Search results: erv

Sort order

4,165 models

P
PrintablesTechNerd

AirManagerV2 recirculating air filter for 3d printing enclosure

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…

Downloads
2,702
Likes
1,501
Rating
4.79
P
PrintablesJan-E.de

Easter Bunny Napkin Ring / Osterhase Serviettenring

The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…

Downloads
2,279
Likes
358
Rating
4.97
P
Printables44sunsets

The Observatory: a parametric vertical laptop stand for the M1 Pro/M1 Max MacBook Pro (2021)

I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…

Downloads
2,088
Likes
273
Rating
4.95
P
PrintablesStevenTh

Mini ITX server rackmount 2U

Intro I've designed this case as a replacement for my current home server. The drive capacity has increased so much the last years, you need a lot less drives to get the same or more capacity. My current home server is already 10 years…

Downloads
1,372
Likes
505
Rating
5
P
PrintablesAnubiz3D

2.5" HDD / SSD Caddy for HP ProLiant Server G5 G6 G7

This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…

Downloads
1,253
Likes
139
Rating
4.8
P
PrintablesMSTVS

pinch valve powered by servo

Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…

Downloads
927
Likes
64
Rating
5
P
PrintablesSHR3D.eu

Jiji - Kiki's Delivery Service (flexi cat - Large)

The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…

Downloads
915
Likes
229
Rating
4.79
P
Printablesjackknrsh7

19" 3U Server Rack Fan Panel

Things were getting a bit hot behind my home-lab rack, so I figured additional cooling was needed. I slammed together the geometry of 3 of @KennyVerhoeve_588554 's blanking plates in order to get the requisite size, made some holes to…

Downloads
760
Likes
203
Rating
4.67
P
PrintablesBodo

Stackable Insertbox - feet and variant overview (Sortimo/Bosch/Auer/others)

This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…

Downloads
672
Likes
156
Rating
4.63
P
PrintablesSHR3D.eu

Jiji - Kiki's Delivery Service (flexi cat - small)

The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…

Downloads
664
Likes
128
Rating
5

Revolving cake stand for icing & serving 30cm (12 inch) capacity

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop 🏆 To celebrate the win I've added Low-Profile Legs that reduce the height 5cm! 🎆 It's Lazy Susan Mode!! 🍰 MMmmmmm This is purpose-built to make icing a breeze. Retaining rings…

Downloads
636
Likes
465
Rating
5
P
Printableslmatula

HP microserver gen8 odd to ssd bay

odd→ssd bay can use original front pannel

Downloads
552
Likes
40
Rating
4.89

Ford Service Sign 2 Color

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: Start with White, then Blue. Quick Guide to changing filament~ Have some paper to push…

Downloads
396
Likes
119
Rating
5
P
Printablesjanpetrik72

Holder for micro servo SG90

Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…

Downloads
355
Likes
53
Rating
0

Vintage Pontiac Service Sign 3 Colors

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Blue, Red. Quick Guide to changing filament~ Have some paper to push away extruded…

Downloads
340
Likes
83
Rating
5
P
Printablesdjedje_zr7

Service Key (elevator, maintenance room, electricalbox, fireman ladder)

Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8

Downloads
333
Likes
61
Rating
4.5
P
PrintablesPeter Farell

Melting Soft Serve Cone.

Melting Soft Serve Cone.

Downloads
324
Likes
104
Rating
5
P
PrintablesNick Esselman

Pi camera servo arm for octoprint

Notice: it's not only for the ender 3 v2 Model descriptions: arm rail mount for a aluminum extrusion (tested on ender 3 v2 extrusion) this one the just tall enough to peak over the ender 3 v2 bed height, this is around 10 cm and 12 cm…

Downloads
317
Likes
50
Rating
0
P
PrintablesSJM

"Lokliege" Model Train Service Port H0

H0 1:87 Model Train Service Port “Lokliege”. You get a single 245mm width or five connectable sizes (100mm, 150mm, 200mm, 225mm, 240mm) to build the width you prefer. It will fit at least all H0 1:87 model trains but maybe usable for…

Downloads
312
Likes
44
Rating
5
P
PrintablesWhitey4405

Hope Brake Caliper Servicing Tools

Hope brake calliper servicing tools consist of two bleeding blocks and a tool to release each individual piston one at a time for lubricating. The tools will suit Hope V4, E4 and RX4 callipers. Printing Information 0.2mm layer height…

Downloads
306
Likes
27
Rating
0
P
PrintablesSnuff Klko

Minerva McGonagall funko POP!

