424 models
This is a simple Intel CPU holder for people like me who just want to have a processor standing on their desk. You can put the CPU from both sides inside, so that you can either see the heatspreader or the pins connecting to the socket. I…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen. Da die erste Version aus pla war und deutlich instabiler Gestaltet war habe ich sie nun…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
I designed it in a way, so it's easier to remix or to model some symbols on. The g-code is simple and prints without supports. You can modify the look of the front with the sheed you are using.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
They are finally here, CPU cases for your organization needs! Versions Included: 17XX 1851 Holder V12 20XX Holder V5 115X 1200 holder V8 AM4 Holder V11 AM5 Holder V8 Tools required: Hammer Extra Materials: 2 x 2D finishing nail 1" (25mm),…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
This is my design of the T-800 CPU as seen on the Terminator 2 (extended edition) movie, specifically the scene where they decide to re-programme the T-800. If you like this design, please give it a like and follow my Instagram page to…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
I printed it with a 0.2mm layer height. The cutouts on the corners of the bottom piece are to grab the CPU: Tested with my Ryzen 7 1700. Moddeled with the help of this Ryzen CPU model: https://grabcad.com/library/amd-ryzen-cpu-2
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
This is a simple print-in-place protective case for Intel 12th-14th Gen CPUs (LGA 1700). Print instructions Rafts: No Supports: No Layer Height: 0.2mm or 0.3mm Infill: 15-20% 3 perimeters 3 tops 3 bottoms Filament: Anything should be fine!
I printed it with 0.6mm nozzle and 0.3mm layer heights in PLA and it worked fine, it doesn't damage any of the pins and keeps them covered. I made this quickly so it's not perfect, but it does the job
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
The purpose of this item is to accommodate CPUs while offering a reliable enclosure for CPUs. You will maybe need to tweak some dimensions for your CPUs
I print this with PET-G at a 0.3mm layer height, works great.
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
I have combined three ideas together: air duct goes to the back ( https://www.thingiverse.com/thing:3991193 ) reduce the noise with shock of the air waves in the inner fins (rungs) round holes ( https://www.thingiverse.com/thing:4251317 )…
Remixed an older design from Discobanan since the original had a lot of friction for me. Safely store your precious Xeons (and Desktop CPUs)! Best printed as the STLs are already orientated.
A Terminator T-800 CPU Stand as it is seen in the movie at Cyberdyne Systems. I modelled it for friend which completed the print, just print the side parts twice, some kind of metal (like a cut knitting needle etc) is needed to hold the…
There are a lot of CPU chips to print but none of the 'broken' ones were quite good enough for my project of displaying it under a glass dome much like the terminator arm. This is my take on the broken CPU chip as movie accurate as I…
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
Update 24.07.2023: As per request, I have added Socket 5-7-370-462 + 478.stl Original description: I find the original design awesome, but unfortunately only 2 types of trays were provided for printers with smaller beds. I took the shell…
Cooler used: https://a.co/d/gyw5dgC In my testing I went from 92c max to 72c max. Use the intel brackets (longer ones) to mount to the 3d Printed adapter. M4 nut and bolts for mounting.
I harvested Intel core 2 duo and I decided to make a stand for it.
A replacement CPU and GPU bracket, made in Fusion 360. This holds the CPU and GPU in place. Does not include the pegs or arms V2 updated mount hole sizes to accept original mounting pegs
Overview: I made this to store my old Intel desktop CPUs after a model I found didn't have quite enough space for the small “nubs” on the back of some of them. This model uses a more open design that allows for some variation in…
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
A small case for storing or transporting AMD AM4 CPUs.
Simple case for AMD processors with AM5 socket.
