22,212 models
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
A very nice F1 logo for your desk or shelf. The logo and its stand are designed separately, so you can print it in 2 colors. The parts are snap-on in order not to have any problems with alignment. But my advice is to glue the pieces…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant
Ghost Emoji Decorations! I hope you all have a spooky yet happy Halloween this year with these super cool Emoji Ghosts! Version 4 - 24/09/2023: Updated STL Files released. Added a thicker base for each 'foot' of the models, making it much…
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Print approx. €22.38–€27.35 excl. taxPreliminary estimate for one variant
Wolf Decor. Happy printing. With more and more questions popping up about the commercial use of my models, I’ve set up a special page on Patreon to make it easier for you to do just that! https://patreon.com/29flo
Print approx. €4.23–€5.16 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Print approx. €9.80–€11.98 excl. taxPreliminary estimate for one variant
The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
A nice and simple wind and sand inspired wall decoration for your home. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
Print approx. €2.70–€3.31 excl. taxPreliminary estimate for one variant
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Description: Wanted to create cutout like bats decoration similar to the ones I had as a kid, however not being made out of construction paper. There are 3 different bats that I drew then made into STL's. So the edges aren't perfect,…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Print approx. €17.39–€21.26 excl. taxPreliminary estimate for one variant
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
Wanted to print a candy bowl, so I decided to go with a simple shape, and play around with the settings in PrusaSlicer to give it a cool and unique look! This print has no top or bottom layers, and no perimeters on the inside of the bowl…
Print approx. €17.31–€21.16 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
Use this wall or ceiling mount to place your TP-Link Deco M5 out of the way in an elegant manner. This model works with TP-Link Deco M5 Accesspoint ( TP-Link Deco M5 Mesh WLAN AC1300 Dual Band Home Network Complete Solution White:…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Print approx. €18.09–€22.11 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Commercial Use 'til March Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Print approx. €9.81–€11.99 excl. taxPreliminary estimate for PETGSource material: PET
I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own. Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Low Poly Howling Wolf (Scraper Holder / Decoration)
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Unlike most Vortex Passthrough models where the vortex part is inserted vertically. Here the Vortex Part is inserted diagonally through the corner, making it a more challenging print. After some prototyping and many failed prints i…
Print approx. €7.96–€9.73 excl. taxPreliminary estimate for one variant
I designed a replacement peg for my BLACK and DECKER Workmate portable workbench. The original part works just fine, however, I needed a few more as several have gone missing over the years. I tried to remain true to the original design…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Print approx. €10.53–€12.87 excl. taxPreliminary estimate for one variant
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
Print approx. €5.74–€7.02 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 0-2% Perimeters 1 No Supports needed Scale it as you like :)
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
A mother and her three babies holding a blanket so that you can store your valuables. Scale and slice the stl file or use my pre-sliced g-code file! FRAGILE PRINT! Brim Recommended.
Print approx. €6.43–€7.86 excl. taxPreliminary estimate for one variant
Little Friendly Dinosaur that wants to help hold your tiny things with its tiny arms. Can hold rings, bracelets, necklaces. Or maybe it just wants a hug… Brim Recommended
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Hier eine Tischklammer bzw. Halter für Tischdecken, die hoffentlich länger halten als die gekauften, welche nach dem 2. Mal anbringen schon zerbrechen. Gedruckt mit PLA+; das ist einerseits relativ elastisch und andererseits ziemlich zäh.
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
Needed something beyond the flimsy holder that came with my StreamDeck. After searching and not finding anything I liked, I took some inspiration from a few and designed my own.
Print approx. €14.68–€17.94 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
Print approx. €9.33–€11.41 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €15.81–€19.32 excl. taxPreliminary estimate for one variant
Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Print approx. €1.44–€1.75 excl. taxPreliminary estimate for one variant
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Print approx. €5.43–€6.63 excl. taxPreliminary estimate for one variant
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Incense stands. The first version is more loose and the second one is a tight fit one. Both fit the same regular sized incense sticks. Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for one variant
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
Print approx. €9.82–€12.01 excl. taxPreliminary estimate for one variant
Wall art consisting of three types of succulent Suitable as home decoration All models is scalable for your needs. Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height 0,4 mm noozle Happy…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
I needed a spring cover for my switch boxes but due to Covid 19 all hardware stores are closed. So I created my own version of it. Print instructions The part can be printed without support structure. Printed on a Prusa Mini + with an…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Update: I have added a new version that has thinner walls. I made the inner walls angled to run parallel with the exterior walls. They are 3mm thick and should be plenty strong for normal usage. The cord sits inside much better without a…
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for one variant
Horseshoe with Horse Head – wall decoration A decorative horseshoe featuring a realistically detailed horse head, inspired by classic equestrian motifs and rustic design. This model works perfectly as a wall decoration for stables,…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
Blade Runner Deckard's Side Arm
Print approx. €11.26–€13.76 excl. taxPreliminary estimate for PETGSource material: PET
Low Poly Teddy Bear made in Blender!
