LaskaKit CP2102 USB - UART case
LaskaKit CP2102 programmer case. G-code and 3mf files are made with manual color swap in mind.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 22
- Likes
- 3
- Rating
- 0
51 models
LaskaKit CP2102 programmer case. G-code and 3mf files are made with manual color swap in mind.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
English version follows. Stavebnice modulární pažby pro vzduchovky Artemis (SPA/SMK) CP-2 a CP-1 (též Diana Chaser, Bandit). Oproti originálu nabízí (subjektivně) lepší ergonomii, nastavitelnou a vyměnitelnou pistolovou rukojeť, lícnici a…
Structure et crosse pour un pistolet Artemis CP2 / Diana chaser
This is a stock for an Artemis CP2 airgun. Use M5 screws, and 3d printer threaded rods T8 / 2 for the big ones. T8/2 are 5 cm , except the bottom one 10 cm For the wheels, there's 2 types (you choose) : you can print the threads, or…
A target pistol grip for the SMK CP1/CP2 air pistol. It JUST fits on the bed of my Prusa Mini, although it did take me a few attempts to position it just right in the slicer so as not to get a toolpath error. Both parts can fit on the bed…
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
Gridfinity 2x2 Slim Clipper Lighter Stand (20 lighters)- Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download
I highly recommend the original model, if the grip angle is too high, try this! Printed in Pla, 0.2 layers, oriented as you like, i got best results when the “barrel” part was pointig up. “Support part” not included, the one from original…
Looking at another ESP32 holder available here, I was thrilled, but then sad when it didnt fit my ESP32. So I made this up instead. My Model is a KeeYees ESP32 Devboard (ESP-WROOM-32 Chip CP2102) Fits like a glove, with a tad bit of room…
MCP2515 serves as a practical communication protocol for many industrial and automotive applications. Not only that, but it also offers other features, including TJA1050 high-speed IC and MCP 2515 IC integration. You can even allow this…
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
3D Printed Enclosure for CP2112 Module Description: A two-part enclosure designed to securely house the CP2112 HID USB to SMBus/I2C master bridge module. The design includes precise cutouts for the USB connector, pin headers. Material:…
Here are several designs for the USB to UART boards I had lying around. They are pretty quick to print using 0.2 layer, and can be closed with a bit of glue. There are also convenient slots to see the PCB pinout silk screen. Category:…
this is a 3d-printable model of a case for the mcp2515 CAN bus shield/module. there are stl & step files for download. The CAN Bus shield can be found here: https://www.az-delivery.de/products/mcp2515-can-bus-modul
I've created this model to install CAN transreceiver to BTT SKR Pico v1.0 which can support CANBUS connection with firmware mods. Meant to use in Voron V0.1 build. BOM: 4x M2x10 self-tapping screws 3M double-sided tape - the same used in…
PLA 0.2 mm layer height 20 % infill Place the PCB between the two parts so that the pins are covered and the board lies on top of the support pillars. Glue the two parts with super glue. If the board slides inside the two parts. Pull on…
Silencer adapter for marui LCP2. Thread M11x1. I printed it from ASA.
Both parts should snap together. I printed mine on 0.2 mm layer height with 0.4 nozzle on Bambulab A1. No supports needed.
Update 2/4/23 - Added a variation with a rounded end and flat top. It should be printed upside down, and eliminates the sharp edge at the bottom that could cause irritation during use. I measured the important bits and then made two…
Sound moderator. The mounting thread is m10x1mm. Exclusively for 4.5mm (.177) caliber Through holes of 6 mm You can use a 6.5-7mm drill bit and use it with a 5.5mm (.22) caliber. Warning Use the moderator only on CO2. Be extremely careful…
Pistol holster for airsoft tokyo marui lcp2. Fits with a 23mm silencer. Maybe it also fits the original ruger lcp2, but haven't tried it. you will need: - nail 1.5x25mm - spring from a pen - M6 screw and nut for fixing the clip The clip…
Especially for those who did not have a 3.5mm bypass sleeve included. Printed from PLA; PetG; PA; PA-CF. All these materials have withstood the pressure of CO2. !Warning! Attention, I do not recommend using it in PCP.
I didn't feel comfortable having the circuitry of this little thing out in the open, so I designed a compact, protective, and practical case for it! Features Allows you to easily read the PCB header names Allows you to see the RX, TX, and…
Disclamer. Work in progress. Replacment for stock grip plug.
