Search results: ebot

Sort order

466 models

P
PrintablesMIJ90175

Bracket for hidden Apple Airtag on Segway Ninebot Kickscooter MAX G30D II

I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…

Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant

Downloads
204
Likes
25
Rating
5
P
Printableserdnatter

GEPRC Cinebot 30 Gopro and TBS M8.2 GPS mount

GEPRC Cinebot 30 GoPro mount with integrated mount for TBS M8.2 GPS module Remixed “Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)” form Lenny B FPV The picture shows the part printed with Prusament PETG, 0.15mm, 100%…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
88
Likes
1
Rating
0
P
PrintablesClamikra

Segway Ninebot Max G2 Adapter for Abus Sportflex 2504 or a bottle standard holder

I needed a light and quick to apply lock for my new Ninebot Max G2 eScooter. The Abus Sportflex 2504 was my choice. It’s small, light weight with a 90cm retractable cable quite long, keyless with a 4 digit code lock and mounts into the…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
14
Rating
0
P
Printablescomputer22

🔑 Ninebot MAX G30D eScooter Chain Holder/Kettenhalter/Schlosshalter (3cm chain-Ø)

Please leave a ♥ Like if this print was helpful to you :-) This is a "clamp-on" design chain holder for the Ninebot G30D escooter and a max chain width of 3 cm. Holds the lock securely in place when not needed and also makes locking it on…

Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
13
Rating
5
P
Printablesr00f

ABUS Granit XPlus 540 lock holder for Ninebot Max G30

Hello everyone, This is a simple model of neck-mounted ABUS Granit 540 U-lock holder for Ninebot Max G30 e-scooter. Hardware required: 6x M5x12 mm bolts 6x M5 nuts Double up to eliminate lock rattle/movement (see photos). Recommended…

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
9
Rating
0
P
PrintablesKizzard

Ecovacs Deebot Brush Roll Shaft Adapter

Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
10
Rating
0
P
Printablesdragonfly

EASY 13 - 10 commandments moses/ Dekalog, 10 Gebote Tafeln Mose

I printet EASY 13 with 200%. This commandments can now be held by Easy 13.

Print approx. €4.59–€5.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
5
Rating
0
P
PrintablesHagelstone

Deebot X1 Omni scented oil holder

In order to distribute a pleasant scent in the apartment during cleaning, a cotton pad soaked with scented oil can be attached to the air outlet opening of the Deebot X1 with this holder.

Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
4
Rating
0
P
PrintablesJorreto

Soporte AiLens para Cutebot pro

Es un soporte para la cámara Ai Lens de Elecfreaks. Se sujeta sobre el sensor de ultrasonidos del cutebot pro. Se le han añadido un par de orificios para tornillos, pero no es necesario, se sujeta bien. De esta forma se puede llevar el…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
2
Rating
0
P
PrintablesOstseefoto

Gebotsschild

Ich habe einfach nach einem Schild gesucht, was ich auf meine Box in der Werkstatt verwenden konnte. Aufkleber hielten auf dem Holz nicht lange, Blechschilder waren mir zu groß, also habe ich es selbst erstellt. Ein bisschen Photoshop und…

Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
PrintablesLenny B FPV

Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)

Print & replace orignal Print in PETG or PC Weight in PC is 5.3g tested and works fine Please leave a like if you downloaded it :-)

Downloads
1,287
Likes
68
Rating
5
P
PrintablesTomKnox

Wheeliebot - w/ Code

Wheeliebot - w/ Code Small selfbalancing bot. RC-controlled can jump This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code…

Downloads
1,051
Likes
735
Rating
0
P
PrintablesJason

Ninebot MAX G2/F2 ST-Link clip

only dupont connectors needed remove the plastic and bend the pins accordingly(2mm between pins at the end) the pins should stick out about 1~1.5mm out from the surface if you can't make this just buy this…

Downloads
763
Likes
21
Rating
4.5
P
PrintablesAJAJ1992

JREV NINEBOT G30 Speedfork FULL

An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact

Downloads
748
Likes
15
Rating
0
P
PrintablesChris

Gashebel Ninebot G30/G30LD

Gashebel für E-Scooter Ninebot

Downloads
704
Likes
67
Rating
5
P
PrintablesFlaszynski

GEPRC Cinebot30 GPS mount

Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.

