Search results: coal

Sort order

203 models

P
Printableseds_3d_shop

Refillable Charcoal / Activated Carbon Filter Replacement for Bambulab X1 / P1S / Upgraded P1P

Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…

Downloads
13,226
Likes
767
Rating
5
P
Printables3D-Druckfactory

H0 coal bunkers / Kohlebansen / Lagerplatz

H0 (scale 1:87) coal bunkers/campsite 100mmx70mm with board. The boards can be inserted variable! H0 (Maßstab 1:87) Kohlebansen/Lagerplatz 100mmx70mm mit Bretter. Die Bretter können variable eingefügt werden! Print instructions Print file…

Downloads
1,697
Likes
79
Rating
5
P
PrintablesCNC Kitchen

Refillable Charcoal Filter for BambuLab X1

This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…

Downloads
1,488
Likes
435
Rating
4.91
P
PrintablesCNC Kitchen

CORE One HEPA & Charcoal Filter

A simple screw-mounted air filter for the CORE One. It will require higher fan speeds during PLA printing due to added resistance. I manually increase the speed to 65%, which results in ~32°C in the chamber. I strongly advise always…

Downloads
1,077
Likes
574
Rating
4.79
P
PrintablesSweetPrints

HEPA + CHARCOAL FILTER / FUME EXTRACTOR - NOCTUA 120MM

Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…

Downloads
855
Likes
416
Rating
4.8
P
Printablesaf12689

G scale coal pile

This is a G scale model coal pile that fits into the POLA coal bunker. It is printed in a generic black PLA that I still had lying around. Update: After 2 months outside in the garden and in the sun, the PLA did deform a bit. The edge of…

Downloads
808
Likes
60
Rating
5
P
PrintablesVegetableTaxes

N scale coal conveyors

Coal conveyor for a coal dealer or small engine yard for a model railroad. Meant for N scale with some chunkier details and simplified parts for printability, but could probably be scaled up for HO as well.

Downloads
610
Likes
72
Rating
0

Centauri Carbon 2 Modular Exaust System (v2.4) Duct, Charcoal and hepa filter options (or mix there of)

Important: there are 2 options that mount to the cc2, one is the pipe which allows you to use ALL/Any of the MODULAR system, the other is just a connection to go from the cc2 to what ever ducting you have, this does not allow any of the…

Downloads
569
Likes
130
Rating
4.75

HO Coal Load (Accurail)

Remix of zbigmik coal load scaled to fit into Accurail 7500 Series 70-Ton Offset Side Triple Hopper.

Downloads
568
Likes
24
Rating
5
P
PrintablesHjort Creations

Coal for H0 model train

I've printed them standing using a FDM printer and used the slicer to cut the ends for a cleaner print. I used supports.

Downloads
560
Likes
50
Rating
5
P
PrintablesChris Schmuck

N scale coal trestle

N scale coal trestle

Downloads
550
Likes
95
Rating
0

N Scale Coaling Tower Model

A model of an N scale Coaling Tower, inspired by Bachmann's . At the bottom of the page in the Other Files section you will find instructions on how to assemble. Please download it. N Scale Coaling Tower Model © 2024 by Gabe N is licensed…

Downloads
507
Likes
72
Rating
5
P
PrintablesMichal Fanta

Coal Wagon for Wooden Tracks

Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…

Downloads
381
Likes
54
Rating
4.25
P
Printablesmeet

Alaternative and repaired Coal load for Coal Wagon for Wooden Tracks

Repaired and improved versions of coal load for Coal Wagon for Wooden Tracks from Michal Franta . The motivation for making this remix was the wrong size of coal load in original Coal Wagon from Michal Franta. This model has right…

Downloads
368
Likes
9
Rating
5
P
PrintablesPerk

Coal trolley for model trainroad steam train depot H0 1:87

Imaginary coal trolley/bucket for use with model railroad steam depots (the coal storage) There are 2 versions, 1 slightly larger than the other. I've included the beams for the coal depot, the wood I used were scraps of balsa. scale 1:87…

Downloads
345
Likes
30
Rating
0
P
Printablessanslos

K1 HEPA+Charcoal filter

Another variation on adding filtration to the Creality K1. This one includes HEPA (for particulates) and activated charcoal (for VOC, volatile organic compounds) in one snap-on assembly requiring no modification of any sort to the K1.…

