Search results: edge

Sort order

4,023 models

P
PrintablesPrint@Hive

Silicone Edge Scraper

Il SiliconeEdge Scraper è il raschietto pratico e resistente, progettato per rimuovere facilmente il silicone in eccesso da spigoli e angoli. Grazie alla sua punta a V di precisione , elimina il sigillante senza danneggiare le superfici,…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant

Downloads
1,586
Likes
831
Rating
4.75
P
PrintablesNordheim

Sanding Wedge fully 3d printed

The thread in this version is not as strong as a normal screw but it worked for me. I had to screw it in a couple of times until it worked good. I printed it as shown in the picture below, used a bit of support for the thread in the main…

Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant

Downloads
1,142
Likes
210
Rating
4.9
P
PrintablesTrajan

Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)

This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
1,086
Likes
132
Rating
4.86
P
PrintablesKiko64

Water meter - AI-on-the-edge

This mount is designed to attach an ESP32-CAM microcontroller to a water meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it can read the water meter…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
914
Likes
45
Rating
5
P
PrintablesGizmo Gurus

DecoEdge: Outlet Wall Plates – Single, Double, and Triple Gang Covers

Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
839
Likes
199
Rating
1
P
PrintablesVoodoo

GARMIN MOUNT for EDGE 1000

Fiz este desenho pois o suporte que tinha do meu garmin 800 não era compativel com o 1000 O que vinha o GPS ficava mais alto. Gosto de o ver em linha com o avanço Isto ainda não é a versão final English version (google translate) I made…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
814
Likes
71
Rating
4
P
PrintablesAllpa

Edge protector for 1" lashing straps / Kantenschutz für 25 mm Spanngurte

Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
520
Likes
47
Rating
5
P
PrintablesFC2M3D

Cute Hedgehog Keychain

Easy to make a cute Hedgehog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.41–€0.51 excl. taxPreliminary estimate for one variant

Downloads
501
Likes
87
Rating
5
P
PrintablesionDynamics

21° angled wedge for trackball mice (compatible with ProtoArc EM03)

Printed it with 10% grid infill, 0.30mm layer height and two perimeters. This leads to a very light print, but putting some EPDM pads on the bottom prevents it from slipping around your desk.

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant

Downloads
480
Likes
43
Rating
5
P
PrintablesMrRogers

Cheese Wedge Door Stopper

Novelty Door Cheese Wedge at 3" by 1.2" (76.2mm by 30.48mm) Prints best with organic supports, pre-sliced for your convenience. A simple design that'll always catch an eye, perfect for that Packers fan or Wisconsinite. WARNING : Please do…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant

Downloads
309
Likes
41
Rating
4.75
P
PrintablesLubosH

Leather splitting, edge chamfer, cutting tool or just scrapper for utility knife

I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
60
Rating
0
P
PrintablesJavar

Calf Stretching Wedge

Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports

Print approx. €47.63–€58.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
202
Likes
43
Rating
5

Washi tape tool | Cut washi tape into fun shapes and patterns! | straight edge, zig zag edge, arrows, chevrons

SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
201
Likes
51
Rating
5
P
PrintablesDrak

Shadow Keychain (Sonic the Hedgehog) pin - Drak

— Shadow Keychain — --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and get the commercial license…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
35
Rating
4.67
P
PrintablesMarianne657

Edge guide and seam guide ruler (metric)

For the edge guide, two 8x3mm magnets are required. This allows the edge guide to stick to the feed plate on most sewing machines. The seam guide ruler has a set of holes to easily measure the distance between the needle and the edge…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
60
Rating
0
P
PrintablesGizmo Gurus

DecoEdge: Switch & Outlet Combo Wall Plates

Overview Easily replace or upgrade your old or mismatched wall plates with these precise, 3D-printable combination covers , designed to fit standard electrical boxes. This collection includes 2-gang and 3-gang configurations for toggle…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
31
Rating
0
P
Printableswerz 99

Edge Connector for square tubes

90° connector for square steeltubes 20 x 20 x 1,5 mm. 2 versions (90° and 45° miter).

