Search results: choke

Sort order

160 models

The chokestick - Airtight bag clip

Features This is a design I made in OpenSCAD after discovering the Slide Zipper at my favorite 100 Yen store. After a few iterations, I ended up with a model that prints in place without supports , that is monolithic (no movable parts),…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
1,425
Likes
462
Rating
4.56
P
PrintablesMatt

Johnson Motor Choke Slide

Choke Slide for a Johnson/Evinrude/OMC boat motor

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
3
Rating
0

Honda ATV Choke cable Insertable Nut (Under choke puller on handlebar)

Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesÖE

Kotte lamp shade (a.k.a. Artichoke)

This lamp shade is inspired by the original design by Poul Henningsen. In Sweden, it is called "Kotte" (the Swedish word for pine cone), and in Denmark "Kogle" (cone). Internationally, it is instead known as "Artichoke". An important…

Downloads
693
Likes
199
Rating
4.88
P
PrintablesMidyew 59

Bug-A-Salt Choke

I designed this to see if I could increase shooting distance and reduce immediate salt spread. From my personal experience it does exactly that. This choke tube seems to help reduce how quickly the salt spreads upon leaving the muzzle of…

Downloads
510
Likes
71
Rating
5
P
PrintablesColton

Choke Tube Case

This is a choke tube case that holds 12Ga 6 chokes.

Downloads
475
Likes
28
Rating
3.5
P
PrintablesPenolopyBulnick

Faux Barbed Wire Choker, Bracelet, and Armband

This choker, bracelet, and armband set is inspired by barbed wire. It is meant to be printed with flexible filament. The choker and bracelet use a clasp and chain to wear and the armband needs ¼" elastic. I usually do your wrist…

Downloads
420
Likes
166
Rating
4
P
PrintablesLes Kaye

12G 20G Shotgun choke boxes

12G and 20G Shotgun Choke Boxes Fully printable one piece design. Long choke boxes for chokes up to 90mm (3.5 inches) in length. Minimum print bed size length 238mm width up to 120mm 12 Gauge - 6, 8 or 10 choke boxes 20 Gauge - 8 choke…

Downloads
361
Likes
49
Rating
5
P
Printablesvaxxi

Choke/balun case for center fed dipole antenna

I really liked the Dipole / Inverted V Balun Antenna Centerpiece from kaliway , but it was a bit of an overkill for a FT140-43, so here's a redesign. Features: smaller, thinner and more compact (should be less than 5-6 hours to print)…

Downloads
337
Likes
47
Rating
4.67
P
PrintablesPenolopyBulnick

Flexible Diamond Link Choker

Background: I've been toying with the idea of making a necklace with a TPU base (because it is more comfortable and durable in thinner layers than PLA) but having a way to incorporate PLA parts since I have WAY more PLA than TPU and am…

Downloads
275
Likes
212
Rating
5
P
PrintablesPenolopyBulnick

Stitched Neck Choker, Bracelets, and Armbands

Stitched neck choker, bracelets, and armbands. Works great for Sally from The Nightmare Before Christmas, Frankenstein's monster, or Monster High character. The necklace and bracelets are meant to be used with a clasp and chain. The…

Downloads
270
Likes
176
Rating
5
P
PrintablesParametric_Paul

Ham portable balun unun choke box

T140 & T240 versions Case for making a portable balun/unun matching transformer capable of 100w when made with the below components. FT140-43 FAIR-RITE FERRITE CORE TOROID RING…

Downloads
239
Likes
26
Rating
0
P
PrintablesCadeyzDad

Choke Tube Storage Box

Inspired by the popular Rugged Box (it didnt work for me as my box is too short) Here is a choke tube storage box I designed for my shooting matches. The box was specifically sized for one of the pockets in my range bag and it holds all 5…

Downloads
215
Likes
22
Rating
0
P
PrintablesKlaus

Choke bowdencable screw / Befestigungsschraube Choker Seilzug - Mikuni BST33

After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.