So this is a Case for the Arduino UNO and derivates thereof. You can snap on the Lid. At good printing quality it fits very good. You also get .step files if you want to make changes by yourself. Feel free to be creative. Additionally you…
Slip case for MCP23017 16 Bit Port Expander M3 screw holes go all way through for mounting or optional model with lugs for screwing to surfaces. Print Settings Printer: Tronxy X5SA Rafts: No Supports: No Resolution: 200 Category:…
This is a remix of the Raspberry Pi 3 (B+) / 4 sleeve case designed to accommodate a CP-2102 USB to TTL breakout board , offering a small & compact way to fit into a single case. While I created this model to house a Viessmann Optolink…
Platzsparende Plattform für eine Weller WECP 20 Lötstation und ein Lötwollehalter. Mat.: Petg Layer 0,2 wall 3 infill 25% Top 5
Enclosure for the CP2102 USB 2.0 to TTL UART Module 5Pin Serial Converter. Print in PETG without supports, 0.2mm layer height, 20% infill... or, you know, whatever works for you.
Mounts that allow CP2102 to micro usb PCB to be screwed into enclosure. Three variants with different mount points (2mm holes) locations. All require usb micro connector to sit in some enclosure hole to be kept stable. Print Settings…
GIMX enables to cross use peripherals with many of gaming platforms. You'll need a dongle like this (atmega32u4) and the computer (Rasberry PI3, PC, ...) with the GIMX SW. More info: gimx.fr Category: Games
M3 heatset inserts used with M3 countersunk bolt for securing.
Case for arduino uno mcp23017. Use it to plug a logitech g27 shifter into a simucube 1. Tutorial here : https://www.racingfr.net/wbb/index.php?thread/5834-diy-tuto-shifter-g27-sur-simucube-1/&postID=351561#post351561 Category: Video Games
Battery Wall Mount for Sealey CP20V Range Batteries 2 Variations - Stick On or Screw On Tested on Battery Part Numbers : CP20VBP2, CP20VBP4, CP20VBP6 Sturdy Chunky design Batteries are a good snug fit, and held in place just with…
This is a remix of MrFlippant 2 finger Trigger, just 2mm shorter
Paleta lista para imprimir. Incluye clavos para dar la simulación donde van estos clavos. También si tienes una impresora con AMS podrás darle variación de color entre la madera y los clavos.
Adapted the USB hole for a better fitting, dimension reduced to make it compact. Is adapted for my board antenna plug, maybe you have to make some adjustments due the antennas are not soldered equal. A remix…
This riser adds 7° of tilt bringing the total angle to 17°. What you need is: 2 #8-32 ½" screws 1 #8-32 Nut (I used a nylon locking nut) 1 #8 Washer 1 Mini Glue Stick (5/16") for anti-slip First embed the glue stick. Cut it to length,…
Since Virpil apparently does not make the detent plate in the CP2 to the same standard as their joystick cams, but apparently lasercuts it without finishing the surface, the original plate is relatively rough and does not quite give quite…
I have constructed a housing here so that the power terminals are covered and the cables are strain relieved. Material: 4x M3 screws 4x M3 threaded inserts 2x Steel pin 3x14mm CAD Model…
EQ direct USB adapter for Sky-Watcher EQ6 Pro, HEQ5 and similar mount. Wiring diagram and PCB on EasyEDA BOM CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter or CH340G USB TTL Converter Adapter STC Brush Module RJ45 PCB socket…
I have created a housing for my CC2530 - CP2102 Zigbee2MQTT Coordinator. The case does not need any screws. Just press the two parts together. Wiring: CP2102 - CC2530 GND - GND 3.3V - VCC RX - P03 TX - P02 Print instructions Category:…
This is an Aero Pod for the CP215KOA frame. I designed and test-printed it for use on my unibody CP215, but it should also fit the version with separate arms. The pod is designed to fit the following hardware: HS1177 FPV camera with a…
Made for this model: https://s.click.aliexpress.com/e/_c3Zf3Ydp This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
cp2077 logo, text is too small, you may have to increase the scale depending on your printing capabilities. Category: Video Games
A Mount for the Supermicro CSE-PTJBOD-CB2 control board for all your custom homelab jbod building needs. There is two version. The M3 Tap version for those who want to self-tap threads with hardware directly into the plastic. The heat…
Made for this model: https://s.click.aliexpress.com/e/_c40huFmP This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
This riser adds 7° of tilt bringing the total angle to 17°. What you need is: 2 #8-32 ½" screws 1 #8-32 Nut (I used a nylon locking nut) 1 #8 Washer 1 Mini Glue Stick (5/16") for anti-slip First embed the glue stick. Cut it to length,…
Since Virpil apparently does not make the detent plate in the CP2 to the same standard as their joystick cams, but apparently lasercuts it without finishing the surface, the original plate is relatively rough and does not quite give quite…