Search results: copter

Sort order

733 models

P
Printablesagepbiz

Pull Copter Finger Ring

Like this design? Check out the Pocket Copter! Fast to print and assemble. No screws or glue needed. Prints without Support Structures: https://www.printables.com/model/421807 Pull Copter Finger Ring Projectvideo:…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
27,714
Likes
6,353
Rating
4.79
P
PrintablesWP_Master

Helicopter Mi-24V Kit Card

I've made a kit card model of the helicopter I really like. This model can be displayed everywhere and can be great gift. Printing instructions: Layer height: ≤ 0.15 mm Infill: 100% Material: PLA (PETG might work too, but I have not tried…

Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant

Downloads
2,434
Likes
500
Rating
4.78
P
Printables3DVJ Models

Hand Powered Helicopter/Propeller Toy

Simple yet fun toy to use outside! Be mindful when using indoors, your walls will thank you later. I created this model in aim to replicate ones seen at local events in my area. After researching more on these toys I found you generally…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
1,596
Likes
237
Rating
4.75
P
PrintablesTeo_211

UH-60 Black Hawk Helicopter Wall Art

Wall Art silhouette model of the UH-60 Black Hawk military helicopter. Adjustable size. I accept model suggestions.

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
797
Likes
139
Rating
4.83
P
Printableszuim

Fully printed Quadcopter/Drone Frame for 9" propellers

This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
636
Likes
123
Rating
5
P
PrintablesSurfalex2000

ROTOR PIN for PLAYMOBIL Rescue Helicopter 3845-A || Rettungshubschrauber

I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
317
Likes
26
Rating
0
P
PrintablesTeo_211

Airbus Helicopters H130 Wall Art

Airbus Helicopters H130 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
28
Rating
5
P
PrintablesTeo_211

Eurocopter AS365N3+ Dauphin Wall Art

Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
10
Rating
5
P
Printablesbitugraph

Tailrotor for Playmobil Helicopter

The kids inherited a used (older model) Playmobil helicopter from their older cousin. Problem: the tail rotor was broken, only half of it was remaining resulting in loss of airworthiness. Their dad could not look at it any longer and made…

Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
5
Rating
0
P
PrintablesFalling Entropy

Drone Quadcopter - mini sculpture

This minimalist sculpture of a drone quadcopter goes well with many decors. The sculpture is freestanding on a desk, shelf, cabinet, etc. Prints fast without supports.

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
5
Rating
0
P
PrintablesJirkaStverak

Propeller (helicopter) with launch pad

Hello My first idea why I created this kit was to test various small rotors. But it became a great fun. It uses ordinary kitchen rubber bands as its power source. You can compete with friends and your children to see whose helicopter…

Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
2
Rating
0
P
Printablesh2odragon

ACME Helicopter Hat sign

100x160mm sign, advertising the ACME Helicopter Hat, yet another impossibly unwise ACME product. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesMeister Edel

Strong Flying Propeller / Pull Copter (No Supports)

Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…

Downloads
114,723
Likes
23,034
Rating
4.91
P
Printablesagepbiz

Pocket Copter

Projectvideo: https://youtube.com/shorts/1tkvioQbD9o v2: https://youtube.com/shorts/hchjgssc5oo The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support…

Downloads
10,213
Likes
1,700
Rating
4.89
P
PrintablesSTRIKING FPV

V3 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…

Downloads
6,800
Likes
513
Rating
4.55
P

Nature's Helicopter - 2.5gm Maple Tree Seed Pod Quick Print

The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…

Downloads
6,599
Likes
1,829
Rating
4.66

Chinook Helicopter - No Supports - Print in Place

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Prints with no supports, slow down for best results. Rear door does not open. Also available: Original PIP Helicopter:…

Downloads
3,765
Likes
696
Rating
4.96
P
PrintablesSTRIKING FPV

V2 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter

This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…

Downloads
2,790
Likes
193
Rating
4.6
P
PrintablesSpeakingOfBrad

Pull Copter Finger Ring - Print in Place

This is a remix of agepbiz 's Pull Copter Finger Ring . No assembly required! (Although you do need to remove some support material.) I merged the ring and frame parts together, removed the no-longer-necessary screw holes, and changed…