Downloads
206
Likes
6
Rating
5
P
PrintablesZRex

Prusa Sized Artichoke Lamp Shade

I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too. Print instructions…

Downloads
203
Likes
34
Rating
5
P
Printablesairrelic

Stihl Chainsaw Choke Lever

This is a long obsoleted choke lever that fits Stihl 015L chainsaw and likely many others. Printed using .3 nozzle and .065 layer height. Make sure your machine is dialed in using a calibration cube to insure the lever will fit. Old part…

Downloads
202
Likes
6
Rating
5
P
PrintablesOctantis

Shotgun Choke Organizer

Wasting time on a Sunday I designed this shotgun choke organizer. I designed it specifically for Carlson's Chokes for Mossberg shotgun barrels. I'm pretty sure any other manufacturer would fit. If not just size up the model a bit. The…

Downloads
202
Likes
18
Rating
5
P
PrintablesV3 Precision

Choke Lever and Flap for an Echo SRM225 Trimmer

These parts are for an Echo SRM225 trimmer. It is the choke lever and the choke flap. These parts have been slightly modified from the OEM parts. You will need to remove the factory pieces completely. You will need a #8 x 0.5 inch machine…

Downloads
164
Likes
3
Rating
0
P
PrintablesMint

Choker

A choker you can 3d print!

Downloads
161
Likes
18
Rating
5
P
PrintablesBrent Wood

Infant Choke Tester for Small Parts

This design is from the USA Consumer Product Safety Commission. It is used to determine if a small part is a choking hazard to a child under 3 years old. Put the part into the tube and if it fits completely so that nothing protrudes past…

Downloads
148
Likes
21
Rating
5
P
PrintablesYO3GND

Less ugly balun (RFI choke)

This is an alternate take on the ugly balun/RFI choke. I don't like random pipes and wires and equipment hanging around haphazardly. Eventually I made some real baluns and this made it into the "abandoned projects" bin, but it was a good…

Downloads
134
Likes
9
Rating
0
P
PrintablesXL Studio

Choker - Chain and buckle

manual support is needed for the buckle part. And no support needed for the chian part of the model.

Downloads
130
Likes
20
Rating
0
P
PrintablesStigern

Artichoke Abode

Artichoke Abode – A Whimsical Fairy House for Your Garden or Shelf Tucked away in the enchanted corners of your imagination lies the Artichoke Abode — a charming little fairy house blooming with leafy detail and magical character. Few…

Downloads
123
Likes
43
Rating
0
P
PrintablesHuml13

Tlačítko sitiče (choke) Babetta

Jedná se o neoriginální díl na karburator u Babetty pro lepši vizualní efekt :D.

Downloads
114
Likes
14
Rating
5
P
Printablesvaxxi

Coaxial air wound balun (choke) helper

This is a tiny clip designed to help in winding an air core choke balun (a few loops of coaxial cable which reduce common mode currents). See here for more information on this. The clip is symmetrical (print twice to get a pair). Put…

Downloads
113
Likes
15
Rating
0
P
Printablesewsandor

RF Common-Mode Choke Enclosure

This enclosure is specifically designed to fit my common-mode RF choke built with 12-turns of RG-58 around an FT240-43 ferrite toroid (this is optimized for 40m to 20m HF, but G3TXQ has measurements for other bands as well). The enclosure…

Downloads
107
Likes
12
Rating
5
P
PrintablesPatrik Rosén

Artichoke

A 3D scan of an artichoke, sprayed with cyclododecan spray before scanning. Scanned with the Shining3D Einscan PRO, the bottom is made flat to make it easier to print. I've also uploaded a complete, less heavy version, without the flat…

Downloads
107
Likes
5
Rating
0
P
PrintablesAndy Morris

Predator 3500w Run/ Choke Knob

This is a replacement knob for the Predator 3500w Generator. It is used for the Off, Choke and Run selector. The knob connects to the metal shaft on the generator with a machine screw. Not sure of what size as it was hit or miss for me. I…

Downloads
106
Likes
7
Rating
0
P
Printablesjwingenroth

Echo GT225 trimmer choke lever

The original design had a paddle for your finger that was prone to being hit by the pull cord handle especially if it slips from your hand. This would quickly snap off the paddle. This design should be less prone to this failure.