Downloads
340
Likes
66
Rating
5
P
PrintablesRaynovate LA

CREALITY K1 ACTIVATED CHARCOAL AIR FILTER

**UPDATE: Although very tight at first, the filter seems to loosen and can fall off over time due to the K1 back ribs flexing outward. Recommend using doubleside tape or similar adhesive to keep filer plugged on the K1 (6/12/2024)…

Downloads
331
Likes
76
Rating
5
P
PrintablesRobagon3D

Hot Coals for Gloomhaven (1, 2, & 3 Hex)

Hot Coals overlay tiles for Gloomhaven board game, 1, 2, and 3 Hex. These are ~4.75mm thick, feel free to scale in Z if you want it a little thinner. Used http://3dp.rocks/lithophane/ to generate replica of original game artwork from the…

Downloads
317
Likes
34
Rating
5
P
PrintablesBazzalight

Lump of Coal Trophy

A mounted Lump of Coal for that special Christmas gift Parts should not need supports and are glued together. Blank Plaque part for your own special message editing. (perhaps the Slicer Text feature may work for you) I used Slicer options…

Downloads
312
Likes
12
Rating
5
P
PrintablesLeon Groove

H0/HO Coal cargo / Kohle Ladung für Märklin Hochbordwagen

H0/HO Coal cargo / Kohle Ladung für Märklin Hochbordwagen size: 87x29mm 97x29mm 144x29mm remixed from https://www.thingiverse.com/thing:3200942 The dimensions are actually slightly bigger, they fit my Waggons qiuet nice with less wiggle…

Downloads
307
Likes
34
Rating
0
P
PrintablesChris Schmuck

N scale coal dealer office

Just a small office I used at my N scale coal dealer Category: Hobby

Downloads
266
Likes
29
Rating
0
P
PrintablesDetailrail

Wagon load for n gauge wagons can be scaled up for use with ballast or coal

Wagon load for n gauge wagons can be scaled up for use with ballast or coal

Downloads
265
Likes
16
Rating
0
P
Printableshockeygoalie35

Desktop Solder Fume Extractor (120mm Fan, Charcoal filter)

Made a quick project to reused an old 120mm fan, a switch, and a 12v barrel jack. Charcol Filter optional. Hardware: Qty 12 M3x7 Heat-set Threaded inserts Qty 4 M3x30 Socket cap Screws Qty 8 M3x10 Socket cap Screws Electronics Power Jack:…

Downloads
260
Likes
60
Rating
3.5
P
PrintablesBeusekomse Baan

Coal load compatible with Märklin 58366 Fad 50 Ootz - Gauge 1 / 1:32

Thanks for sharing your nice design of coal loads, "zbigmik" ( https://www.thingiverse.com/thing:3179335 ) This is an adjusted/re-sized version of the "h0-files" to create a simulated load of coal, ore or rocks for my Gauge 1 (1:32)…

Downloads
260
Likes
29
Rating
0
P
PrintablesRealPrint

Coal Load / Kohleladung

This is a remix of Krafttrains' "Coal Load HO Scale". It has been raised and resized to fit three different Märklin wagons. Das ist ein Remix von Krafttrains "Coal Load HO Scale". Es wurde erhöht und die Größe an drei verschiedene Märklin…

Downloads
239
Likes
17
Rating
0
P
PrintablesKowa

Coal Cooker

Coal cooker (1930-1950) with a movable oven flap. A small paper clip is needed to hinge the oven door. scale 1:15 __________________________________________________________ Kohleherd oder Stangenherd (1930-1950) mit beweglicher…

Downloads
234
Likes
114
Rating
5
P
PrintablesKyle Pastor

Minecraft Christmas Coal

Have you been naughty?? Well you just might get this Minecraft inspired coal in your stocking this year! Designed to give that pixelated look but add some depth. Print with black or another dark PLA to give it that 8-bit coal look. Meant…

Downloads
216
Likes
53
Rating
4
P
PrintablesSteedMaker

Coalition Sculpture

This is an abstract sculpture that represents elements coming together and unifying. Print Settings Rafts: No Supports: No Resolution: hires Infill: 20% Category: Sculptures

Downloads
212
Likes
48
Rating
4
P
PrintablesIsaac Martinez

Coal: The Naughty List Joke Present

Fun little joke gift for the people that are on the Naughty List ahaha Use some magnets to keep a little bit of money or other small objects inside!

