1,767 models
Llaveros del mundial de la Copa Mundial de la FIFA México/Estados Unidos/Canadá 2026 Creo que es un llavero que será muy comercial en los próximos meses, lo bueno que se puede combinar con una infinidad de colores. Son dos tipos de…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
The great thing about an equatorial sundial is that it is spaced evenly no matter where you are on the globe, and you only need to adjust the angle at which it sits relative to your latitude, so that the gnomon is parallel to the Earth's…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Einstellhilfe für Tischkreissäge wie z.B. Metabo TS254 oder Bosch GTS 10 XC Die Grundplatte mit der Messuhr läuft mit einem Gleitstein in der Nut des Tisches. Damit kann das Sägeblatt parallel zur Nut oder der Schiebeschlitten parallel…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
Do you or your kids like to play Pokemon? Are you tired of having damage counters cluttering up your gaming surface and getting lost all over the floor? Then download and print this Pokemon damage counting dial. This dial counts in…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Backplate to install a Philips Hue Tap dial switch on top of an existing (NL) light switch in such a way that the original switch mechanism remains accessible (albeit without its plastic coverings). Similar (commercially available)…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Now that the snow is practically gone & one can enjoy hiking through the woods or park again, wouldn't it be cool to have an old fashion way of telling the time where ever you go without having to rely on a distracting phone? To learn…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Printed this in PLA but I think PETG would be a better because PLA creeps. However of the times I've used the fixture it's been fine for me. I included the STEP files so anyone can modify the model if they need to.
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
Please read this information carefully before printing! There are different clock movements and each one is designed a little differently. Therefore, the attachment methods may be different. Also, each printer is tuned a little…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
IT Ventola radiale di 20cm, con adattatore e dischetti di centraggio, per il bilanciamento dopo l'assemblaggio Consigliata e realizzata per i carrozzieri EN 20cm radial fan, with adapter for automotive and centering discs, for balancing…
Print approx. €27.35–€33.43 excl. taxPreliminary estimate for PETGSource material: PET
Read carefully before downloading the model!!! Dragon clock faces (clock dials) 20 cm / 15 cm (two colours / three colours) - set of four These clock faces may be used for a real clocks. Just add a clock movement and hands, which you can…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
🏆 World Cup 1998 ⚽ 🇲🇽 Mexico The ABA jersey for Mexico in 1998 featured the Aztec Sun Stone (Tonatiuh). It has been taken as inspiration for the 2026 jersey by Adidas. It's very easy to print in colors, even without MMU/AMS. Order of…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Read carefully before downloading the model!!! Very simple clock faces (clock dials), set of eight, two colours Model 67 has got three colours. I prepared four variants of the dial: A is round, measuring 20 cm, B is a wide oval 24x20 cm,…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
I got a DF64 G-Iota, and i was not amused by the dial indicator of v4, it is good to have one but it should not scratch the surface. This little part is printed in 2 minutes and should prevent damage on the aluminium funnel.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
I first printed W0lf92's Knob Sleeve, but quickly realized that it didn't quite work for me. The Knob did grind away my original indicator on the right frontside of my mill and also pushed down my Grind Settings Dial (v2), so it's lid…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
This only contains the gcode for doing a true multi-colour print on a Prusa Mini+ "0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers. Start with the filament for the main body colour loaded. Then…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
This is a replacement handle for adjusting the tension on a vintage Ekornes Stressless recliner. This works with the friction fitting here: https://www.prusaprinters.org/prints/82858-ekornes-stressless-friction-mating Insert a 3/8" hex…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Model of radial bearing type 608-2RS-C3 commonly used in part assemblies.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
20 cm, two colours / three colours: two variants
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Ide o organizér / funkčný stojan, ktorý je určený na udržanie zubnej kefky alebo pozdĺžnych predmetov ako sú perá, ceruzky. Je to niečo, čo si môže vytlačiť každý! Je to veľmi jednoduché. Ak si chcete organizér na zubne kefky / funkčný…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
