Search results: disconnect

Sort order

196 models

P
PrintablesOkojo

Keychain Buckle / Quick Disconnect

I hate any bulk to my keys. So, I only carry around the keys that I need. This buckle acts as a quick disconnect for some of your keys. Maybe for 1 key or for a whole set. Colour code them even! These are both smaller and lighter than the…

Downloads
307
Likes
78
Rating
3.67
P
PrintablesJib

Quick Disconnect - Flanged - Duct Adapter for Ventilation

Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA

Downloads
131
Likes
32
Rating
0
P
PrintablesWillie Designs

Knob, Valve, Hose Quick Disconnect

Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…

Downloads
18
Likes
2
Rating
0
P
PrintablesScottyPrints

Boat Leak Quick-Disconnect Hose Couplings for Air

Hose Couplings for Air ¼'' male fitting threads into bottom use clay, playdough, or rubber gasket around edge contacting boat use thread tape on print between air fitting apply soapy water to boat or welds in question apply printed nozzle…

Downloads
4
Likes
1
Rating
0
P
PrintablesJody

Bambu AMS Disconnect Tool

This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…

Downloads
68,879
Likes
6,637
Rating
4.96

Bambu Lab AMS Disconnect Tools

Due to the way the Bambu Lab AMS Buffer is designed, disconnecting the PTFE tube and the control cable can be difficult. The tube coupler's release ring is recessed inside the buffer, and the cable's release clip is between the cable and…

Downloads
10,666
Likes
1,140
Rating
4.89

Magnetic Quick-Disconnect Ventilation system for Resin 3D Printers V1

UPDATE: There is now an even BETTER version that uses a twist-lock mechanism so you don't have to bother with the magnets: https://makerworld.com/en/models/487870 UPDATE: These files have been superseded by V2!! See update notes below.…

Downloads
3,409
Likes
585
Rating
5
P
PrintablesHarald Geisler

Remix: Bambu AMS Disconnect Tool

Ein sehr nützliches Tool und mein Dank dafür geht an Jody. Ich habe es etwas angepasst, indem ich einen 5 x 3 mm Magneten eingelassen habe. Die Öse habe ich anders platziert und die Schräge für den Stecker abgeändert, da sich mein Stecker…

Downloads
1,203
Likes
148
Rating
4.91
P
PrintablesMAKERTEAM®

Bambu A1 AMS Disconnect Tool for PTFE-Tubes

This little tool is a great help if you need to diconnect the PTFE tubes of your A1 (mini) AMS. Just put it around a tube, press it down and pull the tube out of the printers hose bracket as shown on the pics. Material: PLA/PETG…

Downloads
1,135
Likes
110
Rating
4.89
P
PrintablesWhiteDragonD

Sharkbite fitting disconnect tool

Added a hole to hang it from a pegboard and negative text for identification.

Downloads
1,118
Likes
48
Rating
5
P
PrintablesMarekZeman91

Bambu AMS Disconnect Tool (remix: no text, no holes)

Bambu AMS Disconnect Tool remix without text and holes

Downloads
1,019
Likes
57
Rating
4.95
P
Printablesiamjcole

5/16in "GM-Style" Fuel/AC Line Quick Disconnect Tool

I didn't want to spend 12 dollars and wait for shipping, so I whipped this up based on my fuel lines and images online. It took a few tries to get the width of the central ‘sleeve’ the in the sweet spot. Thin enough to fit, but thick…

Downloads
921
Likes
36
Rating
4.8
P
PrintablesMacian

Fuel Line Quick Connect Disconnect Tool for GM Fuel lines

I needed a tool to disconnect the fuel line quick connect fittings on my Trailblazer. This one worked great and should work for any GM or other vehicle fuel lines. Designed for 5/16 (8mm) but worked on both size lines in my 2004…

Downloads
904
Likes
49
Rating
5
P
PrintablesMarekZeman91

Bambu AMS Disconnect Tool (remix: mini)

This is a remix of my remix. My original remix removes the text and the holes as I didn't need them. This remix makes the model even smaller.