Downloads
629
Likes
29
Rating
4.5
P
PrintablesAJAJ1992
Downloads
621
Likes
19
Rating
0
P
PrintablesBorderbox

Ninebot ES2 Wall Mount

Wall mount for Ninebot ES2 Scooter. Can be attached with strong double-sided tape or screw into wall. I would recommend resting the scooter front wheel on the ground and use the mount to brace the scooter to the wall. **** I would not…

Downloads
561
Likes
110
Rating
4.6
P
PrintablesStan

U-Lock Holder for Ninebot G30LD e-scooter

Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…

Downloads
509
Likes
62
Rating
4.75
P
PrintablesKimframes

Can holder + hook for Segway Ninebot MAX G30 D

Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.

Downloads
508
Likes
79
Rating
5
P
Printablesrtkpf

BeeBot Pen Holder

Accessories for Beebot robot. Make your BeeBot/BlueBot draw

Downloads
478
Likes
22
Rating
0
P
Printablesduckie13duck

ninebot scooter full twist throttle

full twist throttle for your ninebot scooter

Downloads
445
Likes
9
Rating
5
P
PrintablesBrettcnc

Rubber Boot for Scooter Stand. Segway Ninebot Max 30. TPU Foot Kickstand Cover

A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…

Downloads
438
Likes
66
Rating
4.6
P
PrintablesMonty

Toy Tombstone (BattleBots)

My kids are huge fans of BattleBots and inspired me to create a set of toys that they can be a bit rough with without fear of breaking the more expensive Hexbug toys. All “pins” are sections of 1.75 standard filament snipped to length.…

Downloads
418
Likes
45
Rating
4.67
P
PrintablesLaiken Murray

segway ninebot e scooter twist throttle

infill:30-100 supports: yes brim: optional walls: 2-4

Downloads
403
Likes
19
Rating
2
P

GlueBot Cup

This Gluebot cup is a holder and carrier for the 16oz Gluebot and several glue brushes. It is designed so as things are very unlikely to come out while carrying. As shown in the video

Downloads
387
Likes
102
Rating
5
P
PrintablesAJAJ1992
Downloads
372
Likes
17
Rating
0
P
PrintablesAJAJ1992
Downloads
364
Likes
15
Rating
0
P
PrintablesJakub Štaubr

Astrobot Gloopy alias Slimebot

I made this for my son after the first Astrobot game. After the success of the new game I thought someones kids might al

Downloads
351
Likes
30
Rating
5
P
PrintablesStefan

E-Scooter Bag Hook with AirTag Compartment - Fits Segway Ninebot

I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…

Downloads
350
Likes
57
Rating
4.33
P
PrintablesCEPP

Simple Ninebot G30/G2 Charging Port

This is a simple, fully 3D-printable charging port for the Ninebot G30/G2, designed with flexibility in mind. You can choose between versions that accommodate an XT60 connector with or without a button, depending on the file you select.…

Downloads
327
Likes
18
Rating
0
P
PrintablesMarcalot

Cinebot30 M8.2 & M10 GPS and Antenna holder

I used Sainsmart TPU with some supports in the right places (paint on supports) - easily removable. The second model uploaded is for the M10 GPU and I've updated the model for easy antenna Install / removal. I made a cut at the back of…

Downloads
324
Likes
7
Rating
0

Ninebot G30 Spacer 10mm 7mm sidewalls

Ninebot G30 Spacer is used to install a bigger battery in the battery compartment. This is my version with 7mm walls. If needed you can grind down the top siderails where the spacer is mounted for even more space. Perfect for…

Downloads
302
Likes
9
Rating
0
P
PrintablesMa Smi

Taschenhalter für E-Scooter Segway Ninebot Max G30D II / Bag holder for E- Scooter Segway Ninebot Max G30D II

Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…

Downloads
298
Likes
40
Rating
0
P
PrintablesAJAJ1992

JREV NINEBOT G30 Rear Axle Bracket FULL

Rear Axle Bracket as reinforcement and for 125mm axle drop out motor brake disc mount adapter

Downloads
293
Likes
9
Rating
0
P
Printablesmt_benno

Eyebot from Fallout 4

This model was ripped straight from the Fallout 4 game files. I've included two versions. One is subdivided and one is the original file.

