The source marked this model as adult content.
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
- Downloads
- 778
- Likes
- 330
- Rating
- 0
93 models
The source marked this model as adult content.
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…
Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…
The source marked this model as adult content.
Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
This is a pair of realistic Handcuffs I designed off of a picture I found on the internet. They feature a button activated double lock. After activating the double lock turn the key in one direction to unlock the lock then the other…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
These cuffs have functioning chains that connect them and the entire print can be printed in place so that nothing needs to be assembled. Depending on printer accuracy, you may need to move the chains around after printing to get the…
The original by Bababbak is a lovely design and does what it needs too with allot of practical simplicity. But the authors own recommendation was to print a remix with a metal spring. I've always been a bit of a purest in finding ways to…
The source marked this model as adult content.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
This is a easily printable model that is well functioning and lots of fun. If your key breaks or gets lost you can make another or, if in need of a faster solution, use something like a bent paper clip to push the lever inside of the…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Toy handcuffs with key and keyless operation. The parts can be printed in different colors to match your favorite super hero. In the example photo, the lower half of the build plate was printed separately in a different colour. Sized to…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
This model is compatible with the lego system.
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I lost the keys to these toy handcuffs years ago. I don't actually need them anymore but if someone else gets them in the future, I wanted to be able to give them away with keys. I designed them to look similar to the old ones (from what…
Esposas para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Version updated! Now it´s version 1.1. The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let…
The remix version of the realistic handcuffs doesn't have a key, so I made one.
This is printed with 3DJake TPU 95A and a .4 mm nozzle on the Prusa MINI.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Naughty fingers pinching a few too many Christmas cookies? Put a stop to that with these print-in-place fingercuffs. Just slip them over the first or second knuckle and squeeze the ratchet shut. They are sized for about 18mm dia. fingers,…
I used the handcuff ratchet system as a clamp for another project but then went on to re-purpose the design into this toy handcuff design. That’s why it's keyless and better as a toy. I’m not sure they could restrain anyone for long,…
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
The source marked this model as adult content.
They are comfortable and stay on pretty well as is, but you can probably use some prosthetic adhesive if you expect lots of movement. Printing them with low infill helps keep them lightweight.
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
Please note, that you are able to open the cuffs by yourself with enough force even without the key, because of the stiffness of PLA. The key is a normal handcuff key and not included in this design. For a finished thumbcuffs, you need:…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ The EZ Thin Body Scuff new scuff body with front mounts that fit the MCEC top paddles, and bottom paddles that fit the 2654P bottom paddles . New lower profile…
I enjoyed designing my Handcuffs so much I decided to make a pair of Thumbcuffs too. To unload lock insert the key and turn in one direction to unlock one side then the other direction to unlock the opposite side. Hardware Required for…
These are some simple printable earcuffs Give me a follow if you like my models :3 as it would help me out <3 I got a discord where I post and discuss my work here Discord Link If you feel extra supportive then you can buy me a coffee…
I made hand cuffs for dummy 13 for when he's being bad. To put on the hand cuffs remove the hand and silde it over the arm (see photo)
Are you tired of losing your spouse at the mall? Sick of your child wandering off at the theme park? Don't you just want to ensure they can't get away from you and chain their finger to yours? WELL LOOK NO FURTHER FOR A SOLUTION! This is…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ The EZ Wide Body Scuff is a new scuff body with front mounts that fit the MCEC top paddles, and bottom paddles that fit the the single lever paddle that I made…
The source marked this model as adult content.
I recommend putting supports on some pieces of chains, if it doesn't take up supports don't put them, but I do it because I'm a beginner.
The source marked this model as adult content.
Did you lose those spare keys for your cheap handcuffs? Of course, you did they're tiny. Don't throw them away though, just print these.
This model is compatible with the lego system.
The fingercuffs by LoboCNC were almost a perfect fit for the gi joe action figures my stepson has, but I had to modify these to fit the figure. The only reason I'm uploading it like this is it was VERY difficult for me to find these…
Printed the original chains for a One Ring and thought it would be fun to make a chain with rings attached to fidget with, at some point I realized that they were Finger Cuffs, so I went with that. I might add different lengths later as…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
This is a Hair Cuff for Suicide Squad Harley Quinn. I recommend to print this in ABS and vapor smooth it for a shiny finish. Might need scaling up for Aceton smoothing!!!! Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
No support needed Parts required : 1x M4 heat insert 1x M3 heat insert 1x M4x40 screw 1x M3x20 screw
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the medium model, with strands loop height around 6.5 cm . Check the large (…
I saw some tags for Glencairns that were flat but didn't see any that were the shape of the base so designed one. These are multi-part models so you can either split into parts or use multi-material painting to assign colors/extruders to…
It is designed for this lock. Search for image on amazon/aliexpress. You need to tap a thread, and add threaded inserts to it (M3) for mounting.
