Search results: ethernet

Sort order

559 models

P
Printablestm108

Ethernet RJ45 Repair

This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports

Downloads
1,812
Likes
275
Rating
4.62
P

Prusa Mini power and ethernet cable stress relief v2

update: This model has updated to v2 having now stress relief for power and ethernet cable. --- Stress relief for Prusa Mini power and ethernet cable. I felt like the power plug moved too much and possibly caused stress for the power…

Downloads
864
Likes
257
Rating
4.97
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock

An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…

Downloads
810
Likes
66
Rating
4.83
P
PrintablesArnoud Hubach

Starlink Ethernet Adapter Wall Mount

This wall mount is designed for the Starlink Ethernet Adapter. There is room for the cables to connect into both sides. Optimal design for 3D printing, made to be strong, durable, and reliable. The Starlink Ethernet Adapter fits tightly…

Downloads
773
Likes
88
Rating
5
P
PrintablesBear3DTek

RJ45 ethernet boot/cap/cover/ works post crimping

Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…

Downloads
403
Likes
61
Rating
3
P
Printablesmattala

RJ45 Ethernet Rescue Clip

I was inspired by the many designs for RJ45 repair clips, but they all suffered the same issue - the retainer part was bulky, fragile and never fitted my oddball collection of cables. They also required supports. The cable tie method fits…

Downloads
336
Likes
53
Rating
5
P
Printableszuberio

Ethernet Port Cover - Print Orientation & Hex Remix

Remixed the ethernet port cover to print in an orientation that makes it far less likely to break off within the port. This orientation also increases the part surface on the build plate - reducing the need for brims. Finally, I changed…

Downloads
336
Likes
63
Rating
5
P
Printableslucasassisro

Ethernet cable wall guide

Remix of https://www.printables.com/model/321603-ethernet-cable-wall-mount

Downloads
190
Likes
35
Rating
5
P
Printablesscrypt

Ethernet Cable Comb (Cat5e)

After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…

Downloads
146
Likes
19
Rating
4
P
PrintablesPadu

Clip en couleur pour câble Ethernet

Filament : PLA Nozzle : 0.25mm Layer: 0.15mm Dimension : D8 x d6 x H8 Clip en couleur pour, par exemple, localiser les ports d'un switch connectés sur le même VLan Color clip to, for example, locate the ports of a switch connected to the…

Downloads
59
Likes
5
Rating
5
P
PrintablesSH

Kleine Kabelrolle für W - LAN - Ethernet - Kabel, zum aufrollen

Netzwerkkabel lassen sich Platzsparend aufwickeln und aufbewahren. Verlegte Kabel sind oft zu lang und sind schwer irgendwo zu “verstecken”. Mit dieser Kabelrolle lässt sich die überschüssige Kabellänge bequem auf wickeln, mit den…

Downloads
53
Likes
9
Rating
0
P
PrintablesMarcWinNJ

Ethernet (RJ-45)

Hatchbox PLA .20 quality

Downloads
42
Likes
4
Rating
0
P
PrintablesTechInTheWings

Ethernet Wall Clip

Clip to hold Ethernet cable. Cable press fits into clip. Designed to work with Command Poster strips

Downloads
20
Likes
3
Rating
0
P
PrintablesCharly BEGOOD

TP-Link GS105S Ethernet switch enclosure

This is my TP-Link GS105S Ethernet switch enclosure for my printer Amiga desk. I use 4 screws 3x8mm for fixing the top You can now fix your ethernet switch on a desk or on a wall or under a shelf.

Downloads
18
Likes
1
Rating
0
P
Printables3DPrintOtte

ESP32 ETH01 Ethernet PCB – SCR-CON-01 case

Behuizing voor ESP32 ETH01 en custom pcb van huizebruin.nl

Downloads
15
Likes
1
Rating
0
P
Printablesruebe5w

Fensterdurchführung Ethernet Ersatzgehäuse

Mir hat die Farbe nicht gefallen, deshalb habe ich ein eigenes Gehäuse designt. Einfach das alte Gehäuse abklipsen, neues dranstecken und zusammenkleben. Hier habe ich die Fensterdurchführung bezogen:…

Downloads
10
Likes
0
Rating
0
P
PrintablesOgre Ray

4Runner Small Switch on center - Ethernet RJ45 cable Adapter

I remixed this to fit a GMRS extension RJ45 (CAT5) cable that's routed from the arm rest through the panel...I resized this to fit the smaller port in the bottom, and added two cutouts: pass through for CAT5 Cable for install larger hole…

