Search results: ds

Sort order

29,265 models

Collapsing Broadsword (Print in Place)

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Print approx. €9.43–€11.53 excl. taxPreliminary estimate for one variant

Downloads
8,072
Likes
1,002
Rating
4.85
P
Printablesprntmkr

Earbuds cleaning tool - Remove earwax easy!

Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
5,968
Likes
1,293
Rating
4.78
P
Printablesoriddlero

Ultimate Printer Knob Upgrade - The Best Knob of Both Worlds (Precision/Comfort & Speed)

It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
5,042
Likes
1,492
Rating
4.89
P
PrintablesAltair3D

Simple Book Ends

These are simple book ends. My wife was need some while organizing her book shelf, so I sketched some up.

Print approx. €11.73–€14.34 excl. taxPreliminary estimate for one variant

Downloads
3,206
Likes
347
Rating
4.93
P
PrintablesNight Raid
18+

The source marked this model as adult content.

Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant

Downloads
2,868
Likes
329
Rating
4
P
PrintablesPrintedGuy

Beautiful and elegant car organizer attached with velcro (for phone, cards, pen)

Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…

Print approx. €8.11–€9.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,809
Likes
1,432
Rating
4.88
P
PrintablesDoMakePrint

SanDisk Extreme Portable SSD (SDSSDE61) Compact Case

Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
2,612
Likes
492
Rating
4.85
P
PrintablesCalebTimoteo

Snoopy and Woodstock (Peanuts) - Home Decoration

Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)

Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant

Downloads
2,312
Likes
381
Rating
4
P
PrintablesSaddamCZ

Customizable board game (Carcassonne) tile grids

My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…

Print approx. €6.45–€7.88 excl. taxPreliminary estimate for one variant

Downloads
1,990
Likes
283
Rating
4.97
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
1,699
Likes
329
Rating
4.33
P
PrintablesORDEEP

Logo Harley Davidson

Logo is made with 3 color changes per layer for those who don't have a color system

Print approx. €3.65–€4.47 excl. taxPreliminary estimate for one variant

Downloads
1,630
Likes
164
Rating
5
P
PrintablesPrintaUser

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant

Downloads
1,519
Likes
193
Rating
4.64
P
PrintablesGlennovitS 3D

Beautiful Game Box (For Cards or Dice)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant

Downloads
1,358
Likes
454
Rating
4.88
P
Printableshandell

Harley Davidson Plaque

made this for a friend, they loved it 9in flat black PLA could probably paint the front surfaces with orange and white to make it pop! If anyone needs the vector file please email me at [email protected] Print instructions I used…

Print approx. €6.55–€8.00 excl. taxPreliminary estimate for one variant

Downloads
1,327
Likes
110
Rating
4.88
P
Printableshandell

Harley Davidson Plaque 2

I made this for a friend, they loved it 9" plaque If anyone needs the vector file please email me at [email protected] I added a hook and raised the white lettering so you can swap filaments in order to achieve a 3 color plaque Print…

Print approx. €6.09–€7.44 excl. taxPreliminary estimate for one variant

Downloads
1,256
Likes
124
Rating
4.91
P
PrintablesFusedForms

Earbuds / Phone Port Cleaner With Grip

A simple and fast print to help clean earbuds and phone charging ports. It features a textured side to help with grip, and the tools on each side are the perfect size for cleaning an earbud or getting dust out of a phone's charging port.…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
1,187
Likes
155
Rating
4.45
P
Printablesbaldsealion

Steam Deck + Dock Carrying Case Insert US Plug (two MicroSDs Slot)

Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…

Print approx. €5.74–€7.02 excl. taxPreliminary estimate for one variant

Downloads
1,186
Likes
131
Rating
4.67
P
PrintablesSheepMe!

Stackable Baskets Organizer System with Lids (Hexagon Edition)

I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…

Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant

Downloads
1,014
Likes
521
Rating
5
P
PrintablesDavid Kisel

Ashtray Harley Davidson

Ashtray with a logo. Harley Davidson. Colorchange if you want it original.

Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant

Downloads
959
Likes
136
Rating
5
P
PrintablesIan Foulds

Dragon Book Ends

These are bookends made using the MakerBot Longhuo model. I printed in tricolour PLA and black PLA+. I have made models so that you can print it in one piece DragonBookendFront and DragonBookendBack. Or as I did, you can print it in…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
945
Likes
285
Rating
5
P
PrintablesDanielAlex

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
935
Likes
150
Rating
5
P
PrintablesMiguelB.

sunflower seeds bowl / Bol para pipas, pistachos, etc.

Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…

Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant

Downloads
909
Likes
96
Rating
5
P
Printablesmsystems

Lids for DeskNano x300

Lids for DeskNano x300. Supports pretty much any cooler. Cutout and Mesh styles. Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with…

Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant

Downloads
848
Likes
17
Rating
5
P
PrintablesAlain74Martel

Cylinder Maze Model 1 with Christmas themed Lids

Cylinder Mazes by 3DFabXYZ.com With 3 different Christmas themed Lids. Are you looking for an unusual gift idea? Or a unique toy for someone special? Do you like solving puzzles? For a truly multi-functional object, 3DFabXYZ is proud to…

Print approx. €8.08–€9.88 excl. taxPreliminary estimate for one variant

Downloads
846
Likes
98
Rating
4.75

Altoids Knife, Fork & Toothpick

So this is a remix of https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit made by https://www.printables.com/social/242064-ruben-martins/about I love things that fit in Altoids Tins. I made it so it fits in an…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
827
Likes
292
Rating
5
P
Printables3DJG

Platonic Solids

Platonic solids, a classic. It includes an exhibitor with their names. You can print it in Catalan (Base_40_cat), Spanish (Base_40_es) or English (base_40_en). Combine your favorite colors. New: Also see this new version with a circular…

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
733
Likes
37
Rating
5
P
PrintablesLouis

Balancing Alien Monkeys - Kids Skill Game

Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…

Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant

Downloads
679
Likes
261
Rating
4.89
P
PrintablesTaiwanRider

Harley Davidson keychain

easy print and cool keychain , cool if you print with black and orange PLA gcode include printer gonna stop at layer 23 to change filament

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
663
Likes
77
Rating
5
P
PrintablesMrViddy

Harley Davidson Poker Chip Display Frame

Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…

Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant

Downloads
647
Likes
122
Rating
5
P
PrintablesLupi

Print approx. €4.63–€5.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
605
Likes
103
Rating
4.33
P
PrintablesSeridyan

Smart Wallet for 12 Cards

I tend to have a lot of cards under my sleeve, so I redisegned the wallet to be able to fit 12 cards. Print instructions !!!==>> BOM 1xM3 8mm 3xM3 5-6mm<<==!!! 100% Infill ==============================

Print approx. €4.44–€5.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
532
Likes
64
Rating
4.4
P
PrintablesDVs3D

Peanuts - Woodstock Freestanding Remix

Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
489
Likes
31
Rating
4.67
P
PrintablesKen Levasseur

Archimedean Solids

The Archimedean solids are the 13 polyhedra that are convex, have identical vertices, and their faces are regular. They don't include the Platonic solids, which have identical faces. All 13 can be listed in Mathematica with the expression…

Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant

Downloads
487
Likes
65
Rating
5
P
PrintablesORDEEP

Harley Davidson Magnet

Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
486
Likes
77
Rating
4.83

Human skull / lidská lebka

Human skull model created by direct conversion from CT scans. A world famous doctor (and our good friend) actively working in the field of surgery provided us with her skull for study purposes. The model is created by conversion from CT…

Print approx. €22.74–€27.79 excl. taxPreliminary estimate for one variant

Downloads
458
Likes
242
Rating
0
P
PrintablesTomek

Christmas gift boxes - super fast (vase mode) with slide-in lids

Three gift boxes to chose. Print both pieces in vase (spiral) mode. Use enough bottom layers to form 1mm solid base (i.e. 5 layers for 0.2mm layer height). Use 0.8 - 1.0 mm line width (this is External Perimeter parameter in Prusa Slicer).

