97 models
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Print the test Piece → Measure it with your callipers → Input the measured results in the Google Sheet Calculator → Get the results from the sheet with calculated Shrinkage → Input in your slicer → Voilá, perfectly calibrated print's…
What this does Helps you correct XY print scaling issues methodically and repeatably instead of guessing or coarse whole-object scaling. Works for Z too (though this tends to be less of a problem with FDM printers). Gives you an easy way…
See image for dimensions. With your measured dimension and the given distance you can calibrate you're esteps. You can also use de holes to calibrate your hole offset.
I whipped this small test design up to check the dimensional accuracy of my printer. This will print circles and squares of various sizes as holes and towers that can be measured to verify accuracy and determine any dimensional…
Introduction : This is a print in place object aimed at tackling the XYZ dimensional accuracy calibration. That's a mouthful! Basically… if you want to print functional objects like collector card holders, boxes, hinges, doors, gears……
Prints in 2 pieces. The shell and the bullet. The bullet is hollow, allowing for small object to be stored inside.
dimensional test cube, it can calibrate printer and profile for optimal dimensions
Spacial spiral earrings, ready to print / Prostorové nášunice, čtvercová spirála. Připravné k tisku
Background Belt tension must be set correctly on any core XY printer to ensure dimensional accuracy in the X and Y plane. Increasing the tension on the belts (slightly!) stretches them, causing a given rotation of your stepper motor to…
Print this out, measure with calipers after it has cooled down to room temp, adjust esteps based on that. X and Y corners are rounded so if you don't have pressure advance on, it won't mess up your measurements
Solid model of a .50 Caliber. Prints in 1 piece. No Supports.
Please refer to AP.Engineering page Shrinkage Calculator for how to use it and the very important spreadsheet. The reason for the re-mix is for some minor issues I had with setting up an imperfect CoreXY (Voron2.4r2) that left behind an…
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
This is my attempt at a dimensionally accurate model of the S21. I used it as a tool to make a case. I have included the .stp in "case" you would like to do the same. The .stp and .stl files should be pretty freaking close to the actual…
Printed parts list (113) 1 x 1_Stand.stl: Layer:0.15mm Raft:no Support:yes Infill:30% 1 x 1_Stand_Bottom.stl: Layer:0.15mm Raft:no Support:no Infill:30% 1 x 1_Stand_Arm_1.stl: Layer :0.15mm Raft:no Support:no Infill:15% 1 x…
A quick model of the AYN Thor I made to try out different colour combos. I have uploaded a STEP file which you can use in Fusion360 to assign different materials. DISCLAIMER: This model is not dimensionally accurate, it should only be…
3D printers always have some error, usually creating larger parts & smaller holes due to the width of the extrusion. On the other hand, all plastics shrink when cooled. Especially ABS. How can we get both of these conflicting parameters?…
I experienced frustration when trying to accurately redimension a model to take shrinkage/expansion into account, the regular XYZ test model dimensional error did not match the error seen on the real (non-test) model, so I had to do it…
This test allows you to understand if your printer is set well in the slicer from the dimensional point of view of the holes, as well as checking the real measurements of x, y.
Designed in OpenSCAD to test printing parameters The test piece is 30x30x110, with rounded corners Print instructions Unassociated tags: dimension test, dimensional test, monoprice mini delta, tower test Category: Robotics
Set of 5 cubes and one 12mm diameter peg to test the tolerance of your 3D printer ( and settings). Measurements are in millimeters (mm) . Downloaded tests did not work for my printer so I created my own, and it worked-out great! Be…
Stratocaster electric guitar with humbucker pickups and accurate dimensions.
This labyrinth is designed with a 3D wrap-around design. Additionally, there are tunnels leading to other sides of the labyrinth adding another dimension of challenge to your maze-solving abilities. Two of these go straight though, and…
This isn't just another calibration print. The CN3D Skew, Squareness & Dimensional Accuracy Test was specifically designed to work together with the free CN3D online calibration calculator. Print the model, take your measurements, then…
This is the file I used to print and test my robot is 75mm square, 1.6mm walls, with an X and a Y extending from the sides. I've uploaded a few additional versions. There's another version that's a 50mm square. Then, I've uploaded a 75mm…
A simple but highly accurate rasperry Pi 3B and V2 camera models for use to model around or to use with large assemblies. These models were created using the offical rasiperry Pi drawings (attached as downloads)
Resizable in slicer! Can be resized in slicer as big as you want! Default length is set to Exactly 6" to make it printable on most 3d printers(152.4mm) Other Framing Available: T-Slot(for Framing): 2020 2040 3030 3060 V-Slot(for Framing…
This is a 100mm x 100mm L shape that's meant to check your X/Y/Z axis are square. Also works as a dimensional test, 100mm will give you a better idea than a 25mm cube. And you may print it faster. If you don't need to check the Z axis you…
This test was designed to address some issues i have found with other tests i have seen. Many of which are to large (take to long to print), to general (test to many things at the same time), or to vague (do not properly reference all the…
instructions for Marlin Firmware this model has better repeatability that one in the guide. Print seams on corner and external perimeter first.
