Search results: cases

Sort order

607 models

P
PrintablesAlvomane

High capacity bitholder for MiniWare ES15 cases | MiniWare ES15 Bithalter mit hoher Kapazität

These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
280
Likes
39
Rating
4
P
PrintablesMatthewGTaylor

Phone Stand - prints great - works with most cases

Desktop phone stand. Simple and robust. Fits naked phones and cases up to 14mm (0.55") thick. Also works with Loopy cases and Popsockets. Works in portrait and landscape mode. Slightly improved over the previously posted version. Print…

Print approx. €3.53–€4.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
3
Rating
0
P
Printablessam krei

Hotwheels RLC acrylic cases bracket

FINALLY! A cheap and easy way to stack my RLC acrylic case cars. This is a simple bracket that will allow you to stack any RLC acrylic cases on top of each other avoiding that annoying wiggle and slanted look.

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
5
Rating
0
P
PrintablesTache

Prusa Mount for Squirrelbrain's Raspberry Pi Cases

This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
4
Rating
5
P
PrintablesCardinalSong

Eurorack Guitar Pedal Hanger for Hammond Cases

This unit allows you to connect and mount your guitar pedals (with Hammond 1590 cases) within your eurorack system. The pedal case uses it's existing screws to mount to the hanger. It's tricky mounting the top screws to the eurorack…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
6
Rating
0
P
PrintablesVictronix

iPhone 16, 16e, 16 Plus, 16 Pro and 16 Pro Max cases

iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…

Downloads
15,421
Likes
398
Rating
4.7
P
PrintablesVictronix

iPhone 17, 17e, 17 Air, 17 Pro and 17 Pro Max cases

iPhone 17, iPhone 17e, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max cases Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. Two variants available - thin with camera border and regular (thick) -…

Downloads
9,170
Likes
209
Rating
4.94
P
PrintablesRJCDesigns

Travel/Disposable Child Safe Knife, Fork and Spoon Kit Card + Carry Cases

Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…

Downloads
7,747
Likes
1,991
Rating
4.9
P
PrintablesVictronix

Galaxy S25, S25 Plus, S25 Ultra, S25 FE cases (TPU or PLA)

Galaxy S25, S25 Plus and S25 Ultra cases, to be printed in TPU or PLA of your choice. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. Edit on 2 Feb 2025: USB opening increased to…

Downloads
7,707
Likes
346
Rating
4.89
P
PrintablesTonyG

TTGO LoRa32 v2.1.1.6 *and* T3S3 cases for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
5,034
Likes
360
Rating
4.81
P
PrintablesVictronix

Galaxy S24, S24 Plus, FE and Ultra cases, MagSafe option

Galaxy S24, S24 Plus, FE and Ultra cases, to be printed in TPU of your choice. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. edit on 12 Oct 2024: Added Galaxy S24 FE case. Added…

Downloads
4,833
Likes
178
Rating
4.92
P
Printablesfuchsr

Customizable Print-in-Place Cases for Button and Cylindrical Batteries

Print-in-place model to hold button-style or cylindrical batteries. Some example models are included, and the OpenSCAD source code is provided, for full customization. Instructions below are for button-style batteries. The version for…

Downloads
4,662
Likes
1,613
Rating
4.93
P
PrintablesAlley Cat

Heltec LoRa 32 V3 HT Slim Cases

Update 24 April 2025: Added a 3k version with internal antenna space and no SMA. Update 30 July 2024: Added desk mounts and Baofeng clips that take M2.5 nuts. Commercial Use and Attribution Notice: Alley Chat HT Slim © 2024 by Alley Cat…

Downloads
4,112
Likes
508
Rating
4.97
P
PrintablesPopandsicle

Latching Pokémon Trading Card Cases (Fits Sleeved Cards and Top Loaders!)

