The source marked this model as adult content.
- Downloads
- 49,247
- Likes
- 12,541
- Rating
- 4.75
12,232 models
The source marked this model as adult content.
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
Stealth Press 1 Important! As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version. We recommend downloading and building the Stealth Press 1S version. Stealth Press 1 revision will remain accessible for…
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Rock-Solid and lightweight emergency whistle. Two chamber design. Painful loud. Print Settings Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: Print on its side (as it is in the stl-file) without…
After the first attempt I made this one louder and easyer to print.
2.4 : 1 Scale Study Model of a Cylinder Lock I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism. Video assembly instructions: I've always been fascinated by…
JERRARI3D.com The Gen2 Parts Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. These parts drawers feature divided…
Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
🥚 Easter Bouncy Egg – Spring into Motion! 🥚 Imagine an Easter egg that doesn't just sit in the basket – it comes to life! Inspired by the classic Slinky spiral, this egg stretches, springs, and bounces. Almost no matter how much it moves…
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
In this final version, I’ve incorporated all the feedback and suggestions. The whistle is now even easier to print thanks to improvements in the internal structure. With thicker walls and an optimized design, it’s also louder than before.…
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I was surprised to find that this model does not come with the wall mount, same issue with the more…
The source marked this model as adult content.
Up to 3 Adapter to mount it properly. (I use cork tape to keep it perfect in place.) You can use cable ties or 15mm hook-and-loop band. CargoCageForkAdapter.stl is for a 43mm fork. Let me now if you need a different diameter. Update:…
Ever broke your rod tip and lost your last eyelet? 😡 Maybe bent up one of your eyelets to where your line wouldn't feed smoothly? 😣 Well if not, trust me, it's maddening… So be prepared with a simple print! 😄 Keep fishing even after you…
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…
This design is made for my bike but should fit most bikes. I used a tool like this to get the shape of the down tube. There is also a Fusion360 file and a .stp file so you can edit it to fit your seat tube and down tube perfectly. The box…
This is our self-watering pot for you - in typical Prusa-style and printed from PLA Recycled . The flower pot is ideal to grow seeds and herbs beneficial to your health, or you can use it as a small pot for your home flowers. You will…
Cyberpunk Kitsune. This would make for a nice wall hanging. In prusa slicer right click on model → add negative volume -→ gallery -→ universal wall mount hole. -→ align to your liking. or do a negative boolean and make it a mask.
https://www.thingiverse.com/thing:2933021
Needed a chest plate for a Robot costume and came up with these. They have two slots on the back for a shoulder strap. They're easy to print and require minimal support. You could probably get away with not having any supports on the…
Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a…
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
Featuring: 3 layers and 10g of your favorite filament 2 holes to quickly mount it under the seat 21.7 x 9 cm (does not extend under the seat like the commercially available ass savers) If you print it on a Prusa Mini/Mini+ turn off the…
This toolbox is made for the cannondale topstone which has an extra bolt for something like that. If you are the one second person on this earth which has a 3D printer the need for a toolbox for your bicycle a cannondale topstone alloy…
Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…
This model is based on the eccentric cycloidal drive. for this model you would need: 4x 608 bearings(the same ones that are in fidget spinners and skate board wheels). 2x m3 screws that are no more than 30mm long. and all 5 of the printed…
This is a print to increase the surface area on the bucket the cyclone is attached to. This creates more stability.
PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…
Hey! This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides…
The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
I only really use the crevice tool with my Shark Ultracyclone vacuum, and wanted something a bit narrower than DASMK3S's model that still kept the feature of the built-in charge connector. I use this bracket to mount my Shark Ultracyclone…
A caricature of a Cyberman from Doctor Who Update: I have added a multicolor version for AMS, however this is untested as I don't have an AMS to test it out. If you do try printing this model let me know how it went.. Thank you.
Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…
The Idea: hide the record player pin inside the tower (up to 19 mm) show as much as possible of Hogwarts around the tower Design Process: I modeled everything myself but used this model as reference Overall dimensions: weight height…
So this is the first prototype of my fully 3D printed motorcycle chain cleaner. Brushes and straps are printed in flexible materil (i use basic TPU) for the body i used Prusament PETG. I will upload new iterations as i develop them.
