Search results: damping

Sort order

70 models

P
Printablessmogan71

TPU Vibration damping feet for Anycubic Kobra 2 Pro

ENG: Simple feet for the Anycubic Kobra 2 Pro . Made for printing in TPU for vibration dampening. The feet are a snug fit around the feet the printer comes with. There is also a hole in the middle for fixing the feet to the table. Small…

Downloads
768
Likes
79
Rating
4.75
P
PrintablesLebkuchen

Ender 3 S1 Pro Damping feet

This is a remix of a remix of a remix of... redesigned to fit the Pro S1 and stay a little better in place.

Downloads
483
Likes
93
Rating
5
P
PrintablesJorge

Vibration Damping For Any 3D Printer and speakers

A very long Introduction … I present to you my suggestion for vibration damping for any 3D printer. There are many systems that try, and indeed reduce vibrations, but not all systems are efficient, or even applicable to all contexts. Many…

Downloads
476
Likes
216
Rating
5
P
PrintablesRaumwerk Vogler

Damping feet for Anycubic Kobra Max

Bottom, Top & Walls strength and height 2mm Infill: 15% Gyroid in Cura Filament: Geeetech TPU A95 Printsettings: 80/220 Celsius, Printspeed 60mm/s The first one was printed standalone fpr testprint, everythings ok. Meanwhile I print 5 in…

Downloads
351
Likes
40
Rating
5
P
Printableswbphelps

Bambu X1 vibration damping foot

I love my X1C but it is noisy! A lot of the vibration gets conducted via the feet into the shelf it sits on, and thus into the floor. Not so much a problem during the day maybe, but at night it was a real problem. I tried a bunch of…

Downloads
246
Likes
79
Rating
5
P
PrintablesNikosSprocket

Anti-Vibration Shock Absorber Damping Plate for MATEKSYS H743-SLIM Flight Controller (Updated)

FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…

Downloads
222
Likes
18
Rating
0
P
PrintablesGreenBit

Damping feet For Kobra 2 Pro / Kobra Series

These 3D-printed feet are designed for the Anycubic Kobra 2 Pro printer, but they are compatible with any printer from the Kobra series. They are made of PLA, a durable and eco-friendly material. The feet help to reduce vibration and…

Downloads
209
Likes
28
Rating
5
P
PrintablesBrill

Bambu Lab Universal Damping

Practical universal damping, friendly neighbor : ) . Print parameters. Print with 8 layers of walls. 100% filled. It is recommended to stick anti-skid on the bottom

Downloads
143
Likes
35
Rating
0
P
PrintablesMr.Crab

Creality Damping Feet

These printer feet are designed to reduce printer noise by dampening vibrations caused by the motors. The micro vibrations produced by the printers can cause the surface it is placed on to vibrate, resulting in a louder printing…

Downloads
134
Likes
21
Rating
5
P

Anycubic TPU damping feet

Use concentric infill. One perimeter with a 0.8 nozzle, 2 perimeters with a standard 0.4. FAN turned ON for the cylinder on the top of the model.

Downloads
119
Likes
9
Rating
5
P
PrintablesEstep

Silicone damping feet with adjustable height. Geeetech A10, Creality Ender 3 etc.

These feet fit on 3D printer with 40 mm aluminum extrusions like Creality Ender 3 or Geeetech A10. For the silicone parts I used 2-component silicone from "Troll Factory" (Germany) which I also used for some silicone socks and heatbed…

Downloads
99
Likes
17
Rating
5
P
Printablesdantech

Ender 3 Damping Feet

Ender 3 damping feet with increased thickness. Category: 3D Printing

Downloads
94
Likes
10
Rating
4
P
PrintablesDrGarbinsky

Damping rod holder for KYB cartridges

IF you are servicing 48mm KYB forks you'll need someting like this to hold the components in the vice

Downloads
76
Likes
10
Rating
0
P
Printablesnrth3rnlb

MK2 squash ball damping foot

You need 4 (four) two yellow dots squash balls Adjustments are relatively easy because the FreeCAD file is provided

Downloads
75
Likes
15
Rating
4
P
PrintablesDrGarbinsky

H tool KYB damping rod holder

Simple tool, print in 100% infill. Or you can buy something like this :

Downloads
70
Likes
4
Rating
0
P
PrintablesFYN

Damping feet

Quieter & cooler! Elevate your 3D printer for airflow and reduce vibrations/noise with these easy-to-print feet.