Downloads
277
Likes
57
Rating
0

150g Antweight/ Fairyweight 4WD battlebot combat robot

I did compete with this robot in four full combat competitions so far. Attesa performed (imo) really well and was able to use the shield and the spikes effectively. The speed, combined with the grippy tires, makes driving a lot of fun.…

Downloads
276
Likes
55
Rating
5
P
PrintablesBadLuck

GEPRC - Cinebot 30 / GEP-CT30 Propeller Guard

Disclaimer: These could be used as a permanent solution, however because there's nothing stopping the duct from clamping onto the prop you will almost certainly be blowing props whenever you bump things. As pictured it was printed in…

Downloads
274
Likes
15
Rating
0
P
Printablestrevor229

Ninebot Max "Quarter" Twist Throttle Mod

DO NOT REPOST ANY PART OF THIS MODEL WITHOUT PROPER ATTRIBUTION! FOLLOW THE CREATIVE COMMONS ATTRIBUTION NON-COMMERCIAL SHARE-ALIKE LICENSE TERMS! USE THE REMIX BUTTON! This was more of an experiment to see if I could create such a thing,…

Downloads
274
Likes
19
Rating
0

ONI - 150g Antweight/ Fairyweight shuffler hammer saw combat robot battlebot +.step

This was a fight against a flipper with titanium top armour. ONI can both, do damage and control his opponents quite well. Weight: ca. 223g Size: fits 150x150 square I printed the chassis and side armour in 95A TPU. The top plates, glider…

Downloads
267
Likes
44
Rating
5
P
PrintablesStefan

Airtag and Bag Hook - Fits Segway Ninebot Max G30LP

This a new design but I drew inspiration from Ninebot G30 AirTag Hook by mhaehnel | Download free STL model | Printables.com . The screws line up a little better and I have included the step and fusion files in case you want to modify or…

Downloads
266
Likes
25
Rating
4
P
PrintablesMarcalot

Cinebot 30 Flywoo GM10 mini v3 GPS / DJI 03 Antenna holder

Original Antenna mount by "lukaskroll" on Thingiverse. I have modified one of his models to accommodate the GM10 Mini v3 GPS.

Downloads
263
Likes
4
Rating
0
P
PrintablesVacek238

Xiaomi/Ninebot scooter phone holder

The parts "Clip", "main-short" and "crew" are from the original model of the author PlasticBarista I designed a new "jaw" part because I had already broken the original model several times. It has two holes for 6mm aluminum rods. Hardware…

Downloads
255
Likes
35
Rating
5
P
PrintablesFluffyKoala

Ninebot Max G30 Handlebar Extenders

These models extend the handlebars of a G30P 25mm for better control. For use with stock grips. This update vastly improves rideability of the scooter. Snug fit, will require a rubber mallet and finesse. I suggest printing more than two.…

Downloads
251
Likes
13
Rating
5
P
Printablesdjos_1475

Ecovacs Deebot Auto-Empty Station - Duct Plug

I love our Ecovacs Deebot N8 Pro with Auto-Empty Station as it's great for cleaning up our dog's hair that they are constantly shedding. However, I noticed that frequently the debris it picked up would not be removed from the bin by the…

Downloads
251
Likes
19
Rating
5
P
Printablesjonashedlof

Segway ninebot G2/G30 holder + items

Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…

Downloads
243
Likes
32
Rating
4.67
P
PrintablesDingo_aus

Turtlebot3 Double Waffle Plate

This is two turtlebot3 (Burger and Waffle) waffle plates able to be printed together. The 3mf file is included because it can be difficult to print well. Support enforcers are used. Printed in PLA .3mm layers.

Downloads
242
Likes
8
Rating
5
P
PrintablesSusManufactory

"Butterbot/Purposebot" - 3D Printable Posing Toy

Introducing ButterBot/PurposeBot: Your Existential Desk Toy with a Secret Twist Ready to explore life’s big questions with your very own ButterBot? This fully articulated, 3D printable robot offers endless creative possibilities, all…

Downloads
234
Likes
72
Rating
4.5
P
PrintablesAJ

Hexbug Battlebot Minotaur Upgraded Weapon

Didn't like the drum that came on my hexbug minotaur rc toy so I drew up and printed a new, more effective drum. Larger diameter, more bite, three teeth, and most importantly this one is actually balanced. Took a few variations to get it…

Downloads
234
Likes
27
Rating
0
P
PrintablesMisterK

Gear and Arm for Ecovacs Deebot OZMO T8+

While I was trying to pull off the brushes on my Ecovacs Deebot OZMO T8+ I accidentally broke the green gear+arm that the brushes snap onto. I was bummed out until I remembered I could design and print a replacement part to fix it! I took…

