187 models
These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
A set of various sizes as well as the parametric model file. Sizes make a pleasing thick braid ~10" (25cm), 7.5" (19cm) and 5" (13cm) long. Print the test print beforehand to see if your settings are correct :). any issues please message.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
Hair Braiding tools - Hair Styling Fishbone DIY Hair Styling Tool Kit, Ponytail Maker Accessories TOOL1 TOOL2-3 TOOL4
Video Video with thread Squarebraider Video This is an advanced print with complex mechanics - if you are not experienced with printing and engineering, please start with the 2 gear (flat braider) version! Bobbin pins are 4mm so you can…
Consists of 2 different objects, which have multiple version. Jormungandr braid coil Two model version, varying in degrees of twist and tilt of head. Printed vertically 2 layer raft for bed adhesion and support of first layers. Does not…
The braided Christmas tree is an easy model to print. The tree and star need supports and concentric top surface
This is my first prototype of a 3D printed braiding machine. The machine was built by me in 2022. I have published a video about it on Youtube . In 2023, I made a major overhaul of the machine and ironed out the bugs in the prototype. You…
Here is the file for my Braid Vase model This is designed for vase mode to allow re-scaling to a size that is good for you Enjoy If you like what I am doing please consider buying me a coffee or tipping. 😁👍 Buy me a coffee
This model is compatible with the lego system.
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
Two piece braided slide hair pin. I wanted to make hair accessory that would look fun in dual color. Tested with 0.4mm nozzle Sunlu PLA+ 15% infill Layer height: 0.1 mm First layer height: 0.2mm Solid layers, top and bottom: 6 5 mm brim…
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
Even though i said that i couldnt make any more models because my pc sucks, but here i am! I couldnt bring myself to stop doing what i love. I only printed this in PLA because i dont have any PETG on my hands, unfortunately. If you print…
Lucky 13 Hair Braid Requires 00A07 Armature Clavical to be printed repeatidly to make braid.
This model is compatible with the lego system.
Tool to support creating woven bracelets - the art called kumihimo. It is an easy print - use the pre-colored .3mf file with your Prusa slicer and print this disk for your bead weaving needs. There are 32 slots around the outside of the…
This model is compatible with the lego system.
This charming gardener gnome is a delightful new addition to the whimsical gnome collection. She features a tall, pointed hat that bends gently at the top and fully covers her eyes, with only her round nose peeking out. Like the rest of…
Wall Count: As many wall counts to fill the entire part Infill: 100% infill Material: ABS/ASA
This model is compatible with the lego system.
I wanted to design this braided whip last year, but I was missing modeling skills I needed. This year it worked :) The most difficult part was to understand the pattern, because on thing is the process of making it from willow twigs and…
Paramètres d'Impression (Print Settings) Supports : NON (Le modèle est conçu pour être imprimé à plat). Matériau : PLA ou PETG (Le PETG est préférable pour sa flexibilité). Remplissage (Infill) : 15% à 20% (Cubic ou Gyroid). Hauteur de…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Einfacher Knüpfstern, mit dem ich meine Kinder ein paar Nachmittage beschäftigten konnte. STL für den 3D-Druck, oder DXF für die CNC oder den Laser. Ich habe den Stern mit dem Lasercutter hergestellt. Anleitungen zum Knüpfen siehe…
Here's an example of how to use the tool for braiding:
Saw a video of a similar hair parting tool called “The Braid Aid” by “AB Glitz” and thought this should be easy to model and print. Prints in two pieces for stability reasons. Just superglue them together. Print orientation can be seen in…
This model is compatible with the lego system.
Easy print on 0.20mm layer. Best in PETG, can be printed in PLA. no support required. Fusion360 model for your convenience
Hair tool for ponytail style and braiding. Two different sizes: Big for adults and small for children. Main Print configuration: Material: Flex PLA (this tool is meant to be flexible) Infill: 100% No supports Quality tips: Check AVOID…
This model is compatible with the lego system.
This model is compatible with the lego system.
Layerheight: 0.2mm See here for a photo of the planter with a small cactus.
This model is compatible with the lego system.
I’m starting to learn Blender. As a fun project between tutorials, I tried to challenge myself to make my own design that could be 3D printed based on what I’ve learned so far. The braids were created using Geometry Nodes. I had to edit…
This model is compatible with the lego system.
Introduction: This is a square Kumihimo plate for crafting flat braids , making it ideal for bookmarks, lanyards, and straps. For instruction on how to use this square plate, tutorials like "How to use the kumihimo square plate to make…
I designed a planter that looks like a woven basket. The dimensions of the planter are as follows: Internal dimensions: Diameter: 71mm Height: 64mm External dimensions: Diameter: 88.5mm Height: 70mm I would love to see your prints, so if…
This is a cable comb for braided PC cables. I wanted one for my graphics card and couldn't find one that was wide enough. My first design is included as well, but it is to tight for sleeved cables. Though it is perfect for regular ones ;)…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Simple braiding wheel with 8 gaps (7 strings). My daughter started braiding bracelets so I designed it mainly for kids. All edges are “filleted” so kids can easily move strings around and everything is smooth. It is 5mm thick and I am…
This model is compatible with the lego system.
This model is compatible with the lego system.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This model is compatible with the lego system.
This model is compatible with the lego system.
With a furtive start, the placement of a single tile, a winding cascade ravels the motif into the infinite. This tile is designed using Robert W. Fathauer’s method for creating monohedral tilings, with branching tiles exhibiting a fractal…
🌿 The Honest Shelf Vol. 58 // NORDIX Duo 🌿 Elevate your home styling with the perfect contrast of sharp geometry and soft, organic textures. If You are interested of my other Designs, feel free to visit me under 👉…
This model is compatible with the lego system.
edit: swapped stl with decimated one due to oversight conventional bobbins kept slipping and dropping thread so i made a bobbin that wouldnt catch on other thread while braiding when scaled can be used as a spool for the braids themselves
In https://www.thingiverse.com/make:839579 the braid piece was missing. So I modelled it from pictures.