Looking for an attractive and flexible storage system to organize and protect your trading cards? Don't banish your hard sought collectibles to flimsy generic cardboard boxes in the back of your closet, store them in style in these…

Downloads
3,895
Likes
751
Rating
4.94
P
PrintablesLinus Tech Tips

LTT CPU Cases

They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…

Downloads
3,281
Likes
592
Rating
4.91
P
PrintablesVictronix

Galaxy S26, S26 Plus and S26 Ultra TPU cases

Galaxy S26, S26 Plus and S26 Ultra cases. Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. To…

Downloads
2,234
Likes
99
Rating
4.58
P
PrintablesAgentvt01

Beyblade x cases

Various sizes of cases to hold beyblade x beys

Downloads
1,972
Likes
179
Rating
3.67
P
PrintablesGeorge F

Small-Battery Cases (Parametric)

Small-Battery Storage Cases Small watch-, calculator-, and other instrument batteries can be stored in these racks with their fitted cases. Through the OpenSCAD source file you may specify any size of small battery by filling in the…

Downloads
1,855
Likes
1,169
Rating
4.57
P
PrintablesAlley Cat

Heltec LoRa 32 V4/V3 Slim Cases

Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…

Downloads
1,647
Likes
162
Rating
5
P
Printables0x90

MTG Card Divider for Storage Cases and Deck Boxes

Needed a way to start better organizing my MTG collection and separating decks within boxes. These dividers make it super simple to just segment things, and visually (clearly) see what chunk of cards is “below” the divider (once you apply…

Downloads
1,347
Likes
270
Rating
4.83
P
PrintablesAlley Cat

Heltec T114 Slim Cases

Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…

Downloads
1,306
Likes
162
Rating
5
P
Printablespancakesyrup_

TTGO T-Display Cases

Summary This enclosure is designed for the TTGO T-Display ESP32 boards with a 1.14" LCD screen. It ensures that the USB-C cable can be yank out without pulling out the board, press the buttons without fear of breakage. Includes space for…

Downloads
1,031
Likes
64
Rating
5
P
PrintablesNorkkon

Costco Battery Cases 9v, AAA, AA, CR123, 18650

Well, The dividers are overkill at 1.2mm, but it works really well sized for either a 0.4 or a 0.6 nozzle. I use the 0.6 nozzle. The previous version with grid/square like separators won't bind with the case well enough. The waves are the…

Downloads
945
Likes
100
Rating
5
P
PrintablesChromatic

Cases for disposable lighters

Five case designs to fit typical (11.75 x 23.75 x 67mm) disposable lighters. Model 1 - plain Model 2 - small raised dots Model 3 - small round holes Model 4 - large round holes Model 5 - large raised dots Printed in PLA. The models with…

Downloads
851
Likes
329
Rating
0
P
PrintablesMartin

GoPro Hero 10 Protective Cases

Three versions of a GoPro Hero 10 protective case. Version 1: With front screen cutout Version 2: With partial front screen cutout to show only the relevant top and bottom bar recording information Version 3: Without front screen cutout…

Downloads
826
Likes
77
Rating
5
P
PrintablesEstep

Battery Cases for 4 AA or 4 AAA Batteries. With screw-caps.

If you are looking for bigger cases for 12 Batteries, you can find them here: https://www.printables.com/de/model/382489-battery-cases-for-12-aa-or-12-aaa-batteries-with-s Update 18.4.21: Added STLs for the lids without the AA/AAA Labels.…

Downloads
821
Likes
83
Rating
4.83
P
PrintablesJ03

Flipper Zero hard cases

Flipper Zero hard cases 2 versions of a hard case for the Flipper Zero. Flipper_Hard_Case_open_top.stl is a open top face cover to access the screen and buttons. Flipper_Hard_Case_top.stl is a full case version Required hardware: 2x M2.5…

Downloads
775
Likes
95
Rating
5
P
PrintablesChrisE

Lens Cases for Canon EF-M / Canister Set

Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…

Downloads
771
Likes
198
Rating
5
P
PrintablesEnderman Prints

Rugged Box Eyeglass Cases (Sizes NORMAL and LARGE)

Rugged Box Eyeglass Case Remix from Fully parameterized rugged tool box by Whity. Fully parametric Fusion 360 model can easily be customized for special needs. I wanted a rugged style case for my goggles and made it 40mm x 35mm 145mm,…

Downloads
726
Likes
174
Rating
5
P
PrintablesSquirrelTaint

Pokémon Card Stand for PSA and OneTouch Cases

Added Card Stand V2 where I cleaned up the front.