Downloads
232
Likes
24
Rating
5
P
Printablesedcdadstuff

Battlebot Sumo Robot using Raspberry Pi Pico and WuKong 2040 breakout board

Pi Pico Sumo/Battlebot using a Wukong RP2040 breakout board. This is a working progress, so for now, here are the print files for the chassis and the 8T (16T including both sides) and some basic control over WIFI. Using a web browser, the…

Downloads
231
Likes
52
Rating
0
P
PrintablesBastian Preß

Ninebot g30d2 Hand throttle

From thumb throttle to hand throttle

Downloads
230
Likes
9
Rating
0
P
PrintablesPawel G.
Downloads
229
Likes
16
Rating
0
P
PrintablesTheBlackfish

Beater Bar Battlebot - Antweight (150 g)

This is a remix of the Bar PLAntweight 150g by Sas_nz which is based on the CRNZ Ant Weight Combat Robot Kit . Modifications I made: Modified mounts for the N20 / N10 gearmotors, so no need for the CRNZ faceplate mounts Removed some walls…

Downloads
224
Likes
36
Rating
0
P
PrintablesSimas

Ninebot by Segway Kickscooter hook hanger

For Ninebot Es1 Es2 Es3 Es4 kickscooters.

Downloads
224
Likes
18
Rating
0
P
PrintablesJoni_cz

Carry handle for Segway NINEBOT MAX G3

I modeled this handle to carry this scooter more easily by one hand, if mounted as in photo, its quite balanced. If you want, you can print one piece of “Handle clamp hole” so you can carry your allen key here as in photo. I've been using…

Downloads
219
Likes
36
Rating
5
P
PrintablesTodd Stansell

Ninebot Cup Holder (MMU)

I created a clip for a Ninebot G30P electric scooter to attach a cup holder. I used one of the Rivian Cup Holder cups and added a custom flower. The flower petals and center are each separate bodies so they can be colored independently…

Downloads
218
Likes
14
Rating
0
P
PrintablesAJAJ1992

JREV NINEBOT G30 Handlebar Bracket FULL

Handlebar Bracket for 31.8mm handlebars

Downloads
214
Likes
9
Rating
0
P
PrintablesUser87

Segway Ninebot ZT3 Pro holder + items upgrade

Remix of the original to fit ZT3 Pro, as the shaft is round with diameter of 42,5mm. All other parts can be used from the original.

Downloads
213
Likes
12
Rating
5
P
PrintablesAJAJ1992

AJED Rear Axle Brake Bracket for Ninebot MAX G30

AJED Rear Axle Brake Bracket for Ninebot MAX G30 This bracket is to mount a rear brake system + increasing the maximum torque transmission (It acts like a huge torque washer) Please use maximum 2mm washers on the inside, otherwise a 125mm…

Downloads
213
Likes
7
Rating
0
P
PrintablesCEPP

Ninebot-G30 20s6p Cellholder

Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…

Downloads
212
Likes
11
Rating
0
P
PrintablesDingo_aus

A1 Lidar mount for Turtlebot3 Waffle plate

This design allows you to hold an A1 Lidar from RPLidar to the Turtlebot3 waffle plate. The waffle plate is a module robot base platform used in the open source Turtlebot3. The attached 3mf file includes my selection of variable layer…

Downloads
199
Likes
7
Rating
0
P
PrintablesTheBlackfish

Vertical Spinner Battlebot - Antweight (150 g)

This is a remix of the 150g vert by Muffin578 . Modifications I made: Moved the motor mount to make more space for a more common BE1806 motor Modified the motor mount for the BE1806 screws Added holes to the body to mount a power switch…

Downloads
194
Likes
24
Rating
0
P
PrintablesCEPP

Ninebot G30 Stealth Spacer – Waterproof and Precision-Fit

Ninebot G30 Stealth Spacer Here we offer a few free spacers which can be 3D printed by everyone. Please note the license agreements before downloading or using these files. These spacers are NOT compatible with our aluminum floor system.…

Downloads
189
Likes
9
Rating
3
P
PrintablesRekcik

Ninebot Segway folder safety

Safety for the Ninebot folder mechanism. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: I used archimedean chords infill to have more flexibility.