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
453
Likes
213
Rating
5
P
PrintablesPavel

footprint cookie cutter / vykrajovátko lidské stopy

of course it's a yeti paw, bon appetit samozřejmě že to je stopa yettiho, dobrou chuť

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
451
Likes
65
Rating
5
P
PrintablesSASSy Design

Bismuth Star - Winter and Christmas Ornament - 100 000 Downloads Special

Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
450
Likes
261
Rating
5
P
PrintablesPeter H

MICRO PAINTERS PYRAMIDS

EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
448
Likes
166
Rating
5
P
PrintablesmoWerk

Photo Card Holder | Picture Frame | Kpop & Pokemon Collectible Cards

Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
438
Likes
74
Rating
5
P
Printablesalternatywny

Cotton Pads & Swabs Holder

It's a variation of simple holder for cotton pads and swabs. Printing Settings Print position: default orientation Material: any Supports: No Layer height: 0.2 mm Infill: 5% Nozzle: 0.4 mm

Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
433
Likes
35
Rating
5
P
PrintablesFC2M3D

Heart Pyramids Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Variable Height: Change height from 2 layer to the end to 0.1mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
418
Likes
85
Rating
4.5
P
Printablestobiwankenobi

Gridfinity 2x2 for 21mm Liquid Bottles e.g. Vape Liquids 10ml

A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.

Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant

Downloads
410
Likes
42
Rating
5
P
PrintablesMetikumi

Cotton Tips and Pads Container

I found several designs for cotton pads and tips holders, but none had the dimensions and shape I liked. So I created this parametric version for my purpose. The print you see was made using Prusament Galaxy Purple. Use the gcode file for…

Print approx. €17.56–€21.47 excl. taxPreliminary estimate for one variant

Downloads
397
Likes
81
Rating
4.86
P
Printablesifon

Mini Cotton Pads and QTips holder

I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…

Print approx. €4.32–€5.28 excl. taxPreliminary estimate for one variant

Downloads
388
Likes
45
Rating
5
P
PrintablesDom

Peanuts - Woodstock

This is Woodstock ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5…

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
341
Likes
48
Rating
5
P
PrintablesColorsinbloom

Platonic Solids

Created this minus the cube to help learn with Fusion 360. My daughter is learning about Platonic solids in school at the moment. She asked if I could print her a set for each classmate. So this is the end result. Feel free to use however…

Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant

Downloads
333
Likes
36
Rating
4.75
P
PrintablesRichard

Thorin Oakendshield´s ring

Let me introduce you to my adaptation of Thorin´s ring from movie Hobbit. The ring is designed in Fusion360. The inner diameter is 20mm so anyone can scale it in slicer to own size of finger. I tried to apply some blue color to the place…

Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant

Downloads
328
Likes
62
Rating
5
P
Printablesrem

DS Lite / GBA SP / Boxy Pixel Unhinged stand for Game Boy and Nintendo DS Lite

Prints happily at 0.3mm layer height (or adaptive if you're using PrusaSlicer) - no supports required.

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
41
Rating
4.67
P
PrintablesDom

Peanuts - Snoopy & Woodstock

This is Snoopy & Woodstock ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
316
Likes
70
Rating
5
P
PrintablesSeppo

Eat sleep 3D-print repeat coaster for printing-nerds

This coaster is a perfect choice for every 3D printing nerd. It's easy and fast to print. Feel free to share your own experiences with the community. Design by Jaroslaw Krawczyk found on MyMiniFactory:…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
302
Likes
79
Rating
5
P
PrintablesCD PROJEKT RED

Cyberpunk 2077 — V’s Crash Pads

Damn, kid. Lucky you had these. Maybe stick to four wheels next time; leave the bikes to that partner o’ yours. These crash pads really do the job though, huh? Some of my patients rock just one or two, but four on each arm is the way to…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
300
Likes
126
Rating
5
P
PrintablesPeter Farell

McDonalds Grimace Shake.