Downloads
211
Likes
48
Rating
0
P
PrintablesNakka

Parametric Creality K1 Exhaust Fan Air Filter for Charcoal Pellets & Filter Cartridges of any size & type (OpenSCAD model)

I designed this filter so that I can use charcoal pellets on my K1. The ventilation grid is optional and can be disabled (set parameter vww to 0 ), so that you can use filter cartridges of any size and brand. I'd suggest to print this…

Downloads
210
Likes
46
Rating
0
P
PrintablesRevHazlett

"STOP VOC" 120mm Fan Charcoal Air Filter

UPDATED DESIGN: I completely re-designed this to be smaller and more effective. New model can be found here: StopVOC Redux I printed a lot of matte PLA recently and it was stinky. Walmart has tubs of activated charcoal for $8, and I had…

Downloads
207
Likes
49
Rating
5
P
Printablesmanmac

Large CORE One HEPA & Charcoal Filter

Thanks to Stefan from CNC Kitchen for the great model. Easiest way to print is loading the 3mf file. If you want to use the stl load the filter stl right click on the core one filter in the right dialogue add modifier > load … right click…

Downloads
201
Likes
75
Rating
5
P
Printablesjack@meow

Refillable Charcoal Filter and Hepa for BambuLab X1 Carbon, P1S, P1P, X1

The HEPA filters: uses the same HEPA filter as BentoBox. It is 80mmx40mmx15mm you can get it on Amazon or Aliexpress

Downloads
188
Likes
44
Rating
5
P
Printablesgexgecko

Japanese-Style Hand Fan (for charcoal)

Japanese-Style hand fan for fanning charcoal (Binchō-tan). I guess you could use this for other fan uses as well? Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.26 Infill: 15 Filament:…

Downloads
185
Likes
46
Rating
5
P
Printablesandrew.chersky

VGrow Charcoal Filter

VGrow Vivosun has an awful filtration. Hope you will find this model useful. This model is designed for 2 mm sealing tape or foam rubber on each side. Materials: HEPA Paper - H10 up to H14 Active Charcoal - 1 kg Sealing Tape or Rubber…

Downloads
168
Likes
8
Rating
0
P
PrintablesWeiiy

hookah shisha coal box

hookah shisha coal box for 26mm coal cubes. handle is a 18/8 mount to hold the head during preparation.

Downloads
168
Likes
37
Rating
5
P
PrintablesJohn Doe

CORE One HEPA & Charcoal Filter - Remix using magnets for attachment

This remix uses the similar (exact same) approach for attaching the filter unit as https://www.printables.com/model/1182705-vento-for-core-one-activated-carbonhepa-filter You need to glue the 6x2 magnets to the holes for magnets( they are…

Downloads
167
Likes
38
Rating
5
P
PrintablesSpifer

120mm Fan Charcoal Air Filter

I wanted to shrink down the original to give the air a better chance of making it through the charcoal and also so that it would fit better inside an enclosure. Make sure to use the wedge from the original design

Downloads
156
Likes
32
Rating
5
P
PrintablesMaybeSpooknik

Qidi Plus 4 Refillable Charcoal Filter

A simple design that allows you to use loose charcoal pellets to refill the exhaust filter on the Qidi Plus 4. This goes together well with the larger 8038 exhaust fan mod Support for 4 mm charcoal pellets + scorch, the Nevermore pellets…

Downloads
149
Likes
37
Rating
5
P
PrintablesChris Schmuck

Kennebec Central coal cars HOn30

The Kennebec Central has 8 coal cars. 3 of them were made from flatcars. 5 of them were longer. These are old files. I use two 1/16" dia tungsten welding rods under the cars to keep them straight. Category: Hobby

Downloads
146
Likes
18
Rating
0
P
Printablesaf12689

Coal load for LGB waggons

These are coal loads for different LGB waggons. After creating https://www.printables.com/model/170915-g-scale-coal-pile I wanted to have a version that fits into a LGB waggon. I re-wrote the script and created coal loads for the…

Downloads
145
Likes
19
Rating
5
P
PrintablesSpinodal_Zeugma

Nucleum: Coal Power Plant Smoke

This is a smoke cloud to insert inside the coal power plant standee in the board game Nucleum. This insert replaces the cardboard smoke cloud that comes with the game and never stands up terribly well. The smoke cloud itself was adapted…

Downloads
138
Likes
12
Rating
5
P
Printablesclawp

Nucleum: Coal Smoke for Cooling tower

Smoke cloud to insert inside the cooling tower standee for Nucleum.

