Counting matching models…
Knob designed with attention to the best possible grip comfort. Turn the knob by 45°, depending on your prefered grip position. Hole for screw with included M4 thread. Print instructions I used PLA, but any material will do No supports…
Print model IO shield for Gigabyte GA-B320M-S2H
This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
Welcome to the 32 byte storage tray. I call it that because I'm a computer geek… Let me explain. The tray holds 256 bits. 256 bits in the computer world, is equivalent to 32 bytes. I actually accidentally ended up with 256 bits, I kept…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
Gigabyte AORUS logo transfered to STL territory.
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
Rear Io shield for the Gigabyte GA-H97-HD3
replacement io shield for A520M DS3H Category: Replacement Parts
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
https://www.instagram.com/kuleshow/ rafts - No Support -Yes (Support overhang angle 75°, this value I used when printing hcube_microSd.stl) two types of inner holder: 10 microSD + 3 SD + microsd usb adapter 10 microSD + 5 SD Companion…
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
Bracket to mount an 92mm fan on the stock cooler on the Gigabyte MJ11-EC1 Mini-ITX server motherboard. Made for M3 threaded inserts, holes are 4,0mm. Uses the stock standoffs to mount on the cooler, those are M3 as well. Countersinks for…
a low profile 4 video output bracket for the gigabyte 1650, there are no 4 output designs only 3 outputs, so I made on Print as densely as possible if possible with PETG or ABS because the low profiles are hotter, check that the screw…
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
It's a mix of 2 things. 4946834 + 5039701 = this remix (5196877) ===update/add==== 01.17.22 : add stl for TBS fusion VRX Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter Supports: Yes Resolution: 0.12…
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
Support piece I made for my Gigabyte Vision 3070 to stop it from sagging. It may work for other GPUs. Default Height between GPU and PSU Shroud is 80.6mm. Default card width is 101mm. Fusion 360 file attached.
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas pant, panty na ruzne skrinky, krabicky, truhly,... prostě na ruzný nabytek dle Vasich predstav. Tisknuto bez podpor…
🇺🇸 Welcome to Denver, the Mile High City! MiniWorld3D's founder Dany Sánchez lived in Denver for some time and created several models representing landmarks of the city. The Central Presbyterian Church of Denver, Colorado is a historic…
moddied gpu bracket, to fit gpu and psu
Fits this and probably similar motherboards
Basically just the half height version For Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL Would recommend printing using tree supports for only the half circle. The rest prints just fine.
IO plate for GIGABYTE GA-Z77X-D3H (rev 1.1) - I think it would work on other revisions as well. Fusion 360 project: https://a360.co/2HJfZyb Printed flat side down with no supports, material and quality don't matter because the print is so…
* Update 1/22/22 * Added a stretched version of the fs_buddy design so stubby antenna can fit on the sharkbyte vrx and not interfere. * Update 1/17/22 * Added file fs_buddyfor04xwcap. This file is the fan cap, with an fs buddy attached to…
Today my Fatshark Sharkbyte fpv bundle arrived. Unfortunatly the fan-mount for the reveiver unit was missing so i had to print one by myself. I´ve testet the fan-mount on Fatshark Dominator HDO2 goggels and Fatshark Dominator HD3 goggels.…
FPV camera adapter 19mm to 26mm. Originally designed to fit the Shark Byte 19mm upgraded camera body (not my design but included as an STL), the original can be found here -…
Czech Potřeboval jsem atypické klínky pod nábytek, a protože jsem je nenašel, tak jsem jich několik vytvořil v několika rozměrech. 40x8x10 mm 40x10x8 mm 40x15x10 mm 50x8x10 mm 50x10x8 mm 50x15x10 mm 80x10x8 mm 80x15x8 mm English I needed…
My backplate for Gigabyte motherboard B450M DS3H (rev. 1.x). Number of walls 3, layer height 0.2 mm, infill 15%, 0.4mm nozzle, no supports.
I built a computer for my father a few years back that was missing an IO-Shield. I figured I might share. Also includes a Rick Silhouette with “Peace Among Worlds” :D Fits this Motherboard: Gigabyte-B250M-DS3H…
I modeled this shield after the motherboard dimensions. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. The photo was taken before…
Dvoudílná cívka na zbytky filamentu. Díky možnosti rozšroubování lze jen nasadit už smotané zbytky filamentu bez nutnosti převíjení. Úzká varianta má zhruba poloviční šířku než široká. Velká cívka má prostor pro filament asi 2x vyšší než…
Couldn't find a case for this obscure Meshtastic compatible board, so I made one, here you go. Autodesk Fusion and STEP files included, remixes welcome. Hardware required: 2pcs. M2 screws + heat set inserts (the case snaps together,…
An IO Shield replacement for the Gigabyte B250M-DS3H based of Paul Bibb's model
A sliding hard drive rail for 3.5" drives. This is an extended length version designed for primarily for shucked disks which only have 2 instead of the typical 3 screw holes on either side. The rails which are included with the cases I…
BACK PLATE 3D PRINT 2 COLORS AND LASER CUT TO ADD ARGB LIGHT
used regular .2mm print profile print with supports backplate is optional
I designed this extension to turn a gigabyte brix mini pc into a pfsense router. I will add more details at a later date. Just posting it to share with someone.