Downloads
750
Likes
25
Rating
5
P
PrintablesAXUL

Enclosure for XH-M609 Low Voltage Disconnect 12V 24V 36V Over-Discharge Protect For 12-36V Lithium Battery

The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…

Downloads
715
Likes
52
Rating
5
P
PrintablesDennis

Fuel Line Quick Disconnect Tool

Remixed so its a bit taller. 3mm to be precise. Works great on my 2001 mazda miata/mx5

Downloads
584
Likes
58
Rating
5
P
Printablesosirisad

Ford 2.0L Heater Hose Disconnect Tool

You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…

Downloads
579
Likes
24
Rating
5
P
PrintablescHaOt166

Bambu AMS Disconnect Tool - 5x3mm Magnet - Dual Color

Bambu AMS Disconnect Tool with 5x3mm magnet for dual color print Remix of both versions (body from remix, letters from original) for dual color print and with an inset for a 5x3mm magnet. Thanks to @Jody and @HaraldGeisler for preparatory…

Downloads
535
Likes
74
Rating
5
P
PrintablesGonzoStrange

FN P90 & FS2000 Selector, Sear, Disconnect Extender, Ejection Switch

P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…

Downloads
484
Likes
19
Rating
0
P
PrintablesArek

Bambu AMS Disconnect tool for 4 port HUB and 1 port filament buffer

See “ Differences of the remix compared to the original” section for changes description.

Downloads
468
Likes
54
Rating
5
P
PrintablesDik Harrison

4 inch flex dust collector hose quick disconnect

I needed a quick disconnect to be able to swap my dust collector from one mobile tool to another. I could not find what I needed on PrusaPrinters, but I found one on another site that unfortunately did not fit properly. I redid it to fit…

Downloads
462
Likes
73
Rating
5
P
PrintablesBen

5/16, 3/8 and 1/2 inch Fuel Line Disconnect Tools

I needed a 5/16 fuel line quick disconnect tool and tried to print a couple that other people designed. None of them worked so I made my own. Not fancy but they do work.

Downloads
460
Likes
36
Rating
5
P
PrintablesTreesmacker

Bambu AMS Disconnect Tool Remix with Radius

I added a radius to the PTFE release end of this tool in hopes of making it stronger. Background: The Bambu AMS Disconnect Tool designed by Jody is fantastic and I've been using it regularly for releasing the PTFE tube on by troublesome…

Downloads
430
Likes
23
Rating
5
P
PrintablesPeter T

MC4 Disconnect Rings

This is one of the first models I made for 3-D printing. These tools are used to break MC4 connections by simultaneously pressing two tabs that hold the connection together. Print with the ring flat on the print bed, and cut off the…

Downloads
418
Likes
13
Rating
4.33
P
PrintablesMistertech

Quick Disconnect Keychain / other uses

I designed this as a keychain but you could scale it up for use as a quick disconnect for many purposes. The release button is flush with the body so it will not disconnect accidentally. The engagement between the parts should be pretty…

Downloads
392
Likes
93
Rating
5
P
Printablesfiretech

Magnetic Quick Disconnect for MMU PTFE Tubes

I want to be able to easily remove my printer from my enclosure for maintenance. While the collets on the MMU3 make it quite easy to remove the PTFE tubes, I worry that it wears on the tubes and/or collets on every removal and insertion.…

Downloads
345
Likes
147
Rating
4.93
P
PrintablesPugnation

Remix Bambu AMS Disconnect Tool with Magnet cutout

This is a remix of the original Bambu AMS Disconnect Tool by Jody. I have only made a slight change for this remix to add a cutout for a 6x3mm magnet to all the tool to be stored directly on the back panel of the X1. The magnet is a press…

Downloads
316
Likes
38
Rating
5
P
PrintablesRadTechDad

AMS Disconnect Tool - Flush Letters

This is the same tool, but with the letters flush with the rest of the tool.

Downloads
311
Likes
24
Rating
5

MC4EX Disconnect Tool

Remixed to fit MC4EX connector, which is slightly smaller than a regular MC4. Take a look at the pics to see an example. I recommend printing in Nylon or PETG. I also added a hole so you can put a key ring on it, and clip to a carabiner…

Downloads
298
Likes
10
Rating
4.6
P
Printables3D Print Fun

AMS Multitool - 3 in 1 Scraper, AMS Disconnector

I forgot where I got the files, so I can not link the original, if you know, please send me a link, and I will update the description. I am not trying to take credit for something I did not make myself from scratch. Edit: Bryan reach out…

Downloads
294
Likes
64
Rating
0
P
PrintablesGdschaf

AMS Disconnect Tool Gridfinity Holder (Bambu Lab)

I had a place for all my other tools but my AMS disconnect tool was just floating around. It almost fit in the glue stick holder so I just squared it off in Fusion 360 to better hold the AMS disconnect tool and printed it off. Now it has…