Mcdonalds Grimace Shake.

Print approx. €8.70–€10.64 excl. taxPreliminary estimate for one variant

Downloads
279
Likes
60
Rating
0
P
Printablesvain1222

Russian Railroads (RZD) Keychain - Брелок ржд

Keychain with the logo of RZD - Russian railroads, best to print face down for better surface result Size on picture, print time with 0.2 layer height and 35 speed - 13 minutes Брелок с логотипом ржд - советую печатать лицом вниз,…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
17
Rating
0
P
PrintablesKirk.D

Windshield Washer Fluid Cap

This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
263
Likes
22
Rating
4.67
P
PrintablesTeo_211

Harley-Davidson Street Glide Wall Art

Harley-Davidson Street Glide Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
37
Rating
5
P
PrintablesWisersDulux

Borderlands Vault Key skull key and borderlands 3 key

Borderlands Vault key-Has texture on the upper print side of the skull plate to mimic the detail in the game art. Printed here in Silk PLA gold/silver blend Borderlands 3 Golden skull key as pictured- Printed in yellow with some slight…

Downloads
258
Likes
67
Rating
5
P

Kubek Harley-Davidson i Hellcat

Kubeczki z logo Harley-Davidson i Dodge Hellcat

Print approx. €7.96–€9.73 excl. taxPreliminary estimate for one variant

Downloads
256
Likes
39
Rating
0
P

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant

Downloads
246
Likes
26
Rating
5
P
Printablescq

Tin Can Lids for Fridge Storage

Cover up your pineapple slices, soups and baked beans easily with these lid than presses onto an opened tin can to store in the fridge. A simple press on lid for a can of Dole Pineapple Slices(85.5mm diameter), Standard Cans(e.g.…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
96
Rating
1
P
PrintablesMrViddy

Harley Davidson Route 66 KeyChain

4mm base with 0.8mm lettering sticking out Strong keychain i Put 100% infill for better strength

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
243
Likes
51
Rating
5
P
PrintablesSebastian

Motorized Camera Slider with WiFi (DSLR time-lapse)

The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
239
Likes
333
Rating
5
P
PrintablesKtowns

Good job coin with solid words for school classroom or home good deeds

Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
234
Likes
38
Rating
5
P
PrintablesTim A.

3Dsets Landy Mini Realistic Towbar + Trailer Coupling

This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…

Print approx. €0.63–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
231
Likes
33
Rating
5
P
PrintablesUko

Cotton Pads Holder

Pairs well with the printable Mini Cosmetics Bin . You can also find a lid in the Extra folder if you're afraid that dust will collect on the pads

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
226
Likes
40
Rating
5
P
PrintablesThird Dimension

Brown bear skull moveable jaw lifesize printable on the Prusa Mini+ 3Dscan

The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…

Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant

Downloads
225
Likes
72
Rating
0
P
PrintablesMakafab

Sanitary pads dispenser

I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…

Print approx. €3.52–€4.31 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
38
Rating
4.33
P
Printablesasphaltbuffet

Snap-in Lids for Desktop Dumpster

2025-01-31 UPDATE As noted in the comments, this snap-fit increases the risk of breaking a hinge on the dumpster. I recommend pressing in toward the edge of the dumpster so that it doesn't stress the hinge in a direction that is…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
15
Rating
4.25
P
PrintablesPeter Farell

Wizards Medallion

Wizards Medallion.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
213
Likes
51
Rating
0
P
PrintablesMartin

Washing pads and cotton pads holder

An addition to my home accessories collection. Holder for cotton swabs and ear buds. Wife loves this design. Printed with PLA white 2 layers 15% infill (I choose Gyroid) I would be happy for feedback. Thanks It's going to print tomorrow,…

Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant

Downloads
211
Likes
15
Rating
5
P
Printablesmaxmar

Stands for Braun Razor/Trimmer/Groomer and Accessories (Ablagen für Braun Haarschneider und Zubehör)

Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
27
Rating
4.5
P
PrintablesNuvz

Two Simple Boxes with Lids - gift box - parts box

2 small boxes one is 79mm x 99mm x 55mm with a detached lid. The other is 50mm x 75mm x 30mm. They are light weight and basic. The box and lid print together. These work great for storage or gifting. Update: I added separate .stl files…

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
19
Rating
5
P
Printablesravi72munde

Kitchen hook to hold lids

A simple as the hook can get. Use a command strip or fix it using a screw

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
72
Rating
5

Pringles Cans with Press-on Lids

Didn't see them so I made them. Let me know if you want more sizes.

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
25
Rating
5
P
PrintablesSteveW91

Functional Jar Lids

Let me know if you have any ideas for other functional lids I could design to add to the collection. Us Australians love our Vegemite, so this is a way to re-use all those empty Vegemite jars and make some cool functional prints! So far I…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
78
Rating
0
P
PrintablesPeter Farell

Mary Ann Atwoods Rosy Cross Pin

Mary Ann Atwood - The Rosy Cross Pin

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
188
Likes
41
Rating
0
P
PrintablesJFKonstruiert

OLD (and G4) L-boxx SDS Plus drill bit holder

I adjusted Jevermeister's drill bit holder for mounting pattern in older style L-Boxx lids. It does fit the new G4 version as well, but not as universal as the original design. Fits 5 SDS Plus dill bits per holder. 2 holders can be…

Print approx. €1.40–€1.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
186
Likes
36
Rating
5
P
Printablespjvenda

Prusa MK4/MK4S bin - modified with accessory cover and two clips + new lids

This is an accessory or waste tray for the Prusa MK4/MK4S 3d printer. It is a remix with a few tweaks of my preference: Added a second clip to attach box to printer frame extrusion Added an accessory cover out of another published model…

Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
19
Rating
4.43
P
Printablesspalex

Car sauce holder for KFC and McDonalds

Print it, shove it into your air vent and enjoy.

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
23
Rating
0
P
Printablesgex

Ananas Pen Cup (Vase Mode) with Lids and Separators

Details I wasn't completely satisfied with my previous design so I fine-tuned that idea. And while I was perfecting those little bumps I started thinking about a solution to make it more rigid. The result is a lid that seamlessly fits…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
180
Likes
64
Rating
5
P
PrintablesRostaP

Windshield for YAMAHA XSR 900

One of my first practical models. I printed from PETG and it has worked perfectly for more than two years. Uploaded model of windshield is without picture of the biker. For assembly you need (windshield with the holders) 2x Allen screw M6…

Print approx. €15.71–€19.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
34
Rating
2
P
Printablesneoyarus

Organic Voronoi Phone Stands

How to print The 3mf files have all the support settings configured for you, so you just need to choose your filament profile. Prints just fine with a 0.3 mm layer height, but you can use a lower one to get nicer-looking curves. All the…

Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
36
Rating
0
P
Printablesgeokscott

Motorized Blinds Tilt Servo Control through Home Assistant

I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
24
Rating
5
P
PrintablesMiki

Insert for Sleeping Gods: Primeval Peril

Insert for recently released printed edition of Sleeping Gods: Primeval Peril ( https://boardgamegeek.com/boardgame/362205/sleeping-gods-primeval-peril ). The insert is made for sleeved cards (I've used Gamegenic sleeves, not sure about…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
163
Likes
18
Rating
4.67
P
Printablestjjos

Cuckoo clock hands

The originals broke so I made replacement cuckoo clock hands. The little one is the hour hand while the long one corresponds to the minute hand. Might need light sanding in order to fit properly on the actual clock. I recommend ironing…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
9
Rating
0
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant

Downloads
145
Likes
39
Rating
0
P
PrintablesBigb8

SeedSorter: A mesh sieve converter for Prusament spool

I wanted to grow my bee-friendly-area of my little apartment garden, so needed to get the seeds from the plants. I needed to sort seeds from the dry plant residue and saw the empty spool in my workshop. You can use it for whatever, I made…

Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
40
Rating
0
P
Printablesschneems

DustyBoi: Under Table Vacuum adapter for Delta 52-963 Bandsaw

Here's a video in action: https://www.reddit.com/r/functionalprint/comments/myy667/i_used_to_have_a_dusty_bandsaw_now_i_have_dustyboi/ This attachment removes the dust from the bandsaw blade. The vac attachment is sized for a Festool D36…

Print approx. €7.28–€8.89 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
32
Rating
0
P
PrintablesSaphir

Molding Kit for Cardshuffler-Sealings

This mold is used to make a suitable seal for Lukas Cenovsky's card shuffler from basic materials that are easily available or available in the household. I used hot glue for this, but you can also use silicone, acrylic or similar…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
16
Rating
4.5
P
Printablestermlimit

Woodstock Coaster

I saw a few different Peanuts ideas, but no coasters. Created using https://www.thingiverse.com/thing:2248070 as the base Woodstock. Layer change after 2.4cm All rights to Peanuts. I do this for fun and no support is required. However,…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
16
Rating
0
P
PrintablesHB9GXS

Kids Play BBQ Tongs

my kids broke their play bbq tongs, so here are the new ones...

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
120
Likes
17
Rating
0
P
PrintablesSan G Dice

Dice Mold Housing With Built In Keys/Registers For Making Molds

This is a simple 2 piece, easy to use mold housing for dice, but you can use it for anything you want. It has to pieces which you can attach together with clamps or clips, then fill with silicone over the dice. I use Cricut Transfer Tape…

Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
5
Rating
0
P
Printablesdaroz

Motor Controller Mount for SDS MK4 Swerve Drive (FRC)

Primarily for use in FIRST® Robotics Competition robots that use the Swerve Drive Specialities MK4 Swerve Module , this is an integrated motor controller and CAN bus connecter mount. Designed for FRC team 5881, the Tech Valley High School…

Print approx. €5.23–€6.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
11
Rating
0
P
PrintablesRob Latour

Encloser for two 8 module Max7219 display boards (joined together)

This 3D printed enclosure (three parts: left, middle, right) holds two 8 module Max7219 display boards. Included are the .stl files and the Fusion 360 (source model) .fd3 file. It also requires a front piece of red acrylic plastic 1/8"…

Print approx. €8.67–€10.60 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
13
Rating
0
P
PrintablesJonathan Hofman

Modern look Odroid N2+ NAS housing with 2 HDDs

I created a sleek housing for my Odroid N2+ NAS. It was printed with white PETG to give it a modern look and make it more temperature resistant, but I could imagine that with the current cooling (80mm FAN) PLA could be used as well. It…

Print approx. €22.82–€27.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
115
Likes
20
Rating
0
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
16
Rating
5
P
PrintablesPeter Farell

Basic Ukulele Chords Chart

Basic Ukulele Chords Chart Color Change at z-height included in gcode.

Print approx. €6.72–€8.21 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
60
Rating
0
P
PrintablesKilika

Door opener, corona, hands free, quick to print, covid

Hi, this is my first model, quick to print in 0.3mm layer height. You just need 2x M5x20mm screws + nuts. The diameter for the door grip is 20mm. To make it fit better, you can put some double sided tape or rubberband between the…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
99
Likes
4
Rating
0
P
PrintablesMatěj Bartoš

Zelmer heads to Kärcher- vacuum cleaner adapter/redukce hlav vysavačů zelmer na vysavače kärcher

This simple model is only my desing it isn´t remixed or download on thingivers or others. (i know i poste it twice, bacuse previous print is printed more than hour)/Tento jednoduchý model je z mé hlavy a není stažen z internetu ani není…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
20
Rating
5
P
PrintablesPlatzhalter

Benq Screenbar adapter for displays deeper 3cm e.g. from Eizo -- Adapter um die Benq Screenbar für Bildschirme tiefer 3cm zu verwenden z.B. von Eizo

I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…

Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
96
Likes
8
Rating
4