Print & acrylic draw

Downloads
224
Likes
45
Rating
0
P

DIN rail mounting for server rack

I needed an easy way to hold a DIN rail to the side of my NavePoint 15U wall mount open frame server rack. These parts allow you to mount the DIN rail on the side of the rack with a slotted endcap to help adjust for a variable length rail.

Downloads
216
Likes
65
Rating
0
P
Printableswedgeworks

Salt Gun Reservoir Lid

I really do love this thing. Florida has a lot of flies. About 6 months after purchasing “it broke.” You know, as in, “no one knows who did it they just found it like that.” I've been keeping it attached with duct tape like a peasant. Now…

Downloads
197
Likes
14
Rating
0
P
Printablesquattro

Volkswagen Service Guy and Rabbit

Of course there are countless VW logos out there but all are only STL files and thus not really adaptable. This is different. I traced the SVG files more or less by hand from bitmaps and they are clean so OpenSCAD can use them without a…

Downloads
188
Likes
36
Rating
5
P
PrintablesFlo

Tool for VW Common Rail Diesel Engines Oil Filter Drain Reservoir (13 mm) Golf 7 and others

With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…

Downloads
178
Likes
22
Rating
5
P
Printablestom

Ventilkappe Schraderventil mit Werkzeug/ Schrader valve cap with tool

Siehe auch " Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model “Schrader valve cap with tool ” Vor allem am Vorderreifen unseres Elektrorollers Mi 3 ist es sehr schwierig, die Ventilkappe zu…

Downloads
173
Likes
10
Rating
5
P
Printablesnilok

Raspberry Pi Camera Case - OctoPrint - Security Server

This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…

Downloads
172
Likes
25
Rating
5
P
PrintablesIridium

Vianočný držiak na servitky - XMAS napkins holder

Aby mal držiak peknú texturu z pohľadovej strany rozrezal som ho v sliceri na polovicu s kolíkmi pre správne poskladanie a vytlačil som ho na smooth plate. Možno bude potrebné trochu očistiť vytlačené kolíčky alebo trošku zväčšiť dierku.…

Downloads
168
Likes
32
Rating
5
P
PrintablesvmLOGIC

Toilettenpapierhalter mit Reserverollen / toilet paper holder with spare rolls

Für die Grundkonfiguration mit einer Reserverolle sind folgende Modelle erforderlich: The following models are required for the basic configuration with one spare roll : 1 x Rollenhalter 1 x L-Form oben links 1 x L-Form oben rechts 1 x…

Downloads
150
Likes
49
Rating
0
P
PrintablesSHR3D.eu

Service flashlight Makita

When working around the car, in the workshop or in the garden, a durable portable light is often useful. At the same time, many of us have Makita tools on hand and with this mounting, spare batteries can be used for lighting. This simple…

Downloads
144
Likes
41
Rating
0
P
PrintablesRonny

Serviettenring

Dieser Serviettenring wird in zwei Teilen gedruckt und anschließend an der vorgesehene Vorrichtung zusammengedrückt. Für besseren halt kann man die teile mit ein tropfen Sekunden Kleber zusammenkleben.

Downloads
122
Likes
19
Rating
0
P
Printablesdaroz

Motor Controller Mount for SDS MK4 Swerve Drive (FRC)

Primarily for use in FIRST® Robotics Competition robots that use the Swerve Drive Specialities MK4 Swerve Module , this is an integrated motor controller and CAN bus connecter mount. Designed for FRC team 5881, the Tech Valley High School…

Downloads
119
Likes
11
Rating
0
P
PrintablesSomnus

Host-swap SFF 2.5" caddy for FUJITSU PRIMERGY servers

You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…

Downloads
118
Likes
9
Rating
0
P
Printableslienmeat

5g servo mount

This is a lightweight servo mount for 5 gram servos. I designed it specifically to fit EMAX ES9052MD, but I can confirm it fits Flite Test PP A 5g servos just as well and probably most other 5g servos. Printing: 0.2mm layer height or…