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
15
Rating
0
P
Printableshjmcnew

Galaxy's Edge Holocron Stand

The stand is designed to display a Jedi Holocron from Disney's Galaxy's Edge. It has slots for kyber crystals as well as a holder for a lightsaber. The aurebesh on the front translates to “The Force will be with you, always.” NOTE: The…

Print approx. €19.21–€23.48 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
14
Rating
0
P
PrintablesCelta

Sub Terra II Inferno's Edge Insert

Are you tired of the flimsy cardboard insert for Sub Terra II: Inferno's Edge? Upgrade your game night with this modular, 3D-printed insert! Keep all your game components neatly organized, displayed, and ready for action with this…

Print approx. €6.98–€8.53 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
4
Rating
0
P
PrintablesFra Paschal

Stained Glass Holder - Leather Edge Dyeing & Drying Rack - Expandable Display

Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…

Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
25
Rating
0
P
PrintablesPrinter4496

IKEA SKADIS Shelf Edge or Whiteboard Mount

Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
5
Rating
0
P
PrintablesJesseW3D

Razer Orbweaver Gaming Keypad 20 Degree Ergonomic Tenting Wedge

I printed this in PETG on my Prusa Mini+ with 0.25mm layer height and 4 perimeters. The wedge is a bit shorter than the keypad so it would fit on my small print bed. You could easily extend it but it works well as it is.

Print approx. €9.14–€11.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
15
Rating
5
P
Printableskostecki

Unifi G4 Doorbell Wedge (90 degree)

None of the existing wedges for the G4 doorbell fit my needs, so i made one that did. This wedge puts the doorbell at 90 degrees to the door for doorbells that are mounted perpendicular to the door. I didn't trust the snap-on mounting to…

Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
4
Rating
0
P
Printablesfifindr

Flower of Life Coaster – Open Edge

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Bring timeless design to your table with the Flower of Life Coaster – Open Edge ! Measuring 100 mm in diameter and 4 mm in height, this elegant coaster…

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
26
Rating
5

Felt Edge Squeegee for Vinyl

Felt Edge Squeegee for Vinyl Print in the desired size and glue the felt over the edge.

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
4
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Back Widow Left Edge Plug with Cord Pass Through

I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
14
Rating
5
P
PrintablesAinon3Dtisk

Stain dripping from the edge

Hello, Today I have for you a Stain dripping from the edge . It is suitable as a decoration for Halloween! It is like slime :-D. For proper functionality, you need to use a Printing Profile! I used PLA/PETG as the material. No need to use…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
12
Rating
4
P
Printablesjurassic73

MK3 Knurled Knob With Smooth Upper Edge

This is a knurled knob with a tamed bite on the edge where your finger/thumb contacts for comfort. GCODE file has variable layer height to .10 at the top few MM and random seam for a smooth top face. No supports. Print as oriented.

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
6
Rating
5
P
PrintablesEskichagar

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
6
Rating
0
P

FlowIQ 2200 AI On The Edge - Watermeter case

Do you have a Kamstrut flowIQ 2200 and want to make it smart? Then this model is a good option! Simple, easy do assemble and mount on top of your existing system without a hustle! Used hardware for mounting: 4pc M3 hex screw 4pc Hex M3x8…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
3
Rating
0
P
PrintablesRob Latour

Wall mount for Fiskars 23" PowerGear Hedge Shears

This is a custom designed wall mount for the Fiskars 23 Inch PowerGear Hedge Shears. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source…

Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
6
Rating
0
P
Printablesjanek

90 degree edge sanding jig

All on one plate. Main body printed on side , bracket layed flat, both with tree supports. Hardware required: M5x60 hex bolt DIN912 x 2 M5 connecting nut DIN6334 x 2

Print approx. €16.12–€19.71 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
9
Rating
0
P
PrintablesSirPrintsALot

Vice Grip for Angled Table Edge of IKEA Lisabo

Wanted to use this vice grip on my IKEA Lisabo Table but I needed something to flatten the chamfered edge of the table for it to work. Used a countersunk wood screw to hold it onto the table.