I needed to ship a CPU to my friend and he didn't want me to send just wrapped in bubble wrap. It fits nicely and is reusable. The hinge uses a piece of 1.75 mm filament. Print Settings Printer: Voron 2.4 Rafts: Doesn't Matter Supports:…
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
Holder for 16 Intel CPU with width of 37.5 mm. Compatible with sockets: 775, 115X, 1200 1700
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
Stackable trays / holders. One designed for socket 7 CPUs, so compatible with socket 5/370/A also, other intended for 486 processors. Can be comfortably hold, see photos. Fits smaller beds, with dimensions 157,4x157,4mm it can be printed…
Showcase your CPU on your desk. Display either the Heatspreader or the Pins/Pads. The AM4 Stand works for CPUs of Sockets AM2 and later as the Dimensions have not really changed. The Intel Stand should work for all LGA Models as the CPU…
3D Printed Motherboard Stand: Introducing My latest addition a meticulously designed motherboard (MB) stand, perfect for CPU miners Or open PC frame. This stand isn't just a functional piece; it's a testament to thoughtful design and…
I remixed the original lid from thing: https://www.thingiverse.com/thing:5232760 So I can storage CPUs sorted by brand at work. FOR AMD BOX I PRINTED AT 105% SCALE, OTHERWISE CPUS WON´T FIT All credit goes to original model. Hope it´s…
My PSU only came with PCI-E power cables that had dual 6+2 pin connectors. To adhere to warranty coverage for the PSU, I hooked up my GPU via two individual PCI-E Power cables to each 8 pin socket on the GPU rather than just using one…
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
Easy to print shroud for NH-L12s to improve exhausting hot air OUT of the case. Print in ABS/ASA or other heat resistant material. Requires spacer under power supply cable in order to fit, for example THIS (tested). 2025/02/14 - I've…
This will only work on Dan A4 SFX V4 or newer as it requires the threaded holes on the side to be mounted, along with the pins and clips. I needed more clearance for a larger cooler than it fits in this case (Thermalright AXP 100 full…
Liteweight remixed version with zero gap between radiator and fan body, 25mm fans support in 3 slot mode, precise strong mount, support Corsair Venegance memory sticks and similar height even with shift brackets for AM5
Remixed fan adapter to reduce plastic usage and smooth out the circumferences. Category: Computer
I accidentally threw my AM3 brackets away so printed this as a replacement. I used a PETG version to attach an Aerocool Core Plus to an M4A88T-M/USB3 motherboard and it worked well. Also, crank up your infill/perimeters/shells to give it…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Needed parts: M8 bolt M8 nut 1 cent (euro cent) coin. Printing advises: 100% infill on both parts, at least on part 2. 200 microns is enough, but it is better to print in 100-150. working even with PLA you can use lubricant on the rail…
You will need to print two of these to mount the cooler. This uses the hardware that is included with the kit. All you will need to do is secure the clips to the print. The cooler used can be found on amazon here Pick the cooler that…
CPU puzzle box modeled from the metal cpu puzzle made by Puzzle Master Goal is to insert all eight pegs into the block but require the right order. The tolerances are pretty tight and recommend finer print quality and some sanding where…
I bought this USB stick, and removed the housing. https://www.amazon.de/Intenso-Rainbow-Line-USB-Stick-gr%C3%BCn/dp/B001G4QKCG/ref=pd\_bxgy\_147\_img\_2?\_encoding=UTF8&refRID=36XD54J2JGZGBRWSQPQZ&th=1 In my case everything fits together…
Prop replica of a Neural Net CPU from Terminator. It was quite a quick print and easy to paint afterwards. Print instructions Category: Props Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: .2…
This is a CPU cooler mount for the BC250 board. It takes AM4/AM5 brackets. There are 7 variants to choose from, depending on the height of the washers that are supplied with your cooler : from 6.5 to the original 9mm, from which I started…
This model is able to convert old CPU coolers (in my case a lga 775 cooler)that have holes that are 38mm apart from each other. It will make old coolers useful again. Screws required are m3.
LGA 775 sized case for showcase purpouses. Print both parts at 100 percent size. Support is not needed, infill is 15 percent on mine, but it doesn't really matter. The lid is held on by friction alone. The one on the photo is an older…
AMD AM4 CPU case using 4 M3 screw (2.5'' inch ssd screw)
An adapter to use a Noctua 60mm fan on a CPU cooler that only accepts 50mm fans. Specifically designed for home lab server from Supermicro - SYS-5028D-TN4T. Should fit almost any cooler for the FCBGA 1667 socket (Intel® Xeon® processor…
Combined the three models to make this, made the model slightly thicker as well to reinforce the nodes because they kept snapping off easily on the one side where it didn't print as a single layer also made it so its possible to add a…
I needed an exact model and couldn't find one so I made this in Onshape
This simple mod will allow you to install two thin 92 mm fans without additional fasteners with standard fasteners that often come with them. The bracket is installed in the upper and lower bars in the spacer. To do this, they must be…
Its a holder for AMD AM5 CPUs. I tested it with an AMD Ryzen 5 7600. There also is a blank Fusion360 file, in case you want to adjust the sled for your needs. If you want do make the sled yourself, its 50x50x7mm with a 75° dovetail on the…
This is a tray for Intel Xeon CPUs of Ivy Bridge & Sandy Bridge (Xeon E5-26xx and their v2/v3/v4 variants), and some Haswell & Broadwell. It may fit other CPU models too! Check your CPU dimensions: if it's 45x53 - it will fit! UPDATE:…
Updated 12-4-24 ( v2 - Thicker combs ) Should fit most if not all AIO cooler hoses. Print Settings Printer: Ender 3 v2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 100% Filament: 3d Solutech PLA+ WHITE Notes: NOTE : Looking…
1:1 scale CPU 100% infill recommended no support material ( unless you want to add the 1331 pins on the under side ;P ) bar code, serial, etc. are genuine and a pain in the butt to create
Model of a fan duct/shroud/intake for the Thermalright AXP120-X67 Low Profile CPU cooler to have it intake no warm air from inside case and instead draw cool air from side. Requires no extra parts to mount by using the holes already in…
A cover box to store Intel CPUs with the LGA 2011-3 socket.