Downloads
126
Likes
20
Rating
4.67
P
PrintablesAJ

coal miner

coal miner

Downloads
124
Likes
9
Rating
5
P
PrintablesChuck McDuck

QIDI Q2 Charcoal Filter Replacement

This is supposed to replace the included 3 in 1 filter in the QIDI Q2. The stock filter is really restrictive and is not sealed against the walls very well, so basically nothing goes through the filter, and the fan doesn't do much. This…

Downloads
120
Likes
31
Rating
5
P
Printablesjocin

Refillable Charcoal Filter for BambuLab X1 with HEPA-Filter

Remixed the awesome “Refillable Charcoal Filter for BambuLab X1” form CNC-Kitchen because i wanted to use a little HEPA-Filter + activated charcoal. Therefore added a inlay which sits on the HEPA-Filter so that i can fill the rest of the…

Downloads
120
Likes
31
Rating
0
P
PrintablesTG

Toy Train Coal Car BRIO / IKEA compatible

Coal Car toy train (BRIO / IKEA compatible) A big thank you to SCHWEINERT.COM Without your fantastic Locomotives and Tanker Car, I would not have been inspired to design this Coal Car. No train is complete without Coal Cars and Box Cars.…

Downloads
119
Likes
17
Rating
0
P
PrintablesImburr

Brass Birmingham Coal & Iron Market Overlay

I was tired of having the coal and iron cubes unorganized and sloppy in the marketplace of Brass Birmingham. There are a few box insert prints which have lids which hold cubes, but they didn't work for me. So I designed this from scratch.…

Downloads
116
Likes
8
Rating
0
P
Printablesjamesholg74

Activated charcoal filter Quidi X-Max 3

You can use activated carbon pellets with my version. The unpleasant odour when printing ASA or ABS is reduced very well. IMPORTANT !!! You should be aware that despite the filter, toxic gases still circulate. So only process these…

Downloads
116
Likes
32
Rating
5
P
PrintablesC3D Garage

Creality K1/K1C exhaust charcoal filter holder for magnetic attachments

This model is perfect if you have a K1C and wanted to add detachable ducting to the exhaust fan with the original activated charcoal filter, or if you have a regular K1 and wanted to add both. This press fits into place on the back of the…

Downloads
115
Likes
18
Rating
5
P
PrintablesPEZ3D

Bambu Lab X1C Charcoal Filter Box For Chamber Fan

I made a simple refillable charcoal box for the Bambu Lab X1 (may fit others) so you can buy charcoal pellets and refill the filter instead of buying new ones. I made model solid, so you need to set top and bottom layers to 0, then pick…

Downloads
115
Likes
11
Rating
0
P
PrintablesPixel_Peeper

Enhanced Activated Charcoal Filter for Creality K1 Series Printers

This filter for the Creality K1 series printers allows the user to add more activated charcoal for an enhanced exhaust air filtration. The mount of the filter matches the geometry of the stock filter and therefore this filter attaches to…

Downloads
112
Likes
15
Rating
5
P
PrintablesLimeThemUp

Qidi Plus 4 Auxiliary Fan HEPA Charcoal filter

Note, see the remix of this model by Mike Wil for 15mm thick filters rather than 14mm filters, and with even more clearance from the z-blocks than the V3 version if required. V3 - A user reported that the V2 clashed slightly with the Z…

Downloads
106
Likes
39
Rating
5
P
PrintablesLetItRipMT

N Scale Coal Load

N scale coal load I scaled down to fit a coal car I had. 2 versions depending on depth *I printed in white to match a Christmas coal/ snow hopper I have in O gauge

Downloads
100
Likes
11
Rating
5
P
PrintablesBeusekomse Baan

Coal load fitting the thender of the LGB/Aster Frank S live steam locomotive.

I redesigned https://www.thingiverse.com/thing:652858 to fit the tender of the LGB/Aster Frank S live steam locomotive. Can easily be printed without support due to the concave shaped hollow interior.

