Search results: cetus

Sort order

61 models

P
PrintablesJohn doe

Cetus Pro Frame and Canopy replacement

I crashed my Betafpv Cetus pro and couldn't wait on Frames to come in the mail. I took the hole spacing from NSA imperfect tiny whoop. I removed some structural components from beta75X Frame to get the Cetus Pro Flight Controller to fit…

Downloads
492
Likes
23
Rating
5
P
PrintablesChris Buisson

Experimental Quad Frame for Cetus X

Here's a fully custom 3D model for an experimental frame for the Cetus X by BetaFPV. It reuses all the factory hardware and even screws, and makes it fly like a different drone altogether. Being more lightweight, I noticed longer duration…

Downloads
415
Likes
31
Rating
4.67
P
Printablestomy983

BetaFPV Cetus X lens protector

After I broke my lens during a crash with a steel beam I ordered the replacement lens (CADDX ANT) and I designed this so it will not happen again. It is a easy but snug and sturdy fit, no glue or anything needed. It adds less than 1 gram…

Downloads
284
Likes
27
Rating
5
P
PrintablesCHAOSDRUCKER

Cetus PRO - Spare Frame

https://amzn.to/3Ekhtg9 (ENG) The Cetus Pro actually already comes in a complete RTF setup. But what happens if the frame should break? Now you don't have to worry about that anymore. I have drawn my own small frame and printed it from…

Downloads
274
Likes
18
Rating
0
P
PrintablesVoxel3D_NL

BetaFPV cetus pro printable landing feet

Nice little 3D print to add little and light landing feet to the BetaFPV Cetus pro tinywhoop drone! Made to press-fit between the 3 protruding edges and print with the pointed part up. Gives around 4.5mm extra ground clearance. Depending…

Downloads
247
Likes
17
Rating
4.67
P
Printables10DESIGN

Frame for Beta fpv Cetus X

I design some frame for the Cetus X from beta fpv. If you want to buy only the parts you can do this on this website (https://betafpv.com/). Other engines also schould fit into it.The frame only wight 39 g if you print it with 15% Infill.…

Downloads
233
Likes
19
Rating
0
P
PrintablesJuan Arreola

Cetus X - Zero Degree Camera Wedge

A component to maintain the camera of your Cetus X drone at a fixed 0-degree angle. This feature proves beneficial for beginners, indoor flying, or those who prefer a more relaxed and slow-paced flight.

Downloads
232
Likes
20
Rating
5
P
PrintablesCNC Kitchen

CETUS MK3: New idler for improved extruder gear

UPDATE 09.10.2021: Added V2 of the idler with a tensioning mechanism. Uses an M3x40 screw and a suitable spring. This replaces the old idler on the extruder and make space for a standard 11mm extruder gear found on many bowden style 3D…

Downloads
204
Likes
19
Rating
0
P
PrintablesMokeDuck

PrusaSlicer Profile for Cetus Mk3 (or mk2)

https://github.com/ast0815/slic3r-for-cetus Based loosely off of this man's work. However, his python script tends to be slow and so I've eliminated it. I've put the necessary changes all into the filament settings: the rest is just the…

Downloads
140
Likes
3
Rating
0
P
Printablesborschaddict

Experimental Cetus X custom frame (Cetus FC compatible)

This is a custom box-style frame for the BetaFPV Cetus X, remixed and modified version from @ChrisBuisson_431849 to support the "Cetus FC" version (offers auxiliary flight functions) and number of other improvements to my liking. It…

Downloads
115
Likes
13
Rating
0

BETAFPV Cetus Pro FPV Drone Kit Wall Hanger

Hang all the gear in the Cetus Pro FPV Drone Kit on a wall for easy access and display.

Downloads
113
Likes
22
Rating
0
P

BetaFPV Cetus X mount for Ista360 GO2

Mount to install a Insta 360 GO2 cam on top of BetaFPV's Cetus X FPV quad drone. To be print in TPU. Keep back in place using an elastic tie.

Downloads
108
Likes
9
Rating
4
P

Landing gear Cetus FPV Drone

I broke my Cetus FPV drone. Here is an alternative to the landing gear, as it is fragile.

