274 models
*NEW: The original .blend file added for easy edit of the model Original design from Cas van de Pol . I made a model of the dancing toothless meme of tiktok No specific printer specifications Better resin 3D printing for the smooth surfaces
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
I find the Toothless dancing meme very funny, and since there are no 2D drawings of him yet, I created one myself. You can find the meme here , and the original video here .
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Enjoy this new dancing sausage dog. There is never enough of sausagedogs. I would recommend to put some small cicular support under the left foot to give it little bit more stability if needed.
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant
A jerry bear keychain that I made for my uncles birthday present. I figured that I'd upload it here because why not Add layer pause at 9 to change filament colors I printed with the Ankermake m5c and turned on ironing, the jerrybear was a…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
I love how relaxed I feel whenever I spin my fidget. Then it hit me — why not make something dance around while it spins? So here’s what I came up with: a remix model with dancing foxes that twirl as you spin! 🦊💃 The model is separated…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
A spinning ballerina with a skirt created using strings. Print at 0.28mm layer height and if using Bambu Studio set your wall generator to Arachne. Be gentle when loosening the skirt pieces from the bed. When removed from the bed gently…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
моделька с отдельной головой и местом под пружинку от шариковой ручки
This is a remix of @Macroglossum's dancing fox model with the addition of a tray to serve as a ring holder I added a pair of 1.75mm bores to the legs to trigger the slicer to generate reenforcement I have a few other similar remixes: Cute…
Super easy to print, supportless model. I would highly suggest to print with SILK filaments for best final look.
Remixed version of my dancing bride and groom. I sticked them together so that they are printable as dancing couple. Bride: https://www.printables.com/model/80591-bride-187-scale-h0 Groom:…
Introducing the newest addition to my series of low-poly, easy-to-print models – the Low Poly Dancing Fox! This delightful figurine captures a cute fox in a playful dance, standing on its front paws with its tail joyfully raised high in…
why my dancing skeleton has been deleted
BANDIT - WAVING - BLUEY - WALL ART
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Easy to make a cute Unicorn dancing keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Articulated grateful dead dancing bear. There are two versions. One has a keychain loop on the head, the other does not. This model does not require supports nor a brim. As for scaling: I suggest looking at your slicer output to determine…
Video of the make The Supportless Cute Dancing Fox Figurine created by Macroglossum is now available for 3 color printing on bambustudio! Follow me on Instagram / TikTok / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy…
Hope you like it!! PERFECT GIFT FOR GUARDIANS OF THE GALAXY FANS - Ideal for parties, birthdays or special occasions, this exclusive figurine is a must-have addition to any Guardians of the Galaxy merchandise collection. EXPAND YOUR…
No Supports Print with 0.6mm nozzle for fastest quality prints.
Does not need supports, stands well on its own!
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Edit: revised “ring Lock” clearance “Crazy Legs” The Dancing Mechanical Crab This is an articulated Crab that Dances (Moves it's Legs) when you move the lever in the back left and right. This model was harder than my last “mechanical”…
Introducing an elegant abstract figurine, a beautifully designed modern sculpture that embodies simplicity and sophistication. With its flowing curves and minimalist design, it stands as a symbol of grace and creativity, making it an…
This is the very first interactive version of Makey the robot! (aka. Maker Faire robot) that can walk and dance, based on the same mechanic principle of Otto DIY robots. Inspiration From my experience making interactive robots, it is an…
This articulating flexi fidget tap dancing drama robot (named after Fred Astaire) is best printed at 140% scale for optimal bed adhesion. Fred will still articulate at 100% scale, but I found bed adhesion to be a problem without brims.…
Hi I created for you a figure of your favorite marvel hero groot. He is depicted reborn dancing in a flower pot. It's a great decoration for all movie fans and also a great gift. When printing, use the supports. Print with the highest…
Dancing Snoopy designed with the help of AI. Prepared for handpainting
Ein tanzendes Paar - perfekt für Valentinstag, Hochzeit oder sonstigen Anlässen. Höhe: 10 cm A dancing couple - perfect for Valentine's Day, wedding or other occasions. Height: 10cm
Despite looking quite hard to print I was able to print it without any supports on my Ender 3 and it came out quite great. But i would suggest not to scale it down on FDM printers.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A Greek-inspired female marble statue. Tree supports recommended. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Dancing Coffin Dudes toy, not responsible for Astronomia ear worm. Print instructions Case-Base.stl, need (1) Case-Cover.stl, need (1) Coffin.stl, need (1) Dude-Body-with-Left-Peg.stl, need (3) Dude-Body-with-Right-Peg.stl, need (3)…
The source marked this model as adult content.
Dancing Benchy Attention overhangs can be difficult to print
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Saraswati (IAST: Sarasvatī) is the Hindu goddess of knowledge, music, art, speech, wisdom, and learning. She is generally shown to have four arms. The four hands hold items with symbolic meaning. The book she holds symbolizes the Vedas…
Dancing Banana : Peanut Butter Jelly Time.