Downloads
8
Likes
1
Rating
0
P
Printablesguss67

Ethernet | RJ45 clip to secure/repair/fix broken tab

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…

Downloads
21,888
Likes
7,489
Rating
4.84
P
Printableskerngebiet

Ethernet Port Dust Cap/Cover - No Supports

Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…

Downloads
9,530
Likes
3,485
Rating
4.87
P
Printablesmfischer79

Ethernet (RJ45) Cover/Plug/Cap

Ethernet (RJ45) Port Dust Cover cap with grip for easy removal. Just added: New slimmer/narrow model for switches with closely spaced ports. Check out all other port covers: USB-A port cover -…

Downloads
4,581
Likes
404
Rating
4.8
P
PrintablesJohn K

RJ45 Ethernet Cable Clip Repair

These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…

Downloads
3,231
Likes
1,109
Rating
4.79
P
PrintablesGunter

RJ45 Ethernet Cable Connector Repair

This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…

Downloads
2,934
Likes
1,270
Rating
5
P
PrintablesCarletes359

Ethernet RJ45 repair fix with NO SUPPORTS

Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…

Downloads
2,145
Likes
414
Rating
4.53
P
PrintablesRaschmaschine

Parametric Cable Label / Tag holder for Ethernet, network, USB, PC, power line cables, etc.

This is my attempt for a universal cable labeling system. The label holder consists of a main part and a snapable cover. Labels can be stuck to the main part's flat surface or inserted into the cover if they are not sticky. Thus, using…

Downloads
1,971
Likes
527
Rating
4.94
P
Printablesflol3622

Ethernet cable label

3d printable ethernet cable label, print in one piece without support, compliant hinge system. I posted 3 sizes but add a comment if you wish another one, or use the fusion file I posted 3D PRINTING SETTINGS 0.12mm

Downloads
1,672
Likes
290
Rating
4.17
P
PrintablesColin

Ethernet Cable Termination/Straightener Tool

This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…

Downloads
1,544
Likes
158
Rating
4.9
P
PrintablesAlexMu

cable spool ethernet cable

for easy storing my network cable during traveling. It is for 20m cable length. i modified it for 10m as well see on Prusaprinters. https://www.prusaprinters.org/prints/47891-cable-spool-ethernet-cable-10m

Downloads
1,533
Likes
413
Rating
5
P
PrintablesIdea Prints

Ethernet Cable Runners

💻Ethernet Cable Runners💻 Nozzle 0.4mm Print 0.2mm Infill 50% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→ ALL COLLECTIONS info: 👤Account link to share it= idea-prints…

Downloads
1,224
Likes
253
Rating
4.83
P
PrintablesJensiboy

UTP/Ethernet Cable Wall Clip

Update: Added x2 and x1 clips Simple wall clip for UTP/ethernet cables reuploaded from Thingiverse , original design by Agustin_Pulido

Downloads
1,207
Likes
682
Rating
4.78
P
Printablesmathiaspl20

Slim RJ45 Ethernet Cap / Coupler/ Clip protector

Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…

Downloads
1,081
Likes
105
Rating
4.82
P
PrintablesAdelhied

Ethernet Cable Comb - Cat 5e (4, 6, 8)

This is a cable comb for Cat 5e Ethernet Cables. Looking for a Cat 6 variant of this model? <Click Here> ← To be updated

Downloads
1,057
Likes
155
Rating
5
P
PrintablesRob

Ethernet Clip

Cable organising clips for ethernet cables

Downloads
935
Likes
146
Rating
4.78
P
PrintablesPidge

Ethernet Spacers

Cable manage ethernet runs with some spacers I made. If you want more sizes just ask and I can upload them 👍 Currently Supported Sizes 5x2 5x2 -1 4x2 3x2 2x2 1x2 5x1 4x1 3x1 2x1

Downloads
855
Likes
306
Rating
4.91
P
PrintablesRower

RJ45 Ethernet Cable Lock

An anti-tamper lock for RJ45 Ethernet Cable connectors. I have cleaned up the original, made the hole smaller and cut off two of the corners to make it fit in more scenarios