Downloads
98
Likes
8
Rating
0
P
PrintablesRandy Mower

Western Maryland Rwy. Coal shed G Scale

G scale model of a Western Maryland Railway standard coal storage shed. These were placed around buildings to provide storage for coal used in stoves Category: Toy & Game Accessories

Downloads
96
Likes
7
Rating
0
P
PrintablesiRndmz

Charcoal Pencil Case

For my fellow artists who sharpen their charcoal pencils manually with a knife, they know how fragile the tapered tips can be. I couldn't find something portable and attachable online, so I made my own. This case is great for sketching on…

Downloads
92
Likes
26
Rating
5
P
PrintablesFlamastero

Coal cart

This is a model of a coal wagon. I recommend printing at 200% scale. The wheels from the wagon do not spin when moving. 😊 I recommend PLA material with 15% fill

Downloads
88
Likes
12
Rating
5
P
PrintablesNikdfish

Activated Charcoal Negative Pressure Air Filter

I wanted an activated charcoal air filter for the flip top LACK enclosure of my Qidi 6.08 mono resin printer. There was sufficient room in the enclosure for a fairly large filter element. I built a filter core sized around the intake of a…

Downloads
88
Likes
12
Rating
0
P
Printablestobey158

Spicy Coaltana (Grounded 2 version)

This is the Spicy Coaltana from the video game Grounded 2 (its design was updated from Grounded 1, so now both versions are available in my Grounded collection). There are two versions, with and without the ribbon that trails from the…

Downloads
85
Likes
9
Rating
0
P
PrintablesMetalmac

K1 Max exhaust active charcoal pellet and hepa filter

This is a custom filter for the exhaust of the K1 max. As the exhaust sold by Creality is a joke of a filter, I wanted to clean the air leaving the machine as much as I can. The internal and external charcoal boxes are printed face down…

Downloads
84
Likes
10
Rating
0
P
PrintablesChris Ondrovic

Elegoo Air Purifier Activated Charcoal Insert

Drop in to use activated charcoal. pellets are chips Print Settings 0.2 Layer Height 6 perimeters, 0 Top, 0 Bottom, 20% infill Rectangular Pattern, no supports required Printed in PETG

Downloads
84
Likes
12
Rating
5
P
Printablesboothyboothy

Sketching Charcoal Stick Holder for Artists

This is a simple holder\handle for keeping your fingers clean when sketching or drawing with a charcoal stick. The holder will take from 3 - 5 mm diameter pieces of charcoal. Printed in PLA with 100% infill and 3 perimeters on an Ender 3…

Downloads
83
Likes
25
Rating
5
P
PrintablesManimal

Protein cover for an Aristo-Craft 3-Bay 100 Ton coal hopper.

Railroads use these to temporarily convert coal hoppers for hauling grain.

Downloads
83
Likes
13
Rating
0
P
PrintablesBeusekomse Baan

Coal Tender and coal load for Aster Hobby BR86

I purchased a used Aster BR86 - 86 005 - a while ago. The price was low because the coal tender top section was missing. I reconstructed it in brass sheet, but this item lacked many details. That's why I opted to 3D-print it. M2 holes for…

Downloads
80
Likes
3
Rating
0
P
Printablesnilson_fx

Activated Carbon Charcoal Air Purifier for 120mm Fan

I came across the model of RevHazlett and the remix from Spifer and decided to create a remix as well minimizing the design and making it a bit more suitable for my needs. Printing: For the Fan Cover simply remove all solid surfaces and…

Downloads
75
Likes
21
Rating
5
P
PrintablesDeltapie

passive activated charcoal filter

just a simple holder for activated charcoal pellets. great for closed smelly areas(shoe closets, fridge) you can adjust the fill ratio for smaller pellets g-code is designed to make 2 of them so if you want to make only one, please use…

Downloads
72
Likes
18
Rating
0
P
PrintablesBrian Wilkins

Elegoo Mars 2 Pro Activated Charcoal Box

This is a remix of the filter box by 1C1OOCC. It is scaled to 90% for you in order to fit the Elegoo Mars 2 Pro. Otherwise, no other modifications were made to the original. Parts were organized to help people print the parts in order. It…

Downloads
70
Likes
11
Rating
4
P
Printablessirskellybones

coal for bad childern

a piece of coal

Downloads
69
Likes
6
Rating
0
P
PrintablesMike Wil

More Clearance Qidi Plus 4 Auxiliary Fan HEPA Charcoal filter

Thanks to LimeThemUp for the original work and providing the step file. I could not get the V3 right and left ducts to fit in place. They were too deep to fit between the side wall and the z rod mounts on my machine. I took .75mm off the…

Downloads
69
Likes
12
Rating
5
P
PrintablesRPG Fan

RIFTS Coalition Deadboy Trio

Generated model from the three deadboys drawn in the RIFTS sourcebook The models appear solid with just a few subtle flaws.

