308 models
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Lisca di pesce per avvolgere vari cavi. Stampato in PLA in 45 minuti riempimento al 10%
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…
As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…
Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…
The source marked this model as adult content.
Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…
NOTICE : For all future updates to this model, see VEX Scuff Controller V2 by NoozAbooz - MakerWorld . The clamshells should be printed with at least 50% infill and 1mm wall thickness to prevent them from breaking easily. The paddles are…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
This is a pair of realistic Handcuffs I designed off of a picture I found on the internet. They feature a button activated double lock. After activating the double lock turn the key in one direction to unlock the lock then the other…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
If you need specific size, comment this model, and I will upload another one for you. This model is designed for 0.3mm layer height. Place supports like this for printing.
These cuffs have functioning chains that connect them and the entire print can be printed in place so that nothing needs to be assembled. Depending on printer accuracy, you may need to move the chains around after printing to get the…
The simple ear cuff prints fine, the “V” shaped one is better printed at slower speed.
The original by Bababbak is a lovely design and does what it needs too with allot of practical simplicity. But the authors own recommendation was to print a remix with a metal spring. I've always been a bit of a purest in finding ways to…
Preface I bought a Shop-Vac and Cyclone Dust separator a while ago; The Vacuum came with a 40mm hose, which is just not the best choice for a semi-static dust collector installation. I ordered a 60mm hose and had to solve the problem of…
DOWNLOAD CAMLOCK and find more accessories HERE. This part will adapt a 40mm vacuum wand to the new CAMLOCK end. It should be a slightly loose fit depending on the taper of your vacuum. I use PFTE plumbers tape to ensure a perfect fit,…
The source marked this model as adult content.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Saw Oakblooms and it reminded me of another handcuff key I saw once. Took his added a ring and made it smaller so it could fit in a Fifth Pocket or hidden somewhere else. I'm going to try and make some more variations of this. Please if…
This is a easily printable model that is well functioning and lots of fun. If your key breaks or gets lost you can make another or, if in need of a faster solution, use something like a bent paper clip to push the lever inside of the…
Cuff with print in place hinge and locking mechanism.
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Toy handcuffs with key and keyless operation. The parts can be printed in different colors to match your favorite super hero. In the example photo, the lower half of the build plate was printed separately in a different colour. Sized to…
please give a like if you download. thank you.
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Not my model, from jason955 on thingiverse. Uses the following screws: 1x M3 x 8mm 2x M2 x 12mm
Estilo sin Compromisos: Añade un toque de estilo a tu look diario sin la necesidad de perforar tu oreja. El "Ear Cuff" se coloca fácilmente para un look audaz y moderno. Versatilidad en Colores: Su diseño compacto permite usar varios "Ear…
This model is compatible with the lego system.
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
Coded from scratch (but still referenced the original) the pin creation from https://www.thingiverse.com/thing:528239. There are two things this customizer does: It makes round heads for the lock pins instead of the square ones in the…
I lost the keys to these toy handcuffs years ago. I don't actually need them anymore but if someone else gets them in the future, I wanted to be able to give them away with keys. I designed them to look similar to the old ones (from what…
Lost Your Handcuff Key? Quick Fix Available! So, I dropped my handcuff key behind the bed and couldn’t retrieve it—totally vanished. Instead of buying a new set (which felt like a waste), I designed and 3D printed my own key. It works…
Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…
Esposas para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
A very simple design for zip tie handcuffs. There are a couple out on other sites but I have different zip ties so this one is a bit more of a tighter fit. I just used some “Hyper Tough” 18-inch cable ties from Walmart
What is this? This is a 3d printed addition for the VEX V5 controllers that allows for drivers to have better control over their robots during a match by allowing them to press buttons on the top of the controller through durable levers…
This is a replacement 1-1/4" (roughly 32mm) hose cuff for a Milwaukee Packout Vacuum hose. It's left hand threaded and threads right onto the hose. It should thread just fine on any vacuum hose that's 1.5" (38 mm) OD. More importantly...…
Version updated! Now it´s version 1.1. The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let…
The remix version of the realistic handcuffs doesn't have a key, so I made one.
Modified Lids for keychain pillbox tubes to add a hidden handcuff key.
Superman logo cufflinks. Easy to print and snaps tightly together. !!! Now with a multi-material version !!! The cufflinks hinge is inspired by the Star Wars Cufflinks by belch: https://www.thingiverse.com/thing:104758 I needed superman…
This is printed with 3DJake TPU 95A and a .4 mm nozzle on the Prusa MINI.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Naughty fingers pinching a few too many Christmas cookies? Put a stop to that with these print-in-place fingercuffs. Just slip them over the first or second knuckle and squeeze the ratchet shut. They are sized for about 18mm dia. fingers,…
I used the handcuff ratchet system as a clamp for another project but then went on to re-purpose the design into this toy handcuff design. That’s why it's keyless and better as a toy. I’m not sure they could restrain anyone for long,…
This is the end cuff/end connector for shop-vac brand vacuum hoses. The locking tab takes some force to be pushed in, but can still be removed with a flathead screwdriver without damaging the locking tabs. This is compatible with 2 1/2"…
Showing your stylish sense of printing with 3d printed cufflinks Simple cufflinks to wear Glue the stick to keep it in place Print instructions I included 2 files (cufflings_short and cufflings_long) for different sizes.
This can hold the cuffs closed below: https://www.thingiverse.com/thing:3413757 It may work with these: https://www.thingiverse.com/thing:2994325 I found that the big version of the nut and bolt worked the best because I could get a…
Simple key. Not a lawyer but breaking out of handcuffs is typically a crime. You've been warned.