Downloads
116
Likes
8
Rating
0
P
Printableshoco

1x2 Gridfinity Magnet Server

This 1x2 Gridfinity module holds a stack of 40 6x2mm magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray, always in the same polarity. You can operate the magnet server with one hand. There are…

Downloads
116
Likes
29
Rating
4
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Downloads
107
Likes
16
Rating
5
P
PrintablesLe John

Govee thermometer basket for server rack

Compatible with this Govee thermometer or any other device that fits in the basket hole:66x21.5mm

Downloads
99
Likes
34
Rating
5
P
Printablesamitgm19

MK4 Swerve Module Grease Shield - FRC

This design is easy to install and does not need any disassembly for the installment process

Downloads
97
Likes
15
Rating
5
P
PrintablesNicuradse

Service Key for Perlator (24mm & 28mm)

Always had issues with removing the perlators from the tap to clean them. In the past just used a wrench, but always damaged and scratched them. So I finally decided to design a tool for it and print it. Hope you find it usefull. Print…

Downloads
97
Likes
14
Rating
0
P
Printableswedgeworks

2.5 inch Drive SSD Adapter Bracket for Servers ($1 Print!)

A 2.5-inch SSD adapter for a 3.5-inch drive bay is a hardware accessory designed to allow the installation of a smaller 2.5-inch solid-state drive (SSD) into a larger 3.5-inch drive bay. The primary purpose of this adapter is to provide…

Downloads
96
Likes
5
Rating
0
P
PrintablesPeter Farell

Kufic Script Serving Tray

Kufic Script Serving Tray or Plate *Roughly translates to “Eat More Peaches” *No it does not. I have no idea what it says… so if you know how to read Arabic Kufic then please let me know if it is NOT COOL. For those interested this…

Downloads
90
Likes
31
Rating
0
P
PrintablesJimleeQ

Gridfinity 1x1 SG90 servo mount or storage

A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…

Downloads
83
Likes
19
Rating
5
P
PrintablesIncalculable

Plugin Servo Connector

This is a servo connector compatible with the Skywing RC connector system. Designed to be printed in PETG with supports on "build plate only". Fits standard Servo connectors, i used the powerbox servo plugs and sockets. The connector…

Downloads
79
Likes
7
Rating
0
P
Printablessportluffi

Danish Video overvågning (CCTV) sign

This sign can be used to comply with regulations when using CCTV in Denmark. Print is sliced with Prusaslicer with color change at layer 12. Can be mounted with M3 screws. This sign is made by the Customizable Warning Sign script by Stone…

Downloads
76
Likes
6
Rating
5
P

Overview/test of fillers / přehled/test výplní

17 fillers from PrusaSlicer 17 výplní z PrusaSliceru

Downloads
73
Likes
9
Rating
5
P
PrintablesJCPhlux

Server Rack 1.3U Mounts (Cage Nut Replacement)

Server rack screw and cage nut replacement. I remixed this to for 1.3U items that fit on a standard 19" server rack. This is just the 1.3U Mount you will need the nut from Spartan's Server Rack 1U and 2U Mounts (Screw and Cage Nut…

Downloads
73
Likes
24
Rating
0
P
PrintablesSuM.Schiedt

Hydroponic - Rohrhalterung mit wiederverwertbaren Kabelbindern / Pipe holder with recyclable cable ties

Rohrhalterung mit wiederverwertbaren Kabelbindern für Hydroponik-Anlage mit 6,3 cm Rohrdurchmesser. Damit können höhere Pflanzen vor dem Umfallen bewahrt werden. Um in meiner Hydroponik-Anlage auch höhere Paprikapflanzen aufziehen zu…

Downloads
61
Likes
5
Rating
0
P
PrintablesSteam Labs

FTC Robotics - Servo Warning Label

Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.

