👽 Total Recall Activator Bed Scraper
I had a dream I was a spy and I used this to save the world. There were mutants and alien machines and this lady with 3
- Downloads
- 131
- Likes
- 42
- Rating
- 5
193 models
I had a dream I was a spy and I used this to save the world. There were mutants and alien machines and this lady with 3
I had a dream I was a spy and I used this to save the world. There were mutants and alien machines and this lady with 3
VITALPET A dog recall and training collar that uses an Arduino Nano and 3D printing. Caution: Amateur-level soldering and electronics skills are required. There is a significant risk of burns if you don't know how to use a soldering iron.…
UPDATE17.01.2022 Found another Template including front, back and top. Its only a PDF so its not simply ready to print or cut out, but I thought I add it as it could be useful to some of you. !!WARNING!! if you plan to do this with a…
I recommend to use adhesive tape for letters positions fix.
Hi Folks, You want to save birds with 3D printing? And have something that's cooler designed than regular decals? Here you are! We have been using these for several weeks on our quite big windows. Before, we had birds crashing into the…
better to use PETG with 4 perimeters in vertical. No support needed. Works fine :) Category: Kitchen & Dining
Includes small colony of Tubipora musica attached to coral
Organizer for holding two bottles of Micro Sol and Micro Set. Also hold two Tamiya type square bottles. Holds two Tamiya tweezers, two scalpel handles, two brushes and Tamiya decal scissors or equivalent.
Recommendation: For position fix use adhesive tape.
Use this decal for broom! Print Settings Printer: Voxelab Aquila Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category: Art
Flat (0.4mm) decal-like version of the Giant Lego Skeleton face resized to have the correct dimensions when wrapped around skeleton's head (print in PLA and use hair drier). I have attached mine with thin double sided tape. Print Settings…
FFM! VESC your onewheel now and then print this beautiful decal as a badge of victory over Kyle Doinkson.
I created this organizer for the stuff I use when applying water-slide decals.
Car/truck decal of the Texas star. Flat on one side for easy adhesion
Instead of using paper decals, I used plastic decals. The concorde model was done by CLERX. Please refer to https://www.printables.com/fr/model/341875-concorde-1144 for more details.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a printable template for drawing the decal seen on Scout Trooper helmets. Prints in under 10 minutes.
Printed in ASA for Uv resistance. Textured PEI on printed face for effect. I acetone welded the template together but tape will work too. Recess in back of letters for double sided foam tape(3m i think). If you scale it bigger you will…
Decals - water based application set. Easy way to wet and apply decals for models. Designed my own version as I wasn't happy with store brought options. This comes in two parts .the BOTTOM is were you put a small amount of water and the…
Hey porter! Wanna mark some stuff with our logo? Hear you go!
Best Viper model out there. I just added some plugs to make the engines and wings easier to assemble and sturdier. The main fuselage was clipped to fit on a Flashforge Adventure 5. I also played with the Viper base from:…
0.15 layer for better finish limited supports for curved phone case wall
I have always loved the look of the Valkyrie, and Davids model is fantastic. I took my purchased CGTrader greeble sla's and did a re-skin (not studio accurate) of the model and increased the scale for my Anycubic Mono. I made 2 versions,…
Add Halloween charm to your windows with this 6"x6" cat silhouette. The arched-back design creates a fun, spooky-cute effect when light shines through, making it a perfect seasonal decoration for October. There is an option to have a…
A bee decal intended to be used with Bemko's beautiful honeycomb lamp shade . The peg has a 10° taper to be roughly 7mm at the widest and 6mm at the narrow end, so it should fit most of your printed lamps. You can also scale it up or down…
Remember the following text: Inspiration from https://wallstickers4you.com/products/vinyl-wall-decal-forest-animal-bear-silhouette-landscape-mountains-stickers-2817ig?utm_source=pinterest&utm_medium=social I'm not the original creator of…
Holder and storage for Micro Set/Sol and other water slide decal accessories and tools. The bottles fit snugly in the holder so it should help avoid accidental spills. I keep dedicated decal brushes in the circle holes on the left and…
I did PLA decals for the Double-decks London bus made by Winslow instead of using paper decals.
Signboard, medallion, brewery logo to mount on Lindr beer pourer. Filling any such as plywood or sticker. Has a threaded nut hole for attachment.
Simple gridfinity organizer holder for decal, vinyl or tint squeegee type applicators.
⚔ Model Name: Bladecaller – Sentinel of the Ember Vale ⚔ Grace meets grit in the Bladecaller, a fierce female sword fighter sculpted with precision and poise. Her stance is battle-ready, her blade mid-swing, and her gaze locked with…
A holder for Mr. Hobby 40 ml round bottles that Mr. Mark Setter and Mr. Mark Softer decal solutions come in. Needs 2 universal Skadis hooks (I used the model linked below). Print with base on build plate no supports needed. Correct Hooks:…
I recommend printing with a layer height between 0.16 and 0.08 for better results. The finer the layer height, the better the print quality. Changing the print mode from 'Classic' to 'Arachne' will yield better results.