Downloads
66
Likes
6
Rating
0
P
PrintablesAaron

Charcoal Canister Filter Holder

Holds the f/Air canister off the bench to give clearance for airflow to the vents underneath.

Downloads
66
Likes
3
Rating
0
P
Printablesbglasford1

Core One Low Profile Filter for HEPA/Activated Charcoal Filter

There were no filters out there that met all my requirements. The requirements are: Low profile to minimize distance between printer and back wall. Filter exhaust exits to either side so as not to interfere with removable top or MMU.…

Downloads
65
Likes
24
Rating
5
P
PrintablesPrism08

Bird house for coal or marsh tit 28 mm hole

For all outdoors designs you need to use PETG! PLA will melt with or without global warming… Print settings: 0.3 draft, gyroid 10% infil. It will nearly max the Prusa MKS3 buildplate (rotate the BH body 90° so it fits) For the front panel…

Downloads
65
Likes
11
Rating
0
P
PrintablesRPG Fan

RIFTS Coalition Biker

Generated from its depiction in the RIFTS sourcebook. Decent model, nice and solid.

Downloads
63
Likes
4
Rating
0
P
PrintablesRPG Fan

RIFTS Coalition Deadboy Soldier

Generated from a line drawing in the RIFTS sourcebook. Nice solid model.

Downloads
62
Likes
6
Rating
0
P
PrintablesRPG Fan

RIFTS Coalition Death Head Soldier

This model has a slight flaw where there is a tiny version of the model as an artifact when it was generated from an image in the RIFTS sourcebook.

Downloads
61
Likes
7
Rating
0
P
PrintablesGuido

Coal tit Birdhouse

Coal tit Birhouse - Easy to print and simple montage. No Screws, no glue. Easy to clean. Slide the roof up from the front. Press the perch into the hole. Verry smooth STL files. Also take a look at my other models, and please like them…

Downloads
60
Likes
9
Rating
0
P
PrintablesMORPHIUS_LABS

Exhaust air filter - doubled (active charcoal + HEPA filter) SOVOL SV08

Housing for a charcoal and hepa filter to plug it over the original fan at the back of the SOVOL SV08 for printing ASA and ABS or other bad fume creating filaments. I'd suggest to print it out of TPU. I did it out of ASA because I was…

Downloads
57
Likes
6
Rating
5
P
PrintablesEMT EOD Martin

Coalition Deadboy Helmet

I am a fan of the Rifts RPG by Palladium Games. I wanted a prop for a campaign, so I made this from reference pics in the game. This is designed to sit on a stand as a prop, however it could be a jumping off point for something wearable…

Downloads
57
Likes
7
Rating
0
P
Printablesxhico

CORE One HEPA & Charcoal Filter Magnet + Guide Pins

Hello! This is a remix of the popular CORE One HEPA & Charcoal Filter by CNCKitchen. Changes: 8x3 magnets Guide pins to more easely find the spot. Print Settings: PLA 0.20 Structural 8% infil 4h print time

Downloads
55
Likes
9
Rating
0
P
PrintablesRPG Fan

RIFTS Coalition Death's Head SF Heavy

RIFTS Coalition. nice model, seems to ahve some sort of minigun on its back leg, but otherwise solid, no floating regions from what I can see. From the RIFTS fandom wiki: The 3rd Security Forces Division is considered as one of the three…

Downloads
55
Likes
5
Rating
0
P
Printablessnart

Active charcoal carbon and hepa air filtration system

Here is a clean looking, easy to print, and easy to assemble air cleaning system that circulates air through a charcoal carbon pad and hepa filter inside an FDM printer enclosure. Note that this is not intended to replace proper venting…