Downloads
106
Likes
3
Rating
0
P
PrintablesHamRadioDude

SO239 - 1:1 Choke Box For Ham Radio - A Box So You Can Choke Yourself.

UPDATE: I have now included a 1:1 Choke box (11ChokeBox.stl) which does not include that top cover guard. Sup. Now you can go choke yourself…with this 1:1 Choke Balun Kit designed for SO239! For this box, you should be able to use magnet…

Downloads
102
Likes
15
Rating
5
P
Printablesmchiodo

Invector Plus Choke Box

Have been using for about two months and the top still stays together! Stay tuned for 4 choke variants in the future!

Downloads
100
Likes
1
Rating
0
P
PrintablesKy3_actual

Spiral Choker

I found myself in need of a choker necklace and unable to find the one I wanted. So I did what any self-respecting Maker would do; I made it. Just take the choker_plain or super_choker and throw it into any program that can throw a…

Downloads
98
Likes
8
Rating
0
P
PrintablesStephan

Choke Lever for Stihl 193T

The choke lever of my Stihl 193T chainsaw broke off, so I dediced to try to design a new one and print it myself. As I lost the main lever part it looks different than the original one, but that doesn't bother me at all. Works like a charm.

Downloads
91
Likes
7
Rating
0
P
PrintablesThump2010

FT240 RFI Choke Box

This is a nice FT240-31 choke box I use. It uses panel mount connectors as the rg58 I use cannot support the weight of the box, I have had 3 boxes where the ground broke loose from the connector so I went panel mount so I could use an…

Downloads
91
Likes
11
Rating
0
P
PrintablesBonwit

SU carburetor choke clip for Austin Healey Sprite or MG Midget

If you don't have a locking choke knob on your Austin Healey Sprite, or MG Midget, or other vintage car using this arrangement, you might be using a clothespin to hold the choke in position. This simple clip is slightly more elegant. One…

Downloads
83
Likes
7
Rating
0
P
PrintablesPenolopyBulnick

Three Spiders on Web Choker

Designed to be printed with flexible filament, this choker design is of 3 small spiders on a clear web. Color change between layers. Designed with simple shapes in Tinkercad.

Downloads
80
Likes
50
Rating
5
P
PrintablesAB Quintic

Adventure Force Maxim Pro Diessell Choke Muzzle

This is a drop-in replacement muzzle for the Dart Zone-produced Adventure Force Maxim Pro half-dart blaster.

Downloads
79
Likes
17
Rating
0
P
PrintablesAce Gamer

Fuwamoco Twins Choker

Bau Bau! “Not Tommorrow, Toady!!!” - Mococo I recently watched the debut and opening weeks of the new Hololive English's Generation Advent and really wanted to make the choker the Fuwamoco Twins wear! This model might seem difficult to…

Downloads
78
Likes
20
Rating
0
P
PrintablesMrgigg

Abandon All Artichokes - Photo Storage Board Game Insert Collection

Abandon All Artichokes This is a remix of the fantastic Photo Box game insert created by Gut Shot Games . Enough room for all game cards and instruction book that fits above the cards. You will have to curve/fold the instructions or cut…

Downloads
77
Likes
11
Rating
5
P
Printablesiqless

Choke Hazard Test Consumer Product Safety Commission

This is a Choking hazard tester as described by CPSC (Consumer Product Safety Commission) at https://www.cpsc.gov/Business--Manufacturing/Business-Education/Business-Guidance/Small-Parts-for-Toys-and-Childrens-Products The purpose of this…

Downloads
75
Likes
3
Rating
5
P
PrintablesNeonHex04

Echo Chamber Choke Lever Part

Replacement choke lever part for an Echo Chamber blower.

Downloads
75
Likes
2
Rating
0
P
PrintablesKOMPOTKO

Choke part to carburetor for HONDA XRV 750

Choke part to carburetor for HONDA XRV 750 - 16046-MAY-000.