For applying transfer tape onto cut-vinyl decals, and then for applying those decals onto surfaces. Make sure your print seams don't end up on either of the long edges of the squeegee. Recommended Slicer Settings: Nozzle Size: 0.4mm Layer…
Designed in fusion 360. Dimensions are provided in the photos for both files. There is a heavy duty 15mm thick version and a lighter duty 10mm version. Works with fishing line or any line that is 3mm thick or smaller. Use a sawing motion…
PS4 Lightbar Decal(s) Note #1: My Print settings are not perfect, so you will see some defects in my pictures, please don't let that discourage you from choosing my model! Note #2: THIS DOESN'T WORK ON PS5 CONTROLLER! What You Need: Sand…
I recently picked up a plastic model kit for the first time in 20 years, so I wanted to organise all my tools needed to put it together (except anything related to painting it, as I've already got setups for that). I found the original…
This allows you to push the grease through the tool, so you don't have to try and get that damn syringe crammed in there and then knock the plug out.
V1 Hoonicorn with some decals. Do not scale down or you won't be able to tell there are words, scale up for better visibility of the words as well. This is as big as my printer will allow me. **Make sure to adjust your thickness. It…
PET-G Layer Height 0,2 Wall Line Count 4
Description: Give your friends and family a fright they’ll never forget! These realistic spider decals are perfect for sticking near light switches, door handles, or any unsuspecting corner. Designed to look like real creepy crawlies,…
Isolated the four individual traces for each of the four sides plus a center to slot them into. This makes it possible to print much larger (220% size on the Prusa Mini). I also added a center with a fake processor. Numbering is…
I designed Dodecaloop as a unique dodecahedron made entirely from a single continuous line. Here are my Cura settings (I'm using the Ender-3 V3 SE): Layer Height: 0.16mm Infill: 100% Support: Tree (Touching Buildplate) Print Speed:…
I know this isnt the full set of decals, but its a start. I will be adding more as time goes by. For now its the main body decals and the tail feathers. It is set in dxf format so it is importable into your favorite vinyl cutter software.…
0.2 mm layer height recommended PLA 3 color changes, total of 4 colors recommended No MMU needed
This model was inspired by classic Toyota Tri-Color racing grille accessories. It is designed to be printed as an adhesive decal, a keychain, or a grille accessory. There are models for both single and multi-color printers in respective…
For all of us that work for Honda, this does help. If you have a friend that works for Honda make him or her one, they will love you. It uses a 7mm x 2mm magnet super glued in middle to hold to EPS plug. Much easier than what the Honda…
Its a nut for the brakecaliper of many Volkswagen cars. Fits Seat Ibiza 6J 86PS 1.4L
Tesla Model 3s made from 2017-2020 have an issue with the cables running from the main body to the trunk lid. They used solid-core wire which likes to break when its bent/folded repeatedly. Tesla is currently not offering to replace the…
Simples, print it and build it. Decals included. Either print on clear vinyl or for best results, print on decal paper.
Butterfly's!!!!! Savage and ravenous beasts of doom and destruction!!! Watch out! You might print yourself up a flotilla of these seemingly innocent little buggers, then bam! They invade your personal space and setup fortress in your…
Belt Buckle Filament Change (0.2 Layer): Start: Black Layer 3: Gold Decal Filament Change: Start: Black Layer 6: White
Just a simple elsecaller coaster You can print only the coaster and paint the grooves (I dilute some acrylic paint in water and add put it in the groove with a syringe) You can also fill the grooves with epoxy or UV resin(In my experience…
While planning the build for this masterpiece, I was unhappy with the inconsistency of the engraved vs embossed options. While it's obvious why, Some parts need to be printed “face” down so the embossed was not an option. I was not a fan…
Multicolor is achieved by changing filament at specific height (see settings of your preferred slicer, or google "Pause at Height”). Attribution for vector graphics used as basis: (free license at time of download - may have changed…
This 3D-printed pumpkin window decal adds festive Halloween charm to any window. At just 1 mm thick, it lets light shine through to reveal a glowing pumpkin silhouette, creating a cozy seasonal effect day or night. Instructions: Apply…
I'm not the original creator of this look, but I am the one who converted it to be 3D printed! Enjoy! Category: 2D Art
A physical prop to substitute for the HeroQuest Wand of Recall special magical item. (Feel free to leave a tip if you think it is merited :) Category: Games
The original was just slightly too big to fit in a standard credit card pocket in a wallet, so I changed the dimensions to fit. Still the same thickness as the original. Now, 3.37in x 2.125in (85.6mm x 53.98mm) Recommended Slicer…
if you don't want to take the time to paint out a logo just print out one of these decal cards for a professional and straight edged look . comes in empire, rebel, jedi, mandalorian, hyrule crest, and pokeball.
