Search results: damper

Sort order

493 models

P
Printablesrottenbeans

(outdated) Prusa MK3/S Z-Axis-Top Ball Bearing Upgrade - Anti Vibration/ Anti Ghosting / Noise damper / silencer

Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…

Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant

Downloads
145
Likes
18
Rating
4.67
P
PrintablesMoto_Garage

1992 Ducati 851 & 1993+ 888 gas tank spacer for Ohlins steering damper mount

Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Downloads
2,260
Likes
585
Rating
4.88
P
PrintablesHuys

3in Duct to 4in Damper Adapter

Adapter to connect a 3" duct directly to a 4" damper or any 4" duct. Inner diameter of the large end is 100mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: Any Infill: 5%…

Downloads
1,283
Likes
58
Rating
4.89
P
PrintablesPetclaud

Prusa MK3 Z axis vibration damper

This is a very simple, super fast to print z-axis vibration damper for the original Prusa MK3. The Z-top parts for the MK3 are closed at the top. Still the hole for the z-rods on the top parts are much larger than the Z-rods: this is as…

Downloads
1,171
Likes
179
Rating
4.47
P
PrintablesRui do Carmo

Squash Ball MK4/MK3s/MK3s+ Vibration Damper V4.0

New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…

Downloads
1,155
Likes
285
Rating
4.91

Logitech G29 G920 Brake Pedal Damper Mod

You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…

Downloads
1,062
Likes
137
Rating
5

Air Vent Damper

Adjustable ventilation duct. No supports. For dehumidifier/drybox. 2 piece snaps together. Update: Added a version with smaller holes at the bottom. It's a TIGHT FIT! Just rock it back and forth until it snaps on! Needs to be tight to seal!

Downloads
816
Likes
142
Rating
5
P
PrintablesFranCAD

Backdraft Damper Airflow Control Valve

This model is a round backdraft (or intake) damper designed to prevent cold air from flowing back into warm air ducts, e.g. a bathroom extractor fan. It allows airflow in one direction while blocking reverse airflow. The model has a…

Downloads
780
Likes
69
Rating
4.86
P
PrintablesOsfald

Low profile toolless Prusa i3MK3/S i3MK4/S squash ball feet damper vibrations/noise isolator

You may find two versions of .stl attached: v2 which is higher (about 4 mm regards to v5) and tighter in tolerances, what results some minor problems during mounting into the profiles, v5 which is lower and fits not so tight as v2 (easier…

Downloads
755
Likes
151
Rating
4.98
P
Printablescontrast

Gustar Guitar Damper

My take on the guitar string damper. I have seen these in various shapes, sizes and material for sale. I did not find one that could be 3D printed, so I designed one myself. It’s minimalistic and very sleek looking. Currently made for six…

Downloads
738
Likes
192
Rating
5
P
PrintablesWilko_SLO

Soft Close Door Damper (Settable Resistance)

Print it with PLA or PETG and put in standard pencils spring. Designed for different string length, from 25 to 35mm with appropriate Cover Plug Overall length should be around 75mm (Use different Cover plug to achieve the length) For…

Downloads
704
Likes
240
Rating
4.5
P
PrintablesOrzOrzOrz

Elegoo Neptune 4/Pro Vibration Damper

Yet another vibration damper inspired by the Bambu Lab design. The damper is 30mm in diameter and 41mm in height. You have to remove the original ones and replace them with these. The damper is made to fit the original screws. With this…

Downloads
699
Likes
179
Rating
5
P
PrintablesMr_Joostik

Vibration dampers for Kobra 2 Neo

Vibration dampers of the legs for kobra 2 neo. When printing, the printer shakes everything around a lot. These dampers reduce the shaking around. Rubber round spacers on the bottom prevent sliding on the table and dampen vibration even…

Downloads
609
Likes
91
Rating
5
P
Printablesjazzychad

4in (4 inch) duct valve volume damper

Assembly instructions coming soon… (hopefully it is pretty self evident) The only part that needs supports is the “Valve”

Downloads
565
Likes
102
Rating
4.5
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+ Vibration Damper

Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…

Downloads
564
Likes
126
Rating
4.71
P
PrintablesDJ_Designs

Motor Decouple-Damper

update 2. Nov 2022 Different heights of the big shoulder of the pulleys from different vendors. forced me to make different versions of the L mount. So measure your pulley and chose the correct mount. and R mount is corrected by 0.2 BOM 1…

Downloads
555
Likes
190
Rating
4.94
P
PrintablesMike

Simple squash-ball damper

just another quash-ball damper. I designed my own with a super low profile. It works great! Print instructions Print everything in PETG. You need 8 M3x10 screws and nuts and 4 squashballs. I use one yellow dot.

