87 models
This folding cribbage board houses a standard deck of cards and has a compartment to hold pegs. Print with 0.2mm layer height. Add color changes as needed, and add a pause to insert the magnets. Any material will do - I used PETG so it…
These include a taper that fits best with 1/8" (3.175mm) holes. Print multiple slowly with flat faces down and good cooling for best results.
I flattened an edge of MoltenLayer's Cribbage Peg for an easy print with no supports. There is a hull base and text for two colour printing using a colour change in your favourite slicer. Use Openscad to customize your name on the peg.…
This is a folding cribbage board that prints with no supports. The inner compartment is large enough to house a standard deck of cards and pegs underneath. I wanted to design a board that was compact and travelled easily. The magnets help…
I created this drilling jig to accurately drill holes in a hardwood board to make a standard 121-hole cribbage gameboard. The drill holes are sized for a ¼" bit and are chamfered to more easily locate the drill bit. I printed this with a…
This is a simple cribbage peg that I modeled in fusion 360. Print instructions I would suggest printing it on the side, no supports are needed, and use a brim.
Folding print in place travel cribbage board that fits a standard deck of cards and pegs. I designed it for my dad's birthday and figured I would share the love. Files include the .3mf and .stl of the board, set of 3 pegs, and a single…
Cribbage pegs - easily resized, recoloured and updated for any cribbage board!
Fully 3D printable cribbage board. Includes hole with screw-on cover for peg storage (fits six pegs). See below for specific printing instructions... Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes Supports: No Infill:…
Small Printer? I created this remix of @ChrisW_57231 Cribbage Board so that it could print on my Prusa Mini. Instead of a print in place design, the pieces can be printed individually and assembled using a metric bolt with a little super…
This is a two piece design that does not require any supports. The files are only for the blank version. Please post any makes or remixes to this, I have made a few cool team logos that I cannot post due to copyrights!
I designed a travel sized cribbage board for outdoor camping trips. The board comes with a slot for a deck of cards and another cubby for pegs. There is a sliding door that will keep the contents from falling out when carrying. The board…
Support me by checking out OctoEveryWere Here This is a replacement part for your lost or broken Bicycle cribbage pegs Recommended print settings: Layer height: 0.1mm Infill: Grid 15% Speed:100.0 mm/s
Folding Cribbage Board Folded Size: Length - 120.2mm (4.73") Width - 77.3mm (3.04") Thickness- 30mm (1.18") This 3D printed cribbage board is designed for those that want an easy way to take their game on the go. Compact and lightweight,…
a folding three track cribbage board with storage to a deck of bridge size cards and pegs. the peg area is a bit short. feel free to download and modify the fusion 360 file. update: I added .STL files, modified the peg compartment to make…
I was inspired by similar designs while Christmas shopping/searching for anchor shaped cribbage boards. I'm using Sneq's more detailed Octopus Stand ( https://www.thingiverse.com/thing:2402131 ) to give it that extra nautical look. (I…
A small game of Cribbage. Down and back twice for a full game. A full line is skunked. 3/8th pegs from amazon. 8x3 magnets used. Pretty tight on the magnet holes, I heat up the bed of the printer and lay it face down to let it relax a…
I love Chris W's cribbage board design. and have made a few. I had a couple issues that I decided to provide a solution to. First I found the pegs a bit small for easy handling so I designed some slightly larger ones. And second the…
Notes: No supports needed when printing Uses (18pcs) 10mm x 2mm magnets Canada Amazon - https://www.amazon.ca/Magnets-Crafts-Multi-Use-Refrigerator-Whiteboards/dp/B0CQR8P3ND/ USA Amazon -…
Cribbage name tags that can be edited using scad The bottom is not flat so you will have to make it flat by reducing the placement height of the model. Made with Openscad 2025.11.03 ----Not polished-----
I saw one similar to this somewhere, it was a good idea, this has the proper hole sized to use standard pegs since many like there own special pegs when playing, i also attached a box with a lid that is snug enough to stay on and hold 4…
Growing up, cribbage was a game of choice to pass the time. I created this with the idea of being able to take it on the go without having a big board to pack. This board allows for 3 players and is an up and down path for each. The…
This board printout in four parts. the boards and then two snap in place hinges. the board includes storage for 12 pegs and a deck of poker sized playing cards in the box hinges come tin two varieties regular and flat fold. the regular…
Cribbage board designed in Fusion 360. It's a Work in Progress (WIP) and I have not printed it yet… I still need to add a pack of cards holder/drawer and a drawer insert for the pins. The full version as included is 400mm long with 2.5 mm…
Update 2026-09-27: See my new version for multi-material printers here Folding Cribbage board for 3 players. This will fit a deck of cards in the middle. The tracks are at different heights so you can color the tracks with a simple…
A basic, simple (and admittedly not very elegant) template to define the holes in a cribbage board in OpenSCAD. Main purpose is to be overlaid on a variety of custom boards.