designed to be printed in mostly TPU for actor saftey (and ease of breaking or coming apart if accidents happen print 2 copies the only piece metal is the spring. the chain can be extended and added links to . and printed in place if…
Tired of having your spare karting axles end up in a different location to where you packed them? Buddy-Up your Axles with "Axle Cuffs". Secure each axle with a partner and stop them from escaping their designated location in your lock-up…
My modest version of Ochako Uraraka Ear Cuffs I've made for my daughter. Made a hole inside to make room for the ears, that's the only place which need supports I think. Still need to print it myself. Please like it and share it. And if…
Lots of great binder models online, but I wanted one with: No magnets Using soft TPU as a printable insert to press against your wrists The only thing you need is 10x 20mm m3 screws (you could get away with less, hypothetically 2 plus…
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the small model, with strands loop height around 5.5 cm . Check the large (…
Third iteration!! Now fully configurable with Onshape's configuration features. Need a small or tiny one to fit your irregular spring / screw choices? No problem. Items Required: 0.4" long pen spring 2 small-ish screws Step one: Click on…
English version This is a remix of Printcuff's irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the large model, with strands loop height around 7.5 cm. Check the medium (…
This is a variation of a common “ring in cuffs” wire puzzle. My decision to stylize this and not use round objects cost me a lot of time while designing this and also makes it slightly more difficult to use. Perhaps a good thing for some…
Soft handcuffs made from TPU. Printed in one piece, yet flexible and softly bendable. The complete print already includes the chain between the handcuffs. They are only fastened with snaps, but still hold quite firmly. The chain is…
Large cablecuffs - cable clamp, fully printed version from ABS. Print instructions Category: Outdoor & Garden Summary Large cablecuffs - cable clamp, fully printed version from ABS. Print Settings Printer Brand: Prusa Printer: Prusa Clone…
This little gadget will help to avoid loosing your precious new wireless headphones. Print a cuff for every earpiece and connect them with a string. Very simple, very helpful. Update: Corrected the diameter of the hole to get a tight fit.…
I designed these to keep things under control between my Creality Space Pi X4 filament dryer and the Prusa MMU2S on my MK3S+. The four dryer tubes were flopping everywhere, so I grouped them two-by-two using these small cuffs. They are…
Wanted some cuffs for mounting lights, poles and really whatever I wanted to my bike rack. Usually these come with the lights and whatever, but I wanted to make my own for a project I'm not sharing yet. Anyways, these hold together with…
I started making a couple of these to bundle printer cables. I figured that various styles would be good for other things, so I expanded the line. There are four different sizes. Approximate inside, flat 12mm x 18mm, small 20mm, medium…
Zip Tie (Riot) Handcuffs - Adaptor for 0.35 inch thick Zip Ties Head of the zip tie goes through the big holes on the sides and the other end of the zip tie goes through the smaller holes through the head of the zip tie. Pull rind has…
This sign, made with a lasercutter, represents the obligation to use ear cuffs when using very noisy machines that can damage your hearing. I made it with a 3mm plywood sheet, engraved with the laser cutter that follows the drawing…
I wanted to put the Henry Vacuum cleaner on a shelf in the garage, and was concerned that when moving items about there would be a possibility of it landing on the floor (or a car)! I created these "wheel-cuffs" for the front two caster…
EN if you are going to slice it yourself then put a brim on the chain and some supports unfortunately the chains don't look the best because of how small they are CZ Pokud si to budete slicerovat sami tak dejte na řetěz límec a nějaké…
This is for the Majin Uub custom you can find on my tiktok. I may redesign the belt in the future. These were made in Tinkercad, im not the best at 3d modeling lol. Also I would use .2 mm nozzle or atleast a lower layer height. No…
Four little stockings for the tree, each with a cuff, a hanging loop and a raised pattern: stripes, polka dots, a heart and a star. Lovely as gift tags, on a garland, as place settings or to mark each child's present. Print the base in…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
Lots of great binder models online, but I wanted one with: No magnets Using soft TPU as a printable insert to press against your wrists The only thing you need is 10x 20mm m3 screws (you could get away with less, hypothetically 2 plus…
Soft handcuffs made from TPU. Printed in one piece, yet flexible and softly bendable. The complete print already includes the chain between the handcuffs. They are only fastened with snaps, but still hold quite firmly. The chain is…
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
This 3D printable design features wrist cuffs linked by a chain, engineered for hassle-free printing in a single process without the need for assembly post-printing. Printing Settings - Filament Material: PLA - Layer Resolution: 0.2 mm -…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Nice Arm cuffs from to be hero X. The supports required. Some parts need…
How to build: Print as many links as you want. (≅5-20) Print 2 of everything else. Click the links together to make a chain. Put a cuff P1 and cuff P2 on a hingeamajig P1, then glue a hingeamajig P2 on top. Repeat step 3. Snap the…
Small handcuff for dummy 13. Remove the hands. pass one of the hand connectors though the middle at a time, reattach the hands. Will flex a little during instalation, this is on purpose.