Downloads
60
Likes
7
Rating
0
P
PrintablesJP design

Červený Trpaslík Arnold Rimmer Smeg Head Red Dwarf

Arnold Jidáš Rimmer, BDP. SDP. Maaaaaaaaaaaaaaaagooooooorrrrrrr!!! :))

Downloads
58
Likes
19
Rating
5
P
Printableskrasnov777

Webcam frame with servos (MG90s)

Use file servo-to-print. Web-cam-servo is for reference to see how to mount your servos. I can also share the pi case, but it's pretty basic.

Downloads
55
Likes
9
Rating
0
P
Printablescyrus31

porte serviette pour sèche serviette+renforcer

idéal pour les familles nombreuse qui ce batte la place sur le sèche serviette. les cotes sont ceux d'un modèle standard de sèche serviette. modèle renforcer en plus au cas ou vous avez des brutes dans la famille. je vous donne le g-code…

Downloads
48
Likes
7
Rating
5
P
Printablesseekerbot

eBike adapter for bike service repair stand

My service stand (KESSER Fahrradmontageständer Profi Reparaturständer - https://www.kaufland.de/product/429968041/ ) could hold my ebike ( Carver Route 4.10 2022 ) but it did not look very trustworthy… so I made these adapters. In case…

Downloads
44
Likes
7
Rating
0
P
Printablestom

Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model "Schrader valve cap with tool"

Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…

Downloads
41
Likes
2
Rating
0
P
PrintablesMichaelKroes

Medtronic x/23/54 Veo insulin reservoir protection

This is a case for the Medtronic insulin pumps commonly used in DYI closed loop systems. My son is a type 1 diabetic and sometimes the insulin reservoir would come loose from the pump. The manufacturer makes clips for these pumps, but…

Downloads
40
Likes
4
Rating
0
P
Printablesetarina

Nespresso Original Water Reservoir Cover

My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…

Downloads
35
Likes
3
Rating
0
P
Printablescookiecrook

Hunter Douglas PowerView Hub Mount

Hunter Douglas PowerView Hub Mount. Open front remix of @3DMason's original mount. Substantive change to allow mounting without unplugging in any orientation. Editorial changes to allow for printing without supports.

Downloads
35
Likes
2
Rating
0
P
PrintablesOnur SÖYLER

cervical vertebrae stand

I designed this stand for the flexible Spine model, designed by @KarelPenicka, which I like very much. I leave the link for those who are interested. https://www.printables.com/model/704103-flexible-spine

Downloads
32
Likes
6
Rating
0
P
PrintablesRob Latour

ESP32 NTP Stratum 1 Time Server case

Edit: update April 2026 to support version 2, and the ESP33-P4-ETH (with or without the POE Hat) but files also include support for the Olimex ESP32-PoE-ISO Rev. B used in version 1. full project on:…

Downloads
31
Likes
9
Rating
0
P
PrintablesCranky Cat

Kyosho Burns steering servo mount

I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…

Downloads
29
Likes
4
Rating
0
P
PrintablesJoergH

Radio Reparaturständer Service Frame für Röhrenradio - Repair Chassis Stand - Tube Radio

Erleichtert die Reparatur von Radios und das lästige Umdrehen. Scheiben und Füße "müssen" in TPU gedruckt werden, alles andere in PETG. Mit Scheiben aus PETG, PLA usw lassen sich die Arme mangels Friktion auch mit Gewalt nicht festklemmen…

Downloads
28
Likes
5
Rating
0
P
PrintablesArnaud

Wireless interview Go - Mk4

I did shorten the handle to fits in my Mk4, and modified the cylindre to be able to use the fuzzy skin instead of the original pattern because I personally prefer it.

Downloads
22
Likes
4
Rating
0
P
PrintablesBooks

Kraft Macaroni Single Serving Size Bowl & Lid

3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.

Downloads
21
Likes
2
Rating
0
P
PrintablesZoshi

Macap M2 coffee bean reservoir

This is a replacement bean reservoir for the Macap M2 coffee grinder. The original lid still fits on this one. It should be printed in vase mode. I printed it in vase mode with a 0.6mm nozzle. It turned out flexible but sturdy.

