1,943 models
I like the idea of original model Cotton pad and tips holder by Deli Pistačná, but I wanted more, so I created a remix which has these features/changes: Rounded edges Hexagon redesign Symetrical design (two holders for cotton swab /…
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant
The model is not optimally adapted for 3D printing, so some experimentation will be necessary. If you like the model, I'd love to hear your feedback! You can rate it, leave a comment, share suggestions or questions, and best of all—post a…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Allows for the mounting of the large power bricks for the EcoTech Radion XR30 LED light fixtures (Meanwell GST220A36-ET AC/DC Switching Adapter). There are no straps so I wouldn't mount these hanging upside down from the underside of the…
Print approx. €7.31–€8.94 excl. taxPreliminary estimate for PETGSource material: PET
Bracket for a cotton pads Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in german):…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for PETGSource material: PET
I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for one variant
The original model is very attracting design wise, but the wall thickness looks a little bold. This remix also provides a Fusion 360 file to parameterize the height of pads, sticks, wall and bottom thickness to be customizable for the…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Christmas nativity scene house, purely just a house, it is necessary to install figurines. I will finish the figures later and then release them as a set, so watch this model. The model is stored both individually and as a whole, you can…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for PETGSource material: PET
ENG: Chainmail :5x5, 10x10 and 20x20 mesh versions. With or without plate. No support, print plates downwards. FR: Cotte de mailles : versions 5x5, 10x10 et 20x20. Avec ou sans plaque. Sans support, plaques d'impression vers le bas.
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
Smoking is bad for you, so they keep saying. I'm not getting any younger and should probably stop. Which is difficult at the best of times but even worse if you're still enjoying it. I smoke roll-ups. Problem is that if I have the tobacco…
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for PETGSource material: PET
A small hinged box to hold all of your cotton swabs, after printing hinges might be stiff so be sure to break them in. 0.2mm layer height 0.4mm nozzle Use supports
Print approx. €5.26–€6.42 excl. taxPreliminary estimate for one variant
Its a cotton swab dispenser. It dispenses cotton swabs 😊
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Symbol of the Night Court. From A Court of Thorns and Roses book series by Sarah J. Maas.
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Scale 57 x 74 x 92mm Overseas version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for foreign viewers. The main difference between the two mascots is the cloth around the neck: Japan viewers have scarves while Overseas don…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant
Because I use them to wipe the print surface. Uses 2x M3 nuts, and 4mm, 6mm M3 bolts.
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
Simple way to mount Ecotech MP60 power bricks to the walls of an aquarium stand. Secure for mounting on the walls, but because there is no strap this mount is not suitable to mount handing upside down from the ‘top/ceiling’ of an aquarium…
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for PETGSource material: PET
A combined container/holder for elliptical pads 70x90mm and cotton swabs. Designed to be easy to grab pads and swabs, fits a whole pack of pads (Norway)
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
Vaso especial para las personas con movilidad reducida en el cuello. Special glass for people with reduced mobility in the neck. Print instructions Print with PET or PLA, not use ABS. 30% infill or more.
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for PETGSource material: PET
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for PETGSource material: PET
Excited for this year's OpenSauce so I brought "Bolt" the mascot to life in both finger puppet and bobblehead form! Fan art only. Just for fun, not affiliated with OpenSauce. Just a fun model to commemorate the fun and creativity that is…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Raymarine Dragonfly 4 Pro mount that adapts the fish finder display to sit in a Scotty mount. Print in PETG, 30% infill, with supports (gives best outcome) Allows you to mount a Dragonfly 4 Fish Finder/GPS to a Scotty mount. This piece is…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for PETGSource material: PET
I used PLA, no brim (nor support).
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
This is a wall-mounted Cotton Rounds dispenser. The design was done referencing the Swisspers brand of Cotton Rounds but may work for others. Wall mount fastener holes are sized for #6 pan head screws, so any drywall anchor or wood screw…
Print approx. €12.52–€15.31 excl. taxPreliminary estimate for one variant
Un distributeur de coton qui utilise le système Tisken de Ikea n'hesitez pas à aimer et poster vos makes A cotton dispenser that uses the Tisken system from Ikea do not hesitate to like and post your makes
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for one variant
"What's up?"
