Search results: e10

Sort order

Counting matching models…

P
PrintablesNebulaNoob

Team Eggman Figurine Set: Eggman, Metal Sonic, Infinite, E102-Gamma, Sage, and Chaos Amiibo Figure's

Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…

Downloads
909
Likes
93
Rating
5
P
PrintablesJerryie

E100 German WWII super heavy tank

E-100 Tank Model 1:72 This model represents the German E-100 super-heavy tank with several build options: Tracks & Skirts No-skirts version : tracks are attached using 4 connectors . Full-skirts version : tracks already have built-in…

Downloads
737
Likes
174
Rating
5
P
Printablestato_713

Samsung Galaxy Note10 n970 case

Originally published here: Samsung Galaxy Note10 n970 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will…

Downloads
599
Likes
17
Rating
3
P
Printables3D NINJAS

Smallrig Sony ZVE10 Cage Camera Scan

Scan of a Smallrig Sony ZVE10 Camera Cage for reengineering Important: The 3D Print Resolution Version is for this camera handle : https://www.printables.com/model/1134961-smallrig-camera-handle-with-hot-shoe-adapter

Downloads
594
Likes
23
Rating
0
P
Printablesfirstgizmo

E10 Lamp Socket

It is intended to replace a E10 Socket without the need for additional hardware or soldering. Two versions are available. One for surface mounting and one for hole mounting. If you need to make them fit for your particular use case,…

Downloads
547
Likes
96
Rating
4.5
P
Printablesmilanvdzanden

Waffentrager E100

This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles

Downloads
529
Likes
24
Rating
0
P
PrintablesAdmiralSym

Note10+ Slider Terminal Case

This is a Bluetooth sliding keyboard case for the Samsung Note10+. This is the first complete iteration of this design, but it still requires a decent amount of refinement to be where I'd want it. Issues/Action Items: The keyboard bezel…

Downloads
374
Likes
70
Rating
0
P

Hifiman HE Stand for Arya, HE1000, and Jade series headphones with Dekoni pads

Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.

Downloads
373
Likes
21
Rating
5
P
Printablesanonimowy891

Sony ZV E10 Rig

Before you buy alloy rig just check cheap version, for sure it is for you :P

Downloads
343
Likes
47
Rating
5
P
PrintablesCatharsis69

Panzerkampfwagen E100

Geetech PLA Matte Grau BambuLab X1C Mit Supports

Downloads
316
Likes
35
Rating
4
P
Printablesfotomas

Weller WE1010 Stand

Put your soldering iron stand on top of the Weller WE1010 main unit to save some desk space. Hooks under the edge above the display, to maintain balance. Mounted using the rubber feet through the printed part into the soldering iron…

Downloads
285
Likes
52
Rating
4.94
P
PrintablesCastIronFace

DeWalt compact blower snorkel (DCE100)

I love my little blower for getting rid of sawdust from the garage, but the inlet is on the left side and is always getting stuck on my shirt. I'm sure that I am losing a little efficiency with this, but it still works for my needs. Print…

Downloads
245
Likes
34
Rating
5
P
PrintablesCollingall

DE10 Nano CAD Model

I needed a model of the DE10 Nano for a future project. No one had posted one yet so here you go. This is not meant to be printed but used for creating cases and the like. Category: Gadgets

Downloads
232
Likes
7
Rating
0
P
Printables3D NINJAS

Sony ZVE10 Camera Dummy

This is my Sony ZVE10 Camera Dummy Scan. Have fun and build nice things for your ZVE10.

Downloads
222
Likes
13
Rating
0
P
PrintablesSensha_Vor

E100 (World Of Tanks Ver)

Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…

Downloads
222
Likes
41
Rating
0
P
PrintablesNora

E100 Easy Print

Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…

Downloads
217
Likes
41
Rating
5
P
PrintablesTom Brazier

VDE100 rotary extruder

See the youtube video for details. The extruder requires three or six MF85ZZ flanged bearings and three or six countersunk M3 screws. The flanges on the bearings need to be ground to 9.1mm diameter edges. Alternatively, pick your own…

Downloads
214
Likes
40
Rating
0
P
PrintablesXabre

ZV-E10 Travel Box

Travel box to protect the Sony ZV-E10 with 16-50mm Kit Lens. Camera will fit snugly and can be secured with a rubber band. Useful when you need to pack the camera for travel and don't want to sacrifice space with packing foam. Printed in…

