly dont have any photos
These replacement feet for the Breville/Sage Dual Boiler espresso machine (BES920) are in two versions: original, and with tabs (and raised slightly) for securing the espresso machine down on a benchtop/workbench in a mobile environment.…
A replacement switch for the Grohe RED system. Print with 0.25mm nozzle for perfect fit (needs to be pushed int).
boiler knob and battery door for my grandmother. For now i did't have the photo, i forgot to take them and pieces are installed on her boiler now. when i can i will upload.
Got tired of hearing the noise the water drops make when the boiler is heating up at night? This is the solution! I also uploaded other parts needed to mount it to the wall, in case you need/want to replace more than one part. Print…
I modeled a new case for the electronics of one of my solenoid valves in my boiler that was falling apart.
Designed for G3 Ferrari “ Bolle Blu ” model boiler I Designed this cap to protect the contacts of the boiler base to prevent them from being touched and to leave it installed. Cap Dimensions: Ø48.5 mm h 20 mm ---- It's always tea-time
Layer height 0.25 Supports YES PLA material Fill 10-15%
De Longhi ec201 - Boiler supports on the right and left side PLA CF - ASA - ABS
The insulation cover of the hot water boiler slides all the time almost touching the floor tiles. I had to make these supports to get rid of the problem. The diameter of the cylinder is 670mm, now the insulation cover is at the required…
the Button of a friends Turmix CX120 broke and needed to be recreated. I printed it with PETG, but as there is not much heat, maybe also PLA is sufficient.
This is a replacement screw cap for the Baxi Gas Boiler. The condensate trap has a screw that you can unscrew if you want to flush and clean it. The original one had formed a crack and was leaking condensate water. After measuring the…
The shalf is a remake of the La Pavoni Mignon/Europiccola/Professional boiler cap. It covers the shalf only, please use the handles from original model designed by @SveinHa The shalf is without the holes on the bottom and instead has the…
Termeks boiler board holder. yes, no holes, but I'll improve
Our Stiebel Eltron HT 80 S Boiler Knob was broken, so I made a new one. If you do a color change where the arrow cutout starts, you get a nice indicator. Note: I already fixed the mistake in the image. The file you download is correct.…
Cover system designed specifically for standard Nisko electrical wall switches. INCLUDED VARIANTS: Single Module Cutout: Centered opening sized for a standard 1-module switch. Double Module Cutout: Centered opening sized for 2 modules.…
Agriculture, Furniture, Interior design
Agriculture, Furniture, Interior design
The spring was broken, did not find s.th. adequate, so I designed a new opening hook which works fine finally. The mounted hook replaced the function of the spring. My design artworks in TinkerCad needed three rounds to get it perfectly…
Habe es in PETG und mit 0.15 mm Auflösung stehend auf einem Prusa Mini gedruckt
The Sage/Breville Dual Boiler has an awkward top-side filling basin that drains into the machine's water tank. The design of the basin always leaves some residual water that doesn't fully drain, which then dries into water stains. It…
Replacement boiler cap knob for older cremina and la pavoni espresso machines. This model was created from measurements off original knobs from both machines. The only difference between the cremina and pavoni knob is the size of the…
This is a replacement cap for the fill gauge cover for a 10L water boiler or urn. The component was for a Von Sheff model, but there appear to be identical urns sold under a other brands, such as Lloytron and Oypla. The original cap has a…
Adapter for drain water from water heater with adjustable screw pipe size 1/2" Print 0.12 with support. Material ANY You need a screw 3x25 or long
Nach 12 Jahren begann die Lambdasonde meines Pellet Kessels von Buderus im Betrieb davonzudriften, sie meldete während des Brennprozesses Werte von 12% bis 19% Sauerstoff, statt der geforderten 6%. Ich orderte die Original Bosch/Buderus…
This is version 2 of my RC for an analog boiler. I wanted the Pi4 from the first version for more advanced applications so i used this time a Raspberry Pi Zero 2 WH (with WIFI) and constructed an enclosed encasement with a mount and a…
Just a shower head. Print face down on the build plate with Z Hop or Lift set to 1mm for at least the first 5 layers. Print with filaments that can tolerate your water temperature. I used PETG. Do not over-tighten.
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
This chappie is a masterpiece of Cogwork instability: A Brine Lung is an ancient steam engine designed to pump the silt out of the deeper channels, but most of 'em are running on fumes these days. They hiss, they clank, and they vent…
This adapter is designed to mount directly onto the pressure relief / non-return valve of a boiler using a 1/2” BSPP thread . Its purpose is to unlock the valve and speed up boiler draining , making disassembly and maintenance much easier…
PL: Stworzyłem nowe pokrętło do mojego bojlera, ze względu na fakt ze tamto było całkowicie nie praktyczne i ciężko było obracać. ENG: I created a new knob for my boiler because the previous one was completely impractical and hard to turn.
Our Stiebel Eltron HT 80 S Boiler Knob was broken, so I made a new one. If you do a color change where the arrow cutout starts, you get a nice indicator. Note: I already fixed the mistake in the image. The file you download is correct.…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…