Downloads
465
Likes
61
Rating
4.88
P
PrintablesTitan

Doc Green (Xiaomi M365, Pro and Mijia) E-Scooter Anti Vibration Damper 0.2mm to 2mm

Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…

Downloads
389
Likes
39
Rating
5
P
Printableslazzymonk

Vibration Damper v3

The 3rd version of my vibration damper. It is much easier to assemble than v2. It is as strong, as effective and 2 parts instead of 5. I have now added a jumbo version (idea of cain666). The springs are twice as wide so should be able to…

Downloads
350
Likes
54
Rating
4.6
P
PrintablesKylePrints

Ender 3 S1 Pro Y-Axis Stepper Motor Damper Housing

A simple merge of two Y-axis housing files. Main body of the mount that accommodates adding a damper from Nathan here . His model was made to hold a different Y endstop so I merged it with the endstop housing from Matthew here: here . II…

Downloads
344
Likes
46
Rating
1
P
Printablesdarkamikaze

Vibration Damper / Anti-Vibration for Anycubic Kobra

I made these feet to increase the height of the Anycubic Kobra as well as get anti-vibration properties. This is very similar to the anti-vibration feet you can find for the Prusa but these have circle holes that can slip directly into…

Downloads
313
Likes
47
Rating
0
P
PrintablesFabri91

Synology DS218+ vibration damper

Vibration dampening support to be placed under the NAS's square foot. May fit any model that uses the same 13 mm side foot. To be printed in TPU - for my usage, with only one “heavy” 3.5" hdd installed printing it with two walls, 0.2 mm…

Downloads
312
Likes
46
Rating
5
P
Printablesgeorg

Damper for Ender 3

Dampers for Ender 3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Devel PLA Green Notes: Dampers for Ender 3, not to soft, not to hard. Category: 3D Printer Accessories

Downloads
289
Likes
42
Rating
5
P
PrintablesMike Froehner

Creality K1 Max - Top Riser with Damper

This is my version for of a top riser for a Creality K1 Max. If you like you can tip me via paypal: https://paypal.me/crazYm1nd Since printables.com does not support markdown (copy/paste) in the description I have created a PDF and a…

Downloads
282
Likes
80
Rating
5
P
PrintablesArea51

Prusa I3 MK2 Vibration Damper Rubber feet

Simple feet for Prusa I3 Mk2 to reduce noise and prevent slipping on the support surface. Can be used with or without the Prusa felt pads already on. Must be printed in a flexible filament like Filaflex, NinjaFlex or similar (Hardness 92A…

Downloads
277
Likes
34
Rating
5
P
PrintablesScottW

Automatic 120mm Fan Damper for Prusa Original Enclosure

Installing an exhaust fan to keep your Original Prusa Enclosure cool for PLA or PETG? But don't want air escaping when you print ABS or ASA? Then you need a fan damper! This damper is designed to fit the 120mm cutout on the back of the…

Downloads
267
Likes
75
Rating
5
P
PrintablesINVESTEGATE

Playstation 5 PS5 Anti-Vibration vibration damper rubber mat - better airflow cooling

I designed a vibration damper for the base of the Playstation 5. Increasing the base also improves airflow and thus cooling. You can choose: 10 mm thick with logo 10 mm thick without logo 5 mm thick with logo 5 mm thick without logo (I…

Downloads
263
Likes
61
Rating
5
P
PrintablesRESTLESS DESIGN

Air Vent Damper

This is an air vent damper for a filament storage solution. You can open or close the air vent by twisting the top part. Thanks to Triple G Workshop for his amazing design, upon which my model is based! Support If you'd like to support me…

Downloads
225
Likes
36
Rating
5
P
PrintablesROLS733

P1P / X1 C Feet for Anti Vibration dampers

This feeds fits perfect for Anti Vibration dampers for Washing machines or dryers. This can be found on ebay or any other platform for about 6€ The vibratrion is much less than with the original feet. Should fit on any other Bambu Lab…