Downloads
287
Likes
43
Rating
5
P
PrintablesHerrRiebmann

Battery disconnect switch key (Mover)

I was annoyed by the huge key, which prevent the cover from closing. With this smaller key, the cover still doesn´t close completely. But for me that´s enough to easily load my motorcycle to my Knaus Sport & Fun caravan. Print Settings…

Downloads
278
Likes
25
Rating
0
P
PrintablesWildBill

Gardena Male Quick Disconnect Plug (that works)

Update - I added .030" to the o-ring groove diameter so it works better with a -111 o-ring. This will no longer work with Gardena's apparently proprietary o-ring. This is a precisely copied male plug for Gardena's quick disconnect system.…

Downloads
269
Likes
40
Rating
0
P
PrintablesRobertCowanDIY

xTool P2 Exhaust Duct (right angle with quick-disconnect)

This exhaust duct attaches directly to the back of an xTool P2, replacing the existing duct. It lets you fit the whole machine closer to a wall and vent the exhaust left or right. There is a feature for adding a zip-tie to secure to the…

Downloads
261
Likes
50
Rating
0
P
PrintablesZach

BMW Quick Disconnect Tool

This tool is for power steering & transmission lines on 1999 through 2006 BMW 3 series and X5 (E46). Compare it to CTA tools 3466. It works by compressing the quick release ring, allowing you to disconnect the hoses easily. I added a 13…

Downloads
257
Likes
39
Rating
5
P
PrintablesREMLURELMI

Automotive Quick Disconnect Tools - Fuel Line & HVAC - Six Sizes

These parts are similar to Lisle 37000 or Harbor Freight 63959 . Why buy a set when you can print the one you need? Fitting size is marked on the part. Some complaints about the HF version is that the opening is too narrow, so these parts…

Downloads
247
Likes
25
Rating
5
P
PrintablesDik Harrison

Dust collector port for my 4-inch flex dust collector hose quick disconnect

When I designed my 4-inch flex dust collector hose quick disconnect, I also designed a port for a tool that did not have one. I have included a SketchUp (SKP) file if you want to modify it.

Downloads
222
Likes
29
Rating
4.5
P
Printablesandy

MC4/QC4 Disconnect Tool for Confined Spaces

This tool is used to disconnect QC4 connectors that are compatible with MC4 but have a shroud around the barbs holding the connector in place. Disconnect tools like the one delivered with the Marstek Jupiter C+ may not work with QC4.…

Downloads
214
Likes
18
Rating
5
P
PrintablesMarco64

Snapmaker U1 Top cover IKEA SAMLA - alternative fully closed rear-parts - no disconnection required

The problem with the original model is that there are openings on the back that allowed airflow and hence less heat could be retained in the enclosure.

Downloads
195
Likes
23
Rating
5
P
PrintablesDean_Machine

5.9" Portable AC Duct Quick Disconnect

Shoutout to Max for the great model. I recreated the hose coupler and added threads as I could not get the original to work for my needs. Please see the original design for the design details. Summer months in the PNW drive the need for…

Downloads
192
Likes
30
Rating
5

Poop Box for Bambu Lab A1 Mini with Quick Disconnect

I was looking for a poop box for the A1 mini but couldn't find any design with magnets so I designed my own. Also, it serves as a stop (or a good reference point) if you're putting the printer against a side wall. The receiver has a…

Downloads
189
Likes
19
Rating
5
P
PrintablesCrazyCzech

Volkswagen ,Audi, VAG ... brake pedal/ booster disconnect tool

I didn't want to wait for $35 tool So I made a better one #T10006A VAG number

Downloads
187
Likes
20
Rating
0
P
Printablesjurassic73

Magnetic/Slotted PTFE Disconnect

This is a lightweight(under 15 grams) PTFE disconnect which uses (2) 6mmx3mm rare earth magnets(some measure 2.7 mm thick while others measure 3mm thick - measure your magnets - two designs are available below)and (2) PC4M10 neumatic…

Downloads
185
Likes
151
Rating
0
P
Printablesmr123bean

AC/fuel line quick disconnect tool

A tool to disconnect the AC lines on a car. I used it on the suction line of a Jeep ZJ and scaled to 80% for the discharge line.