An oversized cribbage peg as requested by a Reddit user. Available diameters at the bottom are ¼", ⁵⁄₁₆" or ⅜" and the height is 2½". No supports needed.
Print this model using Prusa Slicer and a multihead printer such as the Original Prusa XL. Print the model top down. I added a pause in the print job to insert the magnets. I used Input Shaper with .32 structural and didn't have a problem…
The version in the photograph was printed with creality wood-fill filament which worked wonderfully and created the finish I was looking for. Happy printing :)
This is a blank slate of my cribbage board I designed. There are two pieces, a top and bottom and they are held together magnetically by embedded magnets. This was designed to be printed on a Bambu labs with AMS and to be highly…
An assortment of animal pegs for your cribbage board
I created this drilling jig to accurately drill holes, and rout out the outline in a hardwood board to make a 29 shape 121-hole cribbage gameboard. The drill holes are sized for a ¼" bit and are chamfered to more easily locate the drill…
Round cribbage board that can be customized with a round image/logo in the middle. Update: Had to make a few adjustments, should work now. Sorry to the first 3 downloads. I had issues with incomplete boolean operations during compilation.…
This Cribbage board is designed for multicolor printers. I print the base in Red. The veneer is the only multicolored print. I print it separately so that I can inspect the quality before gluing it to the base. I apply superglue along the…
Folding Cribbage board for 3 players. This will fit a deck of cards in the middle. It's just small enough to fit on a standard 200mm square bed. The tracks are at different heights so you can color the tracks with a simple material change…
This is a cribbage board in the shape of Montana! Has the right amount of peg holes and everything
Playing cribbage with three people is so much fun, but most boards usually have space for only two players. To solve this problem without having to buy another board, I designed this to be able to be played with three players. The players…
Cribbage board in the shape of Mickey's head. This will just barely fit on an ender 3 sized printer. Be sure to take extra care with bed adhesion. the holes are about the right size to fit a set of colored toothpicks, or you can print a…
Plastic backing plate that holds the cribbage pegs in place during storage and travel. This fits the most common cribbage board that they sell everywhere (I'll upload a pic). Original plate was too loose and easy to fall out during…
35x4mm pegs . Neighbor needed some for a homemade board her father had made years ago (they were using round toothpicks) but didn't want the Blue/Green/Red. She opted for Black/Grey/White. She also asked for them to be a bit taller (old…
This is a replacement part for your big cribbage pegs. Recommended print settings: Layer height: 0.1mm Infill: Grid 15% No support needed.
This is a Kraken Cribbage board holder. The tentacles are printed with bronze silk PLA, the rocks with a grey overture PLA, and the Water was a sparkly blue PLA I had laying around. I didn't make the Anchor board, but I designed this…
Three-Body Problem Themed Cribbage Board. (No Pieces)
Simple small cribbage board and peg. The board is an easy print. The peg, not so much, I finally printed it 100% infill, part cooling turned off, brim on and limited to 50mm/s to get the pegs to turn out. If I were to print a second one…
As a regular cribbage player myself, I thought this would be a fun board to make. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two…
I made a golf themed cribbage board for a friend using these router templates I designed. There's only one like it in the world (which my friend has) so here's your chance to create a (nearly) unique gift for the golfer in your life (or…
Used only the base from the trophy and reshaped/resized to fit the skunk model. Turned out really cute. My color purging was too narrow and I had some color bleeding when printing. The default values will work fine. I only bumped mine…
The Green Bay Packers version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks…
Print inside-colour with crib-pegscrib-pegs Print middle-colour with crib-pegscrib-pegs Print outside-colour with crib-pegscrib-pegs body-1 has a colour change body-2 no colour change peg-tray no colour change
The Minnesota Vikings version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks…
For the lines, I used waterslide decal paper with the attached PDF. I also added a multi-body STEP file with simplified lines for multi-color printing. These are the settings that worked for me with generic PLA on my QIDI Plus4. Crib &…
Overview : My family plays a lot of cribbage, and I’ve designed a lot of boards. I have a hockey stick prototype I made that we travel with. I designed this threaded box to store the pegs with a holder that attaches to the board and holds…
The Detroit Lions version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of…
Traditional 60 hole cribbage board. The board (in the uploaded pictures) was created using a single extruder and pausing the print to swap colours. If the Pin Cover is too shallow for your preference, its height will need to be scaled up.
