6,053 models
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Teniendo como base otros modelos que utilizan engranajes, diseñe este modelo desde cero, NO es un remix. Aplique lo aprendido para modelar con engranajes y quise compartirlo. Se que es parecido a otros modelos; espero no molestar a alguna…
Print approx. €1.71–€2.10 excl. taxPreliminary estimate for one variant
Storage boxes for coin cell / button batteries Also included customizable Fusion360 parametric model (battery size & quantity) Printed on modified Ender 3 at 0.2mm height
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Because I've been playing with the idea of using my phone as a navigation device while riding my motorcycle, I designed a mount. The holder is mounted directly on the handlebar below the speedometer and is thus well in the field of view.…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
~ Design collaboration with Azurefilm ~ A biological plant pot design for all the nature science lovers out there! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Celtic knot inspired guitar picks. I play with them regularly. Also makes a good bed level z-adjustment test.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
One piece Most dangerous snailphone ! Buster call is coming
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
This minimalist 3D printed jewelry stand is designed to organize and display necklaces, bracelets and rings while keeping your dresser or vanity clean and elegant. The stand features two horizontal bars at different heights , making it…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
I needed a reusable way to attach a coin-cell battery to a single 3v LED as well as something I could hand to just about anyone without any explanation and they could figure things out just by looking at it. Just enough of the battery…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This download contains all 3D printable components for our SingleCell enclosure. Please click here if you ordered the SingleCell MKII and need the latest files. Currently compatible with the Prusa MK3S with black and silver PSU types…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
In the files you'll find a 16-thread and a 8-thread version of it. 80 mm in diameter 2,5 mm thick With haptic directional arrows, letters and braille. You can print it directly without supports. In the files you'll find also find the…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Design description This is a gridfinity holder for 10 LR44 Coin cell batteries. Block area is 1x1, and has a height of ⅓, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Messi Barcelona Penalty Kick
Print approx. €5.17–€6.31 excl. taxPreliminary estimate for one variant
UPDATE 04.08.2023: Added print file for PLA, 0.3 mm layer. UPDATE 31.07.2023: Added print file for PETG, 0.3 mm layer. Print time decreased to about 5 hours. UPDATE 25.07.2023: New model printed and seems all is fine, check photos. On…
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for PETGSource material: PET
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print cell phone stand for portrait and landscape viewing with added biohazard so no one else touches your phone! Sits low to table and sound is amplified better than laying flat on the table. Print instructions 0.20mm Quality…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Please click if you appreciate my work :) Futuristic JDM flair from the early 2000s. This 3D printable wall-mounted model of the Toyota Celica Gen 7 (1999–2006) captures the sleek, aerodynamic silhouette of the last Celica ever made. The…
Print approx. €11.50–€14.05 excl. taxPreliminary estimate for one variant
🟦🟥🟦🟥🟦🟥🟦🟥🟦 ⚽ Visca Barça! 🏟 🟨🟥🟨🟥🟨🟥🟨🟥🟨 Nike is the current partner of FC Barcelona for kits and apparel, creating some of the most iconic jerseys for decades now! Here are some of the most memorable ones since 2004, when a golden age of FC…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Tablet weaving (youtube.com) TABLET WEAVING (weaversguildnorthshore.org) Jak tkát na karetkách? (youtube.com)
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
“Gotcha” Apollo Justice's cherished and consistently worn bracelet. It tightens on his wrist when when a witness displays nervous habits, however this one is just a prop for cosplay. Fits a wrist 3" (or 76mm) in diameter. The two sides…
Print approx. €5.30–€6.48 excl. taxPreliminary estimate for one variant
ENGLISH I've always had a passion for Paracord and some time ago I met BlackSquirrel from whom I buy the materials to make my creations, they have a great assortment and well done guides and tutorials on how to make bracelets and more . I…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
This dual battery holder fits perfect with longer 18650 / 18700 cells. I made some changes from the Thingiverse version (thanks to Shadow8286 )because the original could not hold my 70mm long cells not very good and it was hard to…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Hole measures 73mm in diameter and 42mm deep, with the cuff and larger gears being flexible. The smaller pinion gears and their stays can be added after fitting the cuff and are rigid. The little "spikes" have an M6 bolt pattern and can…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
I created this Tri-Bahtinov Mask for my Celestron EdgeHD using the following site https://satakagi.github.io/tribahtinovWebApps/Tri-Bahtinov_symmetric.html, created by Satoru Takagi. Focal length: 2000mm Outer diameter: 209mm (so it fits…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
This is a very simple cell phone stand for phones with cases. Every phone holder I found on Prusa Prints seemed to be designed for phones without a case, and my phone just kept falling off. This is my very FIRST from scratch design, so it…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
A simple modeli showing wave cancelation. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
Print approx. €2.26–€2.77 excl. taxPreliminary estimate for one variant
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
Con la idea de utilizar una botella plástica como soporte, se diseñó la tapa de medidas estándar para colocar un celular. Un producto práctico, resistente y fácil de llevar.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Friendship Bracelet Wheel 7-colors Here is a tutorial to make the bracelet (not mine video): Feel free to like, download and follow. If you want check my other models. Happy Modeling and Printing!!!