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
The 2022 remake of the classic Scotland Yard is called the Sherlock Holmes Edition and is a very nice game, the updated game mechanics add a lot of fun. Unfortunately the pawns and tickets were just thrown in ziplock bags, luckily the box…
Print approx. €9.15–€11.18 excl. taxPreliminary estimate for one variant
EN: "Fairy tales from moss and ferns" inspired me to create a kit of a house where two elves (Křemílek and Vochomůrka) lived. I created the base of cottage in two versions - first version contains a slot for two AAA batteries including a…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Los Cojones de la mascota
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
A Gingerbread Cottage on a Chicken Leg? This model is a playful mash-up of two classic fairy-tale motifs: the witch’s cottage that stands on a chicken leg, and the witch’s gingerbread cottage. The first comes from Slavic…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
A stylish and practical holder for reusable cotton pads, designed with built-in slots for 5x5x5mm square magnets. The magnetic feature allows secure attachment to metal surfaces, keeping your pads organized and easily accessible. Perfect…
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant
This magnetic drying mount is designed to hold reusable cotton pads while they dry. It features built-in slots for 5x5x5mm square magnets, allowing easy attachment to metal surfaces like bathroom radiators or other convenient spots.…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
This helmet was orignally made by me for FRC Team 6996's Koala Mascot that we have on the side of our robot. The ziptie slot fits a ziptie of 4.7mm wide and 1.2mm thick, it will fit most ziptie slots, and there is a spot for the ziptie…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
support boite de coton tiges, lors de la création du support l'emballage de tiges était en carton mes le conditionnement actuel marche sans problème. Prévu pour être accrocher au cadre du miroir. Peut également être coller selon votre…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for PETGSource material: PET
My Cecotec Conga Rockstar 1500 Ray Pure came with a furniture brush and a crevice tool, and that's it. This adapter goes between its hand-tool fitting and a standard 32 mm accessory kit, so you can use a proper soft dusting brush. Both…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Simple holder for Cotton pads and tips I also made Makeup brushes and sponge container in similar style
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
This sleek yet simple Dispenser keeps your Cotton-Swab's clean and ready for use. Rather simplistic on the outside, the internal geometry provides proper swap-feeding. Please keep in mind, that the swabs have to be pushed down a little by…
This planter was inspired by an instagram post by pimnynkeprint , where they had designed a planter to look like a classic terracotta planter. I thought that was such a cool idea, and a very classic look, but I wanted to put my own spin…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Build your own IoT NeoPixel lamp inspired by EPCOT Spaceship Earth! Use a QT Py ESP32 PICO, NeoPixel BFF Driver and WLED to make amazing lighting effects! Designed by Noe Ruiz for Adafruit Industries Learn Guide…
Beautiful designer organizer for cotton pads and sticks.