This frame is made to follow the 2 mm thick dial and completely cover the walls of the dial opening. If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is a ship dial for a custom ship that in this case happens to be the hammer head corvette. I want to plug a few good resources since I have your attention. There is a new Homebrew module which makes print outs that you can paste to…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
The plate looks great on the base of any sundial, but looks most impressive on this design: Solar Motion, Position & Time Measurement Instrument - Northern Hemisphere by 3DMason | Download STL model | Printables.com Here is a partial…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
It might be a great inspiration for someone to change to their needs and other cable types. Remixes appreciated. The white PETG-Version can easily be marked on with a permanent marker.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Služi ako nastenny držiak dialkoveho ovladača
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
____________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Summary The episode in [ENGLISH] : http://www.mojoptix.com/?p=108 L'épisode en [FRANCAIS] : http://www.mojoptix.com/?p=75 Note: To see more inventions and contraptions, suscribe to Mojoptix on Youtube ! [ ENGLISH ] Tadam ! A Sundial…
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
This is a 3D printed 5015 type blower/fan that is suitable for Prusa i3 or any other type of printer. I used a spare fan ( Multicomp MC36257 with sleeve as bearing) that I had laying aroung and modified it to use it with these 3D printed…
Summary The Heliochronometer is just what its name implies—a solar chronometer. It is not a toy or ordinary garden ornament, but an astronomical instrument for precision timekeeping as well as education. Main Features Accurate to within 5…
General The radial engine is a reciprocating type internal combustion engine configuration in which the cylinders "radiate" outward from a central crankcase like the spokes of a wheel. It resembles a stylized star when viewed from the…
In early spring of 2023, I built a small Indy / Jock Lindsey's Hangar Bar themed bar in our basement storage area /unfinished game room. As of mid-April 2023 I started to ask around on the internet looking for a Dial of Destiny /…
The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…
Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…
Accurate measuring tools are essential for successful 3D printing of anything that mates with anything else. While these calipers aren't as accurate as the real McCoy, they are handy when your Mitutoyo's are hiding elsewhere. They have…
HEPA/Carbon filter box for the Bambu Lab X1C 3D Printer. Kudos to the previous designers, for the great idea to have a modular filter box. The original used 40x10mm axial fans and exhausted at the top. The version I worked off of was a…
===============Update 30Aug=============== a lot of people don't know where to view the bed mesh, you just need to go to your browser. Go to http://192.168.50.229/#/home change the ip to your machine ip, enter the page, then change the…
For Ender S1 Pro easier bed leveling by using dial indicator digital is better ------- Added V1.1 (untested)
NOTE: This kit card was prototyped and designed for Bambu Lab printers using Bambu Studio. As such, I don't know how it'll print with other printers. My .3mfs can also be opened by OrcaSlicer and you'll find size variations in there.…
Umpire's 4-dial and 3-dial Indicators These indicators have the dials in the traditional order of strikes, balls, outs, inning. If you prefer a “count order” you can find them here. There are two options of indicator: a four dial…
Updated version (crankshaft doesn't block the exhaust anymore) can be found on the MakerWorld: https://makerworld.com/models/1801690-balloon-powered-radial-engine Run by just blowing air into it. Demonstration:…
Next Update: There will be another version for the southern hemisphere. Update: US/UK version available as well the cover and storage for the pointer. Important: only the old cover fits the old model! For DIY in european and US/UK time.…
This is a small, functional radial turbine which uses a 1408 brushless motor. The 3 piece assembly is really easy, just make sure you print case with support. The .3mf file includes already the right settings and paint on supports. Make…
Model of a 5 cylinder radial engine with a frontal cutout to see all the cool moving parts. The tolerances between the piston and the cylinder wall are very tight, be sure to have some WD40 or other lubrication at hand. Also included is a…
This Mandala Sundial is made in two parts - a base with a custom layered mandala and the dial. To assemble this project, align the tabs at the bottom of the dial with the voids on the base and carefully push the two pieces together. STL…
This horizontal sundial works best at 45° latitude north, that is halfway between the North Pole and the Equator, where many cities are located. You can check what countries the 45° parallel crosses here . In order to make the sundial…
3 Part Celestial Dial Pendant from Bloodborne. Modelled at 10cm diameter. Probably will turn out better with a resin printer but I printed this with ULTRADETAIL setting in prusaslicer and it turned out nice.
