1,897 models
Check the Screwiverse Remixes for other attachments designed for these threaded inserts. These don't fit when the original HSW base/hollow inserts were printed highly overextruded. This is actually something I'd like them to do (that's…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…
Print approx. €9.15–€11.18 excl. taxPreliminary estimate for one variant
I have an older Cooler Master CM 690 II Advanced that I still like a lot but it lacks space for intake fans like modern cases. These brackets allow for a 120mm fan to be mounted along with one disc drive in the 5.25" bays. This helps push…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
Minimal design. Maximum strength. 📐 Dimensions (for your model page) Plank size used (based on your drawing): • Width: 12.6 cm • Height: 8 cm • Length: Optional / customizable Slot in the printed part is designed to match: • Slot width:…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
Larger Brackets for Phones up to 1cm thick. 4cm wide cut out in the bottom bracket to fit off-center charging ports Only the changed bracket object files are hosted here. Visit the original model posting by @ Duane to get all the…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for PETGSource material: PET
This model is perfect for showcasing your Commodore 64 and keeping it ready for use! It works well with both vintage and the new C64 Ultimate bread bin style Commodore 64s. Plus, it’s a quick and easy print without any supports, which…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
Simple print, these two brackets give the scope a slight downwards angle so that it can be mounted higher up (I have mine over my monitor). The scope clicks into these brackets and is very firmly held in place. Let me know if you like…
Print approx. €6.51–€7.96 excl. taxPreliminary estimate for PETGSource material: PET
Designed this printable wall shelf bracket similar in size and function to the metal shelf brackets available from Ikea. Print file and maker file attached are for prints using PLA, which works very well and is more rigid that PETG.…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for one variant
Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Creative Pebble Pro mounts designed to fit onto an RSeat P1 simrig. Use 3M foam tape to mount the speakers to the brackets. You will need 6 M3x10 socket head cap screws. They will cut threads into the plastic and are plenty strong enough…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
Alesis E-Drum Wall Mount Bracket. Cymbals, Drum Heads, and Module Bracket used to attach single E-Drum Head to wall. Mount Your Alesis Edrum Kit to a wall to save space. Play it standing up or sitting down. Make Sure Bracket Screws into…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Shelf 300x80x15 with mounting brackets. It is an absolutely great solution for displaying things. It does not need to be painted, it can also be outdoors.…
Print approx. €8.29–€10.13 excl. taxPreliminary estimate for one variant
I bought a new fridge and unfortunately it didn't have a bottle holder, I used the one from the old fridge, but the measurements weren't right, it was 2 centimeters smaller. I designed this bracket and now it's perfect.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Parameterized model for brackets to mount cardboard cat scratchers. Model provided is based on a scratcher from Vibrant Life (18"x5"x1.5"). Also includes shims for a perfect fit. Model show was printed using Spectra Blue Easy PLA from…
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis…
3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/161705#profileId-182405 Collection of brackets and braces of different sizes and types. NON-COUNTERSUNK version here:…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
These brackets were built with the purpose of storing the maximum amount of filament in the least space possible (the unused area to the side of my printer) while also bringing a little flair and color coordination to my LACK stack. Each…
This shelf bracket was designed by me, I am an architecture student and I love creating models of elements related to architecture. You can check out my profile to find more models like this. You can print them very easily, not many…
When I did a big upgrade to my CNC router I needed a bigger drag chain. Since I couldn't find an existing one that I like I designed my own. I really wanted to have removable closing clips and that's also the main feature of my design.…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
BOM: Printed with ROSA3D High Speed PLA Light Gray A comprehensive collection of solid, reinforced corner brackets designed for structural projects, DIY repairs, woodworking, or 3D printer frames. Key Features: Reinforced Structure:…
Build your own modular shelving system! Turn simple wooden boards into a practical, customizable shelving unit with these 3D-printable modular shelf brackets . Designed for makers, workshops, garages, desks, and home organization, this…
Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…
I needed some shelf space in my office, and I have been fascinated by French cleat mounting systems, so I came up with this simple design that provides a strong mount and hides the mounting screws. I probably over engineered it with 6…
Please refer to the image file attached for parts reference. Included Brackets and hinges are; Split Friction Hinge (hinge 1) Heavy Duty Hinge (hinge 2) Adhesive Mount Hinge (hinge 3) Friction Hinge (hinge 4 - print in place) Corner…
The drawing for the bracket is located in “Other Files” as pdf. You need a more stable bracket or an other hole dimension? Feel free to leave me a comment.
Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. If you don't like the cable/PTFE management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…
2020 / 3030 / 4040 T-Slot Framing Structural Brackets Ideal for use in 3D printers, CNC machines, laser cutters, enclosures, and other DIY frame structures. Suitable for: 2020 3030 4040 All our designs are free to download and use—because…
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…
These Brackets are a Remix of my original design: https://www.printables.com/de/model/420879-corner-bracket-v2-optimized-for-3d-printing no support, no bridging, strong design They are special designed for 2020 or 4040 Alu profiles. They…
Hi There. I share these brackets that I made for a shelf. They could be strong as the design maximizes the weight it can carry while minimizing the material in the bracket itself. As Always there is also the Fusion 360 Archive in case you…
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/167900#profileId-201468 Collection of brackets and braces of different sizes and types. This is a modified version of the original Ultimate…
Super strong corners for use on 2020 or 2040 extrusions.
If you are searching for this it's probably because you also purchased a spider v2 hotend only to discover that, much like a lot with the neo, it wasn't actually compatible out of the box . The spider hotend is 5.5mm higher up on the…
Size Dimensions (Length x Height) Width / Thickness Mounting Hole Diameter Large 22.0 cm x 22.0 cm 4.80 cm 0.6 cm (6 mm) Medium 17.6 cm x 17.6 cm 3.80 cm 0.5 cm (5 mm) Small 13.2 cm x 13.2 cm 2.88 cm 0.4 cm (4 mm)
Okay, so the box I made for wrangling all the little packets and spice bags in our kitchen cupboards ended up being a bit flimsy for the job. But rather than abandon it, I thought I'd try making some reinforcements and send this soldier…
I made a holder for the wooden slats on the terrace.
Mount for fixing Thrustmaster T-LCM pedals to your Playseat Challenge. Print 4 brackets, screw them to the pedal base and fix it with zip-ties. Done! You need more simracing parts? Hace a look:…
I wanted to add some lighting to my IKEA Lack Enclosure and decided to go with some LED strips from Amazon. I also wanted to angle these so that they pointed towards the printer, even those mounted on the under side of the lid when it was…
At the time I am posting these, Multiboard only has brackets up to 2x2. I wanted something larger so I came up with these. They attach using the large Multiboard bolts. Use the 9mm Flat Head if you are putting the Multigrid Base Plate on…
Compatible with: Extruder: M3202 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers M3204 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers (Linear Rail Edition)…
My wife likes Victorian things, and we found these awesome faux-Victorian iron shelf brackets in a shop a while back. I needed to make some small shelves for the same area of the living room so I decided to make some smaller brackets in…
I was looking for corner brackets and found the great design by 3D Workspace (https://www.printables.com/model/113989-corner-bracket-optimized-for-3d-printing), however it didn't fit the dimensions I was looking for. So I decided to…
Hello dear community! Golkun did a really nice job by designing these very nice corner brackets. I only got M4 bolts & nuts so I've decided to remix this part. After playing around I've added some designchanges to get rid of the…
INGCO 20V (P20S) power tool bracket / mount, for holding/hanging your tools in your workshop space. VERSION 2.0 Improved version of this: https://www.printables.com/model/299468-ingco-20v-tool-workshop-holders-brackets Better fit,…
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
I created a bracket so I can easily fix our bike chargers on the wall in the garage: e-bike charger for a Brose motor (on a Spike Cycle) e-bike charger for a Bosch motor (performance Cx) e-bike charger for Qwic motor (FN7 urban bike)…
My wife wanted to be able to customize our drawers in the kitchen. She found some ideas on Pinterest, but I decided to make a system for all of our drawers. We purchased some poplar planks (1/4" x 2 1/2" x 48") and cut them to the various…
Brackets for joining 120mm fans together. Join fans in many configurations for different applications
These are brackets for the gen3 StarLink router and power supply. We used them for an install in one of the lower compartments in our RV. The openings on either side of the power supply bracket are for tucking the excess cables into.