Downloads
73
Likes
2
Rating
0
P
PrintablesGrant

Yamaha Superjet choke knob

Use: This model should fit Yamaha Superjet stand up jet skis Design: Knob was designed to closely replicate the original part Assembly: I filled in the recessed choke symbol with white paint Print settings: Support=Yes PETG or similar…

Downloads
73
Likes
2
Rating
0
P
Printables3DNightmare

Choker glass effect

Do you love the minimalist and elegant style of crystal? Would you like to have a unique necklace that reflects your personality? This necklace is inspired by the finishes of crystal pieces. You can print it in translucent PLA, a material…

Downloads
69
Likes
23
Rating
3
P
PrintablesNX.Richi

Carburetor choke lever

My motorcycle choke lever broke, so I designed one, but better. I suggest printing it with 80% or more, to make it stronger. This model was made in Fusion 360, feel free to ask for a custom model.

Downloads
67
Likes
8
Rating
0
P
PrintablesAB Quintic

Adventure Force Maxim Pro Diesell Choke drop-in barrel

This replaces the inner barrel of the Maxim Pro nose. It is a drop-in replacement. Print smaller end down. May need light supports or a brim depending on your print settings. Choke designed by Diesell.

Downloads
66
Likes
11
Rating
1
P
Printablesharking

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever Purchase at https://www.ebay.com/itm/133667880716

Downloads
66
Likes
4
Rating
0
P
PrintablesAB Quintic

Nerf Pro Sender barrel with Diessell choke

This is a drop-in replacement barrel that integrates the Diessell accuracy choke. This is a new technique for aligning darts that excels in Flywheel blasters.

Downloads
66
Likes
19
Rating
0
P
PrintablesThump2010

1:1 Balun w Choke

This box holds a 1:1 balun and a choke, I used FT240s and a mix 61 for the 1:1 and a mix 31 for the choke as per the Palomar website. https://palomar-engineers.com/ferrite-products/ferrite-cores/ferrite-mix-selection I ran window line…

Downloads
64
Likes
14
Rating
0
P
Printablesecspot

Choke/Balun cap remix for center fed dipole antenna

This is a remix of the cap from the original model to give a little more surface to handle the cap. The original model uses a reverse thread, and this one does as well.

Downloads
62
Likes
4
Rating
0
P
PrintablesJ_NotOnTime

1:1 Air Choke Balun

This is a 3D printed 1:1 air choke balun based on a design from W6NBC, which I can't find the original model for, so, I attempted to make my own. I don't have any testing equipment to make sure it's actually working, so any suggestions…

Downloads
62
Likes
7
Rating
0
P
PrintablesGigabeast

Artichoke Finial - Standalone Model, or mount it on something.

I wanted this for the tops of an arch I bought ages ago from Wilko when they were still in business. The arch turned out to be far too big for our garden, and I decided to leave out some of the rounded arch sections at the top and convert…

Downloads
61
Likes
6
Rating
0
P
PrintablesBailey Prints

12 Ga Choke Box

This is a choke box for 12 Ga chokes. I have several chokes that I use when I shoot at the range. Most choke boxes did not have enough spots for my chokes. This box has room for six chokes and a choke tool/oil. Print Instructions Infill:…

Downloads
59
Likes
4
Rating
5
P
PrintablesAmitkey9

Cookie Cutter - I Hope You Choke

"I Hope You Choke" Cookie Cutter for any occasion... * Important Notice * I had to replace the following files due to an error: Cookie Cutter - I Hope You Choke - Thin - Fabulous Cookie Cutter - I Hope You Choke - Thin - Fancy Cookie…

Downloads
56
Likes
9
Rating
0
P
PrintablesMcJosep

UNIVERSAL CARBURETOR CHOKE KNOB – COLD START PULL KNOB FOR CARBURETORS

HIGH-VISIBILITY CARBURETOR CHOKE KNOB – PERFECT FOR COLD STARTS This 3D-printable carburetor choke knob is designed to replace missing or broken cold-start pull knobs used in carbureted engines. The knob provides a comfortable grip and…

Downloads
54
Likes
10
Rating
0
P
PrintablesCptAmerica

Nibbi Carburetor Choke Cable Adapter

Adapter I created to connect an existing choke cable to a Nibbi carburetor choke plunger. Print with ABS or other filament with high temperature threshold as this part will be exposed to heat. Probably wouldn't be a bad idea to wrap some…