Downloads
98
Likes
12
Rating
5
P
PrintablesWaffles4Penguin

Cetus X + Runcam Thumb Mount

WARNING: I have used this canopy on the Cetus X for a while, it was decent, however I think now I tied a few incidences to the design. Ever since I have been using this canopy I designed, the cameras have been breaking at the screw…

Downloads
92
Likes
7
Rating
0
P
PrintablesHugo coleman

betafpv cetus pro custom frame

i just make a lil frame for my cetus pro

Downloads
62
Likes
6
Rating
0
P
PrintablesPantstorm

Stargate Glyph Magnet - Cetus

Second glyph from the Stargate earth address, uses two 5.5mm X 18mm X 4mm magnet

Downloads
58
Likes
14
Rating
0
P
PrintablesLior Schwartz

Cetus X camera angle support

This part supports the camera position and maintains it during a crash add a small piece of dual sided duct-tape at the bottom of the part place at the base of the camera

Downloads
52
Likes
4
Rating
0
P
PrintablesNoah

E3d v6 Cetus 3d mk2 60mm Fan

This is a mount for an E3d V6 Hotend to a Cetus 3d MK2 it may fit the mk1 and mk3 as well but I only have a mk2 for testing. You will need a bowden setup. The fan used is a Noctua 60mm Fan with 5v. Other things required 10 M3 10mm Screws…

Downloads
41
Likes
2
Rating
0
P
PrintablesAst0815

Cetus3D Tool Holder

Simple tool holder to hold the tools that came with the Cetus 3D printer. Fusion360 project link: https://a360.co/2JfKc77 Print Settings Printer: Cetus 3D Rafts: No Supports: Doesn't Matter Resolution: 0.25 mm / 0.5 mm Infill: 15 %…

Downloads
41
Likes
6
Rating
0
P
PrintablesGregTheGreat

Cetus 3D Bl Touch Mount + Cover

Mount for the Bl Touch

Downloads
40
Likes
4
Rating
0
P
PrintablesMadman1027

Drone Carry case - BetaFPV Cetus X Case

I built the Cetus X into an Apex 2" frame, never used the goggles and my main radio is an RM Boxer so the case was destined for the bin, but it's a little good to just waste so I cut the liner out and made my own for transporting some of…

Downloads
38
Likes
9
Rating
5
P
PrintablesZakhar

Cetus X travel case

Have a Betaflight Cetus X drone and thought about case for it with several batteries and other stuf like charger etc. So I've took the idea of these plastic military cases and used same design. The model contains the case, cap for it,…

Downloads
37
Likes
5
Rating
0
P
PrintablesJim.Lee

Cetus MK2 PLUS

Big thanks to Gio Van's Cetus 3D printer ,so that I wouldn't need to start from scratch. Test run videos: (Vs prusa mini)[ https://www.youtube.com/watch?v=mT3fT1IKzkA ] (Voron test cube)[ https://www.youtube.com/watch?v=NwDWOP7rJes ]…

Downloads
36
Likes
5
Rating
0
P
PrintablesJan_P

20x20 Extrusion Spool Rest for Cetus 3D

This was adapted from http://www.thingiverse.com/thing:43756 . The majority of the script is credit to @jeremyalangreen Added a rest area for a filament spool to sit on, specifically designed for the spool holder that comes with the Cetus…

Downloads
34
Likes
3
Rating
0
P
PrintablesNoob

CETUS X alternative frame meteor series style

this is my cetus x frame that i designed to accomidate the happy model ex1103 11000kv motors and the orignal cetus x componets it uses m3 machine screws to mount the canopy to the frame and i was using a countersunk version of the orignal…

Downloads
30
Likes
1
Rating
0
P
PrintablesSemiconductor15

Cetus 3D MK3 Fan Upgrade

I have upgraded my Cetus 3D MK3 buy increasing cooling both for extruder motor, hotend and layers. Great PLA bridging performance, highly recommended. For now, for power I used additional 12V power supply, later on I am planning to change…

Downloads
30
Likes
10
Rating
0
P
PrintablesGregTheGreat

Cetus 3D Y Axis Endstop Holder Front and Z Top Solid Model

Cetus 3D Y Axis Endstop Holder Front and Z Top Solid Model

Downloads
30
Likes
1
Rating
0
P
Printablesadys

Cetus X axis motor foot

Cetus has its x axis motor stick out, and it can tip over to back side and can cause vibrations. In the recent mk3 they are including a foot for x axis motor. But for mk2 they have not published it. I designed it quickly with very minimal…

Downloads
29
Likes
3
Rating
5
P
Printablesnik282000

Cetus X Case with Battery Storage

Fits a CetusX whoop with 12 batteries. Cells will fit in both directions to indicate charged/discharged state. A square pin in the case retains the CetusX using the battery sling.

Downloads
28
Likes
5
Rating
0
P
PrintablesDikone Eto

Leg Protectors for Cetus Lite Brushed

Leg Protectors for Cetus Lite Brushed

Downloads
28
Likes
1
Rating
0
P
PrintablesJankes

BetaFPV Cetus X with batteries case

BetaFPV Cetus X with batteries case It has enough space to Cetus X and 12 batteries, even 550 mAh. External dimensions: 15 x 14 x 7 cm I was inspired by Cetus X Case with Battery Storage by nik282000, but I created this model from scratch.