Downloads
212
Likes
28
Rating
5
P
PrintablesSensha_Vor

E100 (War Thunder Ver)

Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…

Downloads
203
Likes
40
Rating
0
P
PrintablesStarBug_Props

Sean Fields E10s Aldhani Blaster

So its a modified Sean Fields mudtrooper E10m with options for resin print and fdm parts (scope/counter etc) There is also options for additional side rail and cattle prod rail as these were seen on Andor also . Thanks goes to Project 842…

Downloads
182
Likes
44
Rating
0
P
PrintablesDuncan Meyer

the100 "3-Way 235 Mod" by Duncan

NB This is a WIP Background: Modern 3D printers are printing FAST nowdays. But you don't have to spend a fortune on a Bamboo Labs top of the line printer. Believe it or not, if you have a printer with a 235x235 bed (like an Ender 3) you…

Downloads
172
Likes
47
Rating
0
P
PrintablesKNfLrPn

DE10-Lite Case / Box

A simple protective case for the DE10-Lite. Designed to be simple but effective, the standoffs fit into the holes and the board clips into place. Designed for 0.2mm layer height and 0.4mm nozzle. Can be printed with no infill with 3+…

Downloads
162
Likes
4
Rating
4
P
PrintablesReefwalker

Fluke101 Mount for Honeycomb Storage Wall

This mount has been designed using a 3D scan of the Fluke 101 Multimeter. I initially designed it neglecting to consider print orientation, so the print will require supports. Print this in whatever material you like. I used polymaker ASA…

Downloads
161
Likes
40
Rating
5
P
PrintablesMartijn Janssen

Weller WE1010 soldering station holder

I was looking for a way to move/store my Weller WE1010 soldering station, without moving the 2 parts individually. So I created this simple solution. Print with 4 walls and 42% infill minimally, as the left part is quite heavy.

Downloads
159
Likes
27
Rating
5
P
PrintablesMartin

Sony ZV-E10 Storage Box

Nice little box for the Sony ZV-10 camera with the kit lens. The extra space can be used for an additional accessories, such as battery, cables, SD cards, etc. The lid fits loosely on top and is held in place by 8 5x3mm magnets. They…

Downloads
147
Likes
17
Rating
0

Under Desk Mount for FiiO E10K Headphone Amp

Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.

Downloads
130
Likes
12
Rating
5

Messerschmitt Bf109 / Me109 Scale Tyres for Wheel

Scale Messerschmitt Me109 tyres with 90mm outside diameter.

Downloads
128
Likes
6
Rating
0
P
Printablesgaspain

Mic ear hoodscoop for Sony ZV-E10

I don't think it actually does anything according to my basic tests, but you can check it out-try it out.

Downloads
127
Likes
26
Rating
5
P
Printableshellobritt

FIIO E10K (Olympus 2) Headphone DAC Under Desk Mount

Print Details: Overture PLA, Black .4 nozzle, .2 layer height 15% infill no supports I used 4 M3 16mm long screws to mount to the underside of my desk. DAC friction fits in the mount, and abuts the stop in the rear of the mount.

Downloads
120
Likes
11
Rating
5
P
PrintablesCNC Kitchen

Anet E10 - Improved Fan Shroud

I designed an improved fan shroud the Anet E10 which solves the temperature issue and improves part cooling. You can also find the sliced GCODE in the download section. If you want to buy an Anet E10 and want to support my YouTube channel…

Downloads
118
Likes
11
Rating
0
P
PrintablesFunkyskull

PCB Klicky Mounts for The100 v1.1

Custom PCB Klicky Mounts for the ‘The100 v1.1’ printer. The100 v1.1 printer PCB Klicky Probe Mount the100_pcb_klicky_connector_plate.stl Designed to replace stock Connector Plate.stl on the toolhead. Places the PCB klicky probe inline…

Downloads
116
Likes
18
Rating
5
P

E10 LED-Birne f. DUX KINO 68

DUX KINO 68 Erstz-E10 LED-Birne. Gedruckt, Mat: PLA (PETG, ABS oder PC, auch denkbar) Das Teil wird mit einer möglichst hellen, weißen 5mm LED bestückt Auf Polung achten! Füllung 100% Getestet, funktioniert

Downloads
113
Likes
6
Rating
0
P
PrintablesEivind Husby

Weller WE1010 Multiboard Shelf

I'm trying to clear as much desk space as possible, so I made this shelf to get my Weller WE1010 out of the way, but still being close enough to use it without moving it. It uses the Multiboard 6x6 Push-Fit Bracket upside down, with small…