The Cotton War – Organizer for Cotton Pads and Q-tips Print settings (no multicolor needed) : Nozzle: 0.4mm Layer height : 0.2mm with adaptavive layer height Infill : 5% grid Wall loops: 2 Supports: Tree (auto) only needed for characters…
Progettato pensando alla risoluzione dei problemi, Phil ha diverse funzionalità specifiche per mettere alla prova la tua stampante. Queste caratteristiche includono: piccoli dettagli inseriti, piccoli dettagli in rilievo, sporgenze,…
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
An elegant smoothly rounded small box for cotton swabs, e.g. for travel, in multiple sizes. Shown is the 35mm version, it holds ~20 swabs (22 in the image). The 20mm version has a quite small lid that is a bit difficult to grip and open.…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…
Here is the Astroworld head, double-sided! I printed this head both times using “everywhere” supports in PrusaSlicer. It was very difficult to remove the support material without damaging the pieces of Travis's hair, so I recommend…
Declutter your vanity and elevate your daily routine. Say goodbye to messy plastic bags and scattered bathroom essentials. This sleek, dual-function organizer is designed to keep your cotton rounds and cotton swabs (Q-tips) neatly…
i printed it with 4 walls and 20% infill, so i got some heft to it. This design is for personal use only. For commercial licenses, visit: 👉 https://thangs.com/designer/LeHa%20Design
the cotton pad and tips holder
Travel case for cotton fioc / Q-Tips
Step into a storybook with this enchanting Whimsical Fairy Cottage ! Perfectly detailed with curling vines, layered shingles, arched windows, and a heart-carved door, this model brings charm and fantasy wherever you place it. Whether…
Step into a fairytale with this enchanting Leaf-Top Fairy Cottage! This model features a beautifully sculpted house with layered leaf roofing, arched windows, a rounded door, and leafy accents around the base. Whether you're building a…
A detailed two-color 3D printed ornament perfect for Christmas tree decoration. Easy to print, supports not required. Great as a holiday gift, home decor, or a small seasonal present. Includes a clean, high-quality model with a hanging…
Easy to print Rubber band toothpick bow You can use any toothpicks up to 2.7mm diameter (The barrel hole is 2.8mm). Recommended rubber band dimensions = (1.5mm thick - 50mm diameter). Even larger or smaller rubber band works. There's 4…
I’m thrilled to introduce my self-developed organizer, specifically designed for cotton pads and cotton swabs. But that’s not all! This versatile organizer is also perfect for storing various cosmetic items. Crafted with a keen eye for…
Tired of using the disposable can you purchase you Nicotine or tobacco products in? Want to use something more permanent and stylish, look no further!! This design has a compartment for fresh Pouches and a small compartment for used ones.…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Big dispenser for cotton swabs, easy to print without…
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
This is my first Ulvheim building remix. Print it supportless! Discover my Ulvheim Remixes here: Cottage: https://www.printables.com/model/158303-ulvheim-cottage Noble House: https://www.printables.com/model/158301-ulvheim-noble-house…
A slightly rounded small box with some ripple wave pattern (with some Zen garden vibes) for cotton swabs, e.g. for travel, in multiple sizes. Shown is the 30mm version, it holds ~16 swabs (19 in the image). This model comes in several…
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
A simple render of the Claude Code mascot, Clawd. If you print clawd.stl, you can change the color of the eyes with a simple filament change; otherwise clawd_singlecolor.stl has the eyes embossed.
Just a helpful and simple stand for Q-Tips and Cotton-Pads. Printed it in Geeetech Lightblue Silk
Christmas village houses for tea lights. I modified the beautiful designs by bennyb0914 and yeg3d to have cut out windows and doors. This works better when printing with darker filaments or opaque ones such as Wood PLA which I tried. Fits…
Here I have recreated Spaceship Earth. It consists of a geodesic sphere consisting of 980 polygons subdivided into 3 triangles each, with the center point pushed outwards slightly, perched atop 3 legs and a center base. I have provided…
LED tealight cover in the shape of a Fairy Tale Cottage I made two models, Square and Rounded, hopefully you'll like at least one of them. Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. My…
- What’s Ramiel? - Our sacred mountain. It’s the symbol of the Night Court. The Blood Rite always takes place when Arktos, Carynth, and Oristes, our three holy stars, shine above it for one week a year. On the final day of the Rite,…
Traditional Czech cottage for train models. For HO scale print at 11,49%. the front plank detail is only printable on the SL1 at this scale. Print instructions For HO scale print on the SL1 and scale the model to 11.49%.
Travis model was taken from the game and processed to be printable in Blender. For the VBuck base I used Olo Deepdelver's model → https://www.printables.com/model/192508-fortnite-vbuck-3-color-remix-no-mmu ←
Wife needed this as a planter so I hollowed it out.
Rod holder base/dock. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: .200 is what I used. Infill: 65% is what I used. Notes: I only used supports for the square locking lug inside the shaft…
My Wife's students, somehow, tend to lose the spools from her tape dispenser. I designed this replacement for her. Model is hollow and really only needs supports on the posts.