Downloads
218
Likes
47
Rating
5
P
PrintablesPetclaud

Prusa MK2 / MK2.5 Z-Axis vibration damper

When the z-height of my Prusa MK2.5S is about 30 mm, the threaded z-axis touches slightly the original "Z-axis-top-part" and when these elements touch, they generate an irritating vibrating noise while printing. So to overcome this…

Downloads
215
Likes
27
Rating
4

Adjustable Vent/Damper

Use this adjustable vent to allow air or other gasses into or out of a closed volume. The slots are angled to create a vortex as the air flows through to help mix the air as it enters. I designed it for a 3D printer enclosure to bring in…

Downloads
213
Likes
28
Rating
0
P
PrintablesTushka

Volkswagen climate control damper actuator rod V159

100% заполнение ABS или PETG update ver.1.1 - убран пропил в звездочке для большей жесткости.

Downloads
206
Likes
8
Rating
0
P
Printablesbooshi

Kanto YU2 LED Dampers

These come in two varieties: full cover, and a notched one that allows for some light to come from the bottom of the damper. Slotted damper shown in the photo. Infill doesn't matter given the size. Printed as shown in Prusament Galaxy…

Downloads
201
Likes
11
Rating
4
P
PrintablesKotyarko_O

Bmw E30\E28\E21 - glove box damper pin (OEM: 51 16 1 828 956)

Glove box damper pin. OEM-number: 51 16 1 828 956 Fits on many BMW models (E21\28\30\31\34\38\39\46\60 and more...). Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at…

Downloads
201
Likes
41
Rating
0
P
PrintablesSimone Spezzigu

TPU Vibration damper for Kingroon KLP1

These are customized support feet printed in TPU, they greatly reduce the vibrations of the structure, I recommend re-calibrating the input shaper after installing them because they modify the resonance frequencies The correct orientation…

Downloads
198
Likes
31
Rating
0
P
PrintablesJP_cr-01

RC: Damper stand

RC: Damper stand (shock stand) size: 5/11/14mm Assembly dimensions: W90mm D60mm H60mm Please print two sideways usually a tool Remixable OK

Downloads
197
Likes
32
Rating
0
P
PrintablesOliverGibson

FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU

FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.

Downloads
196
Likes
15
Rating
0
P
PrintablesStrioster3D

Ender 3 Pro damper feet 2x 2020 profile

Ender 3 Pro damper feet 2x 2020 AL profile (40x40). Max feet load 3kg. Optimal load is 2kg per feet. Tight fit, you can enlarge model when you want more loose fit. Print material: PLA Perimeters: 5 Supports: YES, for enforcers only

Downloads
195
Likes
27
Rating
0
P
Printables3DPrintSOS

Ender & CR-10 X Axis Cover and Nema 17 Stepper Damper Spacer

The Problem: I wanted to reduce the noise coming from my steppers during prints at night but wanted to try to print in TPE instead of buying the dampers. The hardware required for the x-axis spacer is hard to find and needs to be 3mm…

Downloads
185
Likes
28
Rating
4.67
P
Printableskuldar

Bambu Lab A1 Mini vibration damper (TPU)

I used settings above, figure out your own favourites.

Downloads
180
Likes
23
Rating
5
P
PrintablesNatronics

Vibration Damper TPU

You can put these under the feet on your printer to give it some isolation. Print with flexible material. Scale to the size you need. Category: 3D Printer Accessories

Downloads
172
Likes
13
Rating
0
P
PrintablesThomas H 3D

Blum hinge damper adapter with snap fit

This is an adapter for the blum hinge damper available at IKEA and other suppliers. The included stl is for 5mm screws with a distance of 32mm. I've included a fusion 360 file with user parameters where you can change both diameter and…

Downloads
167
Likes
50
Rating
5
P
PrintablesBen White

Ender 3 - Y-Axis Stepper Damper V2

When I originally ordered my Ender 3, I also purchased a few stepper motor dampeners. To my dismay, the stepper motors had press-fit pulleys, preventing me from being able to use most of them. My previous design worked very well, but it…

Downloads
163
Likes
26
Rating
5
P
PrintablesM²E

squash ball damper - toolless

Squash ball damper which can be assembled without any tool. My Prusa got extremly silent after the assembly. ball diameter: 40mm

Downloads
160
Likes
32
Rating
5
P
PrintablesStefan R

Toilet Seat Damper / Ersatzgummis für den Toilettensitz

If you need to justify your 3D printer cost, think about printing these dampers as replacement for your worn ones. Your better half will really appreciate that! I first tried PETG as material for these but after some month they broke. So…