Downloads
111
Likes
28
Rating
5
P
PrintablesNanodesigner

Cuscinetti lineari LM6LUU- LM8LUU- LME10UU- LM12LUU- LM16LUU- LM20LUU- LM25LUU- LM30LUU- LM40LUU- LM50LUU

Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…

Downloads
105
Likes
5
Rating
0
P
PrintablesTravockMD

Tuya Zigbee temperature humidity sensor stand (MIR-TE100-TY / TS0201)

The stand provided with the Tuya Zigbee temperature and humidity sensor was wobbly and in an angle. I prefer a more sturdy and vertical stand. I spent some time in Fusion360 and came up with this stand. Posting a make and liking the model…

Downloads
105
Likes
17
Rating
5
P
PrintablesDanMaster

The100 BTT Pad 7 mount

I designed a mount for the BTT Pad 7 to connect direct to the bottom Frame for THE100 printer from MatThePrintingNerd

Downloads
104
Likes
12
Rating
0
P
PrintablesLuu

Gridfinity Canon LP-E10 Battery Holder

I have created this support for the canon lp e-10 batteries and combine them with the gridfinity organization system, since I always had them scattered around the studio and this way I have them more at hand in the drawer. In my case I…

Downloads
102
Likes
16
Rating
5
P
PrintablesAndrew Keyser

Brass Sponge Holder for Weller PH 70 Safety Rest (WE1010NA & others)

This is an insert for the Weller PH 70 Safety Rest that holds a Weller Soldering Brass Sponge cleaning pad. Easily transform your Wet Sponge-style cleaning pad into a Brass Sponge-style cleaning pad. Model is available in two versions:…

Downloads
100
Likes
20
Rating
5
P
PrintablesAlvomane

Tuya temp/humidity sensor compatible back plates / Befestigungsplatte (Zigbee Model TS0201 / MIR-TE100-TY)

Since the adhesive version of the back plate of the Tuya temperature / humidity sensor (zigbee model TS0201 / MIR-TE100-TY) did not seem optimal in many places, I designed a compatible spare part for the back plate and based on this a…

Downloads
98
Likes
14
Rating
5
P
PrintablesMitch P

Sony ZV-E10 II Magnetic Case

Holds an extra battery and SD card. 8x 1x10mm magnets are used. They are pretty hard to press in, so glue is not really needed. I printed with 4 walls, 4 top/bottom, and 10% infill and it came out to about 300g and 5 hours of print time.

Downloads
95
Likes
14
Rating
0
P
PrintablesMichael Schmitt

4 Rod Bed Mod for The100 V1.1

0.2mm 25% Infill PLA Rod Length 224,5-225mm

Downloads
91
Likes
14
Rating
0
P
PrintablesAaron McNiven

TP-LINK TL-POE10R POE Splitter Wall Mount

TP-Link TL-POE10R POE Splitter Wall Mount. Made this to mount my TL-POE10R POE Splitter on the wall. TP-Link really should include something in the box to do this but they don't. Works great. Scale it to 102% and it'll come out perfect.…

Downloads
86
Likes
8
Rating
5
P
PrintablesSamet Muric

Anet E10/E12 MK8 StealthBurner HexFace with BLtouch

This model consists of remixes of several models. I made it according to anet e10 printer, but I think it will fit all printers with wheels in 20x20 profile. There are a few flaws in the model, but I made it work with a few interventions.…

Downloads
85
Likes
11
Rating
0
P
PrintablesUnitaz_38

E100 late turret 150 mm gun

late e100 turret with 150 mm gun

Downloads
85
Likes
7
Rating
0
P
PrintablesSensha_Vor

Jagdpanzer E100

Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…

Downloads
84
Likes
28
Rating
0
P
PrintablesAndrew Rousseau

Inlet guard for DeWalt DCE100 blower

I found upon first use that this blower is only really good for left handed use. When using right handed the inlet keeps getting plugged with my pants. This is a bit over kill to make sure your clothing will not obstruct the air flow but…

Downloads
84
Likes
16
Rating
0
P
PrintablesTheDIYGuy999

1/8 Scale Double Eagle E101 E102 Land Rover Defender Parts

James Bond 007 Spectre fenders are bolted on, using the original holes and screws. Printed in PETG with 10% infill and 0.16 layer height. Housing for 40mm speakers: Printed in PETG with 20% infill and 0.25 layer height. And many more STL…