I designed this for the Toy Cars Competition. Having recently replaced my very slightly worn V-Slot wheels on my 3d printer I'd been looking for a use for the old ones. The car is a simple easy print. 20% Infill and 0.2 mm layers is fine.…
This is my home-made coin sorter! This sorts all of your pennies, nickels, dimes, and quarters so you can finally make use of that coin filled jar you have ;). It is for US currency only (unless your currency has the exact same sizing).…
These letters have height of 4mm on top of a 10x10x10mm cubic pedestal. The letters are meant to be used manually, imprinting something on a clay surface letter by letter. Font - Calibri Size - 5mm height for capital letters Nozzle -…
Bicycle valve caps are notoriously dull. Not this one. Guaranteed to bring a smile to faces when printed in bright color. For the sharpest pixel effect print using 0.25mm nozzle. However the standard 0.40mm nozzle is fine too. Should fit…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say hello to the Articulated Cylinder , a delightful combination of minimalist decor and playful charm! With its moveable legs and expressive arms,…
A model created in honor of world champion Tadej Pogačar' s victory in the 2025 Tour of Flanders . Beautiful cycling and phenomenal performance! You can find similar cycling champion models here: Peter Sagan…
High accuracy thumb sticks improve game performance by 10% when playing various games
Would appreciate your make, a like and/or voting ;-) The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point. When the bike is set out to rain/ wet weather-conditions, water tends to stay in the…
A simple orange drinks coaster I designed for our daughter. Please do let me know if you use it!
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Not content with the designs already out there, I designed my own cyclone dust collector to achieve the following: print quick and cheap (<400g of filament!) use minimal supports (see ‘Support Deck’ section below) integrate a vacuum…
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
REMIX of "Cyclone Dust Collector" - Lower part only! Please get the upper part from here: https://www.printables.com/model/312929-cyclone-dust-collector -------------------------------------- Cool one, made an edit on the lower piece, for…
Say hello to Mini Cylinder Buddy , the tiny 3D-printed friend of Mini Cube Buddy! 🏺✨ This adorable micro figure is perfect for decorating your desk, shelf, or workspace . ✅ Ultra-lightweight – weighs just 0.3 grams ✅ Super quick print –…
The holder for the airtag is made of two parts without the need for screwing. Just insert the airtag and slide the parts on top of each other at a 60 degree angle, rotate and snap the latch. After that, just screw it under the bottle…
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
I was looking for a badge and I found this Cyberpunk badge . Added a hole and a clip in order to be easier to wear. An M3 screw can be used to put the parts together, M3x5.
my own first try of dust cyclone not tested yet vacume hose OD = 40mm
Where the hell is he, for f***’s sake? Arrogant, self-centered son of a bitch can’t keep his yap shut. Probably tellin’ the whole damn crowd what we’re about to pull. Better hope no corpo rats’re listenin’ in. I swear he’d better not f***…
Create a cyclone in two two liter water bottle.
This is a compact and efficient cycloidal gearbox tailored for integration with a standard 775 DC motor , ideal for high-torque, low-speed applications. The design emphasizes precision, durability, and ease of assembly, making it suitable…
🤖 Cybercore Gauntlet – Futuristic Power at Your Fingertips ⚡ Step into the future with the Cybercore Gauntlet , a sleek, sci-fi inspired mechanical hand that looks like it came straight out of a high-tech exosuit or cybernetic lab. With…
Update 3 The center of the hole in the fan adapter was off-center with the fan, so I corrected it. Please use “fan adapter v3”. fan adapterの穴の中心がファンとずれていたので修正しました。「fan adapter v3」を使ってください。 Update 2 アップデート2 There was a gap between the…
This is small project for emergency box for 10 mm socket. I've bought this emergency key box . They aren't very expensive (deppends on a store) and it's much more easier than making whole box. Maybe looks nicer too. The box is 120 x 150…
This is a right angle fitting that attaches to the top of a Dust Deputy cyclone separator. This fitting makes it less likely to kink your vacuum hose. For standard 2 ½ inch vacuum hose. I printed it in one piece in PETG with supports. You…
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A cylindrical air pruning pot for…
keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567
Nice use of space in the door. Both the bin and the lid require supports. I highly recommend using PLA for the support and PETG (or ASA) for the body since this leaves a nice finish without any need for sanding or other post-processing.…
This is a model of a medical linear accelerator based on the “Halcyon” Unit marketed by Varian Medical Systems (Palo Alto, California). Medical linear accelerators are large and highly sophisticated medical devices that emit focused beams…
Deko z.B. für Modellbahner
Super cool and modern cyber version of the simple gardening trovel. You still didn't print one?