Downloads
725
Likes
67
Rating
5
P
PrintablesJerrari

MODULITH 185 Cases - All

THE GEN2 185 COLLECTION The complete set of GEN2 185 cases · the Standard collection in the GEN2 QuickLock Modular System . At about 171 mm inside, the 185 is the versatile all-rounder for everyday gear. This model includes all 18 cases:…

Downloads
716
Likes
31
Rating
4.8
P
PrintablesDotNetWorker

Front bezel compatible with DELL 3060 5060 7060 micro cases - add splash of colour to your PC

Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…

Downloads
707
Likes
107
Rating
5
P
PrintablesBryce

Game Boy Inserts for Switch Cases

Store your Game Boy, GB Colour, or GB Advance games inside your Nintendo Switch game cases. Includes printable PSD template for game art covers.

Downloads
705
Likes
97
Rating
5
P
PrintablesZack Freedman

Hotswap Disk Sled for Crappy Rosewill RSV Series Server Cases

Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how…

Downloads
699
Likes
339
Rating
5
P
PrintablesJerrari

MODULITH 240 Cases - All

THE GEN2 240 COLLECTION The complete set of GEN2 240 cases · the Deep collection in the GEN2 QuickLock Modular System . At about 226 mm inside, the 240 swallows power tools, spray cans, boxed sets, and tall bottles. This model includes…

Downloads
657
Likes
46
Rating
4.88
P
PrintablesJamburgg

Phone Stand for Phones with Cases (allows for charging cable)

I'm sure you are all familiar with this design by now, it's a remix of an existing model with an enlarged holder to accommodate for thicker phones, even with cases. Includes a cutout to allow a phone to be held whilst charging, making it…

Downloads
650
Likes
34
Rating
4.6
P
Printablesmeet

Wear It Well Condom Cases

Keep your protection organized and safe! Two versions of storage box for the standard "Durex" size condom packaging. Each condom has a dedicated compartment in which it fits perfectly and is always easily accessible and completely safe.…

Downloads
634
Likes
88
Rating
4.75
P
PrintablesDunn Chuck

Fender emblem for guitar amp and cases

Printable 3d emblem for Fender amps, speakers and guitar cases etc. I made a couple of variations with/without base and holes. If you want to print exactly what I printed and uploaded on the picture use the 2 layer version and make a…

Downloads
619
Likes
76
Rating
5
P
PrintablesGringo

18650 Battery Cases

Some battery cases for 18650 batteries. The lids have a good snug fit, depends on filament used, layer hight and the accuracy of your 3D printer. Personally, I didn't have to adjust anything :) Feel free to adjust the dimensions in the…

Downloads
615
Likes
77
Rating
4.85
P
Printablessmartroad

Raspberry Pi 3/4 Cases - ICE Tower Low Profile

Edit 6/8/2022 Updated to include a case and left side for the Pi3 (probably 2B as well but I don't have one to hand to check). Just print the Pi3 parts as well as the “Tower Right” stl. I have also updated all of the 3MF files for both…

Downloads
604
Likes
86
Rating
5
P
PrintablesAndreas Mass

Gridfinity 1x1/1x2 bin 2x divider Add-on for cases

2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…

Downloads
600
Likes
199
Rating
4.88
P
PrintablesVictronix

iPhone 15, 16 and 17 series 2K cases

Flexible TPU iPhone Case with Integrated Camera Protector Protect your iPhone in style with this custom 3D printable case designed for the iPhone 15, 16, and 17 series . The main body of the case is optimized for TPU 95A , offering a…

Downloads
595
Likes
43
Rating
4.33
P
PrintablesCarter

Pi Zero 2 Cases

New Case! June 2024. Print only the case you want… GPIO or NON-GPIO Features Compression fit (no screws needed) MicroSD card access and Camera access Finger Nail assembly/disassembly NO SCREWS! Instructions 1 Zero board press into Base…

Downloads
585
Likes
62
Rating
4.79
P
PrintablesDzzD

Additional desiccant cases for Bambu Lab X1 AMS (for unpacked silica gel) with humidity sensor support.

Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of this one , I added caps & humidity sensor support. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less…

Downloads
580
Likes
47
Rating
4.67
P
Printablesstevenmarx

Fairphone 4 Cases, Bumper & Card Wallet

The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…

Downloads
561
Likes
58
Rating
4.67
P
PrintablesTom Yum

3D printing friendly SlimeVR Cases for the SlimeVR DIY Kit (UNTESTED)

After working on the Official SlimeVR case design, I realized that they were not easy to print on an FDM 3D printer. I've decided to modify the design and publish it here for people to build their own SlimeVR trackers using the DIY Kit !…

Downloads
551
Likes
15
Rating
5
P
PrintablesTache

Festool Domino Cutter Rugged Cases

These are cute little boxes for the Festool Domino DF500 and DF700 cutters and wrenches. They are remixed from the awesome Rugged Box (Parametric) designed by Whity . Update 2024.10.30: Added 3 mm and 4 mm wrench slot options for the…

Downloads
548
Likes
131
Rating
5
P
Printablesfns720

18650 battery cases

Minimalistic protective cases for 18650 batteries. Print instructions 2x case needs support.