Downloads
66
Likes
17
Rating
5
P
Printablespcgeekesq

Prusa Core One vibration-damping legs, Short and Very Short, with TPU bottom and core, no supports needed

These legs come in two length and bolt into the two existing 3mm threaded holes on the bottom of the corners of a Core One. There are two versions: short (adds about 26mm of height) and very short (add about 16mm). Replaces or supplants…

Downloads
65
Likes
16
Rating
0
P
PrintablesLiberty4Ever

SV08 Vibration Damping Feet

The Sovol SV08has four hard rubber feet that aren't particularly good at damping vibration so I made some pads that can be placed underneath the SV08 feet with no tools needed and no modification to the printer. The pads raise the SV08 15…

Downloads
62
Likes
4
Rating
0
P
Printableswoelpi

Prusa XL vibration damping feed

I really liked the idea of putting better vibration absorbing feed under the XL. Instead of putting the foam pads under the existing TPU-feed like Extrutim, I designed a simple holder for the same foam pads. These are the foam pads I…

Downloads
61
Likes
20
Rating
5
P
Printables93djen

Damping foot - Voron 2.4

I experimented a bit with the feet of my voron 2.4 printer and my latest design consists of 2 parts: a harder outer shell for stability (PETG) and a damping inner part from TPU. The hard shell can be mounted to the frame easily. The TPU…

Downloads
43
Likes
6
Rating
0
P
PrintablesKire Zezo

Prusa Bear (Vibration Damping)

It can be used on machine using 30x30 (or 20x20) profile extrusion frames. I used on prusa mk3 bear frame it's very good you can use 4 (2left 2 right) or 8 (2left 2 right 2 upper and 2 down) for better performance. Also need PU Foam Golf…

Downloads
42
Likes
11
Rating
0

Vibration Damping Mechanism

This is what I call a zero gravity mount as it floats, isolating the top from the bottom and dissipating the vibrations produced in all axis. There are several models loaded in various sizes. The one that has a hole in the middle which…

Downloads
41
Likes
15
Rating
0
P
Printablesprintingbuddy

Damping feet for ITEM 2020 profiles

I wanted the stand to be stable and not slippery, and I also didn't want the profiles to get scratched. That's why I made these end caps for the damping. They are needed four times and I used some self-adhesive ~ 8 mm diameter ones ( for…

Downloads
40
Likes
0
Rating
0
P
PrintablesTG Kang

Printer Vibration Damping Base

Applied a shape to solve the problem of sinking when supported for a long time

Downloads
40
Likes
4
Rating
0
P
PrintablesIost

Noise-Damping Connector – Spider Farmer 4" Carbon Filter <-> 4" Fan

This part is a noise- and vibration-damping connector designed to connect a Spider Farmer 4-inch carbon filter with a Spider Farmer 4-inch inline fan . The connector is printed from flexible TPU filament , allowing slight elasticity for a…

Downloads
39
Likes
9
Rating
0
P
PrintablesBidi01

Vibration Damping feets for CR10

Vibration damping feet for the Creality CR10 series. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Innofil Innoflex 45 Silver Notes: Any material flexible material…

Downloads
36
Likes
4
Rating
5
P
PrintablesDampmaskin

Ultimaker Original sound damping foot

A small sound damping foot for the Ultimaker Original and Original+. Probably fits UM2 too. Prints fast, uses little material. Instructions Designed in FreeCAD. Cleaned up in Meshmixer. Printed on an UMO+ in PLA with 0.25mm layers. Put it…

Downloads
35
Likes
1
Rating
0
P
PrintablesfmMike

Anycubic Chiron Spring-based Damping Feet

Saw this design on a YouTube channel ( https://www.youtube.com/channel/UCkXj9_80x1PquHxWZtT-6Hg check the videos abtout the Chiron - cannot remember the exact one...) a couple of months ago and decided to design the feet myself to get…