Downloads
813
Likes
100
Rating
4.75
P
Printablesvindolin

RJ45 Ethernet Cable Clip Repair - parametric

Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…

Downloads
796
Likes
96
Rating
4.93
P
PrintablesAtko

Voron Skirt Keystone for USB/Ethernet

I needed access to a few more USB ports on my Voron 2.4. I already had the USB keystones on hand from Amazon https://www.amazon.com/gp/product/B07Z94HYFG?th=1 There is very little space inthe honeycomb to mount anything, so I designed…

Downloads
789
Likes
134
Rating
4.67
P
PrintablesMajorOCD

Ethernet Plug

This is an ethernet dummy plug to reserve or protect a network port. It is designed to be printed on its side for strength of the clip. I included a plain version and one with a clip protector. I also included a version with and without a…

Downloads
767
Likes
87
Rating
4.73
P
PrintablesBurf

HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter

Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…

Downloads
758
Likes
58
Rating
5
P
PrintablesKen Mills

Ethernet Cable Clips and Wall Cover

Ethernet cable clips and cover for routing along walls. Uses standard course drywall, #5 or similar screws. Versions for one through four cables are included. The cover was intended for routing the cables through a wall near a corner. One…

Downloads
731
Likes
104
Rating
5
P
PrintablesBasementLAB

10" Rack Mount Bracket Ethernet Switch TpLink 8 port

10" Rack Mount Bracket Ethernet Switch TpLink 8 port Flat version – Use this if you don’t have space issues between rack units (you can print this model horizontally); Standard version – Provides extra inter-unit clearance. Choose this if…

Downloads
729
Likes
78
Rating
5
P
Printablesk2thestank

Ethernet Cable Straightener

just print and screw the pieces together to help straighten the ethernet cables and makes it easier on your hands Can be used with a heat insert or tap out the 0.2mm 1st layer and a just use an 3m nut Hardware: M3x3.6 or 4mm heat insert…

Downloads
720
Likes
156
Rating
4.71
P
PrintablesMade 2 Fix

Ethernet Port Dust Cap/Cover - No Supports - Larger Base Remix

This is a remix of Ethernet Port Dust Cap/Cover - No Supports from kerngebiet with a larger base for easier printing and easier extraction of the cover. The initial design was a bit loose in my ethernet ports, therefore I added a 105%…

Downloads
679
Likes
71
Rating
4.88
P
PrintablesAlexMu

cable spool ethernet cable 10m

for easy storing my network cable during traveling. It is for 10m cable length. 20m variant https://www.prusaprinters.org/prints/27496-cable-spool-ethernet-cable

Downloads
666
Likes
84
Rating
4.86
P

RJ45 Keystone Ethernet Network Cable Mount

I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…

Downloads
597
Likes
86
Rating
5
P
PrintablesNiels Cor

RJ45 Ethernet port led light shield

Made a shield to fix the illumination from my wifi accesspoint led light. Tape didn't cover the light enough. Using a printed piece makes it removeable again. Best to print with some more infill and darker color to block the light.

Downloads
583
Likes
40
Rating
4.83
P
PrintablesJayson

Flat Ethernet Cable Spool

Designed to fit flat ethernet cables. Insert your cable into the center of the spool before snaping it together. coil the cable and push the free end through one of the hexagonal holes to hold the cable in place. Both ends of the cable…

Downloads
581
Likes
58
Rating
4.8
P
PrintablesKeen

2 Part Ethernet | RJ45 clip to secure/repair/fix broken tab

This is a problem that has plagued me for over 20 years. I was so pleased to see several 3D printed solutions. Unfortunately the original design by guss67 typically requires supports. To combat this there are designs that print in the…

Downloads
560
Likes
71
Rating
5
P
PrintableslegoNigel

Nintendo Switch Horizontal Angle Dock for Ethernet/OLED Switch

I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…

Downloads
546
Likes
95
Rating
5
P
Printableskonradmb

Ethernet LAN RJ45 cable plug locking clip repair

Tips: Set PLA temperature to 220℃, even 230℃. Consider using PETG - it's better suited for flexible joints. Try 0.12 mm layer height Scarf joint is required to prevent flexible tab breakage Print on the side with supports to achieve…

Downloads
520
Likes
69
Rating
5
P
PrintablesKenji

Ethernet (RJ-45) spear

I basically made this for pulling cables behind walls or above ceilings (original ethernet plug was from Dead End - Ethernet protector by SarahAlroe). You can stick a wire or piece of string through the loop and pull it through, hopefully…

