EASYtoPRINT | PTFE Wall Mount 5 Tubes
Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.
- Downloads
- 62
- Likes
- 8
- Rating
- 0
83 models
Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.
Wall mount for Pentair Remote
prints in 0,2 use lower for detail 0,3 for more rough as of paint brushing Standard color as you like Drybrush some stones HAVE FUN MORE stones search my modells Terrain or DND ! PLEASE Like Some of my Portals and stone designs ! while…
This is the collection of printable parts and config files for the Easythreed K9 upgrade as seen in the video below. I'm not sure if this is something that I'd recommend, but if you're looking for a challenge, I'm not going to stop you.…
the main k10 spool holder is a little fragile and often brakes with the use of the printer and taking it off the printer is a pain in the bullocks, so i made this spool holder to solve this problem. use the 3mf file if you have a k10 but…
Slider to mount on Y axis to make possible adjust Y inclination and correct frame bending Need a M6 nut and bolt
To be loaded in Prusaslicer under Printer settings / General / Bed shape Openscad source file included.
02/08/2025 - Update Better X mount XY base with optional screw hole Z base and mount Updated config for Z This is a Nema 17 support for EasyThreed K10 and config file to improve quality and speed of printer The config file k10_cfg.txt…
Carriage designed to use Linear bearings for the Easythreed K9. The original carriages on the K9 wear out the plastic bearings so I designed this carriage to take either 2 LM6LUU or 4 LM6UU linear bearings.
The correct values for jerk have been set, voltage is adjusted, the motor is calibrated, Z-axis steps are fine-tuned, an
I didn't like how the bed base was designed. the clearance from the front/rear of the rail was very small and it was bulky and too low in my humble opinion. I wanted to raise it a little so the springs will be tighter and allow more…
A spool holder positioned above the print head for the Easythreed K9 printer for easier feeding to the print head. Its only suitable for the 250g spools. It is attached to the top of the Z axis with double sided Tape.
みんな大好き《げっ歯類》コックピット付きK10追加ガイドキットです。 ※このキットにはげっしーは入っていません。
This is a custom pen holder head designed to replace the standard extruder of the Easythreed K10, transforming it into a cute and functional pen plotter! Whether you're plotting art, drawing text, or just having fun with gcode-controlled…
Easytoprint 0,4 Nozzle and 0,12 layer for more details HAVE FUN use mediterran REVEL color set to get a Knight look
I apologize for my English, as I translated my language through a translator. I decided to install Easythreed k10 on Nema stepper motors and at the same time increase the print area a little. These parts are not ideal, but still with…
This model is a full upgrade of the Easythreed X4 to something similar to a bear frame. For the build layout, you can look into the STEP file (image below), it has the complete assembly inside it! I've built this machine in my youtube…
The K10 has a poor printing quality due to the excessive play on the axis plastic sliders. A lot of the movement is caused due to the top feeding design, that restricts you small filament portions at a time. Changing the feeding direction…
A throw away many parts and design them from scratch. I upgraded printer from old junky steppers to NEMA17s, changed hotend, extruder and Z axis. Now it's printing decent. Instructions can be found here:…
Fastprint at 0,3 good to print detailed at 0,15 HAVE FUN use cura 75max to get supportfree printing as shown in the image
Since I have installed risers to the base of the printer, the provided spool holder could not be used any more. So I desgined one in Fusion 360. The spool holder works fine for max. 500gr spools. Updated (Apr 16th, 2020): Added a version…
So... I did a thing... I was kind of bored with the minor tweaks and upgrades for the K10 I was making and I decided to modify it to be "Core XY" (not really, but bear with me) vs. original bed slinger style. What I did was to model…
Simple filament feed guide positioned above the print head for the Easythreed K9 printer for easier feeding to the print head. It is attached to the top of the Z axis with double sided Tape.
A support brace to help reduce the wobble in the arm on the Easythreed K7 printer, the arm can be screwed, glued and 3M taped to the base.
Prerequisite ***Feel free to search part replacement that is cheaper for your location *** EasyThreed 3D Printer K10: https://www.aliexpress.com/item/1005008788546287.html 12v 3010 LED Fan:…
“Beyond K10 (K-ten)" is a modification kit for EasyThreed K10, a toy 3D printer. This mod increases rigidity and stability of EasyThreed K10 in a very simple way. K-ten means K-point (K点) in Japanese, a reference line to calculate scores…
Z軸ガイドに本体へのボルト固定穴を追加した物です。 本体への穴開けが必須ですが固定はより強固になります。 キャリッジはガイドクリアランスを従来の半分に詰める事でガタを減らしています。 相変わらず「K10では出力出来ない仕様」ですが...。
Conversion kit for EasyThreed K10 to print upside-down like the famous “Positron” portable 3D printer. By adding only two 3d-printed parts, it prints essentially the same “way” Positron does! Oh, and it fits into a filament box, too ;-)…
The intention of this mod was to convert the toy printer into a real printer, as capable as any ender, while maintaining the original aestetic of the printer. Disclaimer: This is not for new users, this is an advance mod that requires…
this should slide snugly onto the top of your z axis support to provide a filament guide for a spool of filament situation behind the printer.