Downloads
160
Likes
29
Rating
5
P
Printablesmatroosoft

Sovol SV06 contact noise damper feet (TPU 95-a)

The Sovol SV06 transfers about 50% of the sound it makes while printing through its feet. This contact noise can be removed with my dampening feet. It's quite springy and compresses about 5mm under the weight of the printer. Despite that…

Downloads
157
Likes
21
Rating
5
P
PrintablesfreakyDude

FreakyFoot V2 - anti-vibration damper feet (HULA)

This is my variant of an anti-vibration damper feet (based on the HULA seismic damper concept). The idea is to damp fast movements only in x and y direction but be stiff in z direction. I printed it with ASA, Nozzle 0.4mm, Layer Height of…

Downloads
148
Likes
49
Rating
5
P
PrintablesMick Schroeter

Prusa enclosure damper foot

I couldn't find a decent squash ball foot for the Prusa enclosure so I made my own ;-) I recommend squash balls with a yellow or red dot. https://www.decathlon.de/p/squashballe-roter-punkt-sb-560-2er-pack/_/R-p-3482

Downloads
141
Likes
83
Rating
5
P
Printablesysengard

Fanatec CSL Elite Pedals - TPU Brake Dampers

Super easy print, if your rubber damper for the CSL Elite is broken due to hard use. Change the infill to increase or reduce stiffness, I like it at 50%, I found 25% is too soft for me but that is my personal preference. Print settings:…

Downloads
139
Likes
23
Rating
0
P
PrintablesKrayzzee

Voron 2.4 bottom panel virbration damper

I had vibrations that where visible in my input shaper graphs. These clips are long enough to press down onto the bottom panel and dampen the vibrations. I put a 3mm isolation i got left from my panels on the bottom so i won't press…

Downloads
137
Likes
39
Rating
0
P
PrintablesWritable

LAUFEN Pro kompatibler WC-Sitz Puffer / Toilet Seat Damper for LAUFEN Pro

If there's someone out there needing this text in english, please use google translator (as I'm too lazy for a translation right now) ;) Ich habe auf Thingiverse vergeblich nach Gumipuffern für einen LAUFEN Pro WC-Sitz gesucht (das sind…

Downloads
135
Likes
12
Rating
5
P
PrintablesMichael Schmitz

Nema 17 Damper

Nema 17 Damper for MPMD (Monoprice Mini Delta) and V2 The extruder makes quite some noise in the frame. This damper i used to reduce this a little. Some bigger holes should be drilled, like shown in the pictures.

Downloads
133
Likes
16
Rating
5
P
PrintablesDiego F2M

(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)

if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…

Downloads
129
Likes
27
Rating
5
P

Flsun QQ damper

Vibration Dampers for Flsun QQ Print Settings Printer: Flyingbear Tornado Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25% Category: 3D Printer Accessories

Downloads
129
Likes
10
Rating
4
P
Printablespipersw

Damper feet for DS920+

Damper feet for Synology DS920+ . Print in TPU 98A with 5 perimeters note : after day of use, the best mod is velcro (the soft side, not the hoock side) under the disks

Downloads
124
Likes
19
Rating
5
P
PrintablesFromock

TPU Vibration Damper - 3030 Extrusion

Damper snaps in to 3030 extrusion for easy installation/removal. Reference settings for 95A TPU and 0.4mm nozzle Adjust infill density and/or z-scale (damper length) to fit your needs. The Mk3 and MK4 printers have most of the weight on…

Downloads
124
Likes
29
Rating
5
P
PrintablesNairck

Prusa i3 MK3S - Noise and Vibration Damper Feet

IF YOU KNOW THAT THESE WORK WITH OTHER PRINTERS, PLEASE COMMENT AND I WILL UPDATE THE DESCRIPTION! Noise and vibration damper feet for your Prusa that install just like those silly little rubber ones in the kits! These bad-boys will…

Downloads
123
Likes
10
Rating
5
P
PrintablesJustIPrints

Creality Ender vibration dampers V2

Works for Ender 3, Ender 3 pro and other printers that uses 40mm aluminium extrusions on the bottom. I have designed Ender 3 anti vibration feets with stock bed springs. But it's a bit too wobbly so I decided to use Ender bed silicone…