Downloads
185
Likes
9
Rating
0
P
PrintablesFabi

Ecoflow Powerstream Disconnector

This Modell is a Copy of the original Ecoflow Disconnector Tool which is shipped with the Powerstream. I recommend printing it with the lowest Layer Heigh possible 0.1mm or lower. Mine is printed with FormFutura CarbonFil. PETG or ABS…

Downloads
171
Likes
18
Rating
0

Case For Low Voltage Disconnect Switch

This is a simple case for the " Onyehn 2pcs DC 12V-36V Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module ". Print at 0.15mm layer height and 0.35mm layer width (important for letter…

Downloads
170
Likes
18
Rating
0
P
PrintablesZCraftworks

Keg Disconnect Poppet Popper

I occasionally find myself wanting to open up the poppet valve on a disconnect -- for example, when I disconnect a keg and want to let the residual beer in the line drain out through the tap before disconnecting the line. This can be done…

Downloads
161
Likes
39
Rating
5
P
PrintablesSteve Rowe

4" Threaded Hose Connector Quick Disconnect

This dust collection connector has a male tapered fit to connect to a Woodstock International 4" thread splice fitting. Woodstock does not make the opposite side of this fitting to connect 2 hoses together to provide quick disconnect…

Downloads
149
Likes
17
Rating
5
P
PrintablesDan Cabral

MMSS - AMS Disconnect Tool Module

Multi-Modular Storage System (MMSS) 1x3 module designed to hold the popular AMS Disconnect Tool by @Jody . Module includes sufficient height clearance while storing the tool for use in any of the MMSS storage options designed by…

Downloads
145
Likes
23
Rating
0
P
PrintablesMatt

Bowden tube disconnect tool for 4mm and 6mm tubes upgrade

UPGRADE Sometimes it could be hard to grip the shaft on the disconnector. So here is one with a handle..... Ta da! also with a hole so you can hang it up and find where you left it...! some machines have a really tight pneumatic fitting…

Downloads
142
Likes
10
Rating
5
P
PrintablesBenjiman

Bambu AMS Disconnect Tool w/ embedded magnets

I really like the original model but wanted the magnets to be embedded. Pause the print before the cavities get covered and insert two 3x2 mm magnets. The fit is quite tight which also prevents the magnets from sticking to the magnetic…

Downloads
140
Likes
20
Rating
5
P
PrintablesTuraj Pilehvar

Bambu AMS Disconnect Tool with Captive Magnets

An AMS disconnect tool with internal voids for captive 5mm x 2mm magnets. The intended use is to pause the print and insert magnets right before the enclosing layer for these voids gets printed.

Downloads
137
Likes
6
Rating
5
P
PrintablesJR

100mm/4" Exhaust Port for xTool M1 Lasercutter (Quick disconnection)

I wasn't happy with the performance of the exhaust system of my xTool M1, because my whole apartment smelled like a forrest fire after cutting or engraving wood. The solution was an additional inline pipe fan but that required a 100 mm…

Downloads
133
Likes
12
Rating
0
P
PrintablesBobtheGreatII

Ghostbusters Leg Hose Quick Disconnect

This is a quick disconnect system for the GB Fans Leg Hose and Rubber Hose Connector . It consists of three parts: two hose plugs and the back plate. One hose plug is meant to be used with a split key ring for attaching to the uniform…

Downloads
127
Likes
24
Rating
0
P
Printablessuper_liminal

Kegland NukaTap Mini FC Disconnect Kit - Clip on Bending Support Brace

The kegland nukatap mini and flow control disconnect is a pretty cool little widget, but flexes way too much in stock form. This brace clips straight on and reduces almost all the flex. I also tried a top pin - had a 2mm bicycle spoke…

Downloads
123
Likes
19
Rating
0
P
PrintablesRed Haniwa

XH-M609 HCW-M635 Low voltage disconnect solid case

2025/12/07 update: I've added a case with cutout for KCD11 button to cutout input power. This was created because in cutoff state it would still be drawing some current for the internal converter, relay and display which is not optimal…

Downloads
121
Likes
9
Rating
4.5
P
PrintablesParabra

Remix - Bambu AMS Disconnect Tool

This is a remix of Jody's AMS Disconnect Tool Changes: Embeded Magnets Holes have been resized to fit 5x2mm round magnets Printed on Bambu P1P 0.40mm Nozzle 0.20mm Layer Heights 3 Walls Filaments: Inland Black PLA 1.75mm Inland White PLA…

Downloads
121
Likes
10
Rating
0
P
PrintablesJosef Selinger

Rozpojovač spřáhel Tillig / Tillig coupling disconnector / Tillig Kupplungstrenner (TT - 1:120)

Toto je ruční odpojovač pro spřáhla Tillig (TT - 1:120) This is a manual disconnector for Tillig couplers (TT - 1:120) Tillig Kupplungstrenner (TT - 1:120)

Downloads
118
Likes
11
Rating
5
P
PrintablesStarBuck

Hexagon Steel Sheet Holder with Bambu AMS Disconnect Tool

I used the setting sugested by Brad @ FTBT 3D and it come out spot on. a handy and good looking print.