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
43
Likes
8
Rating
0
P
PrintablesDaniCzech

Držák na příčníky Thule Wingbar Edge

Když už jsem vyřešil uložení střešního boxu na stěnu garáže, tak jsem si řekl, že pod ním můžou být uložené i příčníky. Chvilkovým hledáním jsem nic nenašel, tak jsem vykonstruoval tyhle. Využije to někdo?

Print approx. €5.26–€6.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
9
Rating
0
P
PrintablesEva Máčová

Hedgehog

coaster, medal, wallart, pendant

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
4
Rating
5
P
PrintablesMohan Das

Edge Protector for Glass Panels

Edge protectors designed for glass or plexiglass panels used inside our homes/businesses. Useful for panels of thickness around 4.8 mm or less. Material: Prusa PETG Print quality: 0.2 mm nozzle Print time: 54 minutes Note: PET is better…

Print approx. €1.31–€1.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
1
Rating
5
P
PrintablesRvdk

Glass bureau - Edge protection

Glass bureau – Edge protection Designed by R_vdk Design date 9/07/2021 Printtime 1h 18min Weight 10 g Dimensions 125 x 26.5 x 18 Application / Functions My desk at work had 2 sharp edges where the glass surface was chipped. I designed…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
5
Rating
0
P
PrintablesGizmo Gurus

DecoEdge: Wall-Mounted Cable/Cord Clamp (IMPROVED VERSION!)

02/05/2025: Improved version! There was an issue with doing print-in-place. The offset was not large enough to prevent fusing of the two parts during printing. This has been fixed. Use a screw driver through the middle opening to work the…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
7
Rating
0
P
PrintablesFifthbear

Edge cutter

styrofoam strip edge cutter for 45 degree angle cuts. Fits up to 65mm wide objects.

Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
5
Rating
0
P
PrintablesKladrie

A cutting-edge Avocado Snipper

After many fruitless years, trying a plethora of handy hints to no avail, we have at last started enjoying success in ripening and consuming avocados from the two trees (of the Fuerte and Hass varieties respectively) which we had nurtured…

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
8
Rating
0
P
PrintablesTom Li

Tami4 Edge custon insert

This is a custom insert for the tami4 edge water dispenser. You can even use the step file for the blank and create your own pattern! I printed this with pla, 0.20mm layer height.

Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
PrintablesCalebTimoteo

Joker (Heath Ledger) Statue - Dark Knight Figures

Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…

Print approx. €26.20–€32.02 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
4
Rating
0
P
PrintablesAaron Ladage

True GDM-10 condenser fan grill spacer for Edgewater replacement motor

If you replace the condenser fan motor on a True commercial cooler (in my case, a GDM-10) with an Edgewater motor , the fan blades will sit just slightly lower than with the original motor, causing them to brush against the grille. These…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
Printablesxijio

Mount It! MI-203 15 Degree Downward Wedge Adapter

Summary This was a quick and dirty wedge for mounting my 28" monitors above my LG OLED. I did some math to determine that from my sitting distance (~4ft) and the height that I'm mounting at (a little over a foot above seated eye level) to…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
2
Rating
0
P
Printablesbertwest

Luge/Sledge Skid Sander

A tool that helps when you want to prepare the skid of a (sports) sledge. I guess the pictures do answer most of the questions. I used M5 screws and thread insert. Printed in PLA. 15% infill. The original is done in FreeCad and I've put…

Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
Printableshakkaisha

Modular Tri‑Wedge Pen Holder

Overview A clean, geometric pen/pencil holder designed to declutter your desk. Each unit features angled interior dividers that keep writing tools upright and separated. Great for home offices, students, makers, and anyone who wants a…

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
1
Rating
0
P
Printables3d_MrFox

Wall Mount for Ferm HTM1010 Hedge Trimmer

Simple wall mount for a Fern HTM1010 hedge trimmer. Updated to v2.0: rounded edges, tighter fit.