Based on the image I've made simple model for my needs - but I'm pretty sure it's handy for everyone who experiment with mounts and cooling. Outer diamete of the fan is probably not exact as on the image, but from my experience it's…
My CR-touch may be working, but for whatever reason, my prints are not using the stored bed mesh. (Yes I added M420 S1 blah blah blah) Creality support is dismal and I needed to get back to printing! I designed this indicator mount to be…
A futuristic ball holder inspired by wormhole geometry and radial symmetry. This sculptural stand grips sports balls (basketball, soccer, baseball, golf, volleyball) with elegance and stability, making it ideal for display or storage. The…
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
A radial engine is an internal combustion engine configuration in which the cylinders radiate outward from a central housing like the spokes of a wheel. It resembles a stylized star when viewed from the front, and is called a "star…
Large, garden variety sundial. To use, align it towards true north and hope for clear skies (for instructions on finding true north, see: http://www.princeton.edu/~oa/manual/mapcompass2.shtml ). Inspired by/remixed from this great…
This will give an indication of whether the tension on both belts are equal
This adapter allows to attach a indicator dial to the print head of Bambu Lab Printers (P1P, P1S, X1, X1C) to measure bed flatness. I am using a STEINLE 3105 (EAN 4251285620469) to do the actual measurements. If the adapter does not fit…
Print in .2 layer height dont enable support
Hey, This is a fan shroud for Nvidia Tesla cards which are structurally identical to the P40. After a failed attempt using a normal Noctua (damn I sank money into it...) fan I realized that air pressure is the key to cooling the P40. Due…
I needed a dial gauge mount so that I could perform the ‘ XYZ steps Calibration ’ within the written guide ‘ Teaching Tech 3D Printer Calibration ’. After reading the calibration guide I strived to create mounts that I could accurately…
7 Cyl Dummy Radial Engine This design is not based on any particular real world engine but to look something like that is relatively easy to print. This is 138mm in diameter but can easily be scaled up or down in your slicer software.…
Hello, Fan duct for flsun super racer no supports!,
This is my Print in place - Compliant mechanism using Dial indicator! No supports, no assembly, just print and use! See how it works, and how it was designed!: https://youtu.be/RFkn6gMkz78 All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most…
The “universal” mount will work with most dial indicators and fit's into most tool holders. The all-in-one model fits an AXA quick change tool post and replaces the back of your dial indicator. That way you're not tying up an expensive…
How to Use the Sundial First, set up the sundial so that the tip of the gnomon points true north in the northern hemisphere and true south in the southern hemisphere. Next, adjust the angle of the gnomon to match the latitude of your…
I made this dial indicator bracket that utilizes the LIDAR bracket for mounting to the print head. It uses (1) M4x15 socket cap screw w/ nut, & (2) 3mm heat-set inserts and the factory screws that hold the LIDAR on. Note that the LIDAR…
There are a lot of dial indicator mounts out there, but I wanted to make one that would be able to be mounted to a 2020 extrusion, as opposed to your hot end, as there are so many different types out there. I am no longer using the stock…
The inch version of these calipers has a direct-read scale with 0.1" markings and a secondary micrometer-style scale that reads down to 0.001"! (Yeah, right...) Realistically, it's maybe accurate to +/-0.010". The metric version has a…
I got tired of using dice for wounds and such when playing Warhammer 40K and other table top war games. I didn't really want to spend $5+ per dial from various websites and I didn't love most of the designs on the inter-webs so I got…
Public domain Wright R-2600 radial engine model by mark06gt . Originally uploaded to Blend Swap .