As some of the cases for my USB-Sticks broke I decided to print me some cool T800 Terminator CPU-Chip Cases. The bottom and top part need to be clued together. I printed the case on an Elegoo Mars 2 Pro and painted it with acrylic colors.
This is a remix of https://www.thingiverse.com/thing:4057643 ( original reddit post ) I remade it with OpenSCAD to allow customization, by modifying only a couple variables. It will generate a STL with dust filter side laying down for…
I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
This is a tray for Intel Xeon CPUs of Nehalem and Westermere generations (E55xx and E56xx), as well as Ivy Bridge (E5-24xx). It may fit other CPU models too! Check your CPU dimensions: if it's 42.5x45 - it will fit!
This adapter is used to reuse the fans for the intel cpu supplied with the processor and not used due to replacement with better cooling systems (arctic noctua etc). Two versions available: inlet and outlet. Instructions: a.) check the…
Slightly modified version of another clamshell AM4 CPU case/tray.
This fan, https://www.printables.com/model/299994-xj99c-noctua-nf-a12x25-mod is probably a better all round fan unless you need more flow at higher backpressure. Recommend 0.15-0.2mm layers, any filament, probably need support. Putting…
CPU box for 6 Pentium 4/Celeron for Socket 478. One file with both pieces (top and bottom). Print separately as depicted on the screenshot. I invite for to visit my webpage with links to social profiles and other computer activities at…
It's for any 47mm height cooler with a 92mm fan, I use it specifically for the Fractal Ridge. It uses the existing fan clips, a little more force is needed to put it back in because of the 1mm extra height. Dimensions: 92x25x92mm I use it…
Gridfinity Inserts for Intel Xeon (Scalable) CPUs with Sockets 2011, 2011-3 and 3647
Modeled in two parts, which slide over top of one another and lock into place to hold the processor securely within. This particular tray (I am making a series of these for the older processors in my collection) is for Intel Socket LGA775…
The character CPU from the game fnaf ar special delivery great for multicolor
Designed to hold 6 LTT CPU cases https://www.printables.com/model/1191951-ltt-cpu-cases
I needed to ship a handful of Intel CPUs and I didn't have any proper way to mail them. I wasn't a fan of any of the trays I could find on here and they didn't seem to be heavy duty enough to my liking for mailing. This is a bit thicker…
Following standard gridfinity 42mm holds 14 LTT cpu cases (max i could fit in the 3x2 grid. magnets (if using) are 6x2mm and need to be press fit. holder is somewhat low so it only uses 60(ish) grams of filament at 15% infill Its my first…
Project is WIP Parts of the series: CPUs ( this , available for AMD so far) Motherboards (WIP) RAM (available for DDR3) Memory (WIP) Background Over the last couple years, I came across a number of companies offering (disassembled) tech…
Reddit post: https://www.reddit.com/r/sffpc/comments/1glr5zc/my_first_sff_builddownsizing_did_i_do_it_right/ The duct is designed for 10mm gap between the cooler and the side panel, which should be in the 4th spine configuration. After…
Print the two halves with 100% infill and at least 2-3 parameters. Use adhesive like super glue to ensure that the holder is securely attached to the Intel CPU. After the adhesive has cured you now have a CPU always by your side :)
Gridfinity - small CPU Holder Works well with Lga1151
CPU box for 6 Core 2 Duo/Core 2 Quad/Pentium/Celeron for Socket 775. One file with both pieces (top and bottom). Print separately as depicted on the screenshot. I invite for to visit my webpage with links to social profiles and other…
CPU box for Socket 7. One file with both pieces (top and bottom). Print separately. I invite for to visit my webpage with links to social profiles and other computer activities at https://k13.pl
A remix of my own puzzle model from 2022. Original puzzle is meant to be made in metal like brass and is sold by Puzzle Master. My original design was very plain and the holes were too restrictive. Changed the top of the puzzle to look…
UPDATED 1/12/2026 - Included bracket for the MSI B850 Edge TI board (uses coarse fan screws) UPDATED 1/11/2026 - STL file updated to 5.5mm offset instead of 3mm downward - Fusion file updated to have parametric adjustment for vertical and…
CPU delid tool, best to print with 100% infill M8 screw and Nut
*UPDATE* Added an internal space on the far side of the hinge to accept a 3mm x 3mm cylindrical magnet on each half of the clamshell to more securely keep it closed. To add the magnet, you must stop the print before this cavity is closed…
I designed a air cooler for my M920p that supports a 80mm fan . it does a decent job of directing airflow through the CPU cooler. there is also a cut out in the bottom to introduce some airflow through the motherboard, because I realize…