Downloads
542
Likes
73
Rating
4.5
P
Printablesfuchsr

The Crew: Mission Deep Sea Organizer/Insert plus submarine and token cases

An insert in the same style as my organizer for The Crew: The Quest for Planet Nine . Update 1-12-2023 : New version of submarine. Now prints as one piece, no supports needed! Features include: Holds sleeved or unsleeved cards. Token…

Downloads
527
Likes
70
Rating
4.86
P
PrintablesThesBer

Samsung Galaxy S24 different cases - New v3.6 - Smartphone

This is my newest Samsung Galaxy S24 cases - complete redesign with two different pattern Voronoi and OrganicLoop . No support is required in the slicer settings :-) The green parts in the picture are the supports for easy printing and…

Downloads
526
Likes
28
Rating
5
P
PrintablesLowRob

iPad Pro Stand for thick cases

This is an iPad Pro 12.9" stand for thicker cases (e.g. EVA-Foam) Das ist ein iPad Pro 12.9" Ständer für dickere Hüllen (z.B. Schaumstoff) Print instructions Unassociated tags: hülle, ständer Category: Tablet Print Settings Printer Brand:…

Downloads
510
Likes
22
Rating
5
P
PrintablesRCNet

Tall Feet for Jonsbo D31/D41 Series of Computer Cases.

This is a taller version of the foot from the Jonsbo D31/D41 series of ATX computer cases. The purpose is to increase the gap under the case and improve airflow into the lower intake fans. The gap with the tall feet is now approximately…

Downloads
509
Likes
40
Rating
0
P
PrintablesEstep

Battery Cases for 12 AA or 12 AAA Batteries. With Screw-Caps.

Simple Cases for AA and AAA batteries. If you are looking for smaller cases for only 4 Batteries, you can find them here: https://www.printables.com/de/model/382491-battery-cases-for-4-aa-or-4-aaa-batteries-with-scr Print Settings Rafts:…

Downloads
507
Likes
59
Rating
5
P
PrintablesAdam L

Raspberry Pi 5 Cases With Multicolor Logo

This is a remix of my simple ventilation case that adds the option for a multi-colored pi logo embedded in the case. This is great for people who want to do multi-color printing. For BambuSlicer/OrcaSlicer users, I provide a pre-colored…

Downloads
498
Likes
55
Rating
5
P
PrintablesNirvash

Hard Drive Cage Kit Type B for Fractal Design cases

NOTE: ==================== If your tray is bigger than 14mm tall and 110mm wide you might have fitting problems. I recommend printing a test first (or pause and park the toolhead) with like 1cm of the cage, and try the fitment I've…

Downloads
484
Likes
79
Rating
0
P
PrintablesTillin9

Parametric Gwent Deck Card Cases

With the Witcher Netflix series, I recently got back into the games and rediscovered Gwent. I wanted to play with friends (as opposed to the AI) and didn't like the changes made to the standalone game. While CD Projekt Red did release…

Downloads
477
Likes
62
Rating
5
P
Printablesrbel

Typeractive Cases

Cases for the Typeractive versions of the Corne, Corne 5 column, and the Lily58. Straight from typeractive.xyz. I just exported it using Blender. All rights to Typeractive.

Downloads
471
Likes
36
Rating
3
P
PrintablesSR-G

Small-Battery Cases (Parametric) v3

This is an OpenSCAD file allowing to create STL for battery cases (with or without a sheath) in a parametric way, by selecting : the number of rows and columns you want for cells (1x10 = 10 cells, 2x15 = 30 cells, …) the exact type of…

Downloads
467
Likes
73
Rating
5
P
PrintablesAdam L

Basic Raspberry Pi 5 Ventilation and Blank Cases

Change log: 10/18/2023 : Corrected a mistake I made in a vent extrusion cutting too far. Updated to v11. Please re-download the fixed versions if you had the previous one. Sorry about the mistake! A set of straightforward everyday cases…

Downloads
467
Likes
24
Rating
4.5
P
Printablesff

Gameboy Apple Watch Charging Stand with Cases

Apple Watch 6 44 mm in the picture.