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This box holds 12x LR44, 10x CR2025, 10x CR2032 The design is made to print without support. The Box closes with a slider and a tacky SNAP! at the end. Please use the “Split” function in the right click menu of the slicer to separate the…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
The cuff bracelet was intended to be printed with Matterhackers Quantum iridescent filament, which displays different colors on different sides of the print. That allows the rotating beads different colors in different orientations. It…
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a touch of timeless elegance with the Celtic Knot Coaster! With a diameter of 100 mm and a thickness of 4 mm, this intricately designed coaster…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
model BMW e46 Touring facelift keychain
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
3d map of the Sagrada Familia and its environs In a 3d map with the reliefs of the city and the surroundings of the monument (it is a similar representation by copyright).
Print approx. €11.00–€13.45 excl. taxPreliminary estimate for one variant
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
I needed a model for an assignment. This Worked. I thought I would post it on here in case if anybody needed a cell model. I printed everything on 5% infill on an Ender 3 Max. The base and the main plant cell need support, but be careful…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Vase mode pen caddy with 25 deep chambers for sharpies & paint brushes. Created for personal use but you can have one.
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
This is a model I made with the idea of making a whale breaching. I went with a bracelet holder and ring tray, since prints gotta be practical or it's rough to get it out there. Prints well in most materials, no supports needed! The file…
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for one variant
I needed a Rituals fragrance dispenser holder for my Mercedes Benz V-Class (facelift, model year 2025) with the central ventilation slots. My holder is used instead of the original holder and is attached to the plastic bars on the back of…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Holds cell phone while charging, securely in CD slot. Tested in Ford cars and Trucks. Print in PETG or ABS - as the summer sun will melt PLA. Default settings but turn on thick bridges. Pictures show .3 layer height draft mode print. Note…
Print approx. €2.66–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
This Heart Bracelet makes the perfect home-made gift for your special Valentine! Choose from one of the 9 provided lengths and print the bracelet in two colors through a simple filament color change during printing. The clasp attaches and…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
little bit of hot glue is nessesary for good hold in tray , ideal for making a battery from cells , its made for my mini 10w solar system in garage if printed please add a make thanks
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
A fully customizable button cell holder block. The default configuration fits at least 6 cells of the same type, with support for 5 common CR-types and 8 AG-/LR-types. The top can be sloped (the default is 7°).
Print approx. €8.04–€9.83 excl. taxPreliminary estimate for one variant
OpenFaceMask is an 3D printable open-source protective mask, that only requires parts which are available in every common household. No gluing, no sewing required! The frame can be pressed together and minimizes print time when using SLS…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Krytky pouze hladké - přilepeny kvalitní oboustrankou - tisteno na skle Covers - use with doublesided tape-printed on glass
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Print with no support
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Reproduction fidèle de l'emblème du FC Barcelone, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 /…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
This little reprint lets you hand grip and ratchet Xcelite nut driver bits. Nice and firm grip on the tool shaft so it won't drop out, but still easily pressed in and out. To reverse the ratchet, turn the tool over.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Simple battery holder for storage of LR44 (AKA SR44, AG13, 357, LR1154) coin cell batteries, commonly used in digital calipers and other small electronics. One of a series of battery holders I've created and shared here on Printables:…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
the base model is only one ring. you can print more of them and stack them on top of each other. I used Prusament black Pla on temeperatures 215°C end and 60°C bed.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
That is my first prototype of a kinetic sculpture/mobile… with a 90mm Earth, 70mm Moon and either a 70mm Venus, Mars or Pluto. That results in a scale of 1 : 141.733.333,3 cm for the Earth 1 : 49.631.428,6 cm for the Moon (of Earth) 1 :…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Coin with a celtic knot engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The Censer of Celestial Auspice Origins in the Ming Dynasty (1368–1644) The "Censer of Celestial Auspice" (天祥爐, Tiānxiáng Lú ), is believed to be a rare example of a bronze ritual censer commissioned during the opulent mid- Ming Dynasty .…
Print approx. €14.21–€17.37 excl. taxPreliminary estimate for one variant
Here is a special "Valentine's Day" version of the bracelet in interchangeable colors. Print tabs of different colors and change according to your desires and clothes!!! Printed in less than two hours. Little gift of the day for your…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Another model of my jewelry box - now for bracelets (especially circular bracelets) and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky).…
Print approx. €5.26–€6.42 excl. taxPreliminary estimate for one variant
Designed to be mount-taped onto my car dash so I can drop my Jelly 2 cellphone in and go. If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for PETGSource material: PET
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Ladies Penn State singlet ring and bracelet set. Ring is a size 6. Bracelet is approx. 2" at the widest point. The prints in the cover photo were made on a poly jet printer.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Simple and prints quickly (~10 minutes on my printer). This keychain is based off of a picture I took of my rally style GT86 so it is lifted slightly and dimensions may be off by a bit. About 2 3/4" x 1" x 1/8" for the original model…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Las medidas de la foto están en mm por lo que realmente son unos 6'5 cm de ancho y 3'7 cm de alto aprox.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Hello, I have for you a Booth, a cell for an RC car, a cart 1:10, 1:12 (130x130x130mm ). It is detachable and you can choose which parts to put where, or which ones to print. Suitable for a cart for an RC car. Or as a booth 1:12, 1:10. I…
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
You can apply cork to the underside of the coaster to help keep it from slipping on the table.