Downloads
35
Likes
5
Rating
0
P
Printablescallofmarty

Prusa i3 MK3s Vibration damping feet

In the pictures you can see printed medium sized feet. Fits perfectly on original prusa feet. Print Settings Rafts: No Supports: No Resolution: 0.2

Downloads
34
Likes
2
Rating
5

Spacer Xiaomi 365 (Damping rubber)

Strut for xiaomi 365 scooter or analog. 2 files, 0.8 mm and 1 mm

Downloads
33
Likes
1
Rating
0
P
Printablesjanvdg

noise damping

After working for almost one year with the super silent Prusa MINI, I bought the MK3S for bigger parts. I found it to be a lot more noisy, even in silent modus. Like some I tried putting a concrete tile underneat and even a rubber mat,…

Downloads
29
Likes
9
Rating
0
P
Printablesdan IO

Damping feet for Honeywell TurboForce fan

Honeywell's TurboForce fan can produce a lot of annoying noise because it is poorly decoupled from the surface. It only has two small rubber feet, which are unable to absorb the vibrations effectively. This simple design, printed with…

Downloads
25
Likes
2
Rating
0
P
PrintablesAlgol

Adjustable Damping Feet

The damping works at its best if you have both the damping feet and a foam (like the one from the tarantula shipping box) under it. This way the vibrations transmitted to the base is really limited. I've added the possibility to adjust…

Downloads
25
Likes
0
Rating
0
P
PrintablesHespoHusky

Damping Feet for Synology DiskStation

Damping foot for Synology DiskStation to isolate the HDD sounds from the rest of my house

Downloads
24
Likes
0
Rating
0
P
Printablesdocmech

vibration damping foot Prusa i3

Can be used as a replacement or parallel to the original ones. As if there were not already enough feet, here is another soft and squishy variant. Printed in TPU, 100% infill. After half a year of use, my rear ones have sunk in a bit. I…

Downloads
24
Likes
1
Rating
0
P
PrintablesJaakko Sairanen

Gemilai/Turin Legato 58mm damping station

Damping station for the original 58mm portafilter that comes with Gemilai/Turin legato espresso machines. Fits tight and holds the portafilter securely in place.

Downloads
23
Likes
1
Rating
0
P
PrintablesCaptain Basil

Neck Damping Rubber

i made this because i didn’t want to modify my frets and also wanted to reduce noise, so i added rubber on the upper part of the neck housing. it’s printed in TPU, and i recommend a 0.12 mm layer height since the bottom is 0.36 mm

Downloads
20
Likes
3
Rating
0
P
Printablesrobo

Vibration Damping Feet

Vibration Dampening Feet This model uses rubber stoppers to dampen vibrations between the printer and work surface. - Easy twist-in or M5 T-nut versions - 2020 and 2040 (etc.) compatible - Glue not required - Keeps printer stationary. -…

Downloads
20
Likes
2
Rating
0

Vibration-damping Riser Feet for Replicator 2 (SCAD)

These are parametric riser feet for a Makerbot Replicator 2. I don't know if they fit the other Replicator models, but they're parametric, so I'm sure you could make them fit. Included are two STL files, one for 45mm height (as shown) and…

Downloads
19
Likes
0
Rating
0
P
PrintablesBratwurst88

Damping feet for Philips EP5310/10 coffee maker

we put the coffee maker (https://amzn.to/3GntakU) on a tray (https://amzn.to/35ThLwH) to save our wooden furniture. However, the problem was that the coffee machine rattled at the edge of the tray and was slightly tilted. so i designed…

Downloads
17
Likes
3
Rating
0
P
PrintablesNot much here

BambuLab X2D vibration damping feet

Vibration damping feet to fit a BambuLab X2D. You will need four of them. Nothing complicated, just some TPU feet for the X2D. Designed to fit around the factory feet, and provide a bit of damping and some extra height. No extra parts…

Downloads
17
Likes
0
Rating
0
P
PrintablesXargas

Toilet seat repair - elastic damping

There a two models, one with smaller top and one with bigger top for different seat parts. I printed with PLA and TPU, both worked. As expected the TPU is softer for the seat :)