Hello, this model allows you to access all 8 face buttons on the controller without removing your thumbs from the sticks. I recommend you print with 3 walls, 10 percent infill on all parts, PLA is fine, but I would recommend stronger…
An adapter that lets you use your Milwaukee packout vacuum with Festool tools and accessories. The adapter replaces the hose end cuff for a clean interface and looks. It can be used for either male or female connections. The design is a…
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
I've used the word “standard” in the brief description above, but there doesn't actually appear to be a standard. Each manufacturer seems to deliberately make tools a few millimetres different to the other so they can't be cross swapped!…
Snap cuff collar which cannot be readily opened
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
Too cynical? Too soon? Printed in elegant Galaxy Black PLA. 0.15mm layers, no supports. The ball and chain links print in place. The clip-on earring hoops and the cufflink studs print separately. Note that the ball has a small brim tabs…
A mini 'cuff link only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the cuff links, so I made a mini version that holds 2. There's also a credit card sized version with x6 here. Key Features: Includes one…
The source marked this model as adult content.
They are comfortable and stay on pretty well as is, but you can probably use some prosthetic adhesive if you expect lots of movement. Printing them with low infill helps keep them lightweight.
Better locking system for a eq. Irish 8 cuffs, but can also be used for other cuffs. With a attachment ring on top. This is the Irish 8 cuff I used https://www.thingiverse.com/thing:4287649
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
Dark knight's cufflinks, printed upside down for a smooth surface of the logo. Print with 2 tree supports. Let me know if something else needs to be changed.
Please note, that you are able to open the cuffs by yourself with enough force even without the key, because of the stiffness of PLA. The key is a normal handcuff key and not included in this design. For a finished thumbcuffs, you need:…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ The EZ Thin Body Scuff new scuff body with front mounts that fit the MCEC top paddles, and bottom paddles that fit the 2654P bottom paddles . New lower profile…
Need a pair of cufflinks for your new dress shirt? These knurled cufflinks will get the job done! More designs coming soon! Printing Tips! The post and head may need to be scaled slightly in your slicer. Scaling the head to 105% and the…
I enjoyed designing my Handcuffs so much I decided to make a pair of Thumbcuffs too. To unload lock insert the key and turn in one direction to unlock one side then the other direction to unlock the opposite side. Hardware Required for…
You need a spool holder, and you need it fast! This minimalist spool holder prints in minutes, not hours. Just jam 608 skate bearings (you must have some of those lying around) onto the ends of 2 Bic pens (check the sofa cushions) and…
A comfortable ear cuff that can be sized to fit an adult or child, and a modified chain earring to complete a costume. My daughter won't wear clip on earrings but I needed to make something work for her Rumi costume, so I made the dangly…
An adapter that lets you use your Milwaukee packout vacuum with Festool tools and accessories. The adapter replaces the hose end cuff for a clean interface and looks. It can be used for either male or female connections. The design is a…
These are some simple printable earcuffs Give me a follow if you like my models :3 as it would help me out <3 I got a discord where I post and discuss my work here Discord Link If you feel extra supportive then you can buy me a coffee…
Hole measures 73mm in diameter and 42mm deep, with the cuff and larger gears being flexible. The smaller pinion gears and their stays can be added after fitting the cuff and are rigid. The little "spikes" have an M6 bolt pattern and can…
This is a simple design for cufflinks which uses a threaded connection on the cap to attach two sides together. This should be a bit stronger than the typical hinge/hook design. I have made a simple button design, and a gear design. You…
I made hand cuffs for dummy 13 for when he's being bad. To put on the hand cuffs remove the hand and silde it over the arm (see photo)
Supporto per cuffie over ear facile da stampare
The Lava Bracer is a 3D printable forearm accessory featuring a dynamic molten rock design with intricate textures, ideal for cosplay or as a unique wearable art piece. Printing Settings Printing Settings: - Printer Model: Prusa i3 MK3S -…
This is for 50mm inner diameter spiral hose (aka convoluted hose, or flexible ducting hose), the kind typically used in a workshop for dust extraction (although often it's larger diameter in a workshop). I find that for short runs, 50mm…
Tame your cable hoard. Ditch all those damn twisty ties, and forget tying your cords in knots. The Cable Dragon ratchets down on larger cables like laptop chargers, long USB cords, light duty extension cords, and video cables. The clicky…
Are you tired of losing your spouse at the mall? Sick of your child wandering off at the theme park? Don't you just want to ensure they can't get away from you and chain their finger to yours? WELL LOOK NO FURTHER FOR A SOLUTION! This is…
The size is different than the other model, but let me know if you want me to remake the whole fiddle
Star Wars Padme Arm Cuff for Halloween Costume I printed with 15% infill PLA, added a 5mm brim inside and outside to prevent the part from slipping off the print surface.
Container for the McCuff no spill motorcycle funnel. Created to prevent fuel odor when storing in saddlebag unlike the supplied fabric container. Highly recommended to print in PETG or another chemical resistant filament. No Supports…
This is a cufflink, with the Open Source Hardware logo on the primary side, and the Open Source Logo on the secondary side. Next time you attend a fancy event, let others know you are a maker! Print instructions Print laying on main face,…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ The EZ Wide Body Scuff is a new scuff body with front mounts that fit the MCEC top paddles, and bottom paddles that fit the the single lever paddle that I made…
Print the files like in the preview image -No supports -No glue -Just click in the design you want
The source marked this model as adult content.
I recommend putting supports on some pieces of chains, if it doesn't take up supports don't put them, but I do it because I'm a beginner.