Downloads
84
Likes
30
Rating
0
P
PrintablesCNC Kitchen

Anet E10 - Improved Y-Belt Bracket

Remix of MrCrankyface beltlock. I adjusted the size that the belts run parallel and adjusted the locking mechanism. If you would like to buy an E10 and support my channel and creations then shop at Gearbest:…

Downloads
82
Likes
27
Rating
0

Canon BM-LPE10 Battery holder

We kindly ask you to please not sell printed versions or copies of our 3D models without being a member of our Patreon. You can join here: https://www.patreon.com/WyattIndustries

Downloads
81
Likes
12
Rating
4
P
Printables2B-3D

THE100 (v1.0) Ender 3 bed mod - Remix

When building a the100 printer, I had issue finding an Ender 2 bed or similar, so when I found a very cheap Ender 3 one I decided to install it based on the mod by overgo. I had to make some changes: my the100 version has only two rods in…

Downloads
77
Likes
20
Rating
5
P
PrintablesDockGuy

Craftsman air compressor gaskets (E100959) in TPU

Why: I picked up a Craftsman air compressor model 921.152101 for free - it ran but wouldn't build pressure past 40psi. Upon disassembly, I discovered blown pump gaskets. Why buy when you can make? So, I whipped these up in CAD (15…

Downloads
76
Likes
17
Rating
0
P
PrintablesKent

Canon LP-E10 Battery Case

I printed the GoPro battery holder from here https://www.printables.com/model/50837-gopro-battery-case and I wanted something similar for my Canon batteries. I printed at 0.2/quality with a brim. The infill setting shouldn't be important.

Downloads
76
Likes
5
Rating
4
P
PrintablesmineRaptor

Counters 1 to 10 for the card game Phase10

Made for Phase10 card game for counting phases. Clipped together. Can be printed in 2 colors at 1.4 - 1.6 mm to maximize contrast thanks to PrusaSlicer. Print Settings Resolution: 0.20 Filament: Prusament PLA Notes: Best be printed in 2…

Downloads
76
Likes
12
Rating
0
P
PrintablesHabag111

Plug mount with cover - for The100 v1.1

[THIS IS A WORK IN PROGRESS.] COMPATIBLE WITH THE VERSION 1.1 OF THE 100 ONLY!!! I made this because the other plug box on printables interferes with the PSU if you use a PSU tray. It also wasn't covering the back of the socket that has…

Downloads
75
Likes
15
Rating
0
P
Printablesray of sunshine

Weller WE1010 Soldering Iron Tip Caddy Backpack for Base. Holds 9!

Built to match the form factor of the soldering iron holding base for a complete look. Material, fill percent, and layer height are flexible. The copy shown was printed in PETG with 0.35-mm layer height and 50% fill. The holes as printed…

Downloads
74
Likes
15
Rating
4.8
P
Printablescartyski

OPENSESAME1000 - Jar Tool

Ideal for smaller jars or bottles, these compact versions offer the same convenience and ease of use. PETG or TPU are recommended for optimal performance. Note: PLA is not recommended for the OPENSESAME1000 due to slight splitting issues…

Downloads
73
Likes
15
Rating
0
P
PrintablesSemaze

Gridfinity | Supvan E10 Holder

A 1x4x6 Gridfinity holder for the Supvan E10 Label maker. This has a few extra features: A cut out for a charging cable and/or a USB C to Micro USB adapter. A small printed “nub” that allows you to press the label maker itself as though…

Downloads
73
Likes
7
Rating
5
P
PrintablesJazzy Justin

ADXL345 Accelerometer Mount for The100 V1.1

Adapter to mount an ADXL345 on top of the 100's toolhead. Uses existing holes atop the hotend shroud. Designed for this (very common) version of the ADXL345 ADXL345 Accelerometer: https://a.co/d/79bJakJ (The wires it comes with aren't…

Downloads
70
Likes
9
Rating
5
P
Printablesgkatev

Fiio E10K desk mount

For mounting a Fiio E10K under (or on top of?) a desk. Differences from the original: Increased height to also accomodate for the rubber feet Bigger knob cutout for convenience (style 2) Slots for coutersank screws A bit smaller…