I am sure you have a variety of Nintendo Switch cartridges—some with the original cases, others without them. It makes sense, then, to store everything uniformly. If only someone could replicate the original shell and pack it full of…
Just as the name says. Made with openscad.
Teensyduino 4.0 Dimensionally Accurate with Largest Components. I tweaked an existing model that was not available in STL format. The PCB and components are dimensionally accurate and placed within .25 mm.
A quick little object I made in Prusa Slicer 2.6.1 to check the dimensional accuracy of my newly assembled mk4. I chose to use dual units to see how close to true dimensions it would come out when measured with both the metric and…
I wasn't finding a calibration print that I liked for tuning my 'Horizontal Expansion" and “Hole Horizontal Expansion” settings in Cura, so I made one. And now, for the low low price of your own time and filament, it can also be yours!…
just buy gliiter and a bottle link.…
This is a companion for the dimensional calibration tool by LuckyPants . It allows you to place up to 4 of those tools at a 45 degree angle in an oven (or other thermal test environment). I used to for testing how annealing my PLA based…
file is about just bigger than 1' x 1' so rescaling may be necessary
Just the shape, no labels or branding.
A Dimensional Shambler. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
Flek zapatone - Interdimensional Signal Receiver (Unverified)
After needing and not being able to find a model file of a pi3 b+ I made my own. There were a few out there, but things like the holes and ports were not accurate in their positions. This one should be correct for designing things like…
He realizado este modelo en tres niveles, en cada nivel he aplicado una geometría distinta. Como peculiaridad los tres vértices de cada estrella más cercanos al centro del modelo forman pequeños hexágonos.
Remix of Lego Dimensions Display Hexagons, for my sons Mini Resin Prints
I went to the star trek tos set museum in ticonderoga NY and tried to scan the chess board. The scanner didnt work so well with the chrome finish of the base, but between reference pictures from the show and dimensional information from…
Descubre este innovador Tangram, un clásico rompecabezas chino reinterpretado en 3D. Las piezas han sido diseñadas con una altura diferente, añadiendo una nueva dimensión a la tradicional experiencia del Tangram. Perfecto para imprimir y…
Immerse yourself in the winter charm with my three-dimensional snowflake design. Every detail is meticulously divided for perfect 3D printing. The three-dimensional structure adds an extra dimension of beauty to this classic symbol of the…
This is a small part to measure dimensional changes (shrink) in each axis after printing. It is designed for use with Filament (sinterable high-metal content filament) and other materials that will go through a post-printing process that…
Four 100mm diameter hoops in the XY, YZ, XZ and XYZ planes. The XYZ hoop is at 45°. Hoops are 10mm thick. Each hoop has 7 holes ranging from 7mm to 1mm in diameter. There are also square cutouts at each quarter that are 6mm diagonal…
Description A parametric, two-dimensional cable organizer. Stick to your wall or under your desk with double-sided tape. Print settings TPU, 95A 2 mm layer height 3 perimeters
This is a fun little game that expands the original tic-tac-toe for when it gets too basic. The columns and the base I have as separate files to make it more sturdy and more portable. Just insert the columns into the slots. They should be…
I use this to add padding to the arms of a surfboard rack. The rack is made out of US dimensional lumber 2x2's. They fit snuggly enough not to pop off when you grab your boards, but are pretty easy to get on. Printed With: TPU .28 layer…
When the use case of a model means that dimensional accuracy is important, you need to know what error is introduced by your slicer and printer, and learn how to calibrate the model and printer to compensate. You also need to understand…
Just a Simple Dimensional Accuracy Test
These attach to the top of a standard 2x8 or 2x10 shelf with a single screw. The bottom hole is sized for a snug fit 4mm OD PTFE tube . Use a counter sink bit to chamfer the PTFE to make it easier to insert the filament. There are 9 files…
Print with whatever standard settings you use on your printer. Then check the X, Y, and Z dimensions for dimensional accuracy. Use the 10mm width of the section to verify your extrusion before adjusting the XY steps. Don't forget to check…
Definitely NOT a king size Hershey's bar.