I made a vertical stand for my BRIX PC. I use a GB-BER3-5400, but some other models should fit too. It should print fine with supports enabled. The fit on my machine is great, just slightly snug. The part does not fall off the PC when…
Again a classic second hand case, the motherboard arrived but not the io shield. I made a simple drawing on Tinkercad and tested it, it's not perfect but it will work. Use it as you want completely free :)
Asus ROG - AORUS Gigabyte Keychain - Alienware Dell - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
Made an IO shield for a Barracuda Web Filter 310 (BYF310a) and a Gigabyte H110M-H motherboard. It might fit other Barracuda devices and can be a good starting point for customizing it to other motherboards as well. Instead of designing…
Make the perfect addition for your desk with this stylish dock for your hard drive! Built specifically for the WD My Passport external hard drive, our dock gives easy access to put your drive in and take it out easily. Our dock is open on…
❣I had come into a Gigabyte G1 Sniper Z87 Motherboard, unfortunately it was without the I/O shield. I modeled this one up as a replacement to use the board in a build. Unfortunately, I didn't take any pictures of it installed while I had…
This is an IO shield for a GIGABYTE GA-Z97M-D3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
I designed these brackets to mount a Gigabyte Aero Geforce RTX 4090 in a Hyte Y60 case. The standard vertical mounting position for this case will leave the RTX 4090's fans pressed very close to the glass, which restricts airflow. This…
mobo io shield Category: 3D Printing
I wondered why fabric models always have loads of MBytes since they mostly consist of small identic parts. So I tried to reduce filesize of a printable fabric as a fun project and ended up with around 6 KByte for a simple model (…
I designed a small wallart of Gigabytes Aorus logo. It has a raceway for a RGB LED Strip (see pic 2) and four mounting holes for screws. Its dimensions are 290x295mm so it can easily be printed with a 300x300 mm 3D printer. I highly…
These are the parts I have come up with so far for the Five33 switchback HD frame . I am flying with Sharkbyte so I won't have any DJI designs in here. The original VTX antenna mounts will work for this frame as well. You can find them on…
A remix from Tiny Compliant Fidget Toy This multi-stable mechanism has 256 different states. It's a physical byte , and it's equivalent to an 8-bits DIP switch used in electronics. As the author of the original design says, bistable…
Inspired by optimumtech's recent YouTube video, I decided to also try a 4060 LP build. However, my printer isn't tuned in right, so I needed something that is a bit less fragile and very easy to print. I also didn't want to use a riser,…
Firstly, a disclaimer: This is my first serious project made in CAD software, I am a novice at this so the model might not be 100% perfect. I will be refining the design later on so any feedback is appreciated. Do this mod at your own…
Nábytek pro panenky, stůl je tisknut nohama nahoru, židle vyžaduje límec a podpěry. Tisknuto s PLA
BOM M3 x L6 Screws (4 pcs) M3 x L8 Screw (1 pc) M3 x L4 x OD5 Heat-set Insert nut (1 pc)
Made this covers per request and got permission to publish. 3 versions with bit different logo designs. I printed them with clear Extrudr PETG on the bottom and black PETG on top. On the bottom parts I used a variation of the…
PCUSA Cross for you to use in any projects. Enjoy.
Wanted to improve temperatures and noise on this GPU, fresh bought, no test before, because I done this mod before on other gpus I go straight forward to design / print. The stock fans are 10mm tall, 2x 92mm and 1x 80mm, very weak blade…
Adapter that will make this light ( https://princetontec.com/product/byte-tactical/ ) fit into the ACH Rhino Mount/NVG Mount. It uses a pen spring to pressure fit into the slot. Recommend to print in ABS/ASA since it's a part expected to…
Gigabyte GA-D525TUD IO Shield
GIGABYTE RTX 4070 Fan Filter Made this since I currently have an open bench setup. Requires 3x M3*6 screws Printed in PETG to test but may require a different filament for long term. You will need a 256x256mm bed or larger to fit this…
You will need: 4 × Noctua NF-A4x10 12V PWM fans (for both ASUS and Gigabyte versions) 1 × M2 self-tapping screw (only for the Gigabyte version ) You need to modify the fan cables — please check the pictures I uploaded. I made a custom…
Meet BYTE — your compact companion from the Spindlelands! Byte is a utility-class ModBot built for scanning, scouting, and assisting with field diagnostics. This free model kicks off the ModBots universe — a world of post-industrial bots,…
@6d6178 @snail Challenge accepted. This attached STL contain all of the required 80 bytes STL file header and 4 bytes reserved for unsigned integer. This is CAN NOT be printed nor sliced, But can be examined to ensure it contains the…
This is a logo plate I made for someone as a custom led logo. With permission to publish this. Print settings: bottom part is 3mm, should be printed with clear filament, I used Extruder PETG. Top is 1mm black PETG. Use M600 to change the…
Requirements: 4x M4 threaded inserts 1x Included VESA mounting plate and bolts I printed mine in Bambulab PLA-CF and it works very well. The power brick will be sticking out of the back, as it is otherwise too long to fit without the…
Compatible ioplate for motherboard Huananzhi x79 Deluxe
Simple ATX IO shield for the motherboard.