Cribbage This is a cribbage board. Print Instructions I printed it in PETG because that is what I had but PLA would work much better The pegs should be printed on there side for better structural integrity. The pegs will need support if…
The UoM version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of 120 holes…
I have created several versions of this and finally got it so that it prints consistently without needing to turn off the fan. All you need to do is some sanding at the end and you will have a great replacement or new marker peice! Design…
The Chicago Bears version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of…
The MSU version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of 120 holes…
A small cribbage travel set. The space inside holds a single deck of standard Bicycle cards. Each board has 60 slots. The bottom also has a compartments for 6 tapered pegs, included in the design. The upper and lower part are connected…
Simple cribbage pegs that I made for my grandparents, I used 100% infil
This cribbage board is perfect for your favorite computer geek! Inspiration came from a friend of mine who refused to count by 5 (typical in cribbage). He would count by 2's generally. So I decided to make one for specifically for him.…
The Detroit Red Wings version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks…
I wanted to produce some unique gifts and came up with this print. It did require a fair amount of post processing. This was printed on an Ender 3 V.2 Neo (modified with a heated enclosure). Because I wanted a highly polished look it was…
Files include: The cribbage board A small segment to test settings and verify the fit of your pegs A wall hanger meant to use a 3M strip Note: The model in the image accidentally has 6 holes in the second to last segment. This has been…
I teach cribbage to my grade 3 class. It helps the students to learn basic math facts in a fun way. I designed this to be a half length game because a full game would take a long time for most of my students. I have also designed this to…
Printed two and used a hot glue gun to attach them to the wood.
This was originally created for the Photo Case . This insert is suited to fit a full deck of cards along with the additional cards required to play the ‘Chicago’ variant of Cribbage. This print works just fine with a 10% infill. Any…
A travel cribbage score track that fits in a pocket — with scoring pegs that can never fall out . Each player gets one peg riding a hidden T-channel : the peg's foot is wider than the top slot, so once it is on the track it only slides 0…
The Detroit Tigers version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of…
A compact cribbage board for two or three players. Each track snakes up the board in four passes of 30 holes, grouped in fives, finishing at the 121 hole; the three start holes per player double as peg storage. Nine pegs included: print…
New multi-material printer version of my compact foldable cribbage board Update 2026-10-08: Made the hinge portion thicker to support more reliable printing.
You'll still need the other files from the original post - I've only posted the Side B files here.
Custom cribbage peg replacement for the Drueke Club Cribbagemaster board Model 1977. There are (2) versions, (1) with a DoDecahedron Head that acts like a "lead" peg or score/skunk/etc keeping peg and (1) that is printable geometry that…
This was originally created for the Photo Case . This insert is suited to fit a full deck of cards along with the additional cards required to play the ‘Chicago’ variant of Cribbage. This print works just fine with a 10% infill. Any…
I love Chris W's cribbage board design. and have made a few. I had a couple issues that I decided to provide a solution to. First I found the pegs a bit small for easy handling so I designed some slightly larger ones. And second the…
I teach cribbage to my grade 3 class. It helps the students to learn basic math facts in a fun way. I designed this to be a half length game because a full game would take a long time for most of my students. I have also designed this to…
Cribbage name tags that can be edited using scad The bottom is not flat so you will have to make it flat by reducing the placement height of the model. Made with Openscad 2025.11.03 ----Not polished-----
This cribbage board is perfect for your favorite computer geek! Inspiration came from a friend of mine who refused to count by 5 (typical in cribbage). He would count by 2's generally. So I decided to make one for specifically for him.…
Cribbage This is a cribbage board. Print Instructions I printed it in PETG because that is what I had but PLA would work much better The pegs should be printed on there side for better structural integrity. The pegs will need support if…
35x4mm pegs . Neighbor needed some for a homemade board her father had made years ago (they were using round toothpicks) but didn't want the Blue/Green/Red. She opted for Black/Grey/White. She also asked for them to be a bit taller (old…
An ever growing list of names for cribbage pegs. If you don't see the name on this list please let me know before you buy and I'll add them! Aaron Abby Adam Aiden Albert Alex Alice Alina Allan Allen Alma Amma Amy Andrea Andrew Angela…
35x4mm pegs . Neighbor needed some for a homemade board her father had made years ago (they were using round toothpicks) but didn't want the Blue/Green/Red. She opted for Black/Grey/White. She also asked for them to be a bit taller (old…