Downloads
53
Likes
4
Rating
0
P
PrintablesProjectPokemon

#067 Machoke – Low Poly Pokémon

Machoke’s powerful physique becomes even more striking in this low-poly style, where its defined muscles are transformed into bold, geometric planes. The angular shapes of its arms, chest, and belt highlight its role as a disciplined,…

Downloads
50
Likes
7
Rating
0
P
PrintablesRoot User

Yamaha Choke Handle

This is a choke handle for my 1988 Yamaha Moto-4 350. This should fit all the Moto-4 series and maybe even the Big Bears. These always seem to break and are impossible to find, so I made my own. I printed mine out of PETG but PLA should…

Downloads
50
Likes
3
Rating
0
P
Printablesdgardner

Amateur Radio RF Choke Box

I made a simple RF Choke using a 2.4" toroid and some RG8X cable. These are attached to your antenna feed line to isolate the feed line from the antenna and filter out bad stuff. It's a fun project. Anyway I needed a box to put it in.…

Downloads
50
Likes
12
Rating
0
P
PrintablesDMT_ZA

Carburettor Choke Butterfly Shaft

Disclaimer: This model comes without any guarentee of fitness for use with your engine - use at your own risk of engine failure. Material : A word of caution first! For a permanent solution a strong, high-temperature filament with…

Downloads
49
Likes
2
Rating
0
P
PrintablesBruno

Manueller Choke/Startvergaser BVF 16n1 Vergaser Simson MZ

Manueller Choke/Startvergaser für BVF 16n1 Vergaser und weitere. Es muss nur eine leicht bearbeitete Schraube in den Startkolben statt dem Bowdenzug geteckt werden und ein kleiner Hebel gebastelt werden. Das ganze sieht dann so aus wie…

Downloads
48
Likes
3
Rating
0
P
PrintablesWerner

BMW R-Series inspired replacement choke cap

A replacement cap for the choke lever

Downloads
46
Likes
3
Rating
5
P
PrintablesLayerusRex

Benelli Advanced Impact (A.I.) 12GA Choke Tube Case

08/29/25 - Uploaded a second version of this model with tighter thread tolerances (a -.15mm face offset instead of a -.25mm face offset). After using several of the original versions for a bit, I didn't like how sloppy the threads felt to…

Downloads
45
Likes
9
Rating
0
P
Printablesnerdbrain001

Bug-A-Salt Modified Choke

I didn't like the choke that came with the Hunter spring/choke upgrade kit. I wanted something that was more focused and had a better profile/attachment. Printed in PLA+ with supports.

Downloads
44
Likes
5
Rating
0
P
PrintablesRik M0RKM

40mm Antenna Feeder Choke Former

This is a simple 40mm tube with cut outs for zip ties. Should not require supports, although if you are struggling with bed adhesion then possibly a raft. I recommend 25-30% infill but YMMV.

Downloads
44
Likes
8
Rating
0
18+

The source marked this model as adult content.

Downloads
44
Likes
30
Rating
0
P
PrintablesRicky Roach

choke tube holder

choke tube holder to….. hold your choke tubes. you need 4 6x3mm magnets, and 2 m3 screws to act as the hinge. made specifically for Browning invector plus extended tubes, will most likely fit Briley extended tubes, and might fit all…

Downloads
41
Likes
3
Rating
0
P
PrintablesKB9RLW

Enclosure for a 1:1 common mode choke

A box I made for an inline 1:1 common mode choke. It was made as part of a video for my you tube channel. Search youtube for my callsign, KB9RLW. The torroid is a T130-2 size wtih insulated 18ga wire and it fits perfectly. Category:…

Downloads
41
Likes
10
Rating
0
P
Printablesblumi

Choke für Sachs Motoren 504 & 505

Choke für Sachs Motoren 504 & 505, Passend für Mofas mit eckigem Luftfiltergehäusen aus Kunststoff für Hercules Mofas der M Reihe (M1, M2, M3, M4) sowie der Prima Reihe. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100…

Downloads
37
Likes
2
Rating
0
P
PrintablesMa77hew

Choke Box

this box holds 5 choke tubes for a 20ga and the wrench.