This simple calibration cylinder is great for verifying: Dimensional accuracy in X/Y and Z Roundness and circular symmetry Vertical resolution and Z-step smoothness Use digital calipers after printing to check how well your printer…
if you don't have a metric pair of calipers this cub should measure out to 1" all a round
When designing things to be manufactured, tolerances (how much the real part can deviate from the drawing) are important to ensure everything works and everyone who tried making mechanical systems with 3d printer probably already knows…
This 3 mm thick ornament was designed with 0.175 clearance on each side of the slots so it stays together with a moderate press fit, and stays together when hung on the Christmas tree. Makes a nice token gift that can be easily mailed. To…
This was originally designed for me to accurately adjust my tolerances on my custom PC Case design when sharing with friends based on their printer configurations and how precisely they can print holes. The top holes are designed to be…
A series of prints used to determine the dimensional error of your parts as a function of length. Each part has an inside and outside point to measure from with vernier calipers, which may reveal other issues with printing. These can be…
instructions as shown in the photos
OrcaSlicer Dimensional Calibration Test A simple calibration model designed to help OrcaSlicer users quickly check dimensional accuracy and general print consistency. The model includes: • 40 × 40 × 2 mm base • Four 8 × 8 × 10 mm corner…
The average FDM 3D printer has a tolerance of ±0.5% (± 0.5 mm) is yours more accurate? print and mesure this test to find out! Use a caliber (and micrometer (if you have one)) to determine the measurements! (all dimensions on 3D model are…
These were some basic models that I designed to help connect 2x2 furring strips for the enclourse around my MPCNC (V1 Engineering). One model will serve can be screwed down onto a base and the other will serve as a connection piece. Both…
Just a can you might find in your kitchen. Add your own label.
Spools of 3dimensional and Prusa seems to be identical. I have upcycled a 3dimensional spool (⌀200x76). Cut the spool in the middle. To get a constant thickness of the spool, I recommend to use a piece of wood which fits to the inner of…
It makes a nice pattern on 4" dimensional lumber.
This is my first model i am posting publicly The model is a (hopefully) dimensionally acurate recreation of a realme wall charging brick (plug) so if you ever need it for something here it is
Print Settings (Prusa MK4S): Nozzle: 0.4 mm High Flow (HF), with variable layer height Supports: None required Infill: 15% Materials Used: Inner Corpus & Lid: PolyTerra PLA – Charcoal Black Outer Hull: Bambu Lab PLA – Translucent Blue…
100x160mm sign, with art of mice, reading "Hyper intelligent Pan dimensional Beings" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all…
If you want your numbers to be smooth and beautiful from all sides, you should print them standing up. Height up to 92 mm, thickness 33 mm When printing, I used the following parameters: PLA Nozzle - 0.4 Filling - 20% Supports are needed…
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Here is a fun 4x4x4 tic tac toe game, but it incorporates the game on new levels. Items to print (1) base for playing piece storage (1) base cover for playing piece storage (4) tic tac toe levels (16) layer connecting rods (32) playing…
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Version française plus bas The FDM Z-Dimensional Test is a preliminary tool designed to measure dimensional variation along the Z axis of FDM/FFF printed parts. The model provides four reference depths: 40, 60, 80 and 100 mm . Using depth…
Sophie Cunningham #8 Indiana Fever dimensional jersey display, navy blue with the Fever logo above the number. Designed and printed by Three-D Craftsmen. Multicolor print profile for Bambu Lab printers with an AMS, sliced in Bambu Studio.…
Larry Bird #33 Boston Celtics dimensional jersey display, with the Celtics logo under the numbers. Designed and printed by Three-D Craftsmen. Multicolor print profile for Bambu Lab printers with an AMS, sliced in Bambu Studio. The 3MF…
Kelsey Mitchell #0 Indiana Fever dimensional jersey display, red with the Indy logo below the name. Designed and printed by Three-D Craftsmen. Multicolor print profile for Bambu Lab printers with an AMS, sliced in Bambu Studio. The 3MF…
Show off some Hawkeye pride with this dimensional Iowa-inspired 3D art piece! This design combines raised elements with textured details to create depth rather than a traditional flat sign. It makes a great display piece for a desk,…
Show your Fighting Illini spirit with this dimensional 3D printed art piece! The design features a layered Fighing Illini motif with raised lettering, a dimensional center emblem, contrasting boarder, and exposed infill that gives the…
I created a quick dimensional hype chain for the Huskers in honor of the amazing basketball season they have going right now. I used a carabiner to connect it to mini hyoe chain links! hope you enjoy and GO BIG RED!!!
I was drawn to the Dimensional Mosaics I have seen so many talented creators post here on Maker World and wanted to try my hand. This is my first go at it and my first original creation in the 3d print world. I hope someone out there…
Print with whatever standard settings you use on your printer. Then check the X, Y, and Z dimensions for dimensional accuracy. Use the 10mm width of the section to verify your extrusion before adjusting the XY steps. Don't forget to check…
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Here is a fun 4x4x4 tic tac toe game, but it incorporates the game on new levels. Items to print (1) base for playing piece storage (1) base cover for playing piece storage (4) tic tac toe levels (16) layer connecting rods (32) playing…
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