Used provided parametric Fusion360 file and created brackets for Ikea's Koppla power strip.
The 2 parts are printed standing upright on the back face without the need for support. You can mount them using 2-3 wood screws or double sided tape. The geometry is designed to guide the keyboard in for easy storage. The maximum…
Hook part extended by 5mm on both mounts. Category: Computer
Simple Bracket to relocate your X-Gantry Cable. Solve problem with cable being in the way. Allows better travel of the cable. You will need to reroute existing cable from underneath the printer to use this bracket. I have included several…
5-2-2021 - Added Night City Police Department (Cyberpunk) Themed Rail and Slider 3 parts: Badge Slider - A , Badge Slider - B , NCPD Rail . Note ! Slider has to be assembled with small screws. 12-3-2020 - Added Phanteks Rail Custom GPU…
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Secure cardboard at fixed angles. Each bracket to be used in conjunction with 2x Makedo…
A simple corner bracket for 5mm foam core board. I wanted something a little better for taking pictures but didn't want to spend a ton of money. I picked up the foam core boards from walmart for a couple of dollars each and it did the…
I made these specifically for my "Light up your drawers" project - https://www.prusaprinters.org/prints/138475-magnetic-hall-sensor-led-strip-switch-light-up-you - where I feature a Hall Effect magnetic switch to control the LED Strip . I…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
Compatible with: Extruder : SKU M3301 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: Various Options 3D Printer Model: CR-10 CR-10s…
I wanted a dead simple top mount for my Sturdy Bunny v2 ERCF without using any 2020 extrusion. Taking inspiration from jeoje's Sturdy Handles I made two platforms that mount to the frame using a single M5 roll-in nut and M5x10 bolt.…
The PSU mounting brackets included in the Lack enclosure files don't accommodate the 5 cm wider PSU that ships with the MK4 from Delta Electronics (model #PMZ-24V240WDAL). The original brackets consist of two parts. The larger, bottom…
I wanted a way to display my diecast collection and i knew many people needed this as well so i created these brackets that will use the hotwheels tracks to diplay 18-20 cars (depending on the size) 3-tier bleacher style hotwheels tracks…
Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
Print a pair of these brackets and set a standard Schedule 40 3/4" diameter PVC pipe on them for a simple and strong wall-mounted spool holder. The spacing between the brackets and PVC pipe length are your choice. Schedule 40 3/4" pipe is…
I did not intent originaly to publish those, but I was asked to do so. Here we have a wall mounted brackets for the MCRN ships: Morrigan Class Corvette Class Orion Class All three are designed to be mounted directly to the wall with 3…
Screw-less wire organising brackets / clips for (Misumi 2020) extrusions with minimal printing and installation time. Use these as to make easy, clean and serviceable wiring. Can be used as alternative wiring organisation solution if you…
Updated model here: https://www.printables.com/model/308083-ingco-20v-tool-workshop-holders-brackets-v2 INGCO 20V (P20S) power tool bracket / mount, for holding/hanging your tools in your workshop space. Can be mounted upside down…
I could not leave well enough alone. I wanted a set of PVC pipe fittings that I could use as a shelf. While the previous version of my enclosure brackets worked, I wanted to see if I could trim the print time and make something that…
I guess Govee doesn't want to sell accessories separately, so I've modelled both style of brackets that originally came with the light bar. Mount Govee light bars to clamp style monitor stands. I use the light bars as desk lamps, so the…
