116 models
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Dread Pirate Roberts rapier sword from The Princess Bride Printed in PETG and 0.2 layer height. Supports only needed for the pommel and the guard. Blade pieces are numbered in the upper side: Front[1-4] & Back[1-5]. You need 5 joints for…
"You are faced with overwhelming power. Accept your helplessness." New articulated figure from the Metroid series, this time it is the titular EMMI boss from Metroid Dread! Disclaimer: The figure you see in the photos is a larger version…
PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports
Probably the coolest power suit around, here is Samus Aran in her metroid suit. Also included is an amiibo style base, with keys for easy assembly. The Base is intended for printing on an FDM printer at .2 layer height or less for best…
The legendary Draco skin, Dread Knight Draco
Reuploaded from BigMrTong from Thinaverse, i Did not make this model, please read below for their description and support their patreon. A late night kitbash for fun. 80% of parts are just remixes, I have linked all these on the Remix…
Dread Pirate Roberts sword sheath from The Princess Bride Printed in PETG and 0.2 layer height. It is convenient to add some brim to all the pieces Supports only needed for the sheath_up. Sheath interior pieces are numbered in the upper…
Dread Pirate Roberts belt buckle and tip from The Princess Bride Belt buckle and tip. You need two copies of each and 4 joints for the buckle. I made the "leather" belt with ironed craft foam (textured with aluminum foil) and a strip of…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
The big bad of Metroid Dread, Raven Beak. Also included is an amiibo style base with keys for easy assembly. The capes are printed separately for easy painting. They slot right in under the pauldron and will require some glue to secure.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This model is compatible with the lego system.
在《黑神话：悟空》中，“恐怖之火夜叉面具”是一个具有重要背景和意义的深刻象征性物品 恶意和挑战的象征：Dreadfire Yaksha 面具可能代表游戏中的邪恶力量或挑战。夜叉在传统文化中经常被视为凶猛的恶魔或守护者，而这个面具可能象征着与这种强大力量的对抗或需要战胜。 角色和背景洞察：蒙版可能会揭示游戏中某些角色的背景或故事情节的各个方面。它可能与敌对力量或历史背景相关联，反映人物之间的冲突和关系。 文化和神话元素：…
This model is compatible with the lego system.
One part Dreadnaught If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will get free and exclusive model, Etsy shop deal and the ability to vote…
Player unit for a Dreadnaught from TI4
https://en.wikipedia.org/wiki/PlanetSide\_2 Cheers Jace
This model is compatible with the lego system.
Kraid, inspired by his appearance in Metroid Dread. Also included is an amiibo style base. The Base is intended for printing on an FDM printer at .2 layer height or less for best results. An optional color change on the last layer will…
Hey, this is a free Dreadnought Proxy. Supported files are not included.
Vhorlath Realms – Season I The Gravebound Dread Rider is an Undead dark fantasy 3D printable STL miniature depicting a fallen knight bound to eternal service beyond death. Mounted on a cursed steed and wrapped in the cold authority of the…
I finally finished making this massive thing. I don't plan on making anything remotely this complicated for a while. I printed the front half at 42% scale and it took 2 days. I used the art from B.F.M. (Big Furry Monster) to model the…
A Fan Made model of the an Asari Dreadnought from Mass Effect! This ship is compatible with the other Asari Ships but it can look pretty cool in the Eclipse livery. The ship is scaled to approximately 1:20000 with 2mm peg holes so it can…
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Dreadnaught configuration. The figure depicts the Artificer after activating the Giant Stature feature at level 9. Check…
This was modeled after game screenshots so I had to get creative for some parts, especially the plugs that are used to cover up the screw holes. Plugs are are interchangeable if you like to use just one or both variants. Print Settings…
Dreadnaught Heavy Cruiser for Star Wars Armada. Best result Ship printed at 20 microns with AA 4. Keyhole printed at 50 micron no AA. If you like my work and want to support me you can visit my Etsy shop:…
about summary. i don't know much about ship so sorry if i got any thing wrong in my summery. about printing. i wouldn't print it to small as some parts might break off, won't print or be stuck. i would print it whit very light supports as…
Corpius, inspired by his appearance in Metroid Dread. Metroid enemies are weird, but this one has a certain charm about it. Also included is an amiibo style base. There are two versions available: Corpius amiibo has some of the ribs cut…
Monster from Doom Eternal. 15 poses.