Downloads
2,669
Likes
298
Rating
4.61
P
Printablesriaanjvr3d

Airwolf Bell 222A model helicopter

Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…

Downloads
2,623
Likes
321
Rating
4.29
P
PrintablesAnachronist

Way over-engineered pullcopter v3

Update: See Pullcopter V4 on Thingiverse , currently entered into a contest there. I thought it would be fun to design a pullcopter toy with over-engineered features, that is, interesting improvements that aren't necessary for the…

Downloads
2,239
Likes
620
Rating
5
P
PrintablesJurriaan

Improved 3D Pull Copter Finger Ring - M3 screw version

Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…

Downloads
2,206
Likes
355
Rating
4.87
P
Printablescwlewis11

Helicopter Benchy

Benchy as a helicopter with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. Check out my other models here 👀 Check out my other Benchy remixes here 👀 Checkout my other Benchy…

Downloads
1,785
Likes
447
Rating
5
P
PrintablesWhopperPrinting

Print-In-Place Helicopter

Introducing the print-in-place helicopter! Note: This is a very challenging print! Your temperature settings have to be fine tuned as well as your flow rate, and your bridging and overhangs need to be mastered before attempting this. The…

Downloads
1,738
Likes
254
Rating
4.44
P
Printablesdrho1337

Helicopter Kit Card

Print in place helicopter kit card. Assembly required. Printsettings: 0.16mm layer height No raft No support

Downloads
1,711
Likes
350
Rating
4.33
P
PrintablesTeo_211

AH-64D Apache Helicopter Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Downloads
1,574
Likes
276
Rating
5
P
PrintablesGophergames

Helicopter seed and Launcher

Inspired by samaras/helicopter seeds, I designed a projectile and launcher. Don't expect it to shoot really far, but in my testing it usually gets 10 to 20 feet before fluttering down. Your mileage may vary, but so far, it seems very…

Downloads
1,405
Likes
511
Rating
4.5
P

Balloon helicopter

This is a remix of an original Balloon Helicopter, but without a need of straws. The wings have adjustable mechanism to enable rotation There are 2 parts: helicopter balloon connector - inserted into helicopter part How to use: Print both…

Downloads
1,357
Likes
201
Rating
4.33
P
PrintablesSTRIKING FPV

V2 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…

Downloads
1,270
Likes
97
Rating
0
P
PrintablesRT pleyer 3D
Downloads
1,228
Likes
58
Rating
0
P
Printablesshnlls

FPV Copter Kit Card - STL - 3D-Druck

Print your very own FPV Drone (kind of)! It is just a model of a FPV Drone, not really for playing. It was designed as a giveaway for Maker Faire in GermanY Printing: Layer height: < 0.2 Supports: No Brim: No First Layer Speed: <25mm/s

Downloads
1,217
Likes
140
Rating
4.71
P
Printablesuhltimate

Flying Propeller (Pull Copter) & Spinning Top (No Supports, No Assembly Required)

Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…

Downloads
1,198
Likes
117
Rating
4.25
P
Printables3DBrooklyn

Flying Helicopter Toy (OLD)

NEW VERSION HERE - https://www.thingiverse.com/thing:4090005 Print Settings Notes: Print blades with no supports and gear upward. Front and back print with supports on their sides (so that the teeth face upward). Print only with support…

Downloads
1,191
Likes
92
Rating
4.89
P
PrintablesSTRIKING FPV

V1 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter

Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…

Downloads
1,160
Likes
108
Rating
5
P
Printables3DBrooklyn

Flying Helicopter Toy (12/21/23 Update)

An ode to the cereal box whirly copter toy. This 4 piece, snap together assembly is easy to print and easy to use. Notes: Keep print orientation as is. Use supports on the cabin and bottom files. To assemble, snap cabin into bottom…

Downloads
1,134
Likes
127
Rating
4.8
P
PrintablesMM

Leonardo da Vinci Helicopter

the propeller should spin the model needs to be glued together the helicopter very realistic need to use a support

Downloads
1,102
Likes
714
Rating
4.88
P
Printablesmobiobi

Airbus H145 Helicopter

No support required, recommend 0.15mm layers or less. Maybe slide the horizontal stab all the way through the holes one sides at a time to make sure it fits. Put heavy things in the inside hidden square holes, nuts&bolts, metal, etc to…

Downloads
1,082
Likes
109
Rating
4.63
P
PrintablesRobatzen

EC135 Helicopter - Kit Card w/ printable instructions

Assembly Instructions (also available as PDF) About the EC 135 The Eurocopter EC135 (now Airbus Helicopters H135) is a twin-engine civil light utility helicopter produced by Airbus Helicopters (formerly known as Eurocopter). It is capable…