A quick and simple mounting bracket for 775 DC Motors. Two versions. One simple and one reinforced. My application did not require a lot of torque so this printed on PETG suffices for me. * UPDATE 2020-Oct-01 * Fixed dimensions I was not…
3 separate brackets for typical 210mm, 190mm and 170mm diameter saucepan lids. Designed to be attached with 3.5mm x 16mm Countersunk Screws to cupboard doors and free up shelf space
Wsporniki ułatwiające wypoziomowanie profili płyt kartonowo-gipsowych CD60. W połączeniu z laserem znacznie ułatwiają pracę, zwłaszcza w pojedynkę. I used ready-made M5 bolts and M5 nuts. Or you can use regular M5x20 screws and print…
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
Collection of brackets for 2020 (and 2040) extrusion. Additional Hardware M4x10mm socket cap screws Printing Suggestions Print face down Bed support are optional for the socket cap screw recess
Update 3: The v3 “Slim” files. Final new version for now is a pair of new files, the “slim” brackets. I trimmed some material off that may not have been necessary, speeding printing and saving material. I thickened the bases to ½" for…
I needed a set of brackets to run the input shaping tests on my Ender3 V3 KE, and Creality makes you sign up for an account… which bugged me. So I signed up, downloaded the files, and I'm posting them here in case anyone needs them. Lord…
A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…
Rotated and rounded edge removed to be printed upright without supports and better layer adhesion in direction of pull.
Shelf brackets for the Honeycomb Wall system. They stick out about 150 mm. I have included the blender model if you want to modify it to suit your needs. I also added a shelf I made. It spans 11 honeycombs. It uses m4 screws to attach to…
BOM: Printed with ROSA3D Starter PLA Retro Gray When you need to build something strong, standard flimsy brackets won't cut it. This set of heavy-duty, reinforced 90-degree corner brackets is designed for serious DIY, workshop, and…
Shroud and probe brackets for the NG Revo Extruder for the Ender 5, Ender 5 Pro and Ender 5 Plus.
A pair of these brackets lets you fix the Brennenstuhl EcoLine 6x extension cable to the underside of your desk. Make sure to push up against the extension cable when removing the plugs. Print with PETG, PLA or other filament.
I really liked the original concept but wanted shorter brackets that fit 6 gauge screws well so I modeled one from scratch. Also made a 3-panel corner bracket (otherwise you'd need 3 of the 2-panel brackets to achieve the same thing).…
Brackets to mount the ReoLink NVR to a standard 19" Network Rack. They were modeled using the RLN8-410NVR. From what I can tell, this should work with the RLN16-410 as well. *NVR side screws will need to be changed to M3x10mm
Dyson V15 accessory holders can be mounted on a vertical wall or under a shelf, allowing you to create your ideal cleaning station. You have the freedom to position your accessories vertically, horizontally, or at a 45-degree angle, all…
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
This model was essentially copied off of a standard hanging bracket from my own mini blinds that I own. The larger holes are there to allow a drill or screwdriver to reach the smaller holes for hanging. The holes on all sides are so that…
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
![M3202 Ender-5 / 5 Pro / 5 Plus [Micro Swiss NG Extruder] - Fan Shrouds and Brackets](https://media.printables.com/media/prints/752863/images/5874787_8bffd4fb-4eb5-421b-88d9-65f5b8c4600b_20be6ab3-368f-446f-9baa-60e0dd019b02/4ngender5_2400x2400.webp)
![M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/752941/images/5875415_aef71d45-79a9-45ac-914c-33f9cabdee76_1b470434-8aec-41fc-a3f6-a048b3c0addb/ngrevoender3001_2400x2400.webp)
![M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/735325/images/5748609_a9d64cd5-5eda-4399-a8be-543f085c15c6_d84847a4-8b28-4e4c-99e6-bdd8af654401/ngrevoender5001_2400x2400.webp)