Downloads
121
Likes
32
Rating
5
P
PrintablesJustIPrints

Ender 3 vibration dampers

Works for Ender 3, Ender 3 pro and other that uses 40mm aluminium extrusions. I was searching for the best looking and working ender 3 anti vibration feets. I haven't found what I would like so I decided to design my own feets. Everything…

Downloads
118
Likes
24
Rating
4.5
P
Printablesjubuttib

VKB T-Rudder Mk IV Hydraulic Damper Mount

Again a huge thanks to my buddy Qwarzz for help with the CAD side of things! A block that attaches to the VKB T-Rudder pedals and allows you to attach a hydraulic motorcycle steering damper to the pedals. Improves the feel of the sprung…

Downloads
111
Likes
13
Rating
0
P
Printables3D-Muc

Vibration damper for a 3018 CNC milling / engraving machine

Vibration damper for a 3018 CNC milling / engraving machine Take the 20mm thick foam from the packaging and cut it to fit. This works very well. You can also experiment with different types of foam rubber for optimal cushioning. Cut the…

Downloads
107
Likes
15
Rating
5
P

SV08 Enclosure Vibration Damper

Press these vibration dampers (I recommend 3 per panel) into the “egg-crate” design of the printer to pinch the enclosure panel against the base. No gluing is necessary. There are different versions for different thickness panels, up to 4…

Downloads
107
Likes
31
Rating
5
P
PrintablesUKE

Door stopper with two-stage damper

Safely holds a door open and prevents it from closing on its own. The two-stage damper design dampens slamming (e.g. wind). Clip-on width 14mm. With different positions on the door, the desired open position can be set. We use it because…

Downloads
106
Likes
25
Rating
5
P
PrintablesConnor Kirby

TPU 130 motor cage damper for nerf flywheel cages

Used to dampen the vibration of a nerf flycage as it operates goes between the Motor and flycage motor mounting holes, in my opinion a very good idea for printed cages to lengthen lifespan. TPU is recommended but could maybe used with…

Downloads
105
Likes
15
Rating
0
P
PrintablesZumkellerspace

NEMA 17 damper (TPE)

This a damper for a NEMA 17 or any motor that has the same dimensions, in order for it to work you will have to print 2 and put 1 on each side of the motor support. It is not as effective as some you could buy but it is a quick and rather…

Downloads
104
Likes
13
Rating
0
P
Printablesplanetar

TPU Damper Feet for Dual Rail 40mm Extrusion

My printer had begun to vibrate noisily and shake my desk so I tried to quiet it by adding dampeners, something TPU could be useful for. Searching around I found things which I liked partially, the dampener body on one, the feet on…

Downloads
104
Likes
24
Rating
5
P
PrintablesFlo

TAMIYA damper/suspension lower spring retainer spare part (e.g. Plasma Edge II)

Only driven a few metres and the first part is already missing and there is no replacement in the packaging? Then print one quickly :-) Needs some Support. As shown in the slicer screenshot.

Downloads
103
Likes
17
Rating
0
P
PrintablesFunkyArt

Artillery Sidewinder - Damper / Feet

Simple dampers for the Artillery Sidewinder X1, they fit over the original "dampers". I printed it with (0,24mm/230°C/50°C/40mm/s) 35% Infill with SainSmart TPU material . I think X2 and Genius use the same size, so it should probably…

Downloads
103
Likes
15
Rating
0
P
PrintablesPrintingDude

HiFi Shock Absorber / Vibration Damper

This vibration damper can help to reduce unwanted vibrations on loudspeakers and other devices. Put one of them on each corner of your device. Print with max. 0.20mm layer height and use a softer material like TPU (hardness should be…

Downloads
101
Likes
21
Rating
0
P
PrintablesKeith Luneau

Ender-3 Y Axis Stepper Mount for Damper

When adding a damper to the Y axis stepper motor, the X-shaped plate under the bed hits the motor before the limit witch is reached. The solutions I found were to either move the limit switch, which costs some build volume and make the…

Downloads
101
Likes
8
Rating
0
P
PrintablesCobaltmaster8

Tarmo5 ultra beefed up torque dampers

This model is designed to be printed laying sideways. Use supports for the CV inner race slots. Do not use 100% infill as it will be too stiff and ruin the rest of the drivetrain.