Downloads
118
Likes
22
Rating
5
P
PrintablesCavin Rauch

AMS Stubby All in one Disconnect - Remix

Combined the Magnet and Hook version into one and made it smaller.

Downloads
109
Likes
10
Rating
1
P
PrintablesDiablo

Quick connect/disconnect magnetic Bowden coupler

Please consider leaving a like. or just be that guy who just takes it and slinks quietly out the side door. -------------------------------------------------------------------------------------------------------------There are connector…

Downloads
102
Likes
35
Rating
0
P
Printablesnischal

AMS disconnect tool holder for honeycomb wall

Disconnect tool: https://www.printables.com/model/382058-bambu-ams-disconnect-tool

Downloads
100
Likes
20
Rating
0
P
PrintablesDavid Williams

1/4 Drip Line Irrigation Quick Disconnects

This is a set of couplers for 1/4 drip line irrigation systems. I needed a way to get my hanging baskets disconnected from my drip lines when storms approached or to change them out without removing the lines and stakes and destroying the…

Downloads
99
Likes
22
Rating
0
P
Printableszea

Bafang eBike brake disconnect hal sensor and magnet attachment to Shimano SLX brake

This is made up of four prints. The holder of the sensor attaches to the main brake body using thin zip ties and points up towards the length of pull adjustment knob. The two parts with threads on the outside sandwich around the length of…

Downloads
99
Likes
16
Rating
0
P
PrintablesSPEKERDUDE

120mm fan to 4 inch duct quick disconnect coupler

Quick disconnect coupling for connecting a flexible 4 inch duct to a 12omm fan Category: 3D Printer Accessories

Downloads
99
Likes
22
Rating
0
P
PrintablesLandrolet

5/16" Quick Connect Fuel Line Disconnect Tool

PRINT 2 OF THEM. I was struggling to take off my fuel lines off a 94' ford f150 with the 5.0. I used the metal scissor tool and it just wasn't cutting it. I've had the rental from the tool store, but I didn't wanna go get em. I've seen…

Downloads
96
Likes
6
Rating
5
P
PrintablesLee Wilson

XTool D1 3in to 4in Magnetic Quick-Disconnect Coupler

Allows the XTool D1 enclosure vent hose to be used with the excellent Magnetic Quick-Disconnect system designed by Once in a Six Side

Downloads
96
Likes
17
Rating
0
P
PrintablesKBWOJO

AMS disconnect tool holder for honeycomb wall with lip

The original holder was good, but the tool kept sliding off the holder when I bumped it. I also had problems with the face and back insert separating. To fix my problem I added a lip to the front arm to stop the tool from sliding off. I…

Downloads
95
Likes
17
Rating
0
P
PrintablesHedzer

Nissan leaf ZE1 service disconnect plug

When you want to re-use a Nissan leaf battery for home storage, for example using the "Dala the great's software. You will find that the service disconnect is often missing. They often get trown away or sold seperately for a lot of money.…

Downloads
93
Likes
4
Rating
5
P
PrintablesJunNovaUSA

3/8 inch Fuel Disconnect Tool Ford

Needed to replace fuel filter on my Ford and did not have a disconnect tool so I made one. Easily popped the line off so it is tested. Inside diameter is 9.525mm or 3/8". Print with PETG for chemical resistance and flexibility. Category:…

Downloads
93
Likes
4
Rating
0
P
Printables3D RIO

Bambu-Tool PTFE disconnect

This is an easy to print AMS or AMS light disconnect tool for the PTFE tubes made with a minimalistic light weight style in mind. its under a gram in weight and I found a 50% infill its very strong and it doesn't snap easy to print…

Downloads
87
Likes
18
Rating
0
P
PrintablesPoussinJaune
Downloads
87
Likes
8
Rating
0
P
PrintablesJDM Designs

Cytac Holster to Serpa Quick Disconnect Kit - Adapter

Simple adapter to allow the use of Cytac Holsters to Blackhawk Serpa Quick Disconnect Kit.