Fully printable without supports! I chose to use a brim for my prints, but it is not strictly necessary. Mine used 10% infill in a Gyroid pattern in PLA+ at 0.1mm layer height, scaled so it is 100mm tall (around 4 inches) and 2 walls /…
Fits iPhone 13 with case and supports lightning cable charger.
Model Description Simple and modern dual organizer for bathroom use. Designed to keep cotton pads and cotton swabs neatly stored in one compact piece. The fluted texture adds a clean and stylish look. Features: Cotton Pad Dispenser Front…
"A Simple 3D Printed Scotch Yoke Mechanism" is a model I designed for a mechanisms class. The motor used in this model is an N20 60RPM 6VDC gear motor powered by a 3VDC battery pack, thus the motor runs at approximately 30RPM. With the…
Dos modelos, uno de una adorable figurilla de un tigre, la otra dispone de una anilla para utilizarlo como llavero. Excelente para regalar. Muy adorable.
A simple and elegant cotton pad holder/dispenser - wife approved :-)
Fastener for lid raiser made by Tony F for the Creality K1 Max printer.
Here is the model for my Christmas Cottage. a fun little cottage for your Christmas decorations. the inside is hollowed out and the windows cut out, there are some holes on the side and hooks around the walls to allow some micro LED…
Step into the magic of the forest with this charming Mushroom Stump Cottage ! Perfect for fairy gardens, tabletop adventures, or cozy shelf decor, this model captures the whimsy of woodland fantasy in every curve and detail. Some…
No supports. Inner diameter of the circles: 60mm. Height of the left section: 80mm. Height of the right section: 60mm.
This handy small box fits two weeks' worth of your cotton swab needs. It is an elegant design with easy opening and a satisfying click to keep your trinkets secure during travel. It prints easily without supports. Use two different…
This is another remix of the pro-Trump trailer hitch cover by someusernamehere that keeps getting removed. I wasn't a fan of the message but I really like the design, so I decided to remix it into something that makes a better statement.…
This mask provides a valve for inhalation and exhalation that allows you not to accumulate moisture in the mask . I designed 2 mask sizes Adult/male and child/female. For printing, you will need Flex plastics, the best fit is TPU You can…
This is a tape dispenser for the Gridfinity modular storage system. It is compact at 1x2 squares, and features cutting teeth that split tape effortlessly. It is not possible to stack other blocks on top. This takes standard 2 inch tape…
Bring a touch of magic to your shelf or garden with this enchanting Fantasy Lighthouse Cottage ! Combining the charm of a stone cottage with the whimsical flair of a fairy tale lighthouse, this highly detailed model is perfect for fans of…
🧚♀ Copperstep Fairy Cottage – Whimsical Tower of Wonder Step into a magical realm with the Copperstep Fairy Cottage – a detailed and charming miniature home perfect for fairies, fantasy lovers, and tabletop adventures! Many supports are…
Parametric funnel to easy filling your EPSON EcoTank printer with alternative inks.. v5 is more durable version. next version on cults3d
Bring a touch of enchantment to your desktop, garden, or diorama with this charming Pumpkin Fairy Cottage model. Perfect for hobbyists, tabletop gamers, and fairy-tale lovers, this delightful design combines organic curves and playful…
Here is my take on a design for a Zyn/Nicotine pouch container. Simple, yet elegant. This design includes a built-in divider for used pouch disposal or keeping a second flavor. Textured ridges around the can/lid provide a nice feel in the…
This is a box for cotton swabs. At least the ones that can be purchased in most parts of the EU and Germany. It fits cotton swabs up to 8.6 cm in length. The cotton swabs I tested were 7.6 cm long (German once). It has a screw cap and is…
Dimensions: Around 8.5 cm tall, 6.4 cm wide and 9.8 cm in length. Objective: I decided to do something useful for myself and create an organizer for cotton pads and swabs for my bathroom, so it's easier to take them out when you need to…