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
3
Likes
0
Rating
0
P
PrintablesRalf Hörhager

Sanding Wedge V2

General information As you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. The new design is Fully 3d printed, no bolts or nuts needed. Also check out the Remixes…

Downloads
15,457
Likes
4,677
Rating
4.92

Sonic the Hedgehog! (with Logo)

Watch here: https://youtu.be/-47hep1wdrM With Sonic Mania (hopefully) just around the corner, A Pyro Design and I decided what better time than now to do a full Retro Sonic Logo and bring it to life. He's the logo man so I was tasked with…

Downloads
7,666
Likes
826
Rating
4.88
P
PrintablesFleeeinIan3D

Gear Ball, Free Spinning, Smooth Edges, Great for Kids

Get in on the hype! Welcome to the gear ball! A fun mind blowing fidget toy you've probably seen on social media, but had no clue how it works! Well, rest assured, with these profiles you can make your own free spinning version! The best…

Downloads
7,056
Likes
1,285
Rating
4.88
P
Printablesgimpelginster

Flat-Edged AirPods Pro (2) Case

There is an update version of this model: Flat-Edged AirPods Pro (2) Case 2.0 Printable case for Apple AirPods Pro with flat edges. I've designed two versions, one for the AirPods Pro and one AirPods Pro 2 case. Their dimensions are…

Downloads
6,358
Likes
1,074
Rating
4.79
P
PrintablesWilko_SLO

Baby Edge

Designed to Print without support. You can print with PLA or PETG, but the Best material is Transparent TPU. Glue them with double sided tape over the sharp edge of desk or any other furniture.

Downloads
6,218
Likes
1,038
Rating
4.93
P
PrintablesVoltex

Sunlu FilaDryer S2 Improvement Wedge

So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…

Downloads
5,746
Likes
828
Rating
4.9
P
PrintablesLink

Sonic the Hedgehog Character Cast Sonic (SONIC SONIC) SONIC THE HEDGEHOG SONIC THE HEDGEHOG Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze the Cat Big the Cat Metal Sonic Dr. Robotnik Sonic Sonic Sonic Sonic

A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…

Downloads
5,725
Likes
329
Rating
5
P
PrintablesPeter Farell

Sonic the Hedgehog

Sonic the Hedgehog

Downloads
5,611
Likes
503
Rating
4.78
P
PrintablesPork3D

Phone Stand Herringbone Edge by Pork3D.com

Adjustable phone stand with spring-loaded hinge and mechanical lock. The curved herringbone contact surface supports the device across a wide area while maintaining grip and controlled positioning. The indexed side knob compresses the…

Downloads
5,137
Likes
987
Rating
5
P
PrintablesMateusz Tokarz

Hex-Flex Door Stopper | Honeycomb Wedge

BOM: Printed with ROSA3D High Speed PLA Gray This is a modern, functional door wedge designed with a structural honeycomb lattice. Unlike solid door stoppers, this design utilizes the natural flexibility of the hexagonal geometry. When…

Downloads
4,628
Likes
910
Rating
4.91

Collapsing Katana Single Edged Curved Blade (Print-in-Place)

This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…

Downloads
4,397
Likes
561
Rating
4.36
P
PrintablesJohn Hall

CLICKbase: a no-magnet, latching Gridfinity baseplate - all flush edges, easy expansion, very rigid

CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…

Downloads
4,345
Likes
655
Rating
4.79
P
PrintablesRalf Hörhager

Sanding Wedge

New version: https://www.printables.com/de/model/418290-sanding-wedge-v2 I used an M6 screw and nut to clamp the sandpaper down. The screw and nut are glued in place. I used PLA but ABS would be better. You need to print 3 parts:…

