7,027 models
Buy a printed fidget cube from me directly: AustinMakes.etsy.com An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but…
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
Something quick, because of course I had to make an entry for the jointed figures competition! This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot. Instructions The 3MF file has all the…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Remix of “Yet Another Fidget Infinity Cube v2” by austinvojta. You'll find Minecraft Creeper faces hidden on all surfaces throughout this infinity cube. Color changes were added to highlight the faces on the top and bottom surfaces.…
Print approx. €3.73–€4.55 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube, now optimized for faster printing and minimal material usage! This version is divided into three parts, eliminating the…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
Print approx. €18.78–€22.95 excl. taxPreliminary estimate for one variant
Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
Our team of scientists have developed a new device, completely on our own mind you! specifically for weighing down those pesky buttons. The guys in the lab also whipped up a version to accompany you through your life enrichment…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
An easy to print vase mode design inspired by the famous companion cube from Portal 1 Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for PETGSource material: PET
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube , a mesmerizing blend of geometry and minimalism! With its 111 mm dimensions on all sides, this artistic sculpture adds a…
Print approx. €7.08–€8.65 excl. taxPreliminary estimate for one variant
Meet Mini Cube Buddy – your tiny 3D-printed friend ! This adorable micro figure is perfect for decorating your desk, shelf, or workspace . 🟩✨ ✅ Ultra-lightweight – weighs just 0.3 grams ✅ Super quick print – few minutes only! ✅…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Meet the Articulated Cube , a delightful blend of geometric design and playful creativity! Featuring moveable legs and charming arms, this cube-shaped…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
If the print fails, try to print a 50% speed.
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Unlike most Vortex Passthrough models where the vortex part is inserted vertically. Here the Vortex Part is inserted diagonally through the corner, making it a more challenging print. After some prototyping and many failed prints i…
Print approx. €7.96–€9.73 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Simple stand that blends in well with the real Rubik brand stands. Feel free to customize or add text to the blank spaces.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
The main idea is to manage not to make you solve the puzzle. On the sides of the cube there are small windows, from which you can glimpse the marble, but this shouldn't help you too much... if you manage to solve it one day, you will have…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Simple Cube
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is a remix . Its based on https://www.thingiverse.com/thing:757884/files. Its 50x50x50 (and not 80x80x80 as the original). I have cut a couple of milimeters on the base of the original model in order to increase the surface touching…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
🎮 Introducing the 3D Printed Wheel Holder for Simucube QR Wheels by Veracon Engineering! Elevate your sim racing experience with our precision-engineered wheel holder designed specifically for Simucube Quick Release (QR) wheels. Crafted…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Description from www.thingiverse.com/thing:5264711 After printing a bunch of simple gear cubes I decided to make something special. Yesterday I found a box with celtic ornament and combined this pattern with gears. Print time was about 14…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A simple geometrical design inspired by the amazing Matrix movies! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
Confirmed with nozzle 0.4mm and layer height 0.2mm. I recreated this 3D and model so it's easier to print and rotate. PURSA slicer's easy mode is sufficient for settings. -Update- I added a model where each side is flat. This one is…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Models and gcodes are created based on colorFabb tutorial HOW TO PRINT WITH LW-PLA (colorfabb.com) In order to calibrate LW-PLA prints you should: I. Check filament layer width in range of nozzle temperatures and pick temp with highest…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Per calcolare al meglio il flow della propria stampante o meglio del filamento Premessa questa operazione bisogna farla per ogni filamento al fine di ottenere il miglior risultato possibile 1-prendere un calibro e misurare il diametro del…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
PLEASE LEAVE A HEART WHEN YOU DOWNLOAD ;) I designed a 20mm calibration cube with clean walls because I only found ones with letters and so on here on printables. Not a special model but helpful for calibrating the printer. The gcode…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Print in the original orientation of the STL file. Enjoy printing! Prints without supports Dimensions: 32*32*32mm when collapsed. Might need a little bit of breaking in. Based on this LEGO Minecraft magma cube. I saw it and immediately…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
These are the nine ion dice (30mm cubes) that I've used for my "Ion Dice" game for learning inorganic nomenclature. The white-page activity can be found for FREE at my Teachers Pay Teacher's page linked below. The first six are for…
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for PETGSource material: PET
It's fun to play with, especially when you're bored.
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
A simple 6x6x6cm cube with a smaller inner one. Print instructions I test my printers with this model and without supports. Long edges get some imperfections, but generally it should be fine.
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
For best results, print each piece in a different color. Higher infill will create heavier parts that will passthrough each other better. Works fine at 5% as well. No Support Needed!
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
This is a Case to fix the emergency button to a Simrig. The hole distance on the back is 40mm to fix it horizontal and vertical on 40XX aluminium profiles. You will need 2x t-nut for M6 Screw 2x M6 Screw 4x M3 Bass insert 4x M3 Screw If…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
This is a hard test for your MMU. Each filament is used on each layer. Wipe into infill is turned on for each cube.
