BCN3D Sigma Cover with ribbon cable holder (no support)
BCN3D Sigma Cover with ribbon cable holder print in ABS no support
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
- Downloads
- 31
- Likes
- 1
- Rating
- 0
60 models
BCN3D Sigma Cover with ribbon cable holder print in ABS no support
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
A direct replacement of Sigma R17 extruder lower bowden tube housing
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
This project wouldn’t have been possible without the support of the CN3D community and partners like Polymaker & BIQU — thank you all! The CN3D Y-CPAP Toolhead is a compact, high-performance solution designed for serious airflow and…
here you can find the last version https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led After making some tests we are glad to share with you the V2 Shroud The version 2 is using 2 more magnets to…
⚠ Note: These parts are printed in ABS with tight fits . ABS shrinkage and warping can affect tolerances, so proper filament tuning is essential. We strongly recommend watching our filament tuning video before printing. Before you start…
Planet Gear 5:1 for Articulation 1 of robotic arm Moveo BCN3D. Because original stepper motors aren't strong enough. It's runnig well with my robot. BOM for one gear set: 1x M8x60 or longer for output shaft - depent of your pulley. 14x…
I remixed Nadir's CN3D cover version for a 4010 fan above because I didn't have a 3010. I also added some holes for cable tie mounting and optimized air outlets. Before use, check the distance between the cover and the upper front…
Later Edit: Links to all the parts we have used to build this ToolHead can be found at the end of this description. Enjoy! Introducing the CN 3D MiniStealthBurner: a revolutionary upgrade for your 3D Printer. (Adapter for more printers…
I recommend printing in PETG for best strength. Layer height 0.12 - 0.16 mm. I recommend printing with a lot of infill, to improve the strength, infill: 50 - 70 %
TRABAJO EN PROCESO Con este upgrade convertimos cualquier SIGMA a filamento de 1.75, usa extrusores Titan y Hotend V6 de E3D Original. Hemos respetado todos los componentes originales de la impresora, los ventiladores, el termistor y el…
📝 The V5 Toolhead just got an upgrade for CN3D hotend users! This version is designed specifically for the CN3D HF hotends, both brass and nickel-plated copper versions, offering optimized fitment, better thermal integration, and…
This isn't just another calibration print. The CN3D Skew, Squareness & Dimensional Accuracy Test was specifically designed to work together with the free CN3D online calibration calculator. Print the model, take your measurements, then…
later edit: i have added the klicky support. The redesigned gantry, featuring a lighter construction, brings a refreshing new look to your MeCreator 2. But it's not just about appearances—this upgrade provides effortless adjustments for…
Gear Clicker Key Tag - Stress Relief Toy for our Printables Members Introducing the Gear Clicker Key Tag – a unique and functional keychain designed as a thank-you gift for my dedicated members on Printables. This isn't just a key tag; it…
This ist a remixed version of the Universal Phone Stand by BCN3D to increase the printability . Category: Other
CN3D Shrinkage & Dimensional Accuracy Test The final calibration step for truly dimensionally accurate prints. This model was designed specifically for the free CN3D Shrinkage Calculator available at:…
:later Edit: 25 December 2023 i realized that i uploaded a wrong part. so if you downloaded the V6 Heat sink holder you need to download it again and reprint it You need to reprint both parts that hold the V6 Heatsink This is only if you…