I/O Shield For Gigabyte GA-H170N-WIFI motherboard
VESA adapter for LG Quickrelease to a Gigabyte Monitor. I used this for mounting my 32" OLED from Gigabyte to a LG ERGO stand. Disclaimer: This 3D model is provided "as is" without any warranties. The creator shall not be held responsible…
Bracket for mounting Gigabyte RTX 5060 LP
Just trying it out, if it gets 20 downloads i will post more
Alternative case for the eByte nRF52840 dongles. Ears are buttons! Compatible with multi-material (not shown in photos) Normally on these dongles, the buttons are not exposed. This makes it easier to use them ^w^ Top and bottom snap…
Layer height: 0.2mm Bill of materials 3 Noctua NF-A9 PWM chromax.black.swap Arctic 4-Pin PWM Fan Splitter Cable (to daizy cain the fans) 4-Pin PWM adapter to small 4-Pin (to connect the fans to the GPU mainboard) 4 additional black fan…
Gigabyte themed contoured fridge magnet. A clean and simple design with a 3D extruded logo. Print in a single colour for a simple solid coloured magnet or print in 2 colours for a contrasting 3D effect. For those of us who do not have a…
If you find yourself wanting to mount a HD Zero VRx to some flat surface somewhere. Maybe a multiiview set up or a ground station. Then this is the bracket you need. Enjoy! Special thanks to Mr David Owens. Who drew the original, that I…
A lighter case designed to fit a standard size Bic lighter adorned with the words "Megabyte Me" in retro computer font.
A motherboard shroud for the (arguably) ugly gigabyte b550 ud ac atx am4. It does require you to remove your gpu and cpu cooler cables But other than that it is quite simple! I am hoping that this model will help shine some light on what…
You can write your name, most used password (what can go wrong), phone number, favorite joke… on this 16 bytes keyring punch card. If you print many, and thread them, you can even carry an entire book of information. Poke through and the…
Couldn't mount the monitor to my monitor arm and didn't have any spacers that I trusted so I made something better. WARNING: I'm not responsible for any poor mounting or damage.
Zkonstruováno jako příslušenství k https://www.nabytek-polak.cz/ Žádné podpěry. Pořadač se tiskne v normální pozici. Stejně tak zámeček. Pouze lišta s háčky se tiskne vzhůru nohama a na pořadač se musí přilepit. Připraveno na…
Update: Higher position and further away from screen for less bleed on screen. Since the back base of the monitor is thick the original mount won't hold on it without this adapter. It is a snug fit on the monitor, so the adapter plate…
Toutes les pièces imprimables en 3D fourni sont uniquement esthétiques. Pour reproduire ce petit camion de franchissement vous aurez besoin du châssis du crx18 6x6 de chez hobbytech, de quelques visses ou de colle forte, le reste des…
This is my version of a direct drive extruder. You will need to strengthen the part with the spring-loaded lever, if you want to use it Sources are included - please, send me your modifications. It is optimized for the following aspects:…
I didn't like the Heat_it device that comes with clamps on the side, as it has received negative feedback on Amazon. However, I found a smaller version (referred to as the 2021 version) on the manufacturer's eBay shop, which includes a…
Screwdriver Byte Holder for DIN Rail It can hold 8 screwdriver bits, so it is a byte holder. Can be mounted on a standard DIN Rail.
Dust/Beauty cover for the bottom row header pins/plugs on the Gigabyte X870E AORUS Elite motherboard
Background I would like to use the WiFi card with a small form factor tower but unfortunately it does not come with a low profile bracket and as such it doesn't fit in the PC, so I remixed haavardoks low profile bracket model to fit this…
Uchwyt anti-sag do karty graficznej Gigabyte GeForce RTX 4070 AERO OC, zaprojektowany w celu zapobiegania wyginaniu PCB pod ciężarem chłodzenia, szczególnie podczas transportu komputera. Wydruk wykonano na drukarce Creality Ender-3 V3 SE,…
backplate for GIGABYTE RTX 3050 LP only! for covering gpu from dust not to make any improvement or performance print downward (text on heat bed) apply support for screw holes only better print using PETG or ABS
I bought a B560M DS3H V3 off eBay without an IO shield so I made my own. Printed on Flashforge 5M from PLA+
My friend and I made a custom Monopoly set for our College Christian Group. He had the custom board made and I made the custom hotel (this piece) and houses.
I lost my Gigabyte ECO600 wireless mouse battery cover a while ago. Finally made a replacement. It took 3 tries to finally get it to fit nicely. Settings: Supports: no raft: no Print Settings Printer Brand: FlashForge Printer: Guider II…