Downloads
516
Likes
101
Rating
5
P
PrintablesJeffC

Ethernet Outlet Plate for Keystone Ethernet Coupler or Jack

These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…

Downloads
490
Likes
66
Rating
5
P
PrintablesJosuanbn

Ethernet Cable Straightener remix (print in place)

A print in place version of the Ethernet cable straightener. A second hole has been added to straight the wire pair, if desired. Printed in overture PLA Professional (PLA+) for best strength @0,20

Downloads
463
Likes
50
Rating
5
P
PrintablesPluto3301

Ethernet comb V2 + Screw Version

This is an updated version of my last cable comb . After some critiques from @ heyitsdubblea I went back to this and added screw holes so that you can screw this into a wall. I also knocked down the edges a bit with it. I also have…

Downloads
460
Likes
81
Rating
0
P
Printablesdoncoop

Raspberry Pi Zero W/WH Waveshare Ethernet POE Case

This is a flat pack case for the Raspberry Pi Zero sporting the waveshare POE ethernet and USB hat. HAT in question : Waveshare POE ethernet Benefit of the case: Flat pack design Maximum airflow Has space to have a Pi Zero with headers…

Downloads
445
Likes
47
Rating
5
P
PrintablesDominate4life

Cable Organizer with Ethernet Cap

Wanted something like the original design but something to protect Ethernet endcaps. Also made the gap to hold the cable inside the clip better.

Downloads
421
Likes
93
Rating
5
P
PrintablesVujko Klej

Starlink ethernet adapter cover

This cover created to protect Ethernet connector from dirt and humidity when using in field. Created for Ukrainian Army.

Downloads
418
Likes
55
Rating
5
P
PrintablesMZA

Ethernet RJ45 keystone socket wall plate

just a simple single port wall plate for ethernet with a RJ 45 keystone

Downloads
416
Likes
25
Rating
5
P
PrintablesOmegaStar16

Elitedesk 800 G6 Flex Port 2 Ethernet Bracket

This is a bracket for the hp elitedesk 800 g6 (DM/1L PC model) flex port 2. Usually a discrete GPU or serial add-on use this cutout in the chassis but I wanted a bracket for an ethernet to m.2 (A+E Key) card since my WiFi slot wasn't…

Downloads
412
Likes
28
Rating
5
P
PrintablesMarc R.

ESP Thread Border Router Case (Ethernet)

A case for the ESP Thread Border Router with attached Ethernet daugther board. The Border Router is developed by Espressif and consits of an ESP32-S3 and ESP32-H2 SoC. It can serve as a Thread Border Router using the Openthread Border…

Downloads
399
Likes
31
Rating
4.8
P
Printablesschmid01

HP EliteDesk G4 Bracket for Ethernet Port

This is a Remix of HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter von Burf | Kostenloses STL-Modell herunterladen | Printables.com from Burf. Please see his Model for Details. I could mount my Bracket without modification of the…

Downloads
390
Likes
21
Rating
0

STM32 Nucleo-144 Case with Ethernet Cutout

A minimal, protective half-case for the STM32 Nucleo-144 development boards, with heat set inserts and screws.

Downloads
387
Likes
12
Rating
5
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock for sideways print

An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…

Downloads
379
Likes
28
Rating
5
P
PrintablesGeneralDon

Ethernet Plug with Pull Tab

Dust shield or block-off for female ethernet ports, includes a pull tab for easy removal. Remixed from a model which had no pull tab to make removal more difficult for unwanted users, I added the pull tab to make it easy to remove. I…

Downloads
375
Likes
45
Rating
4.43
P
PrintablesDario A. R.

Stealthy Ethernet Cable Clips

Print them in the supplied orientation. Using a 0.6 mm nozzle, you can get away with a single perimeter and no infill. They are meant to be attached with tesa powerstrips, command strips, or anything similar. If you want to print…

Downloads
371
Likes
58
Rating
5
P
PrintablesJan-E.de

Mounting Bracket for Ethernet/SFP Media Converter in 19" or 10" Rack

This is a bracket to mount a network media converter to the rail in a network cabinet/rack. As it is just fixed on one side, it fits 19" and 10" racks equally well. There are two holes for the cable inlet on the back to allow the…

Downloads
360
Likes
60
Rating
5
P
PrintablesOld Lady

LAN- Kabel Clip, Ethernet Cable Clip

Einen ähnlichen Clip gibt es hier schon, der bei mir aber immer wieder gebrochen ist, egal, ob ich PLA oder PETG verwendet habe. Deshalb habe ich einen ähnlichen kreiert, der allerdings aus 2 Teilen besteht, sodass ich die Druckrichtung…