Downloads
68
Likes
11
Rating
5
P
PrintablesSirMcstoney

Power Supply Tray and Cable Holder The100

I added the cable holder to be a part of the tray since I did not have a way to screw it into the power supply. I also shortened the cable holder box by 20mm so it would not block the Pico at all. I did this in tinkercad and am not great…

Downloads
68
Likes
14
Rating
0
P
PrintablesSamet Muric

Afterburner - Stealthburner with BLtouch - x carriage Anet E10 X-Axis Guide Rod System

Afterburner - Stealthburner with BLtouch - x carriage Anet E10 X-Axis Guide Rod System

Downloads
67
Likes
9
Rating
0
P
PrintablesMatthias Faist

The100 Toolhead on Ender 3 (v2)

i designed an adapter plate to mount the The100 Toolhead to my Ender 3 V2 to be able to test the CHC Pro Hotend, but you could also mount different V6 style hotends its also i great possibility to have good (way too much) cooling on the…

Downloads
67
Likes
14
Rating
3
P
Printablesnfroehberg

Adapter for Silicone Brass Sponge Holder for Weller PH 70 Safety Rest (WE1010NA & others)

Adapter to integrate Weller silicone holder for brass sponge into PH 70 safety rest for soldering iron.

Downloads
67
Likes
7
Rating
5
P
PrintablesTexAg

Cap for Canon LP-E10 battery

No special print settings required. FreeCAD model included.

Downloads
56
Likes
6
Rating
0
P
PrintablesAnanords

FiiO E10K Olympus 2 Desk Mount

Desk mount with 4mm screw holes for the FiiO E10K Olympus 2. I used some 3.5mm wood screws Print with a brim if it doesn't stick to the bed.

Downloads
54
Likes
3
Rating
0
P
Printablesmaarten

The100 printable printer power socket

Print it on its back and you only need supports for the bracket for two of the tree models. Printer settings are the settings as used in the entire The100 project (see git of the project) Use same heat inserts as the entire project attach…

Downloads
52
Likes
13
Rating
4.5
P
PrintablesFunkyskull

Carved and Pinned Gantry for The100 v1.1

In an effort to reduce weight I modified The100 gantry geometry by carving out excess material and replacing m5 bolts with 5x45mm pins. There are holes that can be used to remove pins if needed. Print Settings Designed to be printed with…

Downloads
48
Likes
11
Rating
5
P
PrintablesMalt_Vinegar

Shower Hanger for various phones (Note10+ and

Remix to make the phone area larger to accomodate and Note10+, and to move the phone inside the shower for touchscreen access. Print in place, on its side, and I used 25% infil, and the FF_0.28(extra-fast) profile, in about 1 hour 15 mins…

Downloads
47
Likes
10
Rating
3
P
PrintablesRyuka

Sony ZV-E10 hotshoe mic cover

Made to cover the ZV-E10's top mic array so dust/debris don't get in during normal photography-only use.

Downloads
46
Likes
5
Rating
0
P
PrintablesR3DLayers

Alta Labs Route10 and S8 Switch for 10" Rack

For the best mechanical properties, it’s best to print with ABS/ABS+/ASA. Additionally, I don’t recommend mounting one directly under the other. Both the switch and Route10 can get quite warm :) Unless you have a fan to cool these…

Downloads
45
Likes
3
Rating
0
P
Printablesmsatbsx

Backplate for Elgato Prompter – Sony ZV-E10 (Kit Lens)

This is a custom backplate adapter for the Elgato Prompter, designed specifically for the Sony ZV-E10 with the kit lens. It allows a clean, stable mount of the camera behind the prompter while keeping the setup compact and well-sealed. ✨…

Downloads
45
Likes
9
Rating
0
P
Printablesovergo

THE100 ender3 bed mod (WIP)

This is a work in progress I wanted to see if I could fit THE100 to fit an Ender3 bed. **still require testing** **part is not orientation optimization** and I didn't want to make the printer anymore bigger as in the picture, the color…

Downloads
45
Likes
14
Rating
0
P
PrintablesAdamklosterman

VDE100 remix

work in process project added double bearing version that uses 6 MF85ZZ bearings drill shaft jig to hold shaft from turning in lathe.