Downloads
4,166
Likes
1,833
Rating
4.93
P
PrintablesPorta 427

Brachio Door Wedge - Stopper

Brachio Door Wedge Bring a little prehistoric fun to your home with the Brachio Door Wedge, inspired by the friendly and iconic Brachiosaurus. Its low-poly geometric design combines functionality with a playful decorative look, making it…

Downloads
4,145
Likes
1,085
Rating
4.83
P
PrintablesEon3D

Bruno the Hedgehog – Small, Adorable & Quick Print

Meet Bruno, the charming little hedgehog that fits right in the palm of your hand! With its cute round shape and spiky details, Bruno is an easy and fun print, ready in just 25 minutes. No supports needed, making it hassle-free for any…

Downloads
4,074
Likes
517
Rating
4.94
P
PrintablesSolenoid

Shadow (Sonic the Hedgehog)

Shadow from Sonic the Hedgehog

Downloads
3,653
Likes
151
Rating
4.2
P
PrintablesART TOO
Downloads
3,612
Likes
460
Rating
4.82
P
Printablesgimpelginster

Flat-Edged AirPods 4 & 5 Case

This is a printable case for the AirPods 4. Since the cases stayed the same between the gen 4 and the gen 5 AirPods this case will fit both. It should stay on without any need for glue or double sided tape and features cutouts for the…

Downloads
3,544
Likes
159
Rating
4.79
P
PrintablesKvantum

Ergonomic 3D printer bed scraper (easy print, rounded edge)

Please leave a like, it really helps! A compact, ergonomic bed scraper designed for safely lifting prints from smooth build plates (PEI, glass, etc.). The wide wedge helps get under brims/rafts, while the loop handle gives a comfortable…

Downloads
3,425
Likes
472
Rating
5
P
PrintablesBuchtomil

Flexi Hedgehog - Bjezek Jenda

Další ze série zvířátek, které tvořím pro svého malého i velkého synka. A tak doufám, že potěší i někoho dalšího. A přeji hezký den.

Downloads
3,396
Likes
747
Rating
4.87
P
PrintablesCatdad Workshop

phone wedge (vase mode)

Why not enter a contest, am I right? I don't typically keep my phone on a stand, but every once in a while, I do need to have it propped up. This stand was designed to be very easy and quick to print (just 30 minutes!), and like a lot of…

Downloads
3,379
Likes
556
Rating
4.8
P
PrintablesDIY Machines

How to build a Giant Hidden Shelf Edge Clock - 3D Printable | Elegoo Arduino Nano | Smart Home | LED

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 I'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and…

Downloads
3,009
Likes
833
Rating
4.88
P
PrintablesJMAW

Serious Edge Banding Trimmer (cheap utility knife blades)

This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…

Downloads
2,812
Likes
510
Rating
4.91
P
Printablesguddl

Wedge / Keil // Door wedge / Tür Keil

I know it's just a simple wedge ... but I needed a few :-) Maybe you need some too? Dimensions 80 mm x 30 mm x 15 mm --- Ich weiß, es ist nur ein einfacher Keil ... aber ich brauchte ein paar :-) Vielleicht brauchst du auch welche? Maße…

Downloads
2,626
Likes
128
Rating
4.89
P
PrintablesSevro

Crayon hedgehog

Crayon hedgehog. Put the crayons in the holes and make the hedgehog spines. Original size of the hedgehog is for thick crayons, if you have standard thin ones you can scale down the model about 20-30%

Downloads
2,527
Likes
726
Rating
5
P
PrintablesAnachronist

Retractable double-edge razor blade scraper

This retractable razor blade scraper is an improvement over one I used to have for scraping burnt gunk off a ceramic stove top. Features: No removable cap to get lost. Snaps into three positions: load/unload, safe storage, blade exposed.…

Downloads
2,248
Likes
311
Rating
4.78
P
PrintablesMakerViking

Cute Hedgehog

Just a cute hedgehog curled up and sitting, that I made for my girlfriend. No supports needed. Added two other versions as well. The Xmas Hedgehog that I made and the Viking Hedgehog that @ Thomllama made. If you want to support my…

