89 models
Speaker stand for the Edifier R1280DB. There is enough room around all edges to easiy modify for different speakers. See the attached pictures for the dimensions. This will give the speaker a +- 13 degree angle.
I created some stand to tilt the Edifier r1280t a bit. I looks much better now (i think) Please note that i made them a little to deep so a small edge showed at the front. I stuck a piece in to thicken the back a bit so the front edge…
As seen in my workspace redesign video above… Simple two piece wedge style speaker stand design. Trim piece snaps into the wedge and you can add some glue to be sure it doesn't move. Edifier R1280 are great budget friendly near field…
A simple stand I made for my Edifier MR4 studio monitors. Angles them up about 10 degrees which helps with the audio quality if you have them below head level. The filament I used in the pictures is Devil Design Galaxy Black
Couldn't find any MR3 specific stand so decided to make my own. The V4 right one is the one I recommend, it is about 10 degrees tilted up. The V2 left one is about 5 degrees so it is barely any incline. Would probably work for other…
Stand for Edifier MR4 studio monitors. Had to make this model because I wanted the stand that will have better stability
This stand is designed to position your speakers at the ideal height for improving sound clarity. With a sleek and sturdy design, it's not just a stand, but a stylish addition to your desk. Key Features: Optimized height and angle for the…
A simple stand for the Edifier 1280T. I've uploaded both f3d and step files for changing it to your specs.
A 3D printable speaker stand for the Edifier R1700(BT) Hifi speakers. The purpose of this speaker stand (as with any speaker stand) is to raise the Hifi speaker from the desk and slightly angle it upwards so the sound wave can pass…
A stable desktop stand for Edifier MR3, which elevates the speakers by 120 mm and angles them 10 degrees upwards. The base shaft is hollow and provides a convenient way to hide your cables. Printing and assembly: I recommend printing the…
Stand for Edifier MR5 speakers. The 3mf file has been splitted to fit on standard build plate sizes. Front is lifted 4cm, resulting in an angle of 8.3°, ideal for me. If you need different angles, you can modify the f3d file.
Introducing a sleek desktop speaker stand, specifically crafted for the Edifier MR4 speakers (Affiliate Amazon Link), though it is versatile enough to accommodate various other models. Printing Specifications: This stand is 3D printed…
I wanted to mount the Edifier G2000 speakers I use in my hobby room on the wall. Unfortunately they are naturally titled up, so just printing straight shelves would have directed the sound onto the ceiling, not into the room. Therefore I…
The stand fits around the feet of the MR4, I have not tried this stand with any other speakers. Dimmensions included in a screenshot to check fit for other speakers. Infill at or above 15% should be fine.
Edifier M60 Desktop Speaker Stands - 16° Angled Design Custom replacement stands for Edifier M60 desktop speakers that solve the aesthetic mismatch of the original aluminum profiles on modern desks. What This Is These are direct…
Speaker Grill for Edifier MR4 Studio Monitor Speakers, 4" I wanted to protect my new EDIFIER speakers but couldn't find a grill for them. As it could not find any other esthetically pleasing way to attach these I just super glued them on…
I really like my Edifier M200 soundbar. Has USB signal/charging & bluetooth so it's perfect for my setup, using with the PC & laptop in my home office. But…i wanted a way to get it right under my monitor, so it won't get in the way on my…
Designed to precisely fit over the foam feet of the speakers. You can adjust the tilt angle in FreeCAD.
A simple horizontal Stand for the Edifier MR4 (https://amzn.to/4c5HkHZ). No supports, just simple PLA filament.
Downward-facing stand for the Edifier R1280DB bookshelf speakers. The front bracket just fits between the speaker housing and the cover. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you…
Parrilla Altavoz Edifier Voronoi
In the past few weeks I received 3 separate requests for the matching woofer grille for an older design I made earlier. I had some spare time and decided to finish the woofer grille I had already started designing a long time ago. Since…
Стойки для колонок, можно использовать как горизонтально так и классически вертикально, так же во избежание скольжения по столу, рекомендую к стойкам снизу приклеить силиконовые или резиновые ножки, для этого прилагаю длинные перемычки…
Due to the short distance I am from my speakers I made an angled speaker stand. There were others who made the same but they didn't have the look I liked. It's on a 8 degree angle positioned at 90 cm from my seating position. I designed…
I don't use the remote control of the Edifier r1280t much but still didnt want to lose it. So i made a small holder to keep i attached with the speaker :-) Enjoy! Please DONATE if you like my stuff! Print instructions Category: Audio
I really like my Edifier desktop speakers, but I want to make more room on my desk, and the angled shape of the speakers means anything I rest on top of it slides off. I designed a simple shelf with a 10 degree angle, that sits right on…
Remote control holder for edifier r1855db speakers tape :tesa powerband
Hi! This is a standard angled stand for the Edifier M90 . I couldn't find any models out there so I decided to model a fairly simple one; the design is hollow so it doesn't consume much material.