This mask prints flat without any supports and with integrated hinges that allow for it to fold around the mask underneath. The red layer in the photos is 4mm high, so the colour change happens after the 4mm mark. In order for the hexagon…
Three colors timer cover. The print files has two pauses for filament color change already included. Following the print I sanded it then I applied two layers each of primer for plastic and transparent paint. I made others timer cover in…
Everything threads together and it has space for a HEPA filter at the outlet component. This part of the design has not been thought out very well so I will likely implement a slide in attachment for the HEPA filter for future use. There…
The Tesla Model XYS3/Cyber Charger Holder embodies a sleek and weatherproof design, crafted to withstand outdoor elements while maintaining its aesthetic appeal. Engineered for durability, it ensures long-lasting performance, seamlessly…
This all-in-one 3D printer calibration test is designed to evaluate and improve your FDM printer performance quickly and accurately. The model includes advanced tests for bridging, overhangs, dimensional accuracy, tolerances, bed…
Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…
Cyclon dustcollection with a bought cyclon (Banggood,Amazon) and a Barell with Cover. The Cyclon is bolted on the Barell. The Adapters for the hoses between the parts are 3d-printed. Vacuum Cleaner: Kärcher MV2.
Narzędziówka pod siodełko do roweru wigry. Drukowane z podporami, najlepiej z jakiegoś filamentu w miarę wytrzymałego i elastycznego, odpornego na niewielkie deformacje, ABS lub ewentualnie PETG. wydruk z PLA nie wytrzymuję wymaganego do…
This is artillery and a fleet to replace the cardboard pieces in Diplomacy. The top of the zeppelin file is the bottom of the zeppelin piece. I made this in Blender and Sketchup. Artillery Print Instructions: No supports or rafts at…
Check out my other Murder Drones designs → here ← --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design…
Print instructions Print Settings ============== Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution : 0.3 Infill: 99% Filament : Devil Design PET Notes: You can use other material if you want Standard for 0.4…
I made this model based on real Scythian hair pin If you need the original Fusion360 file or you want to support my work you can do it here, with buying the model for a nominal sum . Western Asia, Scythian culture, ca. mid 1st millennium…
Original project of racing Tesla Cybertruck. Approx model scale 1:18 The vehicle has been completely redesigned and lowered. Now it has a real cool look. The whole model is bolted together with (11x) 3x15mm (on wheels can be used longer…
English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…
MSLA Cyclop Printer ! If you like my work, you can help me by buying me a coffee, thank you! https://buymeacoffee.com/guillaumehy or paypal.me/guillaumehaouy I should point out that I am a 20 year old student, it takes me a huge amount of…
This is a 36:1 two stage cycloidal drive that's designed to be print in place. It is thus also limited to demonstrating the principles and functionalities of this type of cycloidal drive but cannot be integrated into an actual complex…
I designed this logo to be as close as possible to the original Cyberpunk 2077 logo. Unlike many existing models, this version is not simplified and is based directly on the Cyberpunk 2077 svg available on Wikipedia, ensuring accurate…
This is a simple magplate that i made for my Mp5 mags to make it easier to grab while in the heat of the moment. I have also included a version without the handle if you just want to replace the normal one. For printing i would not…
A blind cover for euro profile cylinder door handle face plates. I made this model for Hoppe short backplate Birmingham 1117/202KP/AP (11794926) handle sets for profile doors, so you might have to alter it a bit to make it work if your…
Kolczyki / breloki do kluczy z motywem błyskawicy na Strajk Kobiet. Udostępniam dwa pliki: kolczyk.stl - sama błyskawica kolczyk-glowa.stl - błyskawica na tle kobiecej głowy kolczyk-pusty.stl - błyskawica pusta w środku bombka.stl - duża…
This 3D-print will help you mount a battery in the cabin of your Nihola Family cargo bike . Contact me, if you need a kit. See also my programming cable for TSDZ2 . Material needed: 3 x battery-holder.stl. 1 x battery-holder-bottom.stl. 1…