Downloads
44
Likes
6
Rating
0
P
PrintablesEivind Husby

Weller WE1010 Stand, extended

I loved the design from @fotomas_336415 , but my situation required some extra clearance in the back, so I moved the platform forward 20 mm. Original description: Put your soldering iron stand on top of the Weller WE1010 main unit to save…

Downloads
44
Likes
8
Rating
5
P
PrintablesPanterA

GutBomb's RetroDeck - Amiga-ish Style for DE10-Nano & MiSTer USB Hub

All the modifications I made to GutBomb's original models were done in TinkerCAD. Printed on modified original Ender 3 (Direct drive, Sprite Extruder, CR Touch) eSun Bone White PLA+ filament used

Downloads
43
Likes
11
Rating
0
P
PrintablesPetr O

Lamp cover e.g. for model public lighting (for E10 bulb socket, e.g. 12 volts)

Cover for low voltage lamps (E10 bulb) to be used esp. for model purposes, like garden model public or other lighting. We use it on our garden railway, as well as in our garden where we have installed 12 volts electricity supply, in order…

Downloads
43
Likes
11
Rating
0
P
PrintablesSpaceventura

Gridfinity SD Card and LP-E10 Battery holder

I had 2 spots left for the gridfinity base in my camera bag and I wanted a holder for additional batteries and SD cards, but as a 1x2 size instead of 2 1x1 sizes Printed with 0.6 nozzle at 0.3 layer height I added another version (2.0)…

Downloads
43
Likes
3
Rating
0
P
Printablesarnmac

Battery Box for storing 4 Rebel T6 batteries (LP-E10)

This is a box to hold 4 LP-E10 Batteries for a Canon Rebel T6. The box is held closed by friction fit. The first few times that you try to open the box you will have to work it open but after a while, it will open easily but not so easily…

Downloads
43
Likes
4
Rating
0
P
Printablesjaddel

Mister FPGA Terasic DE10 Nano Case

This is a case for a minimalistic MiSTer setup with no I/O board and no USB hub board. It is designed for vertical RAM modules and the popular Noctua NF-A4x10 5V fan (any 40x40 5V fan will do the job). When installing the board, make sure…

Downloads
42
Likes
6
Rating
0
P
PrintablesStonXX

Container für die Phase10 Memokartenhalter

Transport- oder Aufbewahrungscontainer für 6 Phase 10 Memokartenhalter https://www.thingiverse.com/thing:5368226 Passt auch in die Kartenmischmaschine Amigo 5000, damit hat man alles Platzsparend beisammen und griffbereit...... Category:…

Downloads
41
Likes
6
Rating
5
P
PrintablesScarecrow

Anet A8 Plus, E10, E12, E16 12mm Y Rod Holder

12mm Y Rod holders for Anet A8 Plus, E10, E12, E16. Created these after the stock flimsy 8mm rods got grooved out. So I decided to replace them with 12mm rods. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Downloads
41
Likes
1
Rating
0
P
PrintablesNorbert Harrer

E10 Socket for Mini Light Bulb

The socket fits an E10 light bulb, the type commonly used in old flashlights. Sometimes also called Miniature Edison Screw or MES or MES10. The socket and base are printed separately and need to be glued together with super glue. The base…

Downloads
40
Likes
7
Rating
5
P
PrintablesSherlock_Ohms

Air Cover Cover Replacement Knobs for John Deer E100 Series Mower

Print in this orientation, with supports and with 3 perimeters.

Downloads
40
Likes
7
Rating
0
P
Printablesjacob goforth

Electronics Tray for The100 Tank

This is designed to mount inside The100 Tank edition frame, and has mounting for BTT Octopus, Raspberry Pi Zero, and power supply. Just use longer screws and nuts where possible to mount the tray to the inside of The100's frame. You may…

Downloads
40
Likes
12
Rating
0
P
PrintablesBaschz Leeft

V-slot Extrusion USB Mount (for i.a. CR-10, Ender 3, Tevo Tornado, Anycubic Kossel, Anet E10, etc)

A simple mount for a USB extension cable to mount a key chain LED light (or other things) to your printer's frame. I used a T-nut and bolt that came as spare parts with the CR-10 to mount it to the frame. To use it on the other side, just…

Downloads
39
Likes
9
Rating
0
P
PrintablesFreckles667

Jagdpanzer E100 Bag tag

This is a very simple change that allows a string to be added so this tank can be a keychain or bag tag. It is also scaled down, a lot. I printed it with a 0.2mm nozzle and 0.08 mm resolution and it works, but it is very delicate, I…

Downloads
39
Likes
3
Rating
0
P
PrintablesFrog01

Jura Impressa E10 Kaffee-Bohnen-Behälter Erweiterung

so konzipiert das nur der Trichter mit stützstruktur gedruckt werden kann alles andere ohne. Griffe 2 mal drucken und mit M3x8 an den Deckel befestigen Trichter wird auf dem Korpus geklebt.