Hi, I made this stand to bring my Edifiers to the right height, since they’re nearfield, it’s quite important for them to be positioned correctly. The stands are designed in a space-age style to match the rest of my work-in-progress…
I'm always in serious danger of losing this little remote. It works with my remote that came with my remote that came with my R2000 DB and I'd guess, but do not know, will work with remotes from other Edifier speakers. Print instructions…
This is a replacement part for the aforementioned headphones. It reuses the original screws and (when done carefully) can be installed without re-soldering the cable with its many flimsy wires. As you can see in the photos, its not a…
Desk remote control holder for Edifier S360DB speakers. I found the remote control to be instable when you want to push button with single finger when the remote is sitting on the desk. So I made this simple holder which adds stability.…
This custom stand was designed specifically for Edifier speakers, offering a perfect fit and a clean, functional look. With a height of 16 cm, it positions the speakers at the ideal level for improved sound projection. The base matches…
Simple holder for Edifier R1700BT remote (RC10G remote model). Helps me to keep the remote handy (glued to headphones holder)
Tightly fits around the Edifier RC10E IR remote. Fits 5 8x3mm magnets, which allows it to mount it to a PC case or to a speaker, provided you stick a metal pad to it first.
I wanted to place @agepbiz controller stand on top of my Edifier R1700BTs speakers, but their top surface is slanted, so I designed this model which makes it horizontal, and has the Xbox stand's female bottom shape so it doesn't move.…
This is a custom bracket I made for mounting the active side of the Edifier 1280DBs' to a HUANUO monitor arm. Monitor arm link: https://a.co/5f6cjKn Speaker link: https://a.co/g4CNhMX Print Settings: 6 walls Infill: cubic subdivision @…
Replacement housing for the internals of the Edifier RC17A/RC80B remote. Uses original PCB, button membrane, battery tray, and IR cover. Snap fit, print without supports. 0.2mm layers with 3 perimeters and 100% infill. Decided to throw…
Acoustic lenses designed to be placed in front of R1855's tweeters. (they are attached through the hex allen slots). The intent of those "lenses" is to reduce the beaming effect in high frequencies. In practice the difference is not huge,…
Magnetic remote holder for Edifier 1280T for easy storage on anything that a magnet can stick to. There already was another remote holder available on this site but I had other magnets laying around. Also, it's fun to reinvent the wheel.…
I find the top angle annoying for setting things atop the speakers. This little design worked a treat for me. No supports or adhesion required. Takes a bit of plastic. I may re-work this at some point to use less material without losing…
Simple horizontal stand for Edifier R1280DB or similar speaker with 114x145mm base. 40mm height allows raise speaker to a more convenient height. Easy to print in one piece without supports. Recommended PET-G or better (I printed from…
Attach it with double sided tape and you are fine. :) I printed it with 10% grid infill and 0.28mm layer height.
Simple Stand told hold Edifier BookShelf Speakers. I used a standard 2x2 and common wood screw to hold it in place. You can also 3d print a vertical support if you dont want to use wood.
Simple holder for my remote that was always lost. Printed standing, without supports, in petg
Layer 0,2mm, nozzle 0,4mm, slow speed, NO cooling 8g transparent Prusament PETG, only 2 perimeters in front. Used similar setup for transparent print https://www.printables.com/cs/model/15310-how-to-print-glass . Designed in ONSHAPE .
I needed a stand for my Edifier speakers, but I couldn’t find a model that fit well, so I designed an optimized version for fast printing. It has 14° to direct the speakers toward the user. I printed it in PETG with 8% Grid infill, 2 wall…
This is a quick little remote holder for an Edifier R1280T because I got tired of losing the thing on my cluttered desk. Its uses one of the small clear command strips to adhere to the side of the speaker or where ever you would like to…
My goal was to create a simple way to mount the speakers on the side of the desk such that they don't take up space on the desk and do not fall. This model introduces a base attaching to the speakers with screws and a tapered shaft…
Adjustments made to be able to support Edifier R1855DB boxes weighing 6kg each. Strengthening the supports and pressure
Used this stand for my sim racing setup as the speakers sit on the floor. This base allows the speaker to face up towards the driving seat, making for much better audible difference in sound delivery, compared to the speaker just sitting…
The ramps that came with the Edifier M60 speakers are a bit too tall to fit under my monitor the way I'd like, so I designed some that are a bit shorter. It's a roughly 11.5 degree ramp that lifts the front of the speaker about 32mm.…
This stand is designed to elevate Studio Monitor, to fit Edifier MR4 Studio Monitors. Plate size is 140mm x 160mm and are 200mm tall. The stand column was designed to fit around 25 mm tube, for strength and positioning of the 2 parts. To…
No supports EDIFIER TWS1 Pro holder for Ikea SKADIS pegboard
Rounded bookshelf stand for Edifier speaker.