Spool holder for easythreed k7 that allow larger spool to be used (the stock one is so bad...). I've split up the main part so it can be printed on the k7, you will need pliers to snap the two parts. The filament guide is required…
Very easy and Fast No support at 0,3layerheight 15min Just paint some Stones and then Blackwash HAVE FUN +++ PLEASE see the other ## FREE ## stuff in my account here https://www.printables.com/@Magig_I3Prusa/models
The Easythreed X Series Thumb Nut Grip Cap by takashio has been 1 mm to large for my NantFun Mini / Easythreed K7 Category: 3D Printer Parts
For build layout you can look into the STEP file (image below), it has the complete assembly inside it! I've built this machine in my youtube channel, see the video for more information: “Macro” BOM: Aluminum 2020 Vslot profile sizes: 2x…
A ABS profile for easythreed k10 you can use your own temperature tunning but you have the base
This 3D model is a filament holder designed to securely store and dispense filament spools for 3D printing. It features a sturdy base with a central axle, allowing the spool to rotate smoothly as filament is pulled into the printer. The…
Introduction: This modification is a sequential development of the previous version. Let’s be honest — the previous version had several design flaws: mismatched holes and their sizes, as well as general installation inconvenience.…
Colores: Blanco // Rojo // Negro (en ese orden) El cambio de color se realiza depende de la escala que le den al modelo
have fun use skin or sand filament
WTF The THING that making for the Easythreed X1 & OEMs. U can integrate Ugly controller to stock Left side of frame & Improve Z-axis stability. Enjoy. BOM Easythreed_X1_Controller_Holder001.stl = Main parts.…
Inspired by this 15º stem mount, but the EasyTi parts are just built different. Modeled from scratch. For the weight weenies: it weighs about 10 grams with 100% infill. Please note this is designed for the EasyTi (a chitanium brompton…
Have funprints supportless in 0,2 and fast at 0,3 Please see the other stuff i made https://www.printables.com/@Magig_I3Prusa/models
first attempot to modify the printhead for the easythreed k7, works great for tpu this mod uses a cut down e3dv5 heatsink to fit in the printhead. important note: make sure you are using a 12V heater cartridge.
student artwork optimized for FDM prints in 1inch 25mm supportless Have Fun use water coloration and goldshine drybrush
Have Fun printing and painting PLEASE SEE THE other Things Art Students made here in this account
A mini replica of my EasyThreed K7 3D printer (I tried printing it on the same printer, but it didn't turn out very well
A friend asked me to draw a filament holder for his kid who is learning to 3d-print on this little printer from Easythreed. The rol kept falling of the original holder. For 52mm diameter x35mm hole
2 versions: With spool support and only z axis guide! Spool holder for the Easythreed K7, using the model ( https://www.thingiverse.com/thing:4870760 ) as a base. What I did was create a new adapter for this part; the fit is perfect. It…
There I was looking forward to constructing my very own Easythreed K9 Max Ultra Pro Plus. When suddenly I realised I had ordered the wrong shape of motor. The cheapest NEMA14 motors I found on AliExpress were these , ( 6BYG1204-A-6QHT ),…
What you are need: 1. Print 2 parts https://www.thingiverse.com/thing:492... 2. 4020 12V Cooling Fan Aliexpress https:/
Combined Positron-style conversion kit for EasyThreed K10 by @hoge_coc and EasyThreed K10 Alternative Bed @Eladisimo_355
Raiser for the EasyThreeD\Labists X1 to give it some more ground clearance. You can use the original rubbers or another type of dampeners against scratching. They're not overly thight, but just enough to stay in place when lifting the…
I wanted to be able to put the control-box of the Easythreed X1 underneath the printer so I designed a riser. Just print four of these and snap them onto the base of the printer, one at each corner. Installing these risers will prevent…
Tengo ventiladores de pc, y con uno de 80 haciendo pruebas, al final, me he diseñado una pieza para poder montarlo en el eje Z y enganchada en el soporte que trae la impresora en los ejes (donde se pone el soporte del rollo PLA). Es un…
Extra fan support for the Easythreed K7 printer (but also compatible with other versions). There are 2 versions: one with 2 fans, and one with only 1 fan (it can be mirrored to be used on the other side). Use blower fans typically found…
Additional lights holder for plants aquariums intended especially for INVITAL EasyTank PRO LED 58 aquarium set. Probably could be used for other sets with or without some adjustments. lights used with this holder: Sinkor LED II 45 cm WRB…
I will change the category to accsesorys once i know it works :)
A bracket to attach a 30x30x10mm part cooling fan to an EasyThreed Nano hotend. You can use whatever fan you want, but the friction-fit has been tested with this fan. Four “fingers” on the back of the bracket allow rubber band assistance…
Hi guys, I did this project to make a frame for the K1 LCD, the printer is originally with buttons but I managed to buy just the K2's LCD from EasyThreed on AliExpress, just need to say that your K2 LCD was broken, I paid $7 for him. It…
Adaptor for filter of INVITAL EasyTank PRO LED 58 aqua set to protect against suction of shrimps to filter input. Used with common filter suction protector.