Downloads
2,199
Likes
443
Rating
5
P

Sewing Edge Ruler

The latest 3D-designed Sewing Edge Ruler is a tool tailored for utmost precision and flexibility in sewing projects. Engineered with metric measurements, it features detailed markings for both centimeters and half-centimeters, catering to…

Downloads
2,102
Likes
1,255
Rating
4.67
P
PrintablesEdwin Eefting

Fully customizable ventilation grill (with edge)

This Thing is a fully customizable ventilation grill that allows you to construct a wide range of ventilation outlets just by changing some parameters. Use openscad to configure it.

Downloads
2,078
Likes
977
Rating
5
P
PrintablesMorné Kühn

Honeycomb Storage Wall Edges

This is my second 3d printable design I ever created, so please bear with me. I designed this to give the Honeycomb Wall some clean edges for those who want to put it at the edge of a wall or for those who do not like rough edges. I have…

Downloads
2,005
Likes
671
Rating
4
P
PrintablesSenk

Hedgehog

Hedgehog

Downloads
1,940
Likes
329
Rating
4.75
P
PrintablesJERYNSON

Edge Trimming Gauge Tool (10-15-25-30-35-40-50)

Really useful tool for every furniture crafter out there. The tool is modular with different heads for different radii . The adjustable trimming depth makes it versatile for different projects, whether you’re fixing up furniture or…

Downloads
1,866
Likes
933
Rating
4.83
P
PrintablesKijai

Hedgehog

A hedgehog. Can be printed in single color or in 4 colors using a multimaterial printing solution such as the Mosaic Palette or Prusa MMU.

Downloads
1,864
Likes
263
Rating
4.95
P
PrintablesTil Passe

Customizable Wedge

This is a simple customizable (parametric) wedge made with openscad. The length, width, start height, end height and radius are customizable. If you want a plain version with not rounds, just set radius to 0. Software:…

Downloads
1,851
Likes
108
Rating
5
P
PrintablesBuřina 3D

Joker (Heath Ledger)

I have released a completely remastered and improved version of this model with much better details! You can find the new version here: Joker (Heath Ledger) – Bust This highly detailed digital model captures the iconic Joker as portrayed…

Downloads
1,837
Likes
303
Rating
5
P
PrintablesJR

"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel

Opening a door as a firefighter, law enforcement officer or emergency doctor can be a challenge sometimes- but KEEPING it open can be just as important. If you are tired of jamming doormats and trashcans into doorways then this print is…

Downloads
1,787
Likes
191
Rating
5
P
PrintablesFrikarte3D

Sonic the Hedgehog Ring

Relive the excitement of the iconic Sonic the Hedgehog video game with this stunning ring inspired by the legendary golden rings that Sonic collects on his adventures! 🎮 Nostalgic Inspiration: Designed with love and nostalgia for the…

Downloads
1,771
Likes
104
Rating
5
P
PrintablesSenk

Dreamy Hedgehog Sculp

Dreamy Hedgehog Sculp 3D model ready to print.

Downloads
1,766
Likes
235
Rating
5
P
PrintablesJason Skidmore

The Wedgie (Firefighter Wedge / Door Stopper)

I had a co worker ask me if I could make some reusable wedges for him on the 3d printer. Instead of looking for a model that was already availble I descided to design one that has features I would want in a door chock. I printed this in…

Downloads
1,720
Likes
171
Rating
5
P
Printablesgimpelginster

Flat-Edged AirPods Pro 3 Case

I was not able to test this case with real AirPods Pro 3 yet. So if you decide to print this model, please give me some feedback. This is a printable case for the AirPods Pro 3. The top is designed to click right onto the AirPods Case,…