Downloads
356
Likes
37
Rating
4
P
PrintablesDouglas Hale

HORACO 8 Port 2.5GbE and 10GbE Ethernet Switch rack mount bracket -Mokerlink Sodola Nicgiga

Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…

Downloads
345
Likes
32
Rating
0
P
Printablespoprhythm

Cable Tags - Lightning, USB, Ethernet, Audio, Power

I was asked to make some tags for charging cables for use by elementary school age kids. After not finding any that looked durable enough, I designed these to withstand heavy every day usage. There are several different sizes, use a…

Downloads
339
Likes
62
Rating
5
P
PrintablesMitch Fraser

RJ45 / Ethernet Port Blocker - Remix

We have switches / PLC's at work that occasionally get relocated. Every now and then, the wrong un-configured ports get used to re-connect these devices. These aren't really to stop people from pulling them out if they wanted to with some…

Downloads
339
Likes
29
Rating
4.8
P
PrintablesBen Waywood

Ethernet network cable numbered tag

Easily identify cables by placing the same number at each end of a cable, you can place multiple on each end if needed for 2 or 3-digit numbers

Downloads
336
Likes
53
Rating
0
P
Printablesfritolays

HP G1-G5 Flex IO v1 Ethernet NIC Bracket

HP G1, G2, G3, G4, G5 EliteDesk/ProDesk Flex IO v1 Ethernet NIC Bracket

Downloads
328
Likes
24
Rating
5
P
PrintablesCupcake155

Dual Ethernet Cable Clamp

Here's a basic cable clamp for securing a pair of cables to a stud (or whatever you want to screw it in to). The screw hole was intended to fit a drywall screw, but other's should fit fine. I made this for helping-square up ethernet…

Downloads
325
Likes
51
Rating
4.89
P
PrintablesAndersV209

Arduino uno ethernet case

this is a cusom version of http://www.thingiverse.com/thing:626368 where i removed alot of the holes and the mounting, but i still have the stl with mouning and some of the holes but not all. it took around 5 hours to print (1 hour for…

Downloads
313
Likes
14
Rating
5

Ethernet Plug

This is version 28 of my universal ethernet plug that I designed for work Design features: Friction mount No supports required Made with PLA 0.2mm layer thickness Average print time of 5-10min Carefully located pressure points to avoid…

Downloads
309
Likes
45
Rating
5
P
PrintablesJohnnyBert

Ethernet RJ45 LED Blocker

A NAS and a switch tend to illuminate my bedroom due to unfortunate (but unchangeable) placement. I made a very slim RJ45 LED plug cover, which slides on easily and does not come off on its own when unplugging cables. Works also with…

Downloads
303
Likes
21
Rating
5
P
PrintablesTreoWayne

Dell Wyse 5070 second LAN Ethernet adapter Intel i210

The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…

Downloads
300
Likes
16
Rating
5
P
PrintablesCDavid

Ethernet RJ45 - Fabrication Tool

I designed this tool, to assist in fabricating ethernet cables. It maintains wire formation, in preparation for insertion into the RJ45 Jack. It also assists in precisely cutting wires to (13mm) the correct length.. Strip off about an…

Downloads
296
Likes
36
Rating
5
P
PrintablesOld Lady

Ethernet Cable Clip 2 Pcs pluggable

Das Modell ist auch 2-teilig, aber ohne Kleber einfach zusammensteckbar

Downloads
291
Likes
39
Rating
4.57
P
PrintablesiMars

Case for WT32-ETH01 (SlimmeLezer esp32 + ethernet)

Best fit is to print it on 0.2mm (standard settings for either Prusa, Bambu, Voron or other printer). 3mf file is including text for printint in multiple color.

Downloads
287
Likes
11
Rating
5
P
PrintablesDeltaken

cable spool ethernet +20m

Remake for longer ethernet cables +20m (flat or round) Diameter stays the same, i made it wider. Together with the clip.

Downloads
286
Likes
32
Rating
5
P
PrintablesDakaar

Nailless Flat cat7 Ethernet Cable Clip for Cables 7.5x2.5mm

A cable clip for attaching flat ethernet cables to walls/skirting boards. I wanted some something to attach a new cable snaking through the house, to the wall. i didn't want to use nails so i designed this to use 10x10mm double sided…

Downloads