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Animals celebrate New Year: ferret, teddy bear, snake (10 cm), toppers (two colours)
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
I have printed two of them, one that fits in my mobile toolbox, the other in the drawer of my workbench. That way, those guides are always where I expect them to be, I know exactly how to position them on my work piece even without…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for PETGSource material: PET
Tortoise celebrates New Year
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Here is an easy but useful print. If you build lithium battery packs this is handy. Created to use with my 18650 power bank build. Prints fairly fast also.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Designed for 0.15 mm layer height with 15 layers. The bgcode-file and the 3mf-file have included filament change stops at layers 3, 8, and 14. Thus you can use 4 different colours.
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
Prevent damage to your flow cell when it's not in the detector
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
If You need to replace an 14,4V SUB-C cell package, this spacer may help. 14,4V means 12 cells. Each NiCd with 1,2V in normal use. BUT the first mAh, the cell provides 1,5V. (NimH is also close to 1,55V) So 12cells*1,5V=18V … The tool…
Print approx. €5.07–€6.19 excl. taxPreliminary estimate for one variant
I printed this in PLA and it worked well… fits children and adults… I used this model to close it (included in the Slicer file): https://www.printables.com/model/555593-festival-wristband-security-closure.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
If you own an excellent screw bit set and rachet for cramped space and if you are irritated with original useless PVC pouch, as I do, than here is a solution. Why the original pouch is useles? Because it does not keep content in place.…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
This is Coin Box for Tesla model 3 after facelift in center panel. It contains larger grooves for bigger coins and smaller one too. It prevents them to slide when driving. Container next to it has rounded bottom so it is easier to take…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for one variant
A bracelet with "Pumping Station:One" debossed on it. Created with FreeCAD, using the Curves workbench. The FreeCAD files contain the dimensional values in a spreadsheet, including alternate sizes: extra-large and small.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
This bracelet achieves flexibility by using two opposing cones to achieve flexibility. The clearance between parts is 0.38 mm. The sunflower attached to the bracelet is provided in a separate Printables.com file. The bracelet is 7.24 mm…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
https://www.smithsonianmag.com/smart-news/mathematicians-discover-a-new-class-of-shape-the-soft-cell-180985124/ Model has some fillets applied, otherwise the edges are too sharp to print.
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for PETGSource material: PET
Yume Hawk, parte interna del acelerador de gatillo, el imán para que funcione el acelerómetro va pegado a la pieza
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Various sizes of heart bracelets. If needed you can print the smallest version multiple times to make a long chain. The 7 Link Version is likely the best for adults and the 5 link version is great for kids around ages 5-9. Print Tips:…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
11 SD card holder that clips onto the SingleCell MK2 frame
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Made this to make cell removing easier on my fingers and not use a metal tool and make sparks! Especially when they use rubber spacers made for the old 20r cells and put 25r cells in it. A bit tight!!
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
An insert to allow the clamps on top of the Miltenyi Prodigy to accept syringes. Print can stay in place, and syringes can then be clipped in and out of the system as needed. I printed in PLA at 0.2mm height with a 0.4mm nozzle. No…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Clip so you can user wire loom instead of the flat clips Print Instructions 3 perimeters 15% Infill Cubic
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I purchased a CLLENA AC to DC Converter (20A 250W 110V~240V to 12V) with a Car Cigarette Lighter Socket to operate my IGLOO ICELESS cooler when not in the automobile. Designed this organizer to hold the power supply and cords on the…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for PETGSource material: PET
model is for czech event zlatá včela it is a trophy for winners this item will be used for the first time in April 2027
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Een speelgoedje van uit de oude tijd maar dan in PLA plastiek. Het best gebruik je een nylon touw dat kan je aan de voorkant warm maken en een puntje aan duwen. Zo kan je het touwtje gemakkelijker in het gaatje steken. An old-fashioned…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Grâce à ses encoche la ficelle reste toujours bien en place sur la bobine
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
pour tirer un jouet sur roulettes, une poigné adaptée aux enfants
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
A celtic themed coaster I made as a gift this year, inspired by several other coaster designs I found. They are 90mm in diameter and there is a fitting holder included here. Both are optimized for printing in two colors and with a 0.6mm…