Downloads
1,056
Likes
237
Rating
4.5
P
Printablesgbombadon

Helicopter main rotor with swash plate

Helicopter rotor assembly with turning rotor blades and adjustable pitch / collective. A great model (thanks to the original designer) which, after considerable time and tinkering, is now easier to print and fit together. Printing :…

Downloads
1,048
Likes
434
Rating
5
P
PrintablesLouis

Helicopter Toy

This toy is easily printable and is articulated. He flies !! I imported it here because this way everyone can put their g codes and share their opinion :)

Downloads
1,010
Likes
138
Rating
4
P
Printablesdeagon

A2212 Brushless Qaudcopter Motor Reference Model

This is a reference model of the A2212 Brushless quadcopter motor. This model's not meant to be 3d printed but should hopefully save some people time designing other stuff. You can view/download the Fusion 360 project here...…

Downloads
1,006
Likes
27
Rating
5
P
PrintablesGered

Longer key for Pull Copter Finger Ring

2× and 3× longer copter key for better fly ;-) Remix of https://www.prusaprinters.org/cs/prints/35410-pull-copter-finger-ring Enjoy it!

Downloads
965
Likes
58
Rating
5
P
PrintablesJA:GR

Pull Copter Finger Ring - Print-in-place REMIX

Improved version that prints in-place and the ring is attached later. I recommend to sand the surface that connects to the base. I have not changed the blade from the original model. The key is also offset for easier hold.

Downloads
947
Likes
144
Rating
4.7
P
PrintablesThreeD-Michael

Rubber Band Copter

Rubber Band Copter , available as kit card and as individual parts. Easy to print and easy to assemble. No additional components required except: - a robust rubber band, - a drop of oil. How to print: Line width 0.4 mm, layer height 0.16…

Downloads
904
Likes
120
Rating
5
P
Printablesjhwblender

Hand Powered Helicopter

These Hand Helicopters are the bomb-diggity. Perfect gift for children. Print Settings Printer: Anet A8 Rafts: Yes Supports: Yes Resolution: 0.3mm Infill: 100% Notes: -- It's very important to do 100% infil for this model because of how…

Downloads
885
Likes
58
Rating
5
P
PrintablesSouky1122

Helicopter Kit Card -EC 135 (Airbus H135)

kit card of the EC 135 (Airbus H135) helicopter model. you can choose any color you want, it's up to you. the composition of the model is very simple and you can do it according to the photos. Enjoy printing and sending your creations.…

Downloads
828
Likes
201
Rating
5
P
PrintablesRui do Carmo

Slightly over engineered Pull Copter flies over 20 meters

This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…

Downloads
823
Likes
214
Rating
5
P
Printablesjharris

Balloon Helicopter

This project creates a fun toy/craft to help illustrate the forces of lift, and principles/physics of flight. To 3D print the parts it is recommended to have your Z height down fairly low. This should result in the first layer fully…

Downloads
817
Likes
115
Rating
3.67
P
PrintablesKingTut

Pull Copter

I had the idea to make this model after seeing the extremely popular Pull Copter Finger Ring by agepbiz, sadly I soon realized it contained 5 parts and needed screws so I set to work redesigning the pull copter and optimizing all aspects…

Downloads
776
Likes
115
Rating
5
P
PrintablesAron

Helicopter Kit Card

Easy to print and nice locking helicopter.

Downloads
735
Likes
190
Rating
3.75
P
Printablesnilson_fx

Toroidal Rotor for Pocket Copter

I create a Toroidal Rotor with the interface of the Pocket Copter by agepbiz. Print with .15 to .16 layer height for smooth blades. Happy printing and launching.

Downloads
713
Likes
64
Rating
4.85
P
PrintablesMehmetemin
Downloads
712
Likes
20
Rating
0
P
PrintablesTeo_211

Chinook CH-47 Helicopter Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Downloads
706
Likes
119
Rating
5
P
PrintablesGamerDaD

Minicopter - Rust

🚁 A 3D model of the Minicopter from Rust, showcasing its scrappy, survivalist design. Recreate this iconic vehicle as a physical model.