Downloads
87
Likes
3
Rating
0
P
PrintablesNicos

Improved tolerances for Magnetic Quick-Disconnect

First of all, thanks @OnceinaSixSide for this amazing model I was getting holes for the magnets with 10mm x 2mm, which is great, except I still need space for glue. I remixed the original to improve tolerances for my printer I also wanted…

Downloads
85
Likes
14
Rating
0
P
Printablesmarcorei

Bambu AMS Disconnect Tool (remix) for 6x2mm magnets

See https://www.printables.com/model/382058-bambu-ams-disconnect-tool This is a combination tool to help disconnect the PTFE tube and the AMS cable. This remix has 6x2mm magnet holes instead of the original 6x3mm magnet holes and no text.

Downloads
85
Likes
10
Rating
5

Quick Disconnect Key Chain

Reccomended to print with supports. tolerances are a little tight, so will require either a good machine or a touch of hand finishing.

Downloads
80
Likes
8
Rating
5
P
PrintablesJeff Lundstrom

Mercury Outboard Motor Water Flush Adaptor for quick disconnect

Created this plug and cap for installing a quick disconnect I bought from Amazon here: https://www.amazon.com/dp/B0C5ZBZCYK?psc=1&ref=ppx_yo2ov_dt_b_product_details . to connect to my Mercury 200HP outboard motor on my boat. This comes…

Downloads
79
Likes
10
Rating
0
P
PrintablesOdellCreations

AC Fuel Line Quick Disconnect Tool Dodge 5/8" Universal

I made a simple one-time use, disposable, quick disconnect tool for AC line removal on a dodge truck or for other quick disconnect lines such as transmission cooler lines, and fuel lines. This is a 5/8" tool, but I made it work for ¾" as…

Downloads
75
Likes
7
Rating
0
P
PrintablesHalestorm42

Fuel filter quick disconnect tool with longer tabs

The original wasn't long enough to reach the release tabs on my 2003 Tahoe. So I lengthened the tabs in tinkercad and reprinted it. I ended up pushing them in with a narrow open ended 11 mm wrench, then once they were both seated I put a…

Downloads
73
Likes
3
Rating
5
P
Printablesdsck

Remixed Magnetic Quick Disconnect for MMU PTFE Tubes PC4-M10 version

Modified version of @firetech's Magnetic Quick Disconnect for MMU PTFE Tubes There are two parts, one for filament input and one for output to the MMU. For a smooth passage, I pulled the holes through with a 2mm drill bit

Downloads
73
Likes
15
Rating
4
P
PrintablesJason H.

Wedge Disconnect

here you go willie.. Print Settings Printer: M-150 Rafts: No Supports: No Resolution: .2 ish Infill: your liking Category: 3D Printing

Downloads
71
Likes
5
Rating
0
P
PrintablesPaddyS

Fuel Line Disconnect Tool Tray

Organizer for the Maddox Fuel and Transmission Line Disconnect Tool Set, 7-Piece from Harbor Freight.

Downloads
65
Likes
4
Rating
0
P
PrintablesMagnolia107

X3D-V3 AMS Riser AMS Disconnect Tool Holder

This holder is designed to hold the AMS Disconnect Tool and attach it to the AMS riser on the sides or the front. I printed the one shown out of eSun White PETG using generic settings on my X1C.

Downloads
65
Likes
17
Rating
5
P
Printablesmikeller

Dust Caps for Swagelok QC6 Male Quick Disconnects

Dust protection caps for the Swagelok QC6 male quick disconnect, often used as high flow gas connection on rebreathers. Print in TPU to get the flexibility required to get it on and off. Update (8 Jan 2024): Added a vented model (for…

Downloads
63
Likes
2
Rating
0
P
Printablesccl13

Gridfinity Allen Key and AMS disconnect tool holder (with hook)

The idea of this holder comes from: https://www.printables.com/model/483029-gridfinity-allen-ams-pin-bambu-lab-tools But not exactly a remix. I already have printed the “with Hook” version of the Bambu AMS Disconnect Tool:…

Downloads
62
Likes
18
Rating
4.33
P
PrintablesKO4DDG

Antenna Disconnect for a single Feedline

Antenna Disconnect for a single Feedline. petg or petg cf 25-30pct infill supports. Parts required to make this work Push on pl259 https://www.ebay.com/itm/372932230275 Bulkhead so239 https://amzn.to/4e3xkRh