Status Dial for One Piece Card Game This file was designed to be print in place, right side up. There is a single empty layer between the top and bottom parts when printing at .2mm layer height. Fusing may occur. After printing, you may…
A simple bracket to be able to easily read height to bed from a Sprite Extruder on an Ender 3 S1 Pro or Plus. Stop using the "paper trick!" With an Allen wrench, this allows simple removal, installation, and some height adjustment for the…
Files updated . Now thicker base sround the Dial stem, And can secure Dialindicator with a 3mm wood/self tapping screw. Update: Uploaded one model with M3 threads. Clips on over heatblock fan cover, should be removed after use as it…
This heliochronometer was constructed out of ABS plastic filament. To find out how to align & use your sundial check out: Heliochronometer - World's Most Accurate Sundial by yba2cuo3 | Download free STL model | Printables.com Change…
Summary This design was inspired by the Aten Heliochronometer Sundial, model B4003, designed and built in the 1990’s by the craftsman J.D. Gard of Tucson, Arizona. It’s a beautiful instrument made out of brass and aluminum, and it claimed…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
I present a model of a foldable sundial, for learning at school and outdoor use. The model halves must be printed separately. Then we gently connect the parts on the hinge (I was inspired by the hinge model:…
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
This is a container for 150mm/6in dial calipers that gets them as low as possible without laying them on their side and taking up extra horizontal space. I had to leave out one of the magnet holes to make room, but the other 23 should…
Ender 3 S1/Pro/Plus Sprite Fan Duct A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers . This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the…
This is a USB HID device that is set up to play media and adjust the volume of your speakers. Underneath the knob is a NeoPixel strip that changes color whenever it’s turned up or down. You can single-click to play and pause media,…
NOTE: YOU NEED TO MIRROR THIS FOR THE 2nd SIDE. A simple holder, you can use a ¼" or 6mm steel rod or upside down end mill to hold it in your spindle and then clamp the dovetail of your test indicator to it as well. Best to position the…
Umpire's 4-dial and 3-dial Indicators These are “Count Order” indicators. The order of the dials is balls, strikes, outs, inning -- the same order as you would announce the count. If you prefer a traditional order you can find them here.…
NOTE: New as of September 7, 2024 - I added a remix of this case that supports Bart Dring's FluidDial Starter Kit. Buy Bart's FluidDial Starter Kit: https://www.tindie.com/products/33366583/fluiddial-connection-starter-kit/ Access the new…
A replacement back for a dial indicator that lets you mount it to the X axis rail of a Kobra 3. It is designed for an inexpensive WEN model , but based on some other models I tested, should work for the popular Clockwise digital model or…
Messuhrhalter zum einstellen des Zündzeitpunktes bei Motoren mit M14x1,25 Gewinde. Ich habe den Halter mit PLA gedruckt, aber man sollte vielleicht eher zu PETG oder ABS greifen. So oder so gilt, einschrauben NUR per Hand. Schichtdicke =…
A dial Indicator is a great way to fine tune your printers bed. This mount is a quick and convenient solution to quickly secure your dial indicator to the extruder for bed leveling. All that is needed are two 3mm x 10mm screws to secure…
Initially designed for counting number of cups of water consumed, it can be adapted to count various things for games or in general. It features 11 positions which 'click' in place with a simple compliance mechanism. This is a two body…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
History The radial engine is a reciprocating type internal combustion engine configuration in which the cylinders "radiate" outward from a central crankcase like the spokes of a wheel. It resembles a stylized star when viewed from the…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
print whit 2 color change and enable iron on the topmost surpace only pla/petg
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Are the tiny little shafts on your potentiometers not fun to twist? Throw a custom cap on it! 6mm internal hole, fits my 1/4" potentiometers snuggly. A recessed hole exists in the bottom of each cap to accommodate a few millimeters of…
Tray fits with a flat indicator back (no lug). Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
A mount for a dial gauge for the ender 3 v2 neo, just snap in the head shroud and can show you how flat is your bed.
Remix from wind-up Bathtub Boat V5 https://www.printables.com/de/model/631-wind-up-bathtub-boat-v5-with-benchmark-test-badewa/comments/846735. I added an alternative torodial-propeller. Print the torodial-propeller with layer-heigt 0.05…
![[finecoar] Grind Setting Dial V2.1 for Eureka Mignon](https://media.printables.com/media/prints/777304/images/6039888_4ce2cf05-2e19-4e57-b1fe-74c1b6c4f185_63bb1ffc-94d1-4e5a-895f-4ec86adb5f53/right_round.jpg)
![Ender 3 V2/S1 - Dial Gauge Mount [X;Y;Z Axis]](https://media.printables.com/media/prints/271954/images/2419999_3d264d23-8e9f-4cc7-852f-57010e1ab95e/use.jpg)