Downloads
663
Likes
36
Rating
5
P
Printables3DMakeCZ

Airbus Eurocopter EC-135T2

Model: Airbus Eurocopter EC-135T2 helicopter !!!MODEL BUDE OPRAVEN DO 30.9.2024 MOMENTÁLNĚ NA TOM PRACUJI!! !!!THE MODEL WILL BE REPAIRED BY 9/30/2024 I AM WORKING ON IT CURRENTLY!!! English: Czech: Print Settings Printer brand: Elegoo…

Downloads
632
Likes
44
Rating
5
P
PrintablesSouky1122

Helicopter Kit Card

Helicopter kit ideal as a gift. looks beautiful as a decoration. after printing, use pliers to cut out the objects and clean them up as needed. Follow the steps below to fold. Of course you can build without instructions, it's more of a…

Downloads
600
Likes
103
Rating
5
P
Printablesdewgenenny

Large propeller for Pull Copter (No Supports)

This is an even larger propeller for the Pull Copter (https://www.printables.com/model/227852-strong-flying-propeller-pull-copter-no-supports). I made it 225mm, which fits nicely on the X1C print bed without needing to remove the…

Downloads
595
Likes
46
Rating
5
P
Printablesfrank.m10

Strong Flying Propeller / Pull Copter (No Supports) - modified gear wheel & pulling rod

This is a modification of Meister Edel design “strong flying propeller / pullcopter (No Suppoerts)” which sets off already quite fast and the flying propeller goes really high. Thank you for your nice design! But … I asked myself what to…

Downloads
580
Likes
51
Rating
5
P
PrintablesSzymon Adamczyk

Mil Mi-8 Hip micro helicopter

About the Mil Mi-8 The Mil Mi-8 is a medium twin-turbine helicopter, designed in the 1960s and introduced into the Soviet Air Force in 1968. Russian production of the aircraft model still continues. In addition to its most common role as…

Downloads
578
Likes
55
Rating
5

Print-in-Place Quadcopter Toy - No Supports

Prints with no supports, if yours is fused too hard to break loose, try the extra tolerance version. 4 rotors spin, arms do not pivot. Depending on your settings, you might have to POP them loose the first time. Also available: Original…

Downloads
568
Likes
99
Rating
5
P
PrintablesIzzy0wlPrints

Maple Seed Helicopter Spinner - 1 Gram

Inspired from a real maple seed that blew on my patio one evening. Exactly the same size as the original seed. I tried different versions of the wing thickness and the more layers it got, the less it would spin requiring more height to…

Downloads
561
Likes
76
Rating
4.6
P
Printablesknmorgan

Helicopter Toy (scale fixed)

This is a remix of this helicopter toy with corrected part orientations and the scale of each part fixed. I'm still trying to figure out a sensible modification to the ripcord because it's difficult to print as-is. Every print must…

Downloads
558
Likes
55
Rating
4.8
P
Printablesmobiobi

Helicoptery Weather Vane

Managed to get this to work, which was cool. Main and tail rotor gearlinked, 1:2 ratio. Print in whatever, this one in PETG. A 608 bearing would be desirable for the pedestal, the other 4 could be 608s, but I used the printed…

Downloads
556
Likes
256
Rating
3.67
P
PrintablesTomas_tnt

Helicopter

Vlastní návrh inspirovaný dopravním prostředkem ze hry Fortnite. Printable Fortnite choppa is finally here. Print instructions Vytisknout, slepit, rotor přichytit 3mm šroubkem, nabarvit, roztočit a hrát si. Držte se přiložených obrázků…

Downloads
549
Likes
72
Rating
4.5
P
PrintablesQuicksilver

Prop guard for 5 inch CineWHOOP Quadcopter

Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…

Downloads
540
Likes
23
Rating
5
P
PrintablesDub_Whytie

Wind up Helicopter

Fits on a Prusa Mini, no supports needed, print 2 propellers and assemble as in the photo, at 90 degrees to each other and with the raised centre facing down. I used PETG for its flexability. Does not hover only slows the decent down. in…

Downloads
521
Likes
93
Rating
4
P
PrintablesLongy

Flying Propeller Helicopter for Beyblade Launcher

I had to actually redesign the adapter so it would not fall off while launching the propeller. Normally this adapter is designed to come loose and fall down when using the beyblade launcher in order for the whole beyblade to fall and…

Downloads
517
Likes
61
Rating
5
P
PrintablesEaziG
Downloads
501
Likes
67
Rating
5
P
PrintablesCreatrixBritt

Bluey's Helicopter Stump

My family loves Bluey and wanted something that wasn't made yet. This is a stump, done in the Bluey art style, sized for the official toys to fit onto for pretend play. Prints in one piece, no supports needed. I specifically thickened the…

Downloads
489
Likes
120
Rating
5
P
PrintablesBoater Man

Helicopter

You can put it on your desk or ad a stand for your wall so you can display it.