Downloads
188
Likes
33
Rating
5
P
PrintablesPreciousRoy

Rear Fender upgrade for the Monorim MXR1 Segway Ninebot Max G30

i made my own rear fender for the Monorim rear suspension, the one they supply is a 2 part fender that is just horrible in my opinion. I broke min within 1 week, so i designs my own. when you print is you need to slice it in half and if…

Downloads
183
Likes
19
Rating
0
P
PrintablesMacNite

CoreBot V2 Large format CoreXY 3D printer

Here I present you the new version of my large format CoreXY 3D printer known as CoreBot. The main goal was to make the built mord affordable, easier and cheaper to built.For this reason the linear rails were replaced by rollers in an…

Downloads
180
Likes
57
Rating
0
P
PrintablesPrinty

Segway Ninebot ZT3 Pro case holder

Case used: https://de.aliexpress.com/item/1005009165100557.html?spm=a2g0o.order_list.order_list_main.40.30d95c5fX0qWQt&gatewayAdapt=glo2deu

Downloads
177
Likes
13
Rating
5
P
PrintablesJosef C.

Rubber Kickstand-shoe and elevator for Escooter Segway Ninebot F3 / F3Pro / MaxG3

Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…

Downloads
174
Likes
20
Rating
5
P
PrintablesMonty

Toy Huge (BattleBots)

I made this toy to go with my kids Hexbug BattleBot toys. The wheels don't spin as well as I'd like, but I didn't want to include any non-printable parts so I didn't design in any bearings. I recommend printing the inner rod lying down on…

Downloads
165
Likes
30
Rating
5
P
PrintablesTacky G30

Ninebot Max G30 Fender

Print with at least 40% cubic infill Fits in and replaces the original fender

Downloads
159
Likes
7
Rating
0
P
PrintablesMacNite

CoreBot - CoreXY 3D printer with linear rails

I wanted to built a really reliable printer which is reade for the E3D tool changing mechanism, when it is finally realeased. At first I planned to built a Hypercube / Hypercube Evolution but soon found I that the design was not stiff…

Downloads
154
Likes
19
Rating
0
P
PrintablesCederb

Hook/Clip for Ninebot ES Series

The plastic hook on my Ninebot ES4 had cracked and broken off a few times too many, so I designed and printed a replacement. You will need two socket head screws M4x16mm. My personal hook is printed in 17-4PH Stainless Steel on a…

Downloads
151
Likes
18
Rating
5
P

Deebot Ozmo 950 mop spacer

Print with 0 bottom layers 0 top layers honeycomb infill 4 perimeters

Downloads
150
Likes
22
Rating
5

ninebot kickscooter max g2 rear fender VERS #2

Moving the taillight. a closed mud wing.

Downloads
148
Likes
9
Rating
0
P
PrintablesStonXX

EggBot, EggDuino, SphereBot Remix

Remix der phantastischen Ostereierdekorations-Maschine von Herbert_b1. Hier findet Ihr nur die geänderten Teile, alles andere beim Original !! https://www.thingiverse.com/thing:3431363 Geändert wurde die Montageplatte vom Stiftantrieb,…

Downloads
146
Likes
36
Rating
4.67
P
Printablesrobofusion

GEPRC Cinebot30 OPTICAL FLOW & LIDAR SENSOR MTF-01 holder

In FPV (First Person View) drone flying, the application of positioning technology has become increasingly important. Positioning technology not only reduces the likelihood of losing the drone but also provides a stable flying experience…

Downloads
145
Likes
6
Rating
0
P
PrintablesAJAJ1992
Downloads
144
Likes
11
Rating
0
P
PrintablesKimframes

Airtag holder for Segway Ninebot E2 Plus

Mounted with M3x5 screws + nuts

Downloads
140
Likes
12
Rating
5
P
Printablesvain1222

Ninebot SNSC Battery Compartment Emergency Release Key

DISCLAIMER: I DO NOT ENCORUAGE STEALING OR (AND) THE USE OF THIS MODEL IN ILLEGAL WAYS, IT IS CREATED FOR RIGHTFULL OWNERS OF NINEBOT SNSC SCOOTERS THAT HAVE BEEN OFFICIALLY BOUGHT. Ninebot SNSC battery latch release key, features 2…

Downloads
139
Likes
3
Rating
0
P
PrintablesPaerGaben

Indicator / blinker button for Segway NineBot G2MAX e-bikes

The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…

Downloads
138
Likes
9
Rating
5
P
PrintablesPatrik
Downloads
138
Likes
18
Rating
4
P
PrintablesSharki4