Designed a dust cover for the front aux ports on the Edifier MR4's
This model is designed for the Edifier MR4 speakers. I wanted to mount them on my sim racing rig made from 40x40 mm and 80x40 mm Item (Type I) aluminum extrusion, but couldn’t find an appropriate solution. With this mount, you can use a…
Overview: This Edifier headphone support is a functional and aesthetically pleasing accessory designed to keep your headphones organized and easily accessible. It’s perfect for mounting under desks, shelves, or any flat surface. Features:…
Basic desktop speaker stand for Edifier S350DB bookshelf speakers, nothing existed for what I wanted so I quickly threw this together. This raises the speakers 130mm off the surface but I may revise this and make them taller as they…
The remote that comes with the Edifier speakers is a round disc. Not a very useful or convenient design. I needed a way to hold the puck off near the speaker so that I cannot lose it, I aIso wanted to protect my speaker from the potted…
Descrep supports for the Edifier MR4 speaker set that gives you the option to select from 7 different angles thanks to the little slots in the main support this way you can find the angle best for you.
Edifier R1855DB are great, cheap speakers - you can use it to PC computer or as me - as TV speakers in small room. Wait, but speakers in them are inclined at 10 degrees - and here was my problem. I wanted to sit on the sofa, not near my…
Printed in PLA + using 15% infill
Couldn't find any good shelves for my speakers, so decided to design my own. To mount it to the Skadis itself you will need 10 clips in total, you can grab them here:…
I modified the top plate from the original Edifier MR4 stand design by FunFunBoy. Great design. Modified the feet holes and size of the top plate to accommodate the Edifier R1280DB nicely. Note: You need to print the "core", "accent…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Pilot walał mi się po biurku, więc zacząłem…
Speaker Bracket (Edifier R1280DB and similar) A wall or corner-mounted speaker bracket designed around the Edifier R1280DB but compatible with any speaker no wider than it (else it will touch the walls on the side). Speaker faces 30° down…
Designed to print fairly fast standing on-end. The fit is fairly tight, intended to be rarely removed from the holder. Does need supports for the pegs. Standard straight grid supports as a single column for both legs seemed most efficient.
Diese Untersätze sind stabil, sind schick und passen meiner Meinung nach perfekt zu den Lautsprechern des S351DB. Die Aussparungen für die Gummifüße der LS sind gleichmäßig angeordnet - die am LS selber nicht. Es ist also notwendig…
7 inch stands designed for Edifier m60 speakers 100mm x 147mm platform Adhesive foam stuck to the bottom of the base to dampen vibrations and increase grip. I used this Parts were modeled with holes to glue in 6x3mm magnets, but they are…
A cradle for the Edifier RC80B Remote Contol. Designed to be mounted on the side of a desktop with 2 wood screws.
A 3D-printed, friction-fit remote mount for bookshelf speaker stands. Features a 'floating' aesthetic for a clean, integrated look that declutters your workspace.
Edifier QR30 VESA support bracket
Did you pick the wrong color for your Edifier m60 Speakers? They sound FANTASTIC, but your spousal approval factor is torpedoed by your admittedly poor sense of aethetics? Go from ZERO to HERO by printing yourself replacement Speaker…
if you've lost the knobs, this is a good replacement for the herd
CASE Edifier W110t (TPU filament)
Important: Please print the model on the left or right side for a smooth surface (where the speaker is standing on).
Acoustic lenses designed to be placed in front of R1855's tweeters. (they are attached through the hex allen slots). The intent of those "lenses" is to reduce the beaming effect in high frequencies. In practice the difference is not huge,…
Diese Untersätze sind stabil, sind schick und passen meiner Meinung nach perfekt zu den Lautsprechern des S351DB. Die Aussparungen für die Gummifüße der LS sind gleichmäßig angeordnet - die am LS selber nicht. Es ist also notwendig…
This is a quick little remote holder for an Edifier R1280T because I got tired of losing the thing on my cluttered desk. Its uses one of the small clear command strips to adhere to the side of the speaker or where ever you would like to…
Simple horizontal stand for Edifier R1280DB or similar speaker with 114x145mm base. 40mm height allows raise speaker to a more convenient height. Easy to print in one piece without supports. Recommended PET-G or better (I printed from…
Stand for Edifier MR5 speakers. The 3mf file has been splitted to fit on standard build plate sizes. Front is lifted 4cm, resulting in an angle of 8.3°, ideal for me. If you need different angles, you can modify the f3d file.
if you've lost the knobs, this is a good replacement for the herd
The ramps that came with the Edifier M60 speakers are a bit too tall to fit under my monitor the way I'd like, so I designed some that are a bit shorter. It's a roughly 11.5 degree ramp that lifts the front of the speaker about 32mm.…
I find the top angle annoying for setting things atop the speakers. This little design worked a treat for me. No supports or adhesion required. Takes a bit of plastic. I may re-work this at some point to use less material without losing…
Description This stand is designed to position your speakers at the ideal height for improving sound clarity. With a sleek and sturdy design, it's not just a stand, but a stylish addition to your desk. Key Features: Optimized height and…
A newer version of the grilles, including the woofer grille, can be found here To protect my new Edifier S350DB speakers I designed this protective grill.