Downloads
17
Likes
3
Rating
0
P
Printables@doegox

Nikko Barracuda X front damping rods

Replacement dampening rod for the Nikko Barracuda X ( http://www.toystate.com/our-toys/nikko/barracuda-x/ ) RC car as apparently the manufacturer doesn't propose replacement parts for its "cheap" models. I willingly increased the features…

Downloads
15
Likes
3
Rating
0
P
Printablesrb

Compression Damping Knob for Manitou Skareb Elite Shocks

Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…

Downloads
14
Likes
2
Rating
0
P
PrintablesMooseBoys

Vibration Damping Sorbothane Bushing Extrusion Adapter

These parts allow attaching a sorbothane bushing + washer assembly to a 2040 aluminum extrusion. The base is designed to fit in the Prusa Box steel U-channel slots as a replacement for the squash ball bases.

Downloads
13
Likes
6
Rating
0
P
PrintablesMDV Revolution

Universal TPU bushing for vibration damping between mechanical or tubular frame joints

Universal Anti-Vibration Rubber Flexible TPU bushing for connecting and damping joints between tubular frames or bars. Compatible with buggy frames, trusses, and various mechanical mounts. Print settings: Material: TPU 95A Layer height:…

Downloads
12
Likes
2
Rating
5
P
Printablesrizzi

Damping Anti Noise Feet

The 4 holes are for 3mm screws. Print the foot, then fill it with self-leveling silicone. (I use this: AREXONS MOTORSIL D).

Downloads
12
Likes
2
Rating
0

PRUSA Feet & Vibration-Damping CORE One+ / INDX

🇬🇧 English version PRUSA Feet & Vibration-Damping CORE One+ / INDX I designed these new feet specifically for the Prusa CORE One+ . My goal was not simply to raise the printer slightly. I also wanted to reduce the noise and vibrations…

Downloads
11
Likes
5
Rating
0
P
PrintablesMartin Prenger

Prusa Enclosure damping extension bracket

The problem As the proud owner of an original Prusa Enclosure and MK4s, I felt that the vibrations caused by the printer movements weren’t handled very well by the feet of both printer & enclosure. I was inspired by the solutions provided…

Downloads
10
Likes
1
Rating
0
P
Printablesdestulp

Damping Wheel for swivel castor

A damping roll for a swivel castor (ca 80mm outer diameter) Printes wirth some modifyers, see modifyers in mf3.

Downloads
10
Likes
4
Rating
0
P
PrintablesThe Barça Guy

Vibration Damping Foot

it uses a compliant mechanism to muffle almost all vibration note: it must be put under a pre existing foot as this one can not be attached

Downloads
10
Likes
2
Rating
5
P
PrintablesProto Printing

Mute — Progressive Vibration Damping Feet (TPU)

The body is a lantern spring: ten vertical leaves in a barrel-shaped wall. Under a light load the leaves bow outward and the foot stays soft, so vibration gets absorbed instead of travelling into your desk. Load it more and the leaves bow…

Downloads
10
Likes
1
Rating
0
P
PrintablesDaveT319

Ender 3 Damping Feet w/ Internal Spring

These damping feet by redmaxver ( https://www.thingiverse.com/thing:2913473 ) have done a great job of damping the vibration and sound on my Ender 3 V1. But then one of them broke after just a couple weeks from sagging under the weight of…

Downloads
9
Likes
1
Rating
0
P
PrintablesAlgol

Damping spine for large windows - 12mm hole

a simple damping spine used for a large windows which has 12mm hole; I've used a thread to have better fitting. Print in tpu with low walls and very low infil so to be soft.

Downloads
9
Likes
1
Rating
0
P
Printablesaxxel39

Damping mount for Gaggia Classic Invensys pump.

Printed in TPU A95. Walls - 3 Top/bottom - 3 Nozzle - 0.4 Height - 0.3 Width - 0.5 Use longer screw and wide flat washer to mount damper in place.