Ninebot Max G30

ninebot_max Category: Other

Downloads
136
Likes
9
Rating
5
P
PrintablesFLWE

HUGE BattleBot

A miniature version made in the likeness of HUGE from BattleBots . Wheels and weapon can spin freely. Printing Need to have a pretty well tuned printer as the tolerances are tight. Print with the wheel facing down. Only have support that…

Downloads
136
Likes
23
Rating
4
P
PrintablesNordfpv

GEPRC Cinebot30 GPS mount

This is a GPS holder for the GEPRC cinebot30. The mount fits 22x22mm GPS. The GEPRC M8 and M10 have this size, and I know some other popular brands have the same size. v2 is the original model from Riley Gibson…

Downloads
135
Likes
4
Rating
0
P
PrintablesSharki4

Segway Ninebot G3 Max Gland

small video preview gland TC 16х30х4,5 example: https://ozon.by/product/manzheta-armirovannaya-salnik-tc-16h30h4-5-1281241717/?__rr=1 https://youtube.com/shorts/HhOks5Je0Po Category: 3D Printing

Downloads
134
Likes
9
Rating
0
P
PrintablesAJAJ1992

JREV NINEBOT G2 SCAN DATA

Archive of all Ninebot G2 Scans

Downloads
134
Likes
6
Rating
0
P

Mini Gluebot Cup

A storage system for the Mini Glubot and application brushes. It holds everything securely in one convenient and easy to carry holder.

Downloads
132
Likes
39
Rating
0
P
PrintablesAJAJ1992

JREV NINEBOT G30 Numberplate Holder FULL (Download ZIP File!)

Numberplate holder, needed in certain countries together with JREV Rear Fender

Downloads
130
Likes
8
Rating
0
P
PrintablesAJAJ1992

JREV NINEBOT G30 SCAN DATA

Complete collection of G30 scans

Downloads
126
Likes
6
Rating
0
P
PrintablesP&B

Segway Ninebot Max G3

nichts besonderes, nur ein seitlicher Kennzeichenhalter für den Max G3 für die linke Seite

Downloads
124
Likes
5
Rating
5
P
PrintablesCEPP

CEPP Ninebot G2 Spacer 10/20/30mm

I am using Orca slicer! to split the model press->right klick->Split->to objects for custom cable outputs write me a dm on Telgram @Florian2OO7 join our Telegram: https://t.me/ceppchat

Downloads
123
Likes
2
Rating
0
P
PrintablesGonzoMagx

Ninebot MAX G2 parking brake

A clip with which you can lock the brake during transport by public transport or in the car. Through the hole you can thread a cord to attach it to the scooter. I have printed in PetG with 4 walls and in the orientation as in the last…

Downloads
122
Likes
15
Rating
4.67
P
PrintablesHonza Dohnal

Ecovacs Deebot U2 brush roll shaft adapter

I don't fully understand the vacuum cleaner design because this part is so easy to lose and cleaner is not working without it making whole vacuum cleaner useless. Fits Ecovacs Deebot U2 in case your get lost just like mine :)

Downloads
117
Likes
5
Rating
5
P
PrintablesMatthias

Ninebot max G2 handle protection

I have not printed it yet so please share your thoughts or experiences.

Downloads
116
Likes
11
Rating
0
P
PrintablesAJAJ1992

JREV NINEBOT G30 Floor Extension 12mm FULL

JREV Floor Extension for 16S6P configs

Downloads
116
Likes
9
Rating
0

(battlebots) orbitron

orbitron battlebot

Downloads
113
Likes
17
Rating
4
P
PrintablesstlDenise

VibroBots (3D printed BristleBots)

We brought our 3D printed “bristlebots” to MRRF 2023 and wanted to share the files so others can make them. This is made on TinkerCad so kids can have fun designing their own feet and cases! There's a baseplate for holding batteries,…

Downloads
112
Likes
14
Rating
0
P
PrintablesMacNite

CoreBot V2 MGN12H + Hemera + SuperVolcano Conversion

This is a modification I came up with for my CoreBot V2 printer to convert the linear motion system from Rollers to MGN12H linear rails. I also added a (somewhat) quick-change system for the tool head as well as support for the E3D Hemera…

Downloads
111
Likes
14
Rating
0
P
PrintablesZiemniaczenka

Ninebot Max G30E II rear fender support

Fits original as well as aftermarket fender (I have bought mine locally on Allegro ) Printing Supports required for axle mounts Print on the flat side Use a lot of perimeters

Downloads
109
Likes
7
Rating
0