A Grimdark skull decal I modelled for your Grimdark/PleasentBright 3d prints. high poly count be around "87.65mb" warned
Jeep Decal (Rubicon & Mojave Wheel Decal) Keychain
An absolutely indispensable improvement for vacuum cleaners. Especially during quarantine :)
Good Night Wall Decal, Filament: ERYONE Glow in the Dark Green PLA Printer: Eryone ThinkerS YT: https://www.youtube.com/watch?v=pJX8g61ds60&feature=youtu.be Category: 2D Art
Printed with TPU on a smooth sheet, these decals will stick to any smooth surface with a little moisture - ideal for stopping birds from flying into glass windows
Description I've remixed the case with decals, because I love multicolor decals. :) Print Instructions Printed with standard 0.2mm settings except I have initial layer speed set to 10mm/s. Here's my process for Inlays Place both the top…
This is way old Mesh from the 90th Comic series. Clean Mesh Bot Decals of the original Set ###_ If YOU REMIX -→ MARK as REMIX _### THIS is a bunch of work in the past. BLENDER 2.7x Have Fun
Hello! Thank you for viewing my Wax Seal design. All rights reserved go to Dragonsteel LLC. Also huge shout out to the Coppermind community for having the high quality SVG files compiled, y'all are the best! For printing the seals I think…
After seeing that the new iPhone Pro color was called “Desert Titanium” I knew I wanted to have a nod to the great movie / book series Dune. And what better way to show of your fandom without being too obvious than having the silhouette…
TheJunkDrawer created a perfect ME Mako, all I did was split it to fit on my Anycubic Mono, add connection pegs and a decal sheet created in Photoshop. This model is meant to be resin printed and I included extra door handles due to being…
Stencil for Leica M10 camera - to precisely cut decal for bottom plate protection or functional decoration. Leica Black Chrome models have coating quite easy to damage. Applying textured vinyl film decal is helping to reduce appearance of…
Bear Wall Decal Printed on a non MMU/Palette printer using filament swaps during the print.
This is an inlay for Recall the Boardgame It's cut up into 4 quarters fitting the 28,7 ⅹ 28,7 box The photo's include an old version of the bottom right quarter (section D). I did not print the final version v18 as my gold filament ran…
I could not fine the spare part after my chain guard broke off, so i designed my own. Printed in PETG with 100 % infill and 7 perimeters to allows better grip for screws
Happy owner of a Recalbox-JAMMA , I wanted to put an old SSD with my Recalbox-JAMMA rather than buying an SD card for 2 reasons: - the first: the lifespan of an SSD compared to an SD card. - the second: the USB adapter is cheaper than an…
This blog post, https://blog.prusa3d.com/how-to-print-on-t-shirts_55588/, shows how to 3D-print a t-shirt design and iron it onto your shirt. To do said thing, cover your build plate with a piece of baking paper and cover the baking paper…
It's actually separated into 3 layers of STLs for colour layering, but should be manageable.
Obviously a multi-material print, unless you want to paint it. You can add a magnet strip to the back. If it's going on your car, ASA is the best choice.
The source marked this model as adult content.
Everyone knows flame decals make your car go faster. Imagine what it will do for a buggy. Just a small 3 piece set of flame decals to make your E3D buggy at least LOOK faster. PETG is recommended but PLA worked for me with the silk gold…
The size of the original model was to short for me, so I change it to x2 and modify the lenth to be printed on my Voron 2.4 250x250. The original model is verry nice.
I'm not the original creator of this look, but I am the one who converted it to be 3D printed! Enjoy! Category: 2D Art
Stencil for Leica M10 camera - to precisely cut decal for top plate protection or functional decoration. Leica Black Chrome models have coating quite easy to damage. Applying textured vinyl film decal is helping to reduce appearance of…
I converted the pdf file into an svg file. And in fusion 360, I just made a sketch of the svg and extruded with 0.2mm. I have also attached the f3d file in case changes are desired. On my ender 3 V3 SE I printed with the help of Cura with…
Now for a character from my Starfinder campaign. As usual, scale accordingly using the flat axis. 25mm for a one inch grid. Doesn't print without supports this time. Category: Toys & Games
spray paint decals for a Lightning McQueen costume
The Keyvisual Font for the #Jesus21 Series from the ICF Movement. The Font can be printed as a Decal for Example. Printed wit Black PLA 100% infill 0.15mm Layer Hight
A prusa research tag for your bear conversion 2040 aluminium extrusion that just clips in place, I remixed this from Tomson's endcaps :) Printed in PETG but PLA etc is fine if not in a warm enclosure. Thanks all
Legacy Autobot Skids with Honda Decal and City License Plate to mimic its MP-53 Skids counterpart Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .12 Infill: 100 Filament: Overture PLA Notes:…