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
20x20mm 'calibration cube' style block of the orange/brown brick platform cube from Super Mario Bros etc Because small things are fun to hold and stack. Also if you printed enough of them you could make an actual platformer game for your…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This is a remix of my famous Sugar Cube Tree that fits the LED Lamp Kit from BambuLabs. Tree prints with NO INFILL. No Supports - LED Kit: https://us.store.bambulab.com/products/led-lamp-kit-001?variant=41806987395208 The tree prints with…
Print approx. €1.08–€1.31 excl. taxPreliminary estimate for one variant
Calibration Cube - Furniture knob Simply print one of the two variants (with printed M4 thread or for threaded inserts). Suitable M4 screws are required, the length of which depends on the thickness of the furniture fronts. The print file…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
The stamp cubes measure 4×4×4 cm. There are 6 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, vocabulary (create stories), and imagination. The cubes have the…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Hello, Today I have a 20x20 Calibration Cube for you. It is suitable for setting the ideal size of your print. I succeeded :-)!!! I used PLA/PETG as the material. No need to use supports If you are interested in my work, the links are…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…
Print approx. €4.50–€5.51 excl. taxPreliminary estimate for one variant
PLA is suitable for printing. A layer height of 0.2 will be enough. Use support material to print the cross-core. You need 108 4x2mm magnets for assembly. Use glue to secure the magnets inside. !!! For the correct operation of the cube,…
Print approx. €8.68–€10.61 excl. taxPreliminary estimate for one variant
I designed this box of cubes — a decorative storage container with a lid. The print requires no support and uses only a minimum of material but creates a stable box and looks great with opaque and transparent filaments. Update 2023-01-22:…
Print approx. €3.75–€4.59 excl. taxPreliminary estimate for one variant
You are welcome to decide the name of this print, I frankly don't have a clue. I recommend printing slowly for the best quality. Also, add painted supports to cradle the bottom and the ceiling of the middle of the part to avoid a print…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
This is a buildable/ foldable Attack-Defence Cube for your Magic the Gathering Card Game. It is made to show the additional or less strength of the Creatures in a Magiccard game. You can choose two Types of Printmodels. One assambles by…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Be careful when removing supports. The inner cube is fragile! Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Cube in Cube , a captivating geometric design that features two nested…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
This is basically an inverted standard calibration cube, and prints in about the same amount of time. But this one is hollow to test retraction, overhang angles, and an insanely difficult bridge at the top. The cube measures 20x20x20mm…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Elevate your space with this mesmerizing Metatron's Cube coaster! Featuring a powerful symbol of sacred geometry, it measures 100 mm in diameter and 4…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
1x1x1 Cm Cube
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Scaled up version of 10 HaloMaster343 with joints re-sized and integral supports added so it works well at this size.
Print approx. €8.35–€10.20 excl. taxPreliminary estimate for one variant
Explore the capabilities of 3D printing with the Impossible Fidget Cube ! This 30 mm cube features a sphere "trapped" inside, offering both a visually stunning and fun-to-play-with design. Available in single-color or dual-color…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
A minimalistic display stand for the CMY Cube (50mm version) tuned to let as much of the cube visible without compromising the stability. What's this "No B Surface" nonsense? When Aston Martin designed the One-77 (launched in 2009), they…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
This is an adapter plate on the motor side of the Simucube 2 Wheelbase. With this you can mount 50.8mm or 70mm wheel extensions or QR's directly to the base. 100% Infill is recomended You will need M5 Brass inserts. If the wheel extension…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Bring the power of sacred geometry to your space with this Metatron's Cube Coaster . With a thickness of 4 mm and dimensions of approximately 100 x 100…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
I took the idea from the christmas cube countdown and modeled a scene for halloween. I am not a great modeler, but I had fun with this one so I wanted to share what I had.