This is Easythreed K2 and K1 spool holder for 1kg filament. It is created since every other available spool didn't meet my requirements. It is created so it can hold 1kg filament. Also it prevents tangling and unnesecary bending of…
Вам понадобятся втулки с резьбой 3 мм и винты. На фото видно, куда вставлять резьбовые втулки
Yet another 40x40mm fan holder for Easythreed Nano extruder. Have not tested this to see if it has space to not touch nano's body. Simply attach fan to the back side in picture, and ziptie it to extruder using rectangular holes in sides.…
Fits exactly in the hole in the frame of the printer. Use some lube to make it run smoothly. This part wont help u if your z-axis is bend.
use your standard setting comes out good in all Filament HAVE fun
i just fond a model and i edit on it so i make this result if you want to try it
Eine Halterung für ein Raspberry Pi Kameramodul am Easythreed K1. an der rechten Z-Achse ist ein Plastikstück, welches durch das Modell ausgetauscht wird. Das Kameramodul ist in dieser Variante mit Patafix an dem Halter geklebt.
Here is the original text from the thingiverse page: Semplice sistema di ventilazione per ventola 5015 installabile su Easythreed / Labists X1. Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
VERY NICE GOOD KEYDCHAN!!!!!!!!!!!!!!!!!!!!!!!!!
Easythreed K7 - Z-Axis Support Mod This fixes the "flying arm" sag that causes mechanical backlash and deformed circles. A right-side support keeps the X-axis level. Hardware: 1x Linear Rod (6mmx300mm) 2x LM6UU Bearings Silicone glue…
Печать поддержек " Зигзаг " лучше всего Толщина стенок 1,5 мм Кулер подключается в систему охлаждения двигателя экструдира
Hi guys, I did this project to make a frame for the K1 LCD, the printer is originally with buttons but I managed to buy just the K2's LCD from EasyThreed on AliExpress, just need to say that your K2 LCD was broken, I paid $7 for him. It…
Z軸ガイドに本体へのボルト固定穴を追加した物です。 本体への穴開けが必須ですが固定はより強固になります。 キャリッジはガイドクリアランスを従来の半分に詰める事でガタを減らしています。 相変わらず「K10では出力出来ない仕様」ですが...。
first attempot to modify the printhead for the easythreed k7, works great for tpu this mod uses a cut down e3dv5 heatsink to fit in the printhead. important note: make sure you are using a 12V heater cartridge.
A ABS profile for easythreed k10 you can use your own temperature tunning but you have the base
Tengo ventiladores de pc, y con uno de 80 haciendo pruebas, al final, me he diseñado una pieza para poder montarlo en el eje Z y enganchada en el soporte que trae la impresora en los ejes (donde se pone el soporte del rollo PLA). Es un…
So... I did a thing... I was kind of bored with the minor tweaks and upgrades for the K10 I was making and I decided to modify it to be "Core XY" (not really, but bear with me) vs. original bed slinger style. What I did was to model…
Prerequisite ***Feel free to search part replacement that is cheaper for your location *** EasyThreed 3D Printer K10: https://www.aliexpress.com/item/1005008788546287.html 12v 3010 LED Fan:…
This is Easythreed K2 and K1 spool holder for 1kg filament. It is created since every other available spool didn't meet my requirements. It is created so it can hold 1kg filament. Also it prevents tangling and unnesecary bending of…
Have Fun printing and painting PLEASE SEE THE other Things Art Students made here in this account
The K10 has a poor printing quality due to the excessive play on the axis plastic sliders. A lot of the movement is caused due to the top feeding design, that restricts you small filament portions at a time. Changing the feeding direction…
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…