Downloads
461
Likes
88
Rating
5
P
PrintablesVictronix

iPhone 18 Pro & Pro Max TPU Cases

iPhone 18 Pro & Pro Max TPU Cases Simple, flexible TPU phone cases designed for the iPhone 18 Pro and iPhone 18 Pro Max. The cases are designed for 3D printing in flexible TPU, providing a lightweight layer of protection while keeping the…

Downloads
459
Likes
14
Rating
0
P
PrintablesMartin

Fairphone 5 cases

Case, case with card cut out, bumper I have made 3D files of the phone both with cutouts and without to use for other projects.

Downloads
458
Likes
30
Rating
4
P
PrintablesBlueShell3D

Game Boy Cartridge Storage Tray for OEM Cases (3 Sizes)

Storage trays for original Game Boy and Game Boy Color games in original Nintendo cases. Includes an indentation and runners to accommodate the OEM case tab. Print the big ones with a brim if you know whats good for you. Standard : Holds…

Downloads
422
Likes
62
Rating
5
P
PrintablesRobert Schiele

Minimalistic Phone Stand for Quad Lock Cases

No supports needed. I printed with PETG on a 0.4mm nozzle with 0.2mm layer height and 20% infill but due to the design, those parameters are likely not particularly relevant.

Downloads
398
Likes
39
Rating
4.8
P
PrintablesMartin

GoPro Hero 9 Protective Cases

Three versions of a GoPro Hero 9 protective case. Version 1: With front screen cutout Version 2: With partial front screen cutout to show only the relevant top and bottom bar recording information Version 3: Without front screen cutout…

Downloads
397
Likes
28
Rating
5
P
PrintablesLMG

Mega Samsung Galaxy Z Fold 7 Pack (with more cases!)

Everything has been tested on my Ender 3 V2 running Klipper except for anything in the Beta Builds Please read the whole description: V2 V2 includes a slightly more cleaned up design to really hug the phone properly and now introduces…

Downloads
390
Likes
47
Rating
1
P
PrintablesRotkiv

Oneplus 15 Cases

Protective case for the Oneplus 15. One with a design of a Michelin tyre, the other one plain for you to emboss yourself in your slicer of choice. The dimensions are 1:1 of the Oneplus 15 since I used TPU to have a tight fit. This means…

Downloads
388
Likes
27
Rating
5
P
PrintablesZahg

RPi4 cases

Imported from Thingiverse. A couple of different cases for the Raspberry Pi 4. Low and tall version for Ø30 and Ø40 mm Noctua fans. Not sure about other brands, but should work for a couple of other ones. One version made to fit the 30x30…

Downloads
376
Likes
41
Rating
5
P
PrintablesAlex Krush

AirTag Keychain Cases

AirTag Keychain Cases I made this model using the AirTag Model by Will for sizing. It was terrific! I took inspiration from the AirTag Keychain case from bunji1818, but did not use it for anything in design A friend wanted some AirTag…

Downloads
375
Likes
62
Rating
5
P
PrintablesJsmaz3

Insta360 X3 Cases

So i made these cases to fit an insta360 x3 camera with the lens guards, it has a tpu insert that holds the camera in place and should be soft enough to not damage the lens. it also should fit the camera without the guards and without the…

Downloads
373
Likes
87
Rating
4.75
P
PrintablesGorroth 1007

Apple TV Remote various Cases / verschiedene Cases für Apple TV Fernbedienung (2022 Model)

Deutsch: Ich habe ein Case für die Apple TV Fernbedienung (Generation 2022) für den Druck aus TPU entworfen. Druckanweisungen: Druck in TPU Oberseite sollte beim Druck nach unten zeigen Es werden Supports benötigt siehe hierzu auch die…

Downloads
356
Likes
26
Rating
5
P
PrintablesVictronix

iPhone 15 and 15 Pro cases

iPhone 15 and 15 Pro cases to be printed in TPU of your choice. If you like my work, consider buying me a coffee https://ko-fi.com/elektronchika

Downloads
347
Likes
22
Rating
5
P
Printablesnzalog

NCASE M1 and Lian Li PC-Q33 side panel clips (may fit other lian li cases)