Downloads
101
Likes
10
Rating
5
P
PrintablesHolger

Cutting Tool for 16mm Silicone Damper (Anycubic Vyper)

A simple cutting jig for 16mm silicone damper which can be used for accurate bed leveling for your Anycubic Vyper. After cutting, the silicone dampers have a height of 11mm. -- deutsch: Eine einfache Schneidevorrichtung für 16mm…

Downloads
100
Likes
15
Rating
0
P
PrintablesOverengineering

Shock absorber damper 1/5 scale RC

This is a 3D printed shock absorber I made for a future 1:5 scale RC car. the travel is about 40mm. It uses mineral oil (baby oil) as a working fluid and uses a M6x80 bolt with the head cut of and threads cut on the secound end as the…

Downloads
99
Likes
23
Rating
0
P
Printablesobservatoer

Cable Guide for Scotts Steering Damper

Suitable to guide the throttle cables when a Scotts Steering Damper is installed. Designed for my Husqvarna FE501/2023 but likely useable for KTM and GASGAS. Printed with carbon fibre reinforced filament. Use the spacer for mounting the…

Downloads
98
Likes
3
Rating
0
P
Printablesschnub

Squash Standfuß - Squash damper - Sidewinder X1

!German below! inspired by by jechr13, me and my colleague decided to create a squash ball damper for the Sidewinder X1. It came out pretty nice. The Screw inside is also hidden, so it doesnt damage the ball! You just can remove the old…

Downloads
97
Likes
14
Rating
4
P
Printablestagno25

Zalman Z11 Plus - HDD Anti Vibration Damper

This is a so you can mount drives in a Zalman Z11 Plus in case you have lost the included parts. You will also need to purchase some #6-32 screws that are 3/8 inch long. You will need four of them per drive. It is recommended to print…

Downloads
96
Likes
11
Rating
0
P
PrintablesBenjiBizz

Lerdge iX vibration damper

Dämpft die Vibrationen von einem Lerdge iX. Kleiner Remix von Fromock. Drucken mit 95A TPU! 4x drucken (3 für Füße 1x für Display/Mainboardarea) kleiner Remix von Fromock: Vertikal Drucken: Top layers: 0 Bottom layers: 0 Walls: 3 Infill…

Downloads
96
Likes
13
Rating
5
P
PrintablesAxel Kark

theFUMP - Bass Guitar Mute Damper

theFUMP is a muting tool for bass guitars and it works similar to the products Nordymute or Gruvgear Fump. It is intended to play permanently muted like for example James Jamerson often did without having to palm mute the strings. theFump…

Downloads
95
Likes
25
Rating
0
P
PrintablesAvel

Damper/Riser Feet for CR-6 se or Ender 3

Designed to be printed with TPU. There are 2 versions, one is 32mm tall the other is 46mm tall. You will need to print 4 of either. Print Settings Printer: Creality CR-6 se Rafts: No Supports: No Infill: 10 Filament: Priline TPU Black…

Downloads
95
Likes
18
Rating
5
P
PrintablesShawinkle

Ender 3 Squash Ball Damper Feet

Just wanted a smaller version of my tennis ball damper feet. I choose to use squash balls. I've bought basic ones at a sports accessories supplier, just here . M3 6mm screws / 20S-M3 nuts

Downloads
93
Likes
19
Rating
0
P
PrintablesDanW

Bambu Carbon X1 Feet damper

Feet damper for Bambu Labs X1. Printed in TPU, layerheight 0.2 and no support.

Downloads
91
Likes
13
Rating
0
P
PrintablesKristian

(Extra) Low-Level Heatbed Standoffs / Dampers / Leveling Colums / Spring Replacement for the ELEGOO Neptune Heatbed springs

The existing springs on my ELEGOO Neptune 4 Pro printer have been quite crooked / bent. For better stability I always tried to keep them as low to the bed as possible, but the maximum compression led to a quite uneven bed. For other…

Downloads
91
Likes
16
Rating
0

Round Corner Damper Box Protector

The 3D printed corner damper is ideal for use in applications where traditional dampers cannot be easily installed, such as in tight spaces or on irregularly shaped structures. It can be customized to fit the specific dimensions of the…

Downloads
90
Likes
12
Rating
5
P
PrintablesAndreas Otto

Washing Machine Vibration Damper

I printed it with 40% gyroid infill, works really well and decouples our washing machine from the floor.