Downloads
1,692
Likes
107
Rating
4.53
P
PrintablesSica

Minimalist open stop Window Keeper / Wedge – Fast Print, No Supports

Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…

Downloads
1,677
Likes
274
Rating
4.63
P
Printables3DPrintyi

Articulated Cute Hedgehog

Tips for printing: Filament: PLA Supports: No! Layer height: 0.16mm (optimal) Wall loops: 3 Infill: 15% Seam position: back Wall generator: classic Detect thin walls: No! Brim: No! BuildPlate: Smooth (Textured Build Plates not…

Downloads
1,570
Likes
247
Rating
5
P

Pom-pom Hedgehog

Description A no-support necessary model of a little hedgehog. All it needs is a fluff ball of some kind - yarn or fur pompoms are perfect. Print size at 100% is 40mm/1.5 in. Can be scaled up or down. The smallest I've printed is less…

Downloads
1,555
Likes
514
Rating
5
P
PrintablesTJJohn12

Kyber Crystals and Container - Inspired by Star Wars Galaxy's Edge

For our visit to Star Wars: Galaxy's Edge this year, I wanted to do some cosplay/bounding featuring kyber crystals. But I didn't have any yet AND didn't want to spend upwards of $20 each to feature a half dozen in my planned props. That's…

Downloads
1,520
Likes
248
Rating
4.9
P
PrintablesBuřina 3D

Batman on the Ledge

This 3D model captures Batman in a commanding pose atop a Gotham City skyscraper. The figure is clad in modern tactical armor with a striking organic cape that contrasts with the sharp edges of the suit. Batman stands on a detailed…

Downloads
1,476
Likes
230
Rating
3
P
Printablesrsilvers

Garmin Edge Stem-Cap Mount for 1-1/8 and 1.25 (Giant Overdrive).

Garmin Edge Mounts that goes under the stem cap. Normal version and a Giant OverDrive version. The mount geometry is partial remix from Eric van Helmond. Category: Sport & Outdoors

Downloads
1,457
Likes
118
Rating
4.4
P
PrintablesTooner.it

Furniture leveling wedge

A simple notched wege to stabilize shaky furniture, you push it gently (notches facing down) under the corner that needs leveling and break it once you get to the desired thickness. Print Settings Printer Brand: XYZprinting Printer: da…

Downloads
1,430
Likes
109
Rating
5

Reolink Doorbell Wedge, adjustable from 10° to 35°

I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…

Downloads
1,346
Likes
85
Rating
4.5
P
PrintablesVertexVanguard

Infinity Cube V3.2 - Rounded Edges

🔥 The Wait is Over: Final Model Version V4 is LIVE! 🚀 Introducing the Infinity Cube V3.2! Building on the legacy of its predecessors, the Infinity Cube V3.2 brings a new level of comfort and usability. Why You’ll Love the V3.2 Improved…

Downloads
1,333
Likes
111
Rating
5
P
PrintablesMakerMeik

Water meter - AI-on-the-edge

This mount is designed to attach an ESP32-CAM microcontroller to a water meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it can read the water meter…

Downloads
1,304
Likes
81
Rating
5
P
PrintablesKocyns

Edge Tissue Box

My next tissue box for paper box Tento (110x110x120mm, WxDxH). It is possible to change the scale to fit your paper box. Print settings: PrusaSlicer: Perimeter: 2 Layer: 0,2mm No Supports Print Settings>Layers and perimeters>Horizontal…

Downloads
1,291
Likes
350
Rating
4.89
P
PrintablesFusionBolt

Sonic the Hedgehog Multicolor MMU

Sonic the Hedgehog remixed for the MMU. Requires a filament changeout from red to skin color part way thru the print. You may want to adjust purge volumes for optimal color.

Downloads
1,271
Likes
160
Rating
5
P
PrintablesEl Manu

GARMIN K-EDGE replacement part

If you have an integrated Garmin support and broke the plastic part, this one is for you ! WARNING : it's designed to work with the aluminum support, not alone (see photos) Print instructions Category: Sport & Outdoors Summary If you have…

Downloads
1,259
Likes
150
Rating
4.86