Downloads
8
Likes
1
Rating
0
P
PrintablesAnkkuriukko

Furniture riser / damping pads

Printable riser and damping pads for furniture. The model is designed to be printed from a flexible material such as TPU , providing effective vibration damping and floor protection. Alternatively, the model can be printed in a rigid…

Downloads
8
Likes
1
Rating
0
P
PrintablesLuomo

Voron Trident squash damping feet/沃龙 三叉戟 壁球 减震脚 replacements for the rubber feet 25mm

用起来晃来晃去的,很好玩:D。加标志,降高度use40mm ball .Added the voron logo. Reduced the overall height and lowered the overall center of gravity of the printer!

Downloads
5
Likes
0
Rating
0
P
PrintablesChristian

Mob4us Mobius2 adaptor for Anycubic 4max and 2020 profile with integrated damping

this is an adaptor for the mobius2 extruder from the Voron-Project ( https://github.com/mzbotreprap/VORON ) adapting to the Anycubic 4Max it fits to the original mounting holes from the filament sensor you can use 1 of 2 options: Version…

Downloads
5
Likes
0
Rating
0
P
PrintablesJaegermeister

Motorplate damping

I had some vibrations in the motorcompartment. Irritating!!! Turned out to be the damping from the plastic motorcover. So took the bad one of and design a new one in Fusion360. Printed it out. Vibartion gone. :-) If you have the same…

Downloads
5
Likes
0
Rating
0
P
PrintablesfunctionaLayer

AstroFlex TPU Vibration Damping Feet

AstroFlex is a set of vibration damping feet designed specifically for reflector telescope tripods. The internal suspension lattice allows controlled elastic compression under load, reducing micro-vibrations caused by focusing…

Downloads
4
Likes
3
Rating
0
P
PrintablesDanielDo

DampingFeet_GtOmegaPro

Printed in TPU V2 from Das Filament. Absorbs vibrations from strong direct drive steering wheels for sim racing.

Downloads
3
Likes
0
Rating
0
P
Printablesmpdue

Bosch CX 2nd Gen Dämpfungsfolie 0,4mm zweiteilig (damping film two Parts)

Ersatzteil für Bosch CX 2nd Gen. gedruckt mit Flexfill 98 A. 100% infill. Sparepart for Bosch CX 2nd Gen. printed in Flexfill 98A. 100% infill.

Downloads
2
Likes
0
Rating
5
P
PrintablesDan G

Motorcycle Fork Adjuster Knobs – Tool-Free Preload & Damping

Tired of carrying a wrench and a screwdriver just to tweak your suspension? These caps press onto your front fork adjusters and turn them into hand knobs. - Preload cap – fits over the 14 mm preload adjuster nut - Damping cap – fits the…

Downloads
2
Likes
1
Rating
0
P
PrintablesDschuli

Press-fit Foot + TPU damping pad for TwoTree TTC3018Pro CNC Router

Two models - each to be printed 4 times: The foot to be press-fit attached to the lower aluminium profiles of the TTC3018Pro. Use slicer sizing if the fit is too tight or loose. Standard print in PLA or PETG. Support recommended. Use…

Downloads
1
Likes
0
Rating
0
P
Printables

Damping feet

Quieter & cooler! Elevate your 3D printer for airflow and reduce vibrations/noise with these easy-to-print feet.

P
Printables

Prusa Core One vibration-damping legs, Short and Very Short, with TPU bottom and core, no supports needed

These legs come in two length and bolt into the two existing 3mm threaded holes on the bottom of the corners of a Core One. There are two versions: short (adds about 26mm of height) and very short (add about 16mm). Replaces or supplants…

P
Printables

Damping Feet for Synology DiskStation

Damping foot for Synology DiskStation to isolate the HDD sounds from the rest of my house

P
Printables

AstroFlex TPU Vibration Damping Feet

AstroFlex is a set of vibration damping feet designed specifically for reflector telescope tripods. The internal suspension lattice allows controlled elastic compression under load, reducing micro-vibrations caused by focusing…

P
Printables

Vibration Damping Foot

it uses a compliant mechanism to muffle almost all vibration note: it must be put under a pre existing foot as this one can not be attached