Downloads
18
Likes
2
Rating
0
P
Printableslorys

module de rangement modulaire pour servante

une boite de 8 cm par 9 cm et de 7,5 cm de haut un boite de 9 cm par 12 cm et de 7,5 cm de haut

Downloads
18
Likes
3
Rating
0
P
PrintablesOlaf

Effervescent Tube Stand

Stand that holds up to nine (29 mm diameter) tubes of effervescent tablets. Models for 4, 6 and 9 tubes are included. A small testprint is included so you can check if the printer tolerances will allow for the tube to fit. The diameter of…

Downloads
17
Likes
3
Rating
5
P
PrintablesMatthew Schultz

MJS.ART r0tring Isograph Reservoir Funnel

I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…

Downloads
17
Likes
1
Rating
5
P
PrintablesMatthew Schultz

MJS.ART Koh-i-Noor Rapidograph Reservoir Funnel

I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…

Downloads
14
Likes
1
Rating
0
P
PrintablesMatthew Schultz

MJS.ART Staedtler Mars Matic Reservoir Funnel

I use Staedtler Mars Matic technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…

Downloads
13
Likes
0
Rating
0
P
Printablesnaskk

Handle for garden hose reel Verve

The original hose reel handle is not very comfortable. I made several attempts and came up with this solution, which I'm sharing with you. Verve hose reel purchased at Castorama building market. Oryginalny uchwyt/rączka do zwijania węża…

Downloads
13
Likes
2
Rating
0
P
Printablesdudeman

Bushnell Powerview 16x50 Binoculars Eye Cover

First model post, feedback appreciated! Needed replacement eye covers for my Bushnell Powerview binoculars gifted to me a while back and thought why not just measure the one I had left and reprint them!

Downloads
13
Likes
2
Rating
0
P
PrintablesMartin Kappler

Držák kartáče Lifeheit rotaro powervac 2v1 16v

Leifheit rotaro powervac 2v1 16V patka pro motor a kartáč s ložiskovou dírou

Downloads
10
Likes
0
Rating
0
P

servo connector for sw-1200

Remix of another model to fit sg-1200

Downloads
7
Likes
1
Rating
0
P
PrintablesTheLogical

10" Serverrack Power panel

Power panel with C13 Plug, a toggle switch and 4 illuminated buttons Toggle switch: https://de.aliexpress.com/item/4000262590867.html?spm=a2g0o.order_list.order_list_main.301.76db5c5fKgg51I&gatewayAdapt=glo2deu Buttons:…

Downloads
7
Likes
1
Rating
0
P
PrintablesDutchDev

ZN50QT-A/Znen Snail Scooter Replacement Indicator (Minerva/Lexmoto Tommy/Znen/Zoë/Scooty Compatible)

This replacement indicator for the ZN50QT-A type scooter from Minreva (normally also fits Lexmoto Tommy 50 and Znen/Zhongneng models) was impossible to find/source anywhere while I was repairing one. After 20+ hours of measuring,…

Downloads
7
Likes
0
Rating
0
P
PrintablesMichal Pešek

Hoop adapter to HARIO server

Print settings: Nozzle: 0.4mm Material: PETG Layer height: 0.2mm Perimeters: 4 Top/bottom full layers: 7/6 Infill: 15% Supports/brim: NO STL is oriented to print

Downloads
6
Likes
0
Rating
0
P
Printablesnologoearth

F!NGERViSE - A Small Wearable Vise

Design F!NGERV!SE is a versatile sleeve worn over two fingers, equipped with two levers for easy operation. By simply pushing with the thumb, users can open and close each part of the vise independently. This innovative tool is perfect…

Downloads
5
Likes
5
Rating
0
P
PrintablesDany Sánchez

The Overview - Steven Wilson Album Coaster

🌌 THE OVERVIEW I incline myself to space There was no ghost on the moor No open window No monkey's paw I love Steven Wilson's music, and so I created a set of 3D printable abstractions to represent his discography. This can be used as a…

Downloads
4
Likes
2
Rating
0
P
PrintablesOBA

Märklin H0 modular Bridge with Railing Rail-C 180mm Straight Element (multi-part) / Märklin H0 modulare Brücke mit GeländervGleis-C 180mm Element gerade (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Downloads
4
Likes
1
Rating
0
P
PrintablesRoland83

crochet pour serviette de toilette

crochet pour sèche serviette à barres horizontal. Employer du PETG ou autre matériaux qui résiste à un minimum de chaleur pour éviter une déformation quand le sèche serviette chauffe. 2 périmètres, 15% de remplissage.