Downloads
54
Likes
26
Rating
0
P
PrintablesEvaMika

Prusa SL1(S) Charcoal Filter

Carcoal filter to use charcoal pellets. Gcode files for prusa mini, mk3s, mk4 and XL. you can meke your own settings if you use other printers: add box modifier in the center of the main filter body and the lid, and choose top and bottom…

Downloads
54
Likes
9
Rating
0
P
PrintablesRPG Fan
Downloads
53
Likes
5
Rating
0
P
Printablespotbellytron

Weber Charcoal Grill Foot - 65 Degrees

Many of the grill feet are for different revisions of Weber's charcoal grills with the wrong angle. This is for grills with a front leg that's at a 65 degree angle from the ground. Printed PETG with 3 wall loops and 40% infill.

Downloads
52
Likes
7
Rating
5
P
PrintablesRPG Fan

RIFTS Coalition Air Support

Nice clean interpretation of a line drawing

Downloads
51
Likes
2
Rating
0
P
Printablescartyski

Low Poly Coal Gift Box

Entry for the Makerworld Christmas contest. Includes Fool's gold. Very hard to open first few times.

Downloads
51
Likes
9
Rating
0

Coalmine Canary - Brass Lantern Minis

One of the many TTRPG minis published by me on Printables. Printable in FDM as I have on my Bambu A1 mini with eSun PLA+ on a 0.4 mm nozzle (0.2 for more detail but not essential)

Downloads
48
Likes
7
Rating
0

Coaling Tower for Wooden Trains - Brio Compatible

This coaling tower can provide fuel for all of your Brio or other wooden trains. Multiple versions are available. One version is split into three sections to allow for multiple colors without an AMS. If you like this model check out this…

Downloads
48
Likes
15
Rating
0
P
PrintablesDawson

Coal Load HO Scale

this piece is for ho, ho-on30 scale train hopper cars has put together and tested this HO scale train load for your model trains.

Downloads
47
Likes
3
Rating
0
P
PrintablesLama

QIDI TECH Q1 Pro - Vent outside box, for active charcoal

to mount, and connect with silicon, Stop toxic smell from ASA Works well, demont box hard

Downloads
46
Likes
10
Rating
0
P
PrintablesHMartinez

Charcoal/HEPA filter adapter for Snapmaker U1 Top Lid exhaust vent

For those who would like to filter the output of the exhaust vent on the Snapmaker U1, this adapter easily enables it. It is a low-profile external solution that uses a readily available off-the-shelf filter that is available on Amazon…

Downloads
46
Likes
13
Rating
5
P
PrintablesRPG Fan

RIFTS Coalition Spider Walker

Generated from a drawing in the RIFTS sourcebook. Includes a tiny deadboy for scale

Downloads
45
Likes
5
Rating
0
P
PrintablesRPG Fan

RIFTS Coalition APC

Armored Vehicle for the Coalition Security Forces Death's Head Division, RIFTS RPG Nice vehicle, has overhangs but is a solid model and could be modified to fit other wheels. Clean model with no floating volumes.

Downloads
45
Likes
2
Rating
0
P
PrintablesRPG Fan

RIFTS Girly Coalition Dead"boy"

Yet another rendering of the RIFTS RPG

Downloads
44
Likes
4
Rating
0
P
PrintablesMatosawitko

Bethgon Coalporter II - N Scale

The original Bethgon Coalporter was introduced by the freight car manufacturing division of Bethlehem Steel in 1978. After spinning the division off as Johnstown America Industries, later renamed to FreightCar America, they began to…

Downloads
43
Likes
9
Rating
5
P
PrintablesPhylius

Dark souls 2 - Coal tar enemy (miniature) 25mm / 28mm scale

This model is based off of its appearance Dark Souls series: Fits on 40mm wargaming base. I made these models myself - they are hand sculpted from basic shapes in blender software. No custom brushes or library of tricks. yet. This model…

Downloads
42
Likes
8
Rating
0
P
PrintablesKahnindustries

EXO: Exodus Coalition Elite Dangerous Wing Badge

EXO: Exodus Coalition Elite Dangerous Wing Badge Single part or separate pieces, glue together Wing website www.exowing.com Print all the small parts face down to make it easier to fit together Print instructions Category: Video Games…

Downloads
41
Likes
1
Rating
0