While i am someone that can't accept using things that could be better i modified a Idea to make it work better. It is not a Remix at all but by the Nature of it's beeing it looks like it and because i respect the simple Idea of other…
A modified version of the 270deg hinges to fit the holes from the enclosure/panels from CN3D from Nadir. BOM qty description URL * 16 m3 heatset inserts(length does not matter) AliExpress / Amazon 16 m3x6 AliExpress / Amazon 8 m3x10…
The other parts you need to complete you Toolhead are located here https://www.printables.com/model/677824-cn3d-mini-stealthburner-4010-blowe-fan-volcano Here are the list of the part we have used to build this ToolHead This design was…
Just a re-visit of the holder for the rapido now compatible with the dragon UHF too
I like Tomasz' original Version for the Prusa I3 MK3, but I own a smaller Prusa Mini+, so I changed some things. When I started I wasn't quite familiar with FreeCAD and Prusa-Slicer, so I had some learnings and of course I would make it…
I didn't have the filament spools as in the original design and it was taking too much time to retrofit for spools I had. It took less time to draw and print tables. I created a camera table (with holes for screws to attach to part E12R1)…
Made for Sovol SV08 TOP HAT Side Exhaust by Nadir@CN3D Better version with smaller footprint that doesn't require any drilling Simple support for PTFE tube so it doesn't dangle around or get into the corner Printing: If you print abs/ASA…
This is a cover to hide all the cables from the Toolhead + a strain relief for the board You can Find the ToolHead here! https://www.printables.com/model/677824-cn3d-mini-stealthburner-4010-blowe-fan-volcano if you are intersexed in the…
Original model made by Nadir from CN3D the lord and saviour of SV08. Please check out his page he is awesome. I just really liked this shroud for it's simplicity and I needed something to my eddy modded SV08. Printed from PETG on Bambu…
This Face Has also Better Cooling Ducts for improved airflow If you want me to share with you how i print this model using 1 Extruder and with a normal 3D Printer just ask and i will make a tutorial. In the Photos you can see this Tool…
Super simple XY axis calibrator. Print a couple of these and slip them over the XY-axis rails to ensure they are parallel... Rhino3D file included if you want to adjust. There are now two variants, one fixed length the stepped with a…
Replacement clip for BCN3D Sigma printer which tends to break with the use. Have some of them printed for the time you need them. It will probably be better to print them with ABS or even nylon. How I Designed This I have included the…
Spool Holder Upgrade BCN3D Sigma / Sigmax This Improved Design for your sigma Original and R19 and sigmax - By Haqbany 2018 Nov this design not require any support . Original 360 Files found here includes New update in design :…
This is a simple housing for the CN3791 MPPT solar controller (for 1S 18650 batteries). I needed a housing for a bare PCB that I ordered here: https://de.aliexpress.com/item/1005009014611437.html . The corresponding solar panel that fits…
These parts allow you to add a slide axis to your BCN3D MOVEO Robot arm. No modifications are required to the original. Updates 12.02.25 On the rotate mount, repositioned idler tensioner for better effectiveness. Updated slider NEMA mount…
With this mod you will be able to use any J-Head extruder with your BCN3D+ by BCN3D Technologies. you will need to fit the fan to your specific hotend, here some options: 1 , 2 , 3 , 4 , 5 my hotend is 5mm longer (compared to the original…
Ich habe einen Modularen Filter Aufsatz für den Ikea Förnuftig Filter erstellt. Die Unterteile haben Bohrungen um auf Nadirs Double Layer Tophat zu passen. Der Aufsatz kann mit einem oder mit zwei 120mm Lüftern betrieben werden. Die Rohre…
SOVOL SV08 CN3D Shroud remixed to support Eddy Duo mounted bottom left while preserving the cooling ducts.