Simple hair braiding tool 154mm long. Material: PET-G recommended for better flexibility. Layer high: 0,2 or lower No supports needed
This model is compatible with the lego system.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Fishing Braid Line Puller. Save your hands by wrapping the braid 3 times around each of the bottom parts and pull the line free. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .28 Infill: 25…
Slip the thin end under the braids and around the guide blade to hold the guide steady and your fingers clean while you clean the braids with chemicals and brushes. Use the thick end to burnish down the braids after shaping them. The…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I design this braiding star for my wife. She needed something to make a wool cord/braid for some bags. Check out this YouTube video for a demonstration of use (wooden star) - even though it's in German it should give a visual aid to using…
Braid sold for slot car pick ups is often sold in one meter lengths that you need to cut yourself. These lengths are usually sold with no container, as a loose coil, which can be a PITA to put back where it goes pretty much every time you…
This model is compatible with the lego system.
This model is compatible with the lego system.
----------------------------------------------------------- 🛠 PRINTING HELP & TROUBLESHOOTING ----------------------------------------------------------- ⚠ NOTES ⚠ • If Slicer errors and warnings appear, they should be ignored as they are…
Horse braiding comb to assist in braiding your horses
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I've been using the same Radioshack solder spool for 20 years and just refilling it when it runs out. I didn't want to give it up so I remixed the original model to cradle it. This should hold 3 desoldering braids and 2 Flux pens. The…
A beautiful chopstick holder using a braided design which holds an elegant rest in the air, carefully designed so that the model can be print in place without requiring any supports. Printing notes: I used a .20 mm layer height, but other…
This stylish 3D-printed handbag features a beautifully woven basket texture, combining modern aesthetics with classic elegance. The open-top design and rounded handles give it a sophisticated and practical look, perfect as a decorative…
https://www.youtube.com/@Wild190cart If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly…
Pequeño cuenco con patrón de trenza, para usarlo como recipiente, ya sea, de lapicero, para caramelos o un pequeño cactus o cualquier uso que le podáis dar. Es prácticamente una semiesfera, aplanada por la base. Yo lo imprimí con soportes…
IMPORTANT: This figurine has no base, so make sure to enable a wide brim in your slicer. This is essential to prevent the statue from falling or detaching from the build plate during printing! Each model is carefully print-tested. ✅ If…
This 3D model features a charming decorative female gnome, perfect for holidays or simply adding a special touch to any corner of your home. The gnome wears a pointy hat and detailed braids, with a relaxed pose that gives it a friendly…
A spiral braided design. It will print without supports. If you download or collect, please “Like”. _________________________________________________ The resin print is available for purchase at the following website: Structural Expressions
I did a three strand braid earlier, but I wanted to experiment with higher orders. It was quite a bit harder to work out. I have included the .scad code so that anyone interested can generate similar braids. faces=20; step=5;…
Want to braid a heart shaped cookie for that special someone? Or just need to scratch that Christmas itch already, with something edible? Look no further! Theres a small and a medium sized one. The small one measures 30x45mm inside, the…
BRAIDING RING BRAIDING RING BRAIDING RING 1.65 cm Diameter
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
I really liked the simplicity of this design. I needed something a little larger for my fat fingers and wanted the slot deeper so more of the cable was enclosed. I increased the diameter of the clip and indented the slot more (about 3/4…
This is just the braided bail. I modeled this up as a component for another project. I thought that it might be good to share for others who are making Baskets. This is shown upright, but it cannot print that way without support. However,…
I have several small wooden bobbins that I like because they make braiding easier. I wanted more, so I created them in TinkerCAD. Print Settings Resolution: 0.3 Infill: 40% Category: Hobby
https://www.printables.com/@Wild190 If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support, I really…
It's a vertical mount for PCB Hartk ERCF Voron 2.4 on LGX Lite You want 4 screws m3x8 and 2 heat inserts M3XD5XL4 (Standard as for the voron 2.4)
1x2 Gridfinity module for holding desoldering braid reels. Designed with a flat top for a cleaner look since other modules can't be stacked on top of this one. Print details: Printer Bambu Lab A1 0.6mm Nozzle Filament eSun ePLA-Lite ‘Cold…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
The roller is just under 3/4" wide (19mm actual width) with a "blade" that is just under 1/8"wide/thick and 4mm tall/deep. If you have an uncommon braid width and slot, feel free to contact me for a revised roller. Large handle with…
Simple cable combs that holds them at a 90° angle. The key clips in to prevent the cables from pulling out and to keep them pushed in all the way. I recommend using a softer filament like Polymaker PolyTerra for the added flex so it's…
How to use Hold with circles and grooves side facing up. Choose 7 threads, align them, and make a knot on one side Push the knot through the hole from the top, and affix all the threads on the slots at the edge. You will have one empty…
This is a 3D model of a braiding star that can be used for decorations, crafts, or creative projects. The design is simple and clean, making it easy to print on any 3D printer. You can add color change to make the numbers more visible,…
A loom for making friendship bracelets, and other string crafts and knot tying. It is for small wrists, preteen and under. 130 to 190 mm. Fully adjustable. Simply anchor the loop of your project on the end with the pin. Bring the string…
Succulents Box: Snake Plant Braid (S. Cylindrica) Not just pretty to look at, but also practical! Can be used as: jewellery box gift box sweets jar organizer of small items secret hiding spot collectible succulents - got to plant them all…