Downloads
3
Likes
2
Rating
0
P
PrintablesChristian

Staubsauger Serverin Ersatz-Halter

Verwendete Nozzle N0.4 Schichthöhe 0.2 mm Material PLA Infill 15% Modell Staubsauger Schnapper 22.4 muss für die zweite Schlauchseite gespiegelt werden, ich druckte das Modell mit Rand und Stützstruktur.

Downloads
0
Likes
0
Rating
0
P
PrintablesNatalie T

Modular 10 Inch Server Rack - Reworked

Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…

Downloads
6,707
Likes
1,414
Rating
4.93
P
PrintablesMcBig

10 inch server rack

This is printed 10 inch server rack designed for printer with plate 250 mm x 200 mm (Prusa MK3), but some parts (rails) need the bigger one (Prusa XL). Rack has standard sizes, see https://en.wikipedia.org/wiki/19-inch_rack Rails can be…

Downloads
6,129
Likes
917
Rating
4.85
P
PrintablesLudvig Broomé

Micro Servo 3D Model (STP)

3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.

Downloads
6,016
Likes
55
Rating
5
P
PrintablesAuri3D

Servo SG90 and Arm

This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…

Downloads
4,153
Likes
70
Rating
0
P
PrintablesLudvig Broomé

Standard Size Servo 3D Model (STP)

3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.

Downloads
4,112
Likes
39
Rating
5
P
Printablesgi0v1_05

MG996R Servo Motor

MG996R Servo Motor

Downloads
4,066
Likes
26
Rating
5
P
Printablescohenco

MG995 Standard Servo Arm/Horn

Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo

Downloads
3,054
Likes
122
Rating
4.5
P
PrintablesTJDesign

Bean reservoir (hopper) extension Philips Saeco 1200-5500 (latte go) series

Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…

Downloads
2,693
Likes
162
Rating
4.72
P
Printablesmobiobi

Easy Robot Arm (SG90 servos & now steppers too) UPDATED 03/21

Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…

Downloads
2,592
Likes
345
Rating
5
P
Printablesvrsn3ptoh

Parametric 10 Inch Server Rack Mount

Update April 10th, 2026: FreeCAD 1.1.0 broke the model in several places. I believe I have fixed everything and have reuploaded as "generic__mount_v110.fcstd". Let me know if the model doesn't work for you! Update Sept 6th, 2025: I have…

Downloads
2,438
Likes
543
Rating
4.75
P
PrintablesStreelyDan

Mini Rack 10" server rack for NavePoint or Gator Rackworks rails

Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…

Downloads
2,397
Likes
664
Rating
4.86
P
PrintablesChris

10in Home Server Project

I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…

Downloads
2,381
Likes
504
Rating
5
P
PrintablesRRD

MG90S Servo

1 to 1 scale of a MG90S servo. Could be convenient for projects to build in your servo!

Downloads
2,375
Likes
42
Rating
5
P
PrintablesWave

SG90 SERVO HORN

This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions

Downloads
2,290
Likes
63
Rating
5
P
PrintablesMeyui

Komori Planter with Reservoir

Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…

Downloads
2,272
Likes
963
Rating
4.71
P
Printables3d_creativa

Planner calendar stencil (monthly overview)

Stencil dimensions: A6 (14.8 x 10.5 cm) Thickness: 1 mm Square dimensions: 2.8 x 2.8 cm Stencil fits perfectly to a 0.5 cm dot grid pages in bullet journal. Wave pattern on the top and zig zag pattern on the bottom of the stencil can be…

Downloads
2,234
Likes
981
Rating
4.73
P
PrintablesExLoop

Servo horn round for 55G Servo (25T spline)

This is a round servo horn for a 55G Servo with 4 M3 holes.

Downloads
2,175
Likes
47
Rating
4
P
PrintablesCB4D

Microlab - Mini Modular Home Server Rack

Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…

Downloads
2,130
Likes
945
Rating
4.94
P
PrintablesAviation Design

1:400 Ground Service Equipment (GSE) For 1:400 Airports And More

Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…

Downloads
2,074
Likes
48
Rating
0