Downloads
26
Likes
4
Rating
0
P
PrintablesAst0815

Improved Cetus MkII fan duct w/ cooling control

I designed a new fan duct for my Cetus MkII. It is closely modelled after the original. I added a wall under the duct to the thermal barrier, to insulate the heating block from the air flow some more. It also has a little "control…

Downloads
26
Likes
2
Rating
0
P
PrintablesM1324

Cetus3D 40mm Fan Duc-Air distribution optimized

I made this part to replace the original fan duct, because the original fan duct cooling effect is not good. I tested the original fan duct, although the original fan is not weak, but the cooling effect is still not good, because most of…

Downloads
18
Likes
0
Rating
0
P
PrintablesMattK

Cetus3D Feeder Guide 2.0

I have printed a few things using TPU on the Cetus with mixed results. Much too frequently I'd have failed prints because the TPU would bend and push sideways, out from between the feeder gear and the cold-end of the nozzle. My solution…

Downloads
17
Likes
2
Rating
0
P
PrintablesMysticalDork

Cetus Z-axis endstop holder

This is a recreation of the Cetus Mk2 standard Z-axis endstop holder. When mine broke, I searched online and found a set of files for most of the printed parts on the cetus, including this piece - except it's wrong. I printed the version…

Downloads
17
Likes
0
Rating
0
P
PrintablesPedro Garcia

Betafpv CetusX Multi Battery

PT: Atualização! 27/03/2026 V2 com espaços para parafusos (proteção da bateria). Recortes para conectores dos motores. Reforço estrutural em pontos críticos. Compatível com Gaoneng 1s 550mAh/650mAh. Autonomia: 7 min (650mAh) em voo suave.…

Downloads
16
Likes
4
Rating
0
P
Printablesnik282000

Cetus X Case

Cetus X case, uses an M6x45mm screw. Holds 24x BetaFPV 450mah or Lava I 550mah cells in pairs. Up to 12 flights. Case includes a tongue to lock the whoop in place using the battery holster. Category: R/C Vehicles

Downloads
16
Likes
1
Rating
0
P
PrintablesStephen Mott

Cetus3D Vinyl Cutter Holder

This is a holder for a Roland Vinyl cutter to attach it to the side of a Cetus3D extruder. I tapped the existing holes in the extruder to M4, but you could probably use nuts on the inside too. N.B. This is for an original kickstarted…

Downloads
16
Likes
1
Rating
0

Cetus3D mk2 extended z cap for endstop

This is my version of Z axis cap for cetus3d mk2 extended. It is part of conversion to opensource tinyfab MCU, that requires mecanical switch for endstops. Also it has an integrated cable holder. I tried to model this thing in a minimal…

Downloads
16
Likes
0
Rating
0
P
Printablesfrogger1805

cetus3D support bobine

voila un support a imprimé et a utilisé avec les profilés fournis avec l'imprimante pour tenir la bobine d'impression. comme a mon habitude .je fournis le fichier source pour être modifie si besoin.par contre, fini freecad, j'utilise…

Downloads
15
Likes
0
Rating
0
P
PrintablesLogr47

Cetus 3D mk3 additional cooling fan mount

I finally replaced the board on my Cetus for the mellow fly board so I could add an extra part cooling fan and when looking for a new 24v fan I found some Ender 3 set of two fans and thought why not so I made a mount for this little fan I…

Downloads
15
Likes
0
Rating
0

Cetus3D Z probe holder

This is a holder I designed for a precise Z probe for bed levelling. It allows for very precise bed levelling with small offset from nozzle. Compared to it inductive probes are crap. I used it to do grid compensation in smoothieware. My…

Downloads
15
Likes
0
Rating
0
P
PrintablesRaab6

Cetus3D Fan Duct updated for straight air flow

Modified the original part for an air flow which is directed downwards/vertical and not horizontal/diagonal. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100 % Category: 3D Printer Parts

Downloads
13
Likes
1
Rating
0
P
PrintablesSpectura

STC-1000 Temperature Controller Mount for Tiertime Cetus

I recently did a heated bed upgrade on my Cetus which you can see over here on instructables; https://www.instructables.com/DIY-Heated-Bed-for-the-Tiertime-Cetus-3D-Printer/ and needed a way to mount the stc1000 I had chosen to the…

Downloads
13
Likes
1
Rating
0
P
PrintablesClumpsypenguin

Cetus3D MK2 SKR E3 Holder

Originated from the MellowFlyRRFE3 holder for the Cetus3D MK2. I remixed it, so it also has space for a Raspberry Pi Zero 2 W to use with Klipper. Only tested the fitment with an SKR E3 V1.1 DIP and V3.0. Original repo:…