Downloads
61
Likes
7
Rating
0
P
PrintablesRaptor

Gridfinity 1 square holder for AMS disconnect tools (BV3D version)

also on makerworld: https://makerworld.com/en/models/14450

Downloads
60
Likes
9
Rating
5
P
PrintablesSebomasteR

Bear Quick Disconnect PSU

Parts needed: Connector 3x M3 Nuts 3x M3 x 16 screws 1x Dupont connector with two female pins 2x XT60 connector (female part) Frame 2x M3 T-Nuts 2x XT60 connector (male part) 2x M3 x 10 screws 2x M3 washers 1x Dupont male header (dual)…

Downloads
60
Likes
22
Rating
4
P
PrintablesCerberus-3D
Downloads
60
Likes
10
Rating
0
P
Printablesmscalora

Quick Disconnect Blink Mini Camera Mount for Prusa MK3 & MK4

Mount a blink mini camera to the front of your Prusa MK3S+ and MK4 with removable section using dovetail. If the Dovetail is too tight, use a bit of sandpaper and it will free up nicely. I used PLA, any rigid material should do. I hang my…

Downloads
59
Likes
9
Rating
4
P
Printablesacmegeek

Air Line Quick Disconnect Tool (Lexus and others)

On many Lexus SUVs that have the air springs, this little tool makes it easy to quickly disconnect the air line above the air spring. I believe the Lexus air lines are 6mm or so, and this works perfect for that. You can scale up or down.…

Downloads
57
Likes
9
Rating
5
P
PrintablesHowler117

Snug Fit Cap for 1/4 Quick Disconnect Air Fitting

A coworker of mine designed this to cover the quick disconnect fittings on his air tools. He stores his air tools with the fittings up so the idea is this would cover them from all the dust he makes in the shop. I 3D printed them for him…

Downloads
57
Likes
0
Rating
0
P
Printablesfissi0n - K1TDG

MMU2/3 Multi PTFE quick disconnect

This allows quick access to the PTFE slots, and removal of the MMU or accessing a broken filament, very easily. It uses 10 collets from Amazon..: https://www.amazon.com/dp/B0CQTCR65R and four 6mm x 2mm round magnets..:…

Downloads
57
Likes
11
Rating
0
P
PrintablesMarekZeman91

Bambu AMS Disconnect Tool (remix: tiny)

This is a remix of my remix, of my remix. This remix makes it tiny!

Downloads
56
Likes
5
Rating
5
P
Printablesh

garden hose male quick disconnect plug

garden hose male quick disconnect plugs there is 2 version both are water tight

Downloads
52
Likes
6
Rating
5
P
PrintablesBecker Thorne

Magnetic Collar Quick Disconnect for Dust Collector

Magnetic Collar Quick Disconnect for Dust Collector - fits 2-1/2" hose. https://www.reddit.com/r/functionalprint/comments/f04w98/quick\_connect\_for\_my\_wood\_shops\_dust\_collection/ Saw this post on Reddit and could not find an STL for…

Downloads
51
Likes
9
Rating
0
P
Printablesuniversaljoint

MMU2 - Filament quick disconnect adapter

Update: This part gets a fair amount of attention. It does what it does not too badly. But honestly I don't use it on the MMU2 anymore because my friend vertigo235 has a much better solution than mine (uses different pneumatic fittings --…

Downloads
49
Likes
9
Rating
0
P
PrintablesLewisdan1

Hose Quick Disconnect GHT standard with grip

Hose Quick Disconnect GHT standard with grip for finger tightening. North American Standard Hose thread.

Downloads
47
Likes
6
Rating
0
P
PrintablesHubschrauber

QB-5LC Quick Disconnect Plate

Had this perfectly good $100'ish tripod sitting around collecting dust because I lost track of the QR plate. Kept thinking it would turn up, but it hasn't yet. The replacement QR plates are a bit overpriced (IMO), so I thought I'd just…

Downloads
45
Likes
1
Rating
0
P
PrintablesBeelsebob

Prusa Enclosure Mk4 power quick disconnect mount

This is a mount for a Molex Mini-Fit 8 pin connector. It fits into the space that the power quick disconnect would normally go. This provides enough pins to connect up the earth wire needed for the Mk4.

Downloads
44
Likes
11
Rating
5