Downloads
37
Likes
3
Rating
0
P
PrintablesPrintforme

E-Choke Fixierplatte

DE: Fixierplatte für E-Choke, passend für die meisten 50ccm Roller.Das Original Bauteil besteht aus Metall, daher ist das hier nur eine provisorische Lösung!Da dieses Bauteil sehr nah am Motor sitzt und es dort wirklich sehr heiß wird,…

Downloads
36
Likes
4
Rating
0

Bracelet/Choker Placard

The wife decided that we were making bracelets for Halloween Horror Nights, and so I decided that we were doing it our own way. For the bracelets in the pictures, I printed the logos for each of the haunted houses, glued them in place…

Downloads
36
Likes
15
Rating
0
P
PrintablesDeeDee

Choke holder for HONDA CX 500

Choke holder for HONDA CX 500

Downloads
36
Likes
6
Rating
0
P
PrintablesWilts01

RF Choke/Balun FT114-31 Enclosure

This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-31 toroid 2631801202. Note that FT114-31 toroids have the same diameter as a FT114-43 or FT114-61 toroid, but the height is larger at 13.85mm (the…

Downloads
34
Likes
9
Rating
0
P
PrintablesReseal9091

12 Gauge Shotgun Choke Tube Holder / Carrying Case – Dual and Single Versions

I couldn’t find a choke tube holder that seemed practical for field use, so I designed this. These holders are made to fit 12-gauge shotgun choke tubes. The dual version has holes for attaching it to a lanyard or similar, and both…

Downloads
33
Likes
1
Rating
0
P
PrintablesThtunew

1979 Honda CB650 Carburetor Choke Arm

Replacement 3D printable choke arm for 1979 Honda CB650 motorcycle

Downloads
31
Likes
3
Rating
0
P
PrintablesPajaa

Yamaha 2 - Choke knob

Printed with Prusament ASA Jet Black to get better UV stability.

Downloads
31
Likes
2
Rating
0
P
PrintablesRob Williamson

Ryobi Leaf blower choke lever

Ryobi (or others) Leaf blower choke lever. If this fits your model of carby let us know so I can add it to the description. Update: tweak resting angle, add relief for easier installation and reduce overall height.…

Downloads
30
Likes
1
Rating
0
P
PrintablesSGSDoom

Radio-Stuff Common Mode Choke Case

I purchased a premade Common mode choke from Radio Stuff so created a case to protect it from damage when in my rucksack. The case required cut outs to accomodate the coax. The lid then clamps down on the coax to lock in place. These…

Downloads
30
Likes
2
Rating
0
P
PrintablesThe Doghouse

FIXED: Adventure Force Maxim Pro Diesell Choke drop-in barrel

Copied from original post: This replaces the inner barrel of the Maxim Pro nose. It is a drop-in replacement. Print smaller end down. May need light supports or a brim depending on your print settings. Choke designed by Diesell. Supports…

Downloads
29
Likes
8
Rating
0
P
Printablesayedurand

VTR1000F Choke Nut

EDIT: The first version I uploaded should work with a bit of filing or sanding. The issue is that the thread engaged into the carburetor is too long. The base of the thread sets the most retracted position of the choke needle. Mine pushes…

Downloads
28
Likes
0
Rating
0
P
PrintablesFreight Hauler

1996 SeaDoo GTX Choke Puller

1996 SeaDoo GTX Choke Puller Requires (1x) M2x12 socket head machine screw Designed to take two screws, but I didn't allow enough tolerance for that to work out.

Downloads
27
Likes
0
Rating
0
P
PrintablesSilverOwl

1980 Yamaha Enticer 250 Snowmobile Choke Handle

Modelled off the dimensions of the original choke handle. I lost the roll pin for mine, (which would have worked fine), but I found that a 6/32 machine screw fits perfectly as well.