Downloads
13
Likes
1
Rating
0

Cetus3D mk2 extended x cap for endstop

This is my version of X axis cap for cetus3d mk2 extended. It is part of conversion to opensource tinyfab MCU, that requires mecanical switch for endstops. I tried to model this thing in a minimal and elegant manner. Use two M2.5 12mm…

Downloads
12
Likes
0
Rating
0
P
PrintablesRaab6

Cetus3D Motor Mount Straight Adjuster

This part should prevent the motor to bend which means the belt could slip from the pulley. On the picture there is no screw, because I have to look for a long one (M3x12 mm). Hope you can imagine what I intent with this part. If you have…

Downloads
11
Likes
0
Rating
0
P
PrintablesM1324

Cetus 3D PCB Cable Manage Cover current version

From the moment I assembled the machine, I really didn't like the way the cable above the extrusion head was always tilted. So I tried to modify a few PCB covers that I can find on the website, but I found that they all don't match the…

Downloads
10
Likes
0
Rating
0
P
PrintablesPakue

Cetus3D MK1/2 M12 Z Level Probe Mount

A mount to attach a M12 bed levelling sensor (induction or capacitive) to a Cetus MK1 printer. It should also work with an MK2 printer. Needed parts: 3x 8mm M3 cylinder head screws with nuts Print Settings Printer Brand: Prusa Printer: i3…

Downloads
10
Likes
4
Rating
0
P
PrintablesAst0815

Cetus Mk2 custom X-axis endstop mount

I upgraded the CPU of my Cetus Mk2 with a Tinyfab CPU ( https://www.tinyfab.xyz/ ). That meant I had to add some end stops. Fixing them with hot glue worked well as a temporary measure, but something more permanent was in order after it…

Downloads
10
Likes
0
Rating
0
P
PrintablesAndrei Aldea

Cetus 3D Mk II Spool Holder Screwless Retention Bracket

This is a simple little bracket that should prevent the Cetus 3D Spool holder from twisting around and ruining your prints. Because of the notch on the side, this requires a small amount of support material to print. Comment with any…

Downloads
10
Likes
0
Rating
0

Cetus3D MKII extruder cable mount

The included cable mount for the extruder cable is too small. Additionally the Y-axis stepper motor cable flaps in the breeze. This cable mount takes care of both and makes use of the grounding cable and therefore frees one t-nut and…

Downloads
9
Likes
1
Rating
0
P
PrintablesSchlossbauer

Perucetus

A Perucetus. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toy & Game Accessories

Downloads
9
Likes
2
Rating
0
P
PrintablesRaab6

Cetus3D Cable Fix

With this part the cable at the top end of the z axis can not move out of the profile. Use this part at your own risk. You could break the part where it should fit into. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution:…

Downloads
8
Likes
0
Rating
0
P
PrintablesJeff Thompson

Box for BetaFPV Cetus x.

I made tis to hold my Cetus X and intend to put foam at the bottom to hold the tools and spare props. It has holes for 3mm x 1mm neodymium magnets to keep it shut.

Downloads
7
Likes
3
Rating
0

Cetus X battery holder

this an hold cetus X battery

Downloads
7
Likes
2
Rating
0
P
PrintablesAnto D.

Profile Simplify3D for cetus3D print / STL plate

Download file .fff ; import profile for S3D Remix @SyntaxGeek profile 0.2 - 0.6 nozzle https://www.thingiverse.com/thing:3035906 Update 21/10/2018 I loaded the cetus plate drawing; so you can place the piece away from the screws looking…

Downloads
7
Likes
0
Rating
0
P
Printablestobey158

Cetus Mk3 Speaker Cover (on steroids)

So, this monstrosity is what was needed to get my Cetus Mk3 printer to beep at reasonable volume levels (for reference I live in a pet-friendly apartment complex filled with nervous dogs), so I figured I should share. You may print it…

Downloads
2
Likes
0
Rating
0
P
Printablestobey158

Cetus Spool holder stopper

The spools kept falling off of my cetus spool holder. I generally like the spool holder, enough that I wasn't going to print a whole new one, so I printed this, that fits over the holder and stops the spool from falling. A little…

Downloads
2
Likes
0
Rating
0
P
Printables

betafpv cetus pro custom frame

i just make a lil frame for my cetus pro

P
Printables

Betafpv CetusX Multi Battery

PT: Atualização! 27/03/2026 V2 com espaços para parafusos (proteção da bateria). Recortes para conectores dos motores. Reforço estrutural em pontos críticos. Compatível com Gaoneng 1s 550mAh/650mAh. Autonomia: 7 min (650mAh) em voo suave.…