These are the clips that hold the side panels in on the NCASE M1 and Lian Li PC-Q33 (and maybe other) cases. I've tried in ABS and it works well, so far it's went through a lot of cycles of me taking the panels on and off. Not sure if PLA…

Downloads
347
Likes
20
Rating
4.8
P
Printablesmystery man
Downloads
344
Likes
11
Rating
3
P
Printableszeus

Hexagonal logo-tiles for server-racks, fridges and pc-cases

The included STLs are 125mm in diameter (edge-to-edge), a material thickness (not overall thickness) of 3mm, and have a plain backside and feature around ~50 more or less popular logos of software, programming languages and hardware one…

Downloads
342
Likes
108
Rating
5
P
PrintablesJay_L

ESP32 DevKitC Cases v4

remix of https://www.thingiverse.com/thing:2071188 2 Case options for ESP32 Devkit C (v4). One has the pins enclosed and the other with the pins exposed.

Downloads
335
Likes
29
Rating
3
P
PrintablesSirHair

Pre-fabs for fuchsr's "Print-in-Place, Customizable Cases for Button-type Batteries" - 25+ sizes

Researched common sizes, labelled and generated multiple boxes from fuchsr's Print-in-Place, Customizable Cases for Button-type Batteries using Queued's SCAD with a broader diameter range. (Wiki: List of battery sizes , Button_cell ).…

Downloads
335
Likes
75
Rating
5
P
Printablesmuddymaker

Battery Travel Cases AA/AAA

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Battery Travel Cases AA/AAA. Holds either 2 AA's or 2 AAA's.…

Downloads
334
Likes
46
Rating
5
P
PrintablesDzzD

Additional desiccant cases for Bambu Lab X1 AMS (for unpacked silica gel)

Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less preferably No support Fill with silica gel, preferably with color indicator. Tips :…

Downloads
329
Likes
30
Rating
4.75
P
PrintablesAdafruit

Retro Cases for PyPortal

These cases are designed for the new line of PyPortals. The PyPortal original, PyPortal Titano and PyPortal Pynt. Print instructions It’s like a mini desktop PC that you can have on your desk and display all sorts of data. The ports are…

Downloads
327
Likes
127
Rating
5
P

Tokai Lighter Sleeves & Cases / Tokai Çakmak Kılıfları (10 Designs)

Basically a fun little project me and my audience did while livestreaming. These cases fit into the blocky tokai lighters and they give you the ability to personalize your lighters. WARNING: NO COLORS BECAUSE I HAVE A MAJOR SKILL ISSUE.…

Downloads
326
Likes
36
Rating
0
P
PrintablesCoat

Agon Light2 Cases

A nice case in different variants for your AGON Light2 (Olimex). The base of all the cases is the same. Same cutouts which should fit all connections in different sizes. Also with a protection against accidentally pressing the (long)…

Downloads
325
Likes
20
Rating
5
P
PrintablesCarter

Flipable Bracket for Prusa I3 and Pi Cases

Flipable. Cases friction fit and can face either direction. Print instructions prints in ABS, .2mm layers no supports

Downloads
324
Likes
58
Rating
4.81
P
PrintablesSebastian

Protective Cases for AirTag Accessories

Pendant case to attach an AirTag accessory to a bag or backpack. The rounded corner case can be used to put an AirTag accessory into a bag or suitcase and still protect it from scratches. Print out the lower and upper part, insert the…

Downloads
321
Likes
31
Rating
5
P
PrintablesOfTheSea

Vase mode battery cases – AA, AAA, and CR123

-– == Update 06/37/2023 == – You may need to adjust x-y scale by +-/1-2% to account for the variation of battery sizes. I have printed 30+ holders and only had to do this one or two times. –-== Original image ==-- -- == Vase-mode battery…

Downloads
318
Likes
47
Rating
5
P
PrintablesSimon O'Brien

Camera Lens Filter Cases - 62mm & 40.5mm

Two screw top cases for lens filters. For 40.5mm and 62mm filters. Category: Camera

Downloads
314
Likes
39
Rating
4.86
P
PrintablesJerrari

MODULITH 270 Cases - All

THE GEN2 270 COLLECTION The complete set of GEN2 270 cases · the Large collection in the GEN2 QuickLock Modular System. At about 256 mm inside, the 270 swallows long tools, cordless kits, and big spools. This model includes all 18 cases:…