I tried to find the Original but it has been removed. It was on Tinkercad, probably why its quality was so horrible. Picture included isn't the actual model, but it's a filler until I get a actual photo,
This will print upside down on purpose! The tentacles will make it appear that The Rock has dreads! Check out version 2.0! The Rock with dreads 2.0
This is my model of the Kilimanjaro class dreadnought, modeled after the Hackett's flag ship in ME3 Because of how fragile the mass accelerators and many of the antenna on the top are, I would recommend printing this at the largest size…
Colossal Dreadmaw and Phantasmal Dreadmaw Magic the Gathering's memiest dinosaur the Colossal Dreadmaw and it's illusionary double the Phantasmal Dreadmaw I learned how to rig models so I could easily make two models that are essentially…
This is a model of a really muscular bodybuilder or powerlifter or whatever you want it to be Print Settings Rafts: Yes Supports: Yes **Resolution:** any Infill: 40-60% **Filament:** any pla/any tan/red Category: People
MZ4250 is amazing. Probably objectively the single best mini creator by volume, cost and quality of work. I'm running a Curse of Strahd campaign and in Kresk there is a little Gazebo by a magic pool so of course that Gazebo needs to be…
This model is inspired by a non player character from a private campaign. This Storm Giant is Skydread. NOTE: This model was designed for - and only test-printed on - my 4K SLA printer.
Give your favorite dummy 13 dreads! Look for more hair decorations for your dummy 13's by me! Just like the Rock with dreads , this will print upside down on purpose! This is sized to fit the original model of the dummy 13!
Insert to store the items from the Heroquest Rise of the Dread Moon expansion. Cards, dice, mission book and figures enter. The inserts are divided into 4 spaces so that they can be glued, but if you have a large format printer, I also…
Its the fearsome Dread Gazebo!!! A popular D&D joke that's been around since the 1970's, now for your printing pleasure! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free…
Background The Mandator II was an upgraded version of the Mandator I. Built by Kuat Drive Yards for the Galactic Republic after the start of the Clone Wars, it had better weapons and a faster, longer ranged Hyperdrive. How ever it was…
Lovecraftian horrors are Halloween-y so I made some of MtG's Lovecraftian Horrors the Eldrazi. Probably a bit of hubris to try and make minis for something that don't exactly follow the laws of Physics. If you want to help me keep making…
Gi Joe Classified foot stand with dreadnoks logo.
This model is compatible with the lego system.
break the fin and glue the armor on
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Dreadnaught configuration. The figure depicts the Artificer after activating the Giant Stature ability. Check out the…
Vordred The Paladin Slayer - AQW "MORE SKULLS" RESIN
Hallo zusammen, ich habe für den FLSUN Q5 eine Aufnahme konstruiert, die einen SD-Kartenadapter aufnehmen kann. Das mit den Mikro-SDs war mir einfach zu fummelig. Es gibt zwar einige Halter, aber die haben mir einfach nicht gefallen ;-).…
The Dreadweaver is a terrifying hybrid creature, combining the features of a spider and a scorpion. Its elongated, jointed legs allow it to move swiftly across any terrain, while its venomous stinger, arched high above its body, threatens…
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaa
Sometimes Bread goes moldy... and at other times, It just goes plain bad! Show them what it means to part bread! This one is a free(Yes, go ahead and download!) figurine from the Capsule chibi project at https://www.patreon.com/capsule ,…
Erupting Dreadwolf from Magic the Gathering for Spooky Season If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
Its Dreadnought from WARHAMMER 40k, on factory base
Escue is powered by the storm missle, and is either very difficult or trivially easy depending on if you've collected the screw attack early. I've done so many speed runs I don't know the intended way to fight this boss in order. Plus you…
☠ Bonewing Dreadwyrm Huge Undead (Dragon), Chaotic Evil Armor Class 19 (natural armor) Hit Points 225 (18d12 + 108) Speed 40 ft., fly 80 ft. STR DEX CON INT WIS CHA 24 (+7) 10 (+0) 22 (+6) 14 (+2) 13 (+1) 16 (+3) Saving Throws DEX +5, CON…
Acoustic Guitar Cort Earth Mini Soundhole Cover 3/4 size mini dreadnought. Maybe it will fit other models as well.
Vhorlath Realms – Season II: Shadowed Empires The Hellgate Dreadguard is a heavily armored demon guardian, shaped for dark fantasy settings of infernal gates, cursed fortresses, and volcanic strongholds. Armed with a brutal axe and a…
Novelty spongebob with dreads instead of legs
Bring your tabletop games to life with this highly detailed Dread Knight of the Lion . This miniature depicts a fallen champion or a dark paladin, adorned in ornate plate armor featuring lion motifs and macabre skull trophies. Standing…
A dread saurian model posed and ready for printing and painting. I've also included the blender files with the skeleton so you can pose it yourself.
Gorvath the Headsman is the Gravefang Tribe’s brutal answer to judgment, punishment, and fear. A towering executioner clad in battered armor and draped in trophies of the slain, Gorvath strides across the battlefield with cold purpose,…
This model is compatible with the lego system.
The Banished dreadnought is a Banished capital warship utilizing heavily modified Covenant ship hulls upgraded by the Irusk Workshop. While initially created to support Jiralhanae's planetary occupations, they have since become a lifeline…
This is a candy token holder for the game, ‘Dreadful Meadows’. I designed it to be able to fit into the current organizer. They can be removed and placed on the display board for faster setup and gameplay.