Downloads
39
Likes
4
Rating
0
P
PrintablesEMoon

CR-10 Standalone (Tevo Tornado, Afinibot A31, Anet E10) Printer Base

Introduction The CR-10 format control box is just an ugly nuisance. There's no way to manage the wires well without a lot of effort. It's noisy and takes up a lot of room. Thingiverse and the CR-10 Facebook groups are full of great…

Downloads
39
Likes
6
Rating
0
P
Printablesthatguyisjames

The100 HGX-Lite (Sherpa Mini) Mount

My normal bowden connector kept slipping out of the hole on my HGX-Lite. Made a mount that holds the extruder (upside down) and uses a more securely held M10 bowden connector. The larger M10 style is needed, as the tube passing though and…

Downloads
39
Likes
8
Rating
0
P
PrintablesScarecrow

Anet E10 Y Carriage Plate Corrected

Corrected/Updated Y Carriage support for the Anet E10 for laser cutting. Do Not Recommend trying to print and use. Category: 3D Printer Parts

Downloads
38
Likes
3
Rating
0
P
PrintablesDan3A

Bracket for Fiio E10K headphone amplifier

NOT MY MODEL, ORIGINAL MODEL MADE BY https://www.thingiverse.com/GromMaker. Original description: Bracket allowing you to secure your Fiio E10K to a desktop using two small screws. It slides in with a slight interference fit, but can be…

Downloads
38
Likes
2
Rating
0
P
PrintablesPeter H

SCORE BOARD STAND - PHASE10 AND OTHER BOARD GAMES

This stand is a super fast, simple stand for Phase10 but it will work with any score board that is less than 5mm thick. If yours is slightly thicker it's a very simple job to scale it in your slicer to suit. Let me know if you would like…

Downloads
37
Likes
12
Rating
0
P
Printablestk

3D Printable Parkflyer ME109-K

Inspired from the Thing http://www.thingiverse.com/thing:33102 i wanted to see if it is possible to make an 100% (or so) printed Parkflyer Started at 1st of Jan evening the maiden Flight wasnt done till 6th due to weather so Build time is…

Downloads
37
Likes
5
Rating
0
P
Printablesfajfer

Tenda SE105 10 Inch Rack Mount

Printed in PETG according to the original one

Downloads
35
Likes
2
Rating
0
P
Printablesタケ

NISSAN cherry E10 /Datsun 100A (1970-1974)  Drink holder &小物置き

NISSAN cherry E10 /Datsun 100A (1970-1974) Drink holderです。 bracketを共用で小物置きにもできます。 灰皿の部分にひっかけて、ラジオのダイヤルに差し込んで取り付けます。 ABSやPCなどの耐熱がある素材で製作してください。

Downloads
35
Likes
6
Rating
0
P
PrintablesJoey Lopez

Gridfinity Tray for Supvan E10 Label Maker + Rolls

Prints without supports with almost any filament

Downloads
34
Likes
7
Rating
0
P
PrintablesMahdi pilot

HPI E10 DRIFT

HPI E10 DRIFT CAR

Downloads
34
Likes
6
Rating
0
P
PrintablesMaxResStudios

Fujifilm DE100 Print Catcher

Compatible with Fujifilm DE100 and DE100-XD Photo Printers Can be printed on Bambu Labs printers (barely) with build volume of 256x256x256 or larger. If printed on a CREALITY K2 PLUS or PRUSA XL (350x350x350 or larger), the build volume…

Downloads
34
Likes
5
Rating
5
P
PrintablesDisttrack3D

Bed cable support Anet E10

Español: Es un soporte simple para el cable de la Anet E10 para que no choque con el cable del final de carrera y así no haya impedimento en el libre movimiento de la cama. English: It is a simple support for the cable of the Anet E10 so…

Downloads
32
Likes
6
Rating
0
P
PrintablesGrandGnome

Galaxy Note10+ and Galaxy Watch dock

Charging station for Galaxy Note10+ and Galaxy Watch The hole for the watch charger is 47mm, should fit most galaxy watch chargers. What I changed from the original: Made the phone holder 3mm wide and deeper, as to fit my phone case. Made…

Downloads
32
Likes
8
Rating
0