Downloads
312
Likes
23
Rating
5
P
PrintablesKodachrome

Under case fan duct for Lian Li O11 plus most other cases with bottom mount 120mm fans

Don't want to suck hot carpeted air, dust and dirt into your expensive GPU and case? Want cooler temps and higher airflow? Use these ducts to pull air in from beside the case not directly and immediately beneath it. Position them pointing…

Downloads
306
Likes
58
Rating
0
P
PrintablesCitruspers

1xSSD to 6xSSD bracket (for Node 804 and other PC cases)

Converts a 1xSSD (or any 2.5") mount into a 6xSSD bracket, with multiple mounting options. If your case has 4 screw holes used to mount an SSD (flat orientation), this bracket should work for you. Multiple mounting options: Flat…

Downloads
302
Likes
91
Rating
5
P
PrintablesJerrod H

3 and 7-Day Pill Cases with Sliding Lid and Magnets

These models are inspired by the much, much nicer cases made from machined aluminum by Ikigai cases , specifically their Weekly AM/PM Case 2.0 and Mission Pill Case . If you like the design and feel of these 3d-printed surrogates, I…

Downloads
300
Likes
41
Rating
5
P
Printablespcwzrd13

CD Rack for Thick Japanese Jewel Cases (Dreamcast)

If you like the design, please consider tipping on Ko-fi . Thank you! :-)

Downloads
287
Likes
35
Rating
0
P
PrintablesPlanmarks

Official KIISU V4B Cases

Official KIISU V4B Development Board Case(s) Includes: Regular Case (with acrylic shield) Slim Case Antenna Case Extra Accessory Piece Variations: With GPIO hole With space for external antenna Slim or Regular buttons Hardware…

Downloads
284
Likes
22
Rating
0
P
PrintablesGorroth 1007

iPhone 13 MagSafe compatible TPU cases (with optional lanyard holes)

Deutsch: Ich habe zwei Hüllen für das normale iPhone 13 entworfen, die MagSafe kompatibel sind. Beachte allerdings, dass die Hüllen 3mm dick sind und die Aussparung für MagSafe auf der Rückseite einen Durchmesser von 65mm hat. Entworfen…

Downloads
276
Likes
18
Rating
4.5
P
PrintablesVictronix

Pixel 9, 9 Pro and 9 XL Pro cases

Google Pixel 9 and 9 XL cases, to be printed in TPU of your choice. These models are based on official 3d models from Google and have 0.2 mm clearance around the phones. If you like my work, consider buying me a coffee…

Downloads
273
Likes
19
Rating
0
P
Printablesfuchsr

The Crew: The Quest for Planet Nine -- Token Cases

These are cases to protect the cardboard tokens in The Crew: The Quest for Planet Nine. They were designed using my custom cases OpenSCAD Customizer script: https://www.thingiverse.com/thing:4160162 . I usually print them in…

Downloads
262
Likes
29
Rating
5
P
PrintablesDM4DS

Balun Cases - 1:9 - 1:1 - FT240 - etc.

Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…

Downloads
259
Likes
33
Rating
0
P
PrintablesRatlet

Standardised 1.25" Telescope Astronomy Eyepiece Filter Cases

I was a bit annoyed with trying to fit my filters into my eyepieces case. Every filter seemed to come in a different box which meant they could either float around loose or I’d need to make multiple different sized holes in the foam. I…

Downloads
255
Likes
55
Rating
5
P
PrintablesJerrari

MODULITH 165 Cases - All

THE GEN2 165 COLLECTION The complete set of GEN2 165 cases · the Mini Edition collection in the GEN2 QuickLock Modular System . At about 151 mm inside, the 165 is sized for sockets, calipers, small tools, and hobby bits. This model…

Downloads
253
Likes
20
Rating
5
P
PrintablesAespin01

Tripod Shoe compatible with QuadLock phone cases

This adapter is handy for quickly securing your phone to a tripod using a QuadLock case. There are two versions, long and short. The long version is required for portrait filming and larger phones. Both models print flat and require…

Downloads
252
Likes
35
Rating
5
P
PrintablesJerrari

MODULITH 115 Cases - All

THE GEN2 115 COLLECTION The complete set of GEN2 115 cases · the medium-depth collection in the GEN2 QuickLock Modular System . At about 101 mm inside, the 115 is a versatile everyday size for pens, cables, tape, small parts, and tins.…

Downloads
248
Likes
22
Rating
5