Based on the character Judge Dread. You may need to scale this to your desired size.
The Dreadnought Model I made from a side and top view Category: Art
The medium destroyer was one of the playable ships in the now defunct game Dreadnought. Medium Destroyer Destroyers are offensive ships that balance weaponry, survivability and maneuverability. The medium destroyer, built by Jupiter Arms,…
Under desk mounting bracket for SD card reader UGREEN 2-in-1 USB 3.0 SD/TF Card Reader https://www.ugreen.com/products/usb-3-0-card-reader-with-sd-tf
Its Dreadnought from WARHAMMER 40k, on battlefield base
The small arms are a bit weak and broke with PLA. In PETG it worked fine. Fusion file is included so feel free to remix it :)
Tired of the high seas hassle? Conquer clutter with this custom board game insert for Rum & Bones! Spend less time sorting and more time swashbuckling with this premium insert, specifically designed to tame the treasure trove of…
This is a stylized head of a guy with like a dread afro type of thing. Category: People
My wife bought one of these thermometers to put in a first aid kit for a trip she is taking. The issue is that the power button keeps getting pressed, and it turns on. The holder prevents this. Add a rubber band to keep the thermometer in…
one weapon please add one if you don't have one print twice. Miku is here too :).
A 6mm/8mm Epic Scale Alien Dreadnought and textured base for your grimdark and sci-fi tabletop wargames. If you like this model please check out the entire army here...…
Transcend USB3.1_3.0 TS-RDF9K three_and_a_half_inch panel to insert it in the PC Tower. It fits perfectly in my Chieftec mesh series Print Settings: 3 Walls 5 Top 4 Bottom 20 % infill Support on build plate only Enjoy ! Print Settings…
Now you can add yet another option for releasing your magazine onto your Lynx. This tool is used to add the appropriate geometry to the Stock component on the Lynx. Look at the screenshot to see where to align the melder tool. Theres also…
This is a modified version of the top lid of collingall's GBA Consolizer shell, since a while ago I tossed out the idea of Samus themed shell. So here you go. Print all pieces facing down. If the pointy corners lift, try using a brim or…
A six legged land ship of my own design. Category: Models
Tried of picking up lose bills? Sack full of coins weighing you down? NO MORE! Now you can just swipe your card and keep shopping. This toy pinpad with card reader makes a great addition to any play store. update added a second file that…
This is a stand for SD card readers from Delkin Devices: Delkin USB 3.0 Dual Slot SD UHS-II and CF Memory Card Reader (DDREADER-44). I printed the stand almost upright, so that both the stand's installation area as well as the visible…
This print is scaled to 100% from the original model, although when making the stand initially, I did scale the model itself down to 95% to allow for ample brimming on my plate.
The medium tactical cruiser was one of the playable ships in the now defunct game Dreadnought. Medium Tactical Cruiser Tactical Cruiser are support ships that can render in-battle repairs. The medium tactical cruiser, built by Oberon, is…
recommend higher print volume for extra durability (credits to the concept artist)
Finishing the fine work by Antoniomonteiro. Adding the missing top jet engine, floor and fin inserts to have a complete seal when the doors close. Please note that I only designed the enhancements and supplements based on the original…
This was a humorous lil idea i had for the flash hair contest. Materials: ¾ in garden hose Superglue Fishing line Cutting tool The premise is pretty simple. Its fitted for ¾ in garden pipe but can be scaled up using the scale tool and…
Here's the "Dreaded Drut" character from a video game I wrote in cough 1982 cough for the Radio Shack TRS-80 computer. I've also included a half size keychain version with a little loop on it for adding to a keyring or backpack. Volcano…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Stand for Kingstone MobileLite Plus SD Reader . Link on reader: https://www.kingston.com/en/memory-card-readers/mobilelite-plus-sd-reader Easy to print no supports.
Samsung CardReader Plug for Samsung RC-520.
Hardware needed: 6x M3x20mm Screws and Nuts Please get in touch if you think the files need any adjustments.
"Sleep no more, child... The Sandman is here, and he's not giving you sweet dreams." Bring home a truly bone-chilling, personalized version of the classic spirit with this high-fidelity, static-pose figure of the Dread Sandman. This…
Tray/compartment to hold sugar/sweetener packets in the “Mindreader” tray for the Keurig coffee machine
a dreadnought from Warhammer that i made im sorry if the legs or fingers brake
An additional matching card box to fit the cards for the new domain in the Daggerheart Hope & Fear expansion. Print this to use with existing project - Daggerheart 3x3 Card Holder Set with Engraved Domain Symbols & Dice Box
A case with slide on Lid for the Magnetic MagSafe UGREEN USB-C SD CardReader.