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Based on the concept of the well-known modular wooden marble track from Switzerland ( Cuboro ). Supplemented with own models and ideas. Here is a small example of what is possible with the blocks. Two of the models unfortunately do not…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
There are tons of models for Magic/Rubik's Cube on the net. I was interested in trying to model one that is printable with a simple one-color/material printer, can be assembled without glue or additional hardware, and still has decent…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Hello. Baby Shower Names Guessing Game Cubes allows you to keep your party guests busy during a baby shower by them trying to spell out the name of the baby before it is announced. You can always give a prize to the winner. This is fully…
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for one variant
Fidget Cube mechanical Stress Toy with Joystick Merged all parts and exported as stl for easier printing
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
This Puzzle Cube has one path from start(large rectangle) to end (smaller rectangle) that passes through 3 cones/numbers meant to unlock a 3 digit lock. The final combination starts in the large rectangle and passes through 3 numbers and…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
These cubes continuously rotate around each other, while staying parallel to the x,y axes. No hardware is required. This project is the result of my study of non circular gears. PDF download:…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Introducing the Infinite Knot Cube , a stunning representation of mathematical elegance and modern design! With its intricate interwoven structure and compact dimensions, this cube-shaped decoration measures approximately 111 mm on each…
Print approx. €5.33–€6.52 excl. taxPreliminary estimate for one variant
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
3D Cube Maze Puzzle Test your dexterity with this interactive cube maze puzzle! The goal is simple: navigate a steel ball through a network of winding internal channels from start to finish. Featuring exactly one entrance and one exit,…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
I was inspired by Matt Parker's recent video ( https://youtu.be/oTWeuyDMgwo ) on compound platonic solid, and wanted to print a 5-cube compound platonic solid myself. I unfortunately could not find a good-quality 3d model of it, and…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
Playing cubes and each has 6 numbers
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
A connector to make a cube out of straws.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
The stamp cubes measure 4×4×4 cm. There are 6 letters or numbers on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, and helps the children when they start learning to count,…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
Hello, Today I have a large 40x40x40 game cube for you. Suitable for children to play board games. Quite big but it's really easy to play with, and it's perfectly shaped. I used PLA/PETG as the material. No need to use supports!!! If you…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This is a basic base to hold a CMY Cube. The model I have here is a 50mm x 50mm, but I suspect it would work for most sizes. Tips Sliced file for example only, slice your own for best results. You can ignore the layer shift in my picture,…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
Cubes Quest Cube Quest is a dexterity-strategy game. Cubes are flicked across customizable board. Cubes that leave the board are defeated. Play alternates until someone wins by defeating the enemy king. Cubes also risk defeat in enemy…
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
Freecad Parametric Corner for angle-iron, for making enclosures, etc. Set the angle iron leg length and thickness, it calculates the rest. settings in ‘Sketch’. Updated freecad file referenced parameters properly. some constraints were…
Print approx. €2.98–€3.65 excl. taxPreliminary estimate for one variant
A quick Print to use for calibration or figure out ratios between expected and output. It SHOULD be exactly 1CM. On my printer, it came out at 9.88x10.00x10.11 A second cube is 2CM. X and Y axis are on the side of the cube that…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Simucube dash mount
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
Der Knobelwürfel ist ein einfaches beginner Puzzle. Er hat nur 3 Teile. Viel Spaß beim puzzeln. ---------------------------------------------------------------------------------------------------------------- The puzzle cube is a simple…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Info: Simple stand for Rubik's cube my son got one cube with a stand (visible on the background of some of pictures), so I modelled the same shape Print info: variants: without bottom holes: no supports needed with bottom holes supports…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
ChIPs ( Ch oon way's I nterlocking P anel s ) With only four different types of panels you can build any kind of polycube you wish. Including tables. The panels connect to each other using bumps and indents on the contact faces on the…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
This model is a compact chopstick rest designed to keep chopsticks elevated from the table surface for improved hygiene. The zigzag geometry provides stable support for two chopsticks while minimizing contact points. Optimized for easy 3D…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Multi-Material, Print in Place Rubik's Cube NOTE: as of right now, this model is non-functional. There needs to be additional clearance between the individual cubes, but adding that while also providing enough adhesion between the PETG…
Print approx. €4.31–€5.26 excl. taxPreliminary estimate for one variant
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Originally intended for a math teacher and their students as a teaching aid, but anyone can use it. You can easily and quickly draw a cube!!! I printed around 50 pieces, and the students are praising it!
Print approx. €0.27–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This cubic keyring and ball spinner is printed in place with supports. The ball rotates freely in the cube with a tolerance of 0.4 mm. If you look at the print file provided, you will see that I printed the cube with a 50% infill and the…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
This cubes consists of interlocking pieces that come together to form a stable and precise shape. The parts are designed to complement each other perfectly, seamlessly fitting together. The clever design creates a fascinating interplay of…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Description: just a simple bevelled cube where letters are not submerged inside, but are emerged. for nice surface reasons, they are printed separately and glued together :) used font is Arial black For kids: letters glued normally for…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Simple Nested Cubes, a stunning geometric sculpture crafted in a "print in place" design. With dimensions of 75x75x75 mm, this model is…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant
This is a modular system for easily mounting Rubiks Cubes on the wall to make Rubiks Cube Mosaics. Each piece dovetails together so it can be as large or small as desired, and the Rubiks Cube are easy to remove and reconfigure so the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
A six sided solid made of squares. Both a prism and a platonic solid. Credit to Ray Fox for being the first to upload a public domain cube mesh.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
A calibration cube. Tests your printers calibration.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Testcube for mk3s with mmu I also use the test for the different shrouds - you can see from the sphere how even the air distribution is
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
3D vytištěné modely krychlových těles a ořezaných krychlí představují fyzické 3D edukativní pomůcky odpovídající příslušným modelům krychlových těles a ořezaných krychlí znázorněným v úlohách, které jsou zařazeny v GeoGebra knize s názvem…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
![[Testers Wanted] Multi-Material Print in Place Rubik's Cube](https://media.printables.com/media/prints/572376/images/4578518_479a5991-9a3a-49ac-9fb3-138463d24338/rubiks_cube.png)