Downloads
442
Likes
22
Rating
0
P
PrintablesDeltaX_F

Bell 407 Helicopter

As promised, here is the Bell 407. A bit of a random thing, but I really like designing helicopters, and this one looked challenging. It's color-separated so you can print the windows in a different color. I hate painting stuff, so I'll…

Downloads
438
Likes
77
Rating
5
P
PrintablesLimaMike3D

Eurocopter EC135 Wallart (Airbus Helicopter H135)

Wallart of EC135 helicopter, scaled to fit MK3s bed, also included original STL (1m long)

Downloads
422
Likes
55
Rating
0
P
PrintablesTomas

Pull copter (updated, no assembly, no supports)

My version, no assembly, no supports, smaller body, prints cleaner, puller has a stop. After printing just snap off ring on bottom and good to go. Gaps for moving parts 0.2 mm 0.3 mm.

Downloads
411
Likes
40
Rating
4.5
P
PrintablesWinchuff

High performance rotors (for Pull-O-Copter)

These are optional parts for the Pull-O-Copter by Toastify. https://www.thingiverse.com/thing:2428046 (Thank you Toastify!) Parts: 3-bladed 150mm diameter propeller 5-bladed 150mm diameter propeller Blade sections: NACA 2416 @ the blade…

Downloads
395
Likes
30
Rating
5
P
PrintablesPavel

Pull Copter with grip to glue

I gifted the original version to a 6 year old boy. He had a lot of fun with it but also a hard time to get it to start. He mostly struggled with getting a good grip on the ring, as it is way to big for his hands. So I modeled a new grip.…

Downloads
394
Likes
43
Rating
4.67
P
PrintablesJacob

Chinook inspired helicopter

A helicopter model inspired by the Chinook. However, the fuselage of the helicopter is shortened due to printing on a smaller printer. The helicopter is designed to transport Hot Wheels cars. The model kits are divided into fuselage and…

Downloads
381
Likes
33
Rating
4.67
P
PrintablesSouky1122

Flying Copter - TOY

a very fun model that will keep you and your children busy for a long time. I myself had a hard time getting away from it. Very simple print. you take it out of the printer and you can fly immediately. no extra needs. IMPORTANT! after…

Downloads
377
Likes
40
Rating
5
P
PrintablesTenteLego

Spinning helicopter

After printing the model you have to join the two parts (you can add glue if you want). And to make it fly you have to turn it by joining your palms and sliding them.

Downloads
374
Likes
42
Rating
4.67

Ardupilot Tricopter Frame - Autonomous FPV Test Platform

Hi everyone! This is my 3D printed Tricopter test platform for Ardupilot FPV setup. More about this project in my video: https://youtu.be/Mi7w18WuLz8 Parts used in this project: 1x Mateksys F405-SE Flight Controller 3x Emax RS2205 2300KV…

Downloads
367
Likes
23
Rating
0
P
PrintablesLoboCNC

Desktop Whomp Copter

Joining the Whomp Rocket and Whomp Glider, this Whomp Copter adds a new twist to your cubical warfare arsenal. Use 0.4mm line width for optimal printing. Prints nicely without supports, rafts or brims. Make sure to sand off any printing…

Downloads
366
Likes
80
Rating
4.8
P
PrintablesParanoidAndroid

450 Quad-copter Prop Guard

I had one too many close calls with my quadcopter props, so I decided to design a prop guard. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Notes: Updated the design to limit the weight,…

Downloads
366
Likes
14
Rating
0
P
PrintablesJoker_G

Helicopter Mi-8, Mi24 Collective

I haven't printed this last version of the part with all the switches, yet. Please share your results if you print it. Don't forget to like and comment. This collective grip has: 3x axis 1x 4-way hat switch 4x press-buttons Print: Printed…

Downloads
362
Likes
57
Rating
5
P
PrintablesWildcat

Hand Helicopter (propeller/spinner toy)

This toy really flies out of your hands! Just give it a brisk twist and watch it rise. Printing's simple. Choose one of the five versions (solid, hollow, longer handle solid, longer handle hollow, or the variation) and print two instances…