Downloads
27
Likes
1
Rating
0
P
Printablesdiesel_dave

Firman WH Series Natural Gas Choke Shim

If you have a Firman dual fuel inverter generator of the WH series, you can easily convert it to run on natural gas using the pre-existing propane regulator equipment. Simply swap out the propane fitting for a natural gas hose quick…

Downloads
27
Likes
0
Rating
0
P
PrintablesZigzain

Engine choke mount with guide for MLD 35CC or DLE gas engines

Choke lever mount for gas engine MLD 35CC (original) or DLE 35 (not tested). Airplane accessory. = = = = = = use 4mm bolts for fix it = = = = = = If you like it, please donate: Paypal: [email protected] Skrill:…

Downloads
26
Likes
3
Rating
0
P
Printablesrebeltaz

Chinese PDTO Chainsaw Choke Lever - Fringe Case # 869d

A customer brought in a Chinese chainsaw that he'd bought online. The choke level had broken and he didn't have any of the pieces. I've never heard of a PDTO, so I have no idea where to get replacement parts for this or if you even can.…

Downloads
26
Likes
3
Rating
0
P
PrintablesUbermeisters

Paresu / Valese Dragonball Cosplay Choker Charm

No supports required, as there is a disposable support integrated in the file already. I've added a touch of thickness and made the choker slit deeper since the photos of the print were taken.

Downloads
25
Likes
10
Rating
0
P
PrintablesRasmus 3D

Choke for mikuni

The plastik parts for the choke on mikuni carb on a 125 2002 KTM

Downloads
25
Likes
5
Rating
0
P
PrintablesSnomit12

Ariens Snowblower Choke Knob Replacement

Great snowblower, but I guess Ariens decided you have to break the choke knob while removing to service the carb! This replacement knob fits my 2022 24" Ariens. May fit others, I designed the model to be parametric so let me know if it…

Downloads
23
Likes
1
Rating
0
P

Yamaha ET 250 Choke toggle switch

Replacement for a Yamaha ET250 snowmobile choke toggle switch. could possibly work with other gas motor chokes. haven't tested it.

Downloads
23
Likes
3
Rating
0
P
PrintablesDesign by Sroka

Piaggio Ciao Choke Lever Holder

Holder choke lever for PIAGGIO Ciao/Bravo/Superbravo/SI 50ccm 2T AC

Downloads
23
Likes
2
Rating
0
P
Printablesbowrow

90s Seadoo Choke Knob

I decided to make a remix to match the style of the original knob

Downloads
22
Likes
4
Rating
0
P
Printablessroka_p

Choke part Suzuki RM 250

Choke repair part for Suzuki rm 250 with Keihin carburetor. Works great.

Downloads
22
Likes
2
Rating
0
P
PrintablesLazerfox86

Dual end Diessell choke, and rifled barrel (Nerf Pro Sender)

thank you too AB Quintic for the base model, this is a double sided Diessell choke barrel, with a riffled segment in between. improves accuracy and distance of the half darts.

Downloads
21
Likes
8
Rating
0
P
PrintablesRedStorm Fish

Choke Lever

Simple choke lever for really anything. The holes are not in as it is better to drill them to fit your project better.

Downloads
20
Likes
2
Rating
0
P
PrintablesLMJ

Plant Label Artichoke

We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection. Make them any color you wish.

Downloads
20
Likes
1
Rating
0
P
PrintablesTomasBouda

Soap Saver | Soap Dispenser Choker

About I designed this parametric collar to address the issue of soap dispensers dispensing excessive amounts per press, leading to unnecessary waste. This 3D model limits the amount of soap dispensed, promoting efficient use and reducing…

Downloads
20
Likes
6
Rating
0
P
PrintablesWilts01

RF Choke/Balun FT114-31 Enclosure Revised

This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-31 toroid 2631801202. Note that FT114-31 toroids have the same diameter as a FT114-43 or FT114-61 toroid, but the height is larger at 13.85mm (the…

Downloads
19
Likes
8
Rating
0

Choke lever replacement

Print and sand a bit it its too tight. Spray with silicone or suitable lubricant for for smooth operation. Press fit the metal lid in the slot. This part of the carburetor should not get too hot. Maybe ABS is best, but I only had PETG so…

Downloads
18
Likes
5
Rating
0