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for one variant
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
Print approx. €9.04–€11.05 excl. taxPreliminary estimate for one variant
The famous twelve-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Der Deckel war vorher mit Stift und Niete befestigt, der Druck ist für eine Einschmelzhülse M3 ausgelegt, und wird mit einer Schraube M3 x 20 befestigt. Ich habe den Deckel mit PETG gedruckt.
Print approx. €2.46–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €9.40–€11.49 excl. taxPreliminary estimate for one variant
Velikost 416x407mm je třeba rozříznout nebo změnit velikost ve sliceru na 50%
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This was designed as a greetings card but also suitable as a decoration. The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer.
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Here you can find find a small jar with a threaded lid. You can print it directly without any support! At the end of the thread you can see a kink. This kink is to fix the lid when you close it, with a little force. Just try this print…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Sometimes when our trash bin got emptied, it fell aside and the peg which holds the lid breaks. This is a quick replacement part for a SULO trash bin with 120l or 240l volume, very common in germany. It's shorter than the original one but…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Slicer: PrusaSlicer 2.5 Nozzle: 0,4mm First layer height: 0,2mm Layer height: 0,16mm Infill densitiy: 10% Fill pattern: Adaptiv Cubic Generate Support material Alle exakten Slicer Einstellungen sind im .3mf File eingebettet Druckzeit etwa…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This ring is a simple tool to encode or decode text using a simple shift cipher, also called Caesar cipher. See this Wikipedia article for details. It has an additional ring with the letter numbers. The middle ring can be freely rotated,…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Can 3d print as many as you like. Request more ramps i should make and i will make them. I can make you custom ramps.
Print approx. €8.46–€10.34 excl. taxPreliminary estimate for one variant
Bulldog stilizzato silhouette wall decoration. Sono presenti 2 file, uno intero, mentre l'altro è sezionato e ingrandito del 170%
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Puppy Helper that can hold small items like keys, cards, and more!
Print approx. €11.69–€14.29 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €22.55–€27.56 excl. taxPreliminary estimate for one variant
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Here we have a customisable proclamation display, as seen in the Harry Potter series these can be mounted on the wall via nail and chain, or command strip. They can also be used as Xmas tree decorations the key part, is they are…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
You may see this in some movies or photos, this usually made out of cardboard or card stocks, people will put this up during Chinese New Year, which is around early February each year, Chinese still use the lunar year to celebrate the new…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €7.84–€9.59 excl. taxPreliminary estimate for one variant
Bold Lamborghini-inspired hood lines and vents. Roomborghini Available in two versions: Full model or half STL – for large printers. Split into 4 pieces – for easier printing on smaller build plates. Pre-sliced G-code file included…
Print approx. €8.85–€10.82 excl. taxPreliminary estimate for one variant
For pattress boxes (https://en.wikipedia.org/wiki/Pattress) these are two covers: flat cover flat cover with fitting Distance of the drill holes: 60mm Outer diameter: 74mm Printed with white PETG. 0.2 mm Quality 15% Infill
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Print approx. €7.06–€8.62 excl. taxPreliminary estimate for one variant
deckbox with toploader This box have capacity for: - 100 Double sleeved cards. - 1 Toploader (3" x 4") Slot.
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
I really liked Brett Casteels idea of press fit Bicycle spoke decorations so I decided to design my own. What started with a simple heart quickly became a template to create pixel art objects within Fusion 360. My partner used that…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
"Woman of flowers" 2D Wall decoration Use only one perimeter for optimal results.
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
When printing with 0.2 layer heights and z height at 100% (22mm) the color swaps are at 17.4mm (for base gingham color), 18.6mm (for white in gingham pattern), 19.8 (for the top pumpkin pattern lines), & 21.2mm (the stem color if…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €10.39–€12.70 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €12.90–€15.76 excl. taxPreliminary estimate for one variant
The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Meet your new butterfly army. Print this guy out and then print some more (he'd appreciate a few friends), suspend them above your precious vegetables and they will protect them from the scourge of the evil caterpillar horde. Learn about…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Two color swap options to choose from “Whole Body” version: To achieve a two color butterfly as shown in the tile picture., change filament after half of the layers to print. “Wings & Body separated ” version: Print the body parts in a…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
A convenient storage solution for your Kill Team card deck and the tokens for it. Stackable to optimize space usage during play. Use 4 5 x 1.7 mm magnets. Edit 03.08.2026: Added alternative model with magnets between the token and card…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
Dragon Decoration / Filigree
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Decorative Block Initial 'L' can be scaled to any reasonable size, easy to print.
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
Decorative Block Initial 'A' can be scaled to any reasonable size, easy to print.
Print approx. €8.66–€10.59 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €15.17–€18.54 excl. taxPreliminary estimate for one variant
Decorative Block Initial 'O' can be scaled to any reasonable size, easy to print.
Print approx. €9.79–€11.97 excl. taxPreliminary estimate for one variant
Ein einfacher Kartendeckhalter inkl. vertikalem Ablagestapel für klassische Sammelkartenspiele (wie bspw. Magic The Gathering, Pokémon oder Lorcana) im Quer- oder Längsformat. Der Halter ist für Kartendecks mit 60-70 Karten (Stapelhöhe…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