Downloads
361
Likes
26
Rating
5
P
PrintableseBender

Mars Helicopter: Ingenuity

Ingenuity , nicknamed Ginny , is an autonomous NASA helicopter that operated on Mars from 2021 to 2024 as part of the Mars 2020 mission. Ingenuity made its first flight on 19 April 2021, demonstrating that flight is possible in the…

Downloads
359
Likes
50
Rating
5
P
PrintablesCharlieLJ18

Original Twist Copter

Aerodynamic twist copter. Powered by friction. You'll have lots of fun with this flying toy. How to fly the Twist Copter Hold the Twist Copter with the stick sandwiched between you hands and the propeller facing up. Now, rub your hands…

Downloads
353
Likes
78
Rating
5
P
Printablesaeracode

AX540 Hexacopter Frame

This is my 3D-printable hexacopter (drone) frame, designed to sit in roughly the same size niche as the old DJI Flame Wheel F550 kits, but with the ability to easily print and replace anything you break if (when!) a crash happens. If you…

Downloads
352
Likes
31
Rating
0
P
PrintablesTeo_211

AS 350 B3 Helicopter Wall Art

Wall Art Silhouette model of the AS 350 B3 helicopter. Adjustable size. I accept model suggestions or ideas you have.

Downloads
352
Likes
65
Rating
5
P
PrintablesSandude

RC helicopter blade

Blade for an RC helicopter print instructions: - check first if needed to be mirrored - straight edge on the bed - brim 2-5mm - nozzle 0.4 or smaller

Downloads
350
Likes
27
Rating
0
P
PrintablesDomasschwarz

Pull Copter Cat Toy

This Pull copter is especially designed for using inside the House to play with your cat. It is made out of 9 printed parts and a standard aluminium rail with a diameter of 16,3 mm and a height of 69 mm and a M3 Screw with 30 mm length.…

Downloads
344
Likes
102
Rating
0
P
PrintablesCustom Works

Hand Spun Helicopter Propeller

A simple print you can start having fun with only seconds after it comes off the printer, just insert the stick into the hole in the propeller, spin it counterclockwise as hard as you can, and watch it fly. Recommended to be used outside.

Downloads
337
Likes
13
Rating
5
P
PrintablesRepoholy

Set of rotors for Pull Copter Finger Ring

Set of rotors for (and compatible with) funny 3D printed toy Pull Copter Finger Ring . Basically it's two sets of remixed rotors: First set is a remix of original rotor from Pull Copter Finger Ring model from Agepbiz into two sizes…

Downloads
335
Likes
36
Rating
5
P
PrintablesLimaMike3D

Eurocopter EC135 Wallart (Large) (Airbus Helicopter H135)

Large version of my EC135 wallart , precut and scaled to fit on MK3s, also inluded is original sized file (1m long). Prints easily, glue with superglue and display (I am using poster gum to mount on the wall)

Downloads
331
Likes
62
Rating
5
P
PrintablesHoudiniholm

LEGO Airbus H175 Rescue Helicopter Wall mount

A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…

Downloads
330
Likes
22
Rating
0
P
PrintablesSTRIKING FPV

V1 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…

Downloads
328
Likes
39
Rating
0
P
PrintablesAEJ 3D printing

Flying Helicopter Toy

To fly it, put the stick in between your hands and spin it as fast as you can to the right.

Downloads
326
Likes
23
Rating
0
P
PrintablesTHop3D

Little Toy Helicopter

Small printable helicopter. The two halfes can be glued together, the window can be glued on and the rest should just fit snugly. Pootje = landing gear Body links = left body Body rechts = right body propellor = propellor raam = window

Downloads
325
Likes
38
Rating
4.75
P
Printablescwlewis11

Benchy Avatar Helicopter

Benchy as an Avatar style helicopter with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. .stl & .3mf files available. Assembly: Firstly, fit prop blades using the screws to…

Downloads
320
Likes
95
Rating
5
P
PrintablesGulfstream86

LEGO DUPLO compatible Rescue Helicopter

A simple and fun helicopter designed to be fully compatible with LEGO DUPLO bricks. Perfect for young builders who love aviation! The model snaps securely onto DUPLO studs and can be combined with other DUPLO creations for imaginative…

Downloads
313
Likes
89
Rating
5
P
PrintablesRC Ade

Helicopter Landing Pad

Two colour simple design, 120mm diameter, printed using 0.15mm layer height, Prusament Galaxy Black PETG and eSun Yellow PETG. Apply the colour change at layer 14. Enjoy!

Downloads
312
Likes
29
Rating
5