Summary: Grateful Dead Dancing Bear Magnet (1 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill,…
A great Wall Art of dancing skeletons. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin and tricky, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
ENGLISH description: Dancing nymph figure model. Painted with spray and scaled up to maximum height for my Prusa MK3. (ca 18cm tall) Printing instructions: ■ Steel sheet ➔ at your own preference (textured PEI for PETG material) ■ Nozzle ➔…
A Greek-inspired female marble statue. Tree supports recommended. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Print at approx. 0.3mm layer height with detect thin walls checked
Color order: White, Black. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…
Summary: Grateful Dead Dancing Bear Magnet (2 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill,…
Summary: Grateful Dead Dancing Bear Magnet (4 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill,…
Works best on a printer with good resolution to allow the hearts to slide freely when printed. Mine slide right away once the brim is removed. I printed the pendant at 0.2 mm layer height with an outer brim to keep the small pieces in…
Summary: Grateful Dead Dancing Bear Magnet (5 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill,…
Let Your Rings Dance with This 3D Printed Ballerina! Tired of tangled rings and overflowing jewelry boxes? This elegant ballerina ring holder is here to save the day (and your fingers)! Designed for easy home 3D printing, this charming…
"Dancing Woman" 2D Wall decoration Use only one perimeter for optimal results.
Summary: Grateful Dead Dancing Bear Magnet (3 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill,…
Dancing girl Sculpture , just slice and print
Here's my very first model. It's just a simple but effective silhouette from the movie Dirty Dancing.
El Chombo : Dancing Green Alien
One of my favourite cartoon characters Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made…
Simple to print, you dont need a multi colour AMS or MMU unit . All you need is black and white filament. This will print in any FDM printer capable of printing 0.08 layer height. This filament painting is created with Steve Lavitas'…
Heads Color with Acrile colors after print or print with MMU. Or check my Dancing Smiley model: https://www.printables.com/model/135691-dance-and-smile
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Dancing night fury Toothless from tiktok memes. The legs rotate.
FDM 3D-printable remix of Froggy Forge's Dancing Toothless meme. I've split the model into three parts for FDM printing
Dancing Sword Requires Attunement You can use a Bonus Action to toss this magic sword into the air and speak the Command Word. When you do so, the sword begins to hover, flies up to 30 feet, and attacks one creature of your choice within…
A stylized fox stands on hind legs to see into the distance. Minimal Supports required. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A cute cartoon hippo wearing a ballet tutu, standing on tiptoes.
I made this model based on the viral TikTok meme of Pibbles, the adorable little pitbull surfing and dancing on his board! If you've seen the meme, you probably already have "Just The Way You Are" by Milky stuck in your head. Pibbles has…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
Give your loved ones a Christmas fairy tale!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
. If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
I remixed these earrings from Tresido's “PENDIENTES/PIN ELVIS PRELEY” on thingiverse. If you would like to check out the original file you can click here: https://www.thingiverse.com/thing:2385962 I'm sure whoever you give them to will…
Dirty Dancing - Johnny Castle - 1987
Mongolian Buddhist Dancing Citipati Deities The citipati are the lords of the funeral pyre and charnel or burial grounds, and are the skeleton companions of Yama, the Lord of Death . And yet, they are intended to be humorous or comic…
Part of the Eternal Embrace series: a dramatic dancing dip pose with the couple locked in a romantic moment. Flowing fabric shapes add motion and elegance, making it a perfect gothic-romance centerpiece for weddings, anniversaries, or…
my fiancé loved the fox ring holder, but I have more rings than her so I remixed with more tails for my rings.
🦛 Dancing Hippo – Cute Yoga Pose Figurine (OMMO Original) Bring a little calm, balance, and pure joy to your print bed with this adorable dancing hippo ! 🧘♂ Supports are needed. I used organic-style supports, which peeled off cleanly with…
Dancing couple valentine day statue
Another masterpiece :) in two variants. Print instructions Category: Decor Summary Another masterpiece :) in two variants.
Scale to any size you need! Perfect giveaway item and looks good in GLOW! Check out my other SPOOKY GHOSTS! Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
You love the dancing penguin emoji? Great! Then build your own dancing penguin! All the motion is driven by one cheap stepper motor and an arduino! No need for servos. Here is what you will need: 1x Arduino Nano 1x 28BYJ-48 with ULN2003…
A kitcard with a spinning top. Spins 10 - 15 sec for me. No special settings, 0.2 layer height, 0.4 layer width.
a cookie cutter with a dancing reindeer printed in petg with 0.2 layer have fun
Cute Baby Groot 3D-Print with dancing motion!
Daisy Duck dancing Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
The model consists of 4 printed parts (body, jacket, skirt and pin). You also need a magnet D8x4mm. Everything moves smoothly with no resistance . Assembly (also see photos) : remove all possible strings slide pin into the skirt slot…
Assembled the model into one piece and painted for MMU/AMS prints.
I designed this model is for my character in my next 3.5e D&D campaign., a female half-elf Beguiler who works as a tavern dancer. The model address one problem I've had with minis: when supported just by their legs, the weak ankles that…
3D printed version of the dancing triangle figure meme from a couple of years ago. The original 3D model was made by charlesavila626; Its position was changed from the original blender file T-Pose to the dance it has in the video. I also…
Capture the rhythm of romance with "The Waltz of Love." This striking 3D printable sculpture depicts a couple swept up in a dance, with flowing lines that create a sense of movement and elegance. The design features embedded heart motifs…
Capture the legendary moonwalk magic with this incredible 3D printable figurine that brings iconic dance moves to life on your desk! This meticulously detailed STL model showcases the famous hat-tipping pose and smooth criminal stance,…
![Ganesh Dancing the Tandava [Easy to Print Filament Painting]](https://media.printables.com/media/prints/597559/images/4757955_b995a15e-6a21-4159-b044-dba25d6511eb_90819f33-290d-4465-a4d3-a1c52dfcb4db/rt-1.jpg)