Downloads
89
Likes
13
Rating
5
P
PrintablesBen White

Ender 3 - Z-Axis Stepper Damper Adapter

After installing a BLTouch on my printer, the bed leveling process highlighted its need for a z-axis stepper damper. I searched around, and was not satisfied with anything I found. So, I created a model of my own. The only downside of…

Downloads
88
Likes
17
Rating
0
P
Printableslayer.shifted

Neptune 4/4pro Nema17 Stepper Damper mod

This mod and the associated printfiles will give a quick explaination on how and why to install Stepper Dampers to Neptune 4 Series Printers. Included Printfiles are to offset the y Limit switch on Neptune 4 and 4pro - otherwise the bed…

Downloads
88
Likes
32
Rating
5
P
PrintablesAfterschnitzel

Prusa Mini damper feets

I made this because of poor stability on foam feet. Print 3x prusa_mini_damper_feet_3x.stl Print 1x prusa_mini_damper_feet_back_1x.stl Print 1x 5th_feet_Z_support.stl Use M5 screws to fit it in profiles. And I used this silentblocks as…

Downloads
87
Likes
20
Rating
0
P
PrintablesBen White

Ender 3 - X-Axis Stepper Damper Adapter

I had been searching for a simple way to add a damper to my x-axis stepper motor, but I couldn't find any that I was excited about. This adapter is as simple as I can make it. Benefits compared to other options Simple to install No…

Downloads
86
Likes
15
Rating
4.67

Rotary Damper v1.0 for Mark Ayton's Speedbrake and Flaps mechanism for A320

I could not find the Rotary Damper on the Market or only for high prices. So I created this part myself. Additional material: What you need is an O-ring with 8 mm and 1,5 mm thickness as well as silicone oil. I used a viscosity of 30000…

Downloads
84
Likes
5
Rating
0
P
PrintablesNautilus Forge

MMU2S Buffer Bottom Mount compaptible with SquashBall Vibration Damper V3.0

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
83
Likes
15
Rating
5
P
PrintablesAaronLK

Ender 3V2 Damper Feet (Soft Springs)

Version 2 available: Ender 3V2 Damper Feet (Soft Springs) von AaronLK As far as I can remember my engingeering-courses the machine should sit on springs as soft as possible to reduce vebrations from/to the environment. Standing on a IKEA…

Downloads
83
Likes
26
Rating
0
P
PrintablesLuca Koch

Vibration damper

Strong vibration damper for speaker/subwoofer

Downloads
83
Likes
7
Rating
0
P
Printablescheapo

RC FXT Ravine Damper Mount Extension

These will raise your ground clearance by approx 10mm, and allow maximum axle articulation on both sides. More than90 degrees! Should also work on Danchee Ridgerock and Pirate Swinger 0.1 layers 100% infill 220C for the filament 70C for…

Downloads
83
Likes
3
Rating
0
P
PrintablesJEBurroughs

Voxelab Aquila / Ender 3 Y Axis Motor Mount for Damper With Cooling Options

July 13, 2022 UPDATE: I Converted my Ender 3 Pro to a V2. This worked perfectly on it as well, and should work for any Ender 3 style I would think. Voxelab Aquila Y Axis Motor Mount for Damper With Cooling Option "USES THE ORIGINAL…

Downloads
82
Likes
14
Rating
0
P
PrintablesChris Chauvin

Air Vent Damper Key

Replacement tool for ceiling diffusers to allow for opening and closing the damper inside in order to control air flow. Fusion360 file included to allow for adjusting any dimensions.

Downloads
82
Likes
10
Rating
0
P
PrintablesPeter Eichler

TORQUE DAMPER V3 - C05-T_Mod by Peter

more stable version; printed in TPU, as hot as possible; layer hight 0,2; use 10 wall thickness; no infill

Downloads
81
Likes
4
Rating
0
P
PrintablesDaliaDesign

Prusa MK3/S/S+ Vibration Damper

Print instructions Printed with Recreus Filaflex TPU filament (82A Shore). Filament settings in PrusaSlicer "Generic FLEX", bed heating is not required. Infill 10-15%. To protect the PEI surface, use a hairspray/printer varnish or glue…

Downloads
80
Likes
14
Rating
0
P
Printablesandy

JGAurora A5 Vibration Dampers

Remix of the CR-10 Vibration Dampers with a smaller diameter of 23mm, matching the rubber feet of the JGAurora A5. Tolerances allow for easy assembling. These PLA vibration dampers help to significantly reduce printer noise, and in my…

Downloads
80
Likes
8
Rating
0