Enclosure for my Sigma. It's main purpose is to keep hot air around the object during prints to reduce warping. It consists of three parts: Outer shell is 4mm thick bent SAN plastic sheet with printed clamps and hinges. The door is…
A simple modification on the amazing large bucket created by BCN3D, I personally printed it in ColorFabb XT, which is great, but I found it to be a little flimsy, with some unnecessary flex, that made the cloth support not quite…
Complete enclosure system for the BCN3D Sigma printer. Category: 3D Printer Accessories
El Z wobble en la NC3D+ puede llegar a volverte loco, así que decidí cambiar las varillas de la Z por unas leadscrew M8 que tenía, son las típicas que se compran en eBay, o preguntale a tu proveedor local... Toda lainformación de como…
SIGMAX logo for replace broken vinyl logo of BCN3D SigmaX 3D printer. Simple and dual extruder versions. Sigmax 3D printer from BCN3D has a vinyl logo on the front side that, with time and cleaning, ends up coming off. This design allows…
BCN3D logo for replace broken vinyl logo of BCN3D Sigma/SigmaX 3D printers. Simple and dual extruder versions. The Sigma and Sigmax 3D printers from BCN3D have a vinyl logo on the back inside that, with time and cleaning, ends up coming…
Hay algunas partes que son muy propensas a romperse, sobre todo la que hace presión en el extrusor. Hemos cogido las originales y les hemos añadido unos anillos de refuerzo. A la parte del extrusor que es especialmente debil cerca del…
Holder for spools with small interior diameters (such as Filaflex and others) for BCN3D Sigma 3D printer . Regular size is 70mm but I have also included a 80mm one in case your spools are big in width. Print Settings Printer: BCN3D Sigma…
Modeled to fit the 6mm attachment hole on the back of these 0.01mm Dial Test Indicators: http://www.ebay.co.uk/itm/223042001357 Category: 3D Printer Accessories
The new BCN3D Sigma and SigmaX R19 printers include a new and improved Z-axis calibration system, which uses gauges instead of the paper we have used until the R17. But the gauges are extremely delicate and it is necessary to have them…
I noticed that the 1.0mm nozzle had a thicker cable that doesn't fit the standard cover, so much in fact that I couldn't fully close it without risking breaking something or at least stripping the screw threads, so I edited the model with…
Nadir's probe options do not include the Sovol Eddy version of the Eddy probe. This places the bottom of the enclosed Sovol Eddy right at the base of the extrusion mount, which appeared to be the same targeted location from the v4 BTT…
With this update your Z axis will be more precise and you will avoid common problems such as Z waving. You will need: 2 x SWZ-063009 precision nuts (I bought them here ) 2 x threaded rod 8x1.5mm (lenght 360mm) (I bought them here ) You…
From the original single spool holder designed for BCN3D+ by BCN3D Technologies, I would like to share with you this "derivate" in order to upgrade it into a double spool holder which uses less parts than two single holders. It's great if…
Just a Model of the little plastic thingy that fits between the ladder and the cross tube. Tchibo #5058589
It's recommended to print it sideways with support structure because of the direction of the layer lines. I've printed it with 3-5 perimeter and 25 - 40 % infill with PETG and/or PA6CF15. Fysetc KlickyPCB is used - don't know if others…
So I cracked my original screen of the BCN3D Sigma R16, and bought the r20 screen in a rush, expecting that assembly would be hassle-free, but found out that it's not a plug-and-play affair. Designed with a calliper, eyeballing some…
push fit. aber kann auch angeschraubt wreden. Idex Pin
With this little BCN3D+ update you'll be able to always insert the SD card right in place. The original "LCD case" part leaves room to accidentally insert the SD card in-between the aluminium back plate and the LCD board. Instructions The…
Remix of the V5 Toolhead adapted for BTT EBB42 Gen 2 . Gen 2 is 5mm taller than Gen 1 and has larger components on the rear face. First time using Fusion 360 — I did my best but the design may not be optimal. Feedback welcome! Changes:…
Simple basket to keep your tools arranged for BCN3D+ by BCN3D Technologies, but I may also work for all MendelMax and derivates. It can be placed in any corner, not just the LCD one. You will need to change a M5x10 screw with a M5x12 (or…
⚠ Note: These parts are printed in ABS with tight fits . ABS shrinkage and warping can affect tolerances, so proper filament tuning is essential. We strongly recommend watching our filament tuning video before printing. Before you start…
This project wouldn’t have been possible without the support of the CN3D community and partners like Polymaker & BIQU — thank you all! The CN3D Y-CPAP Toolhead is a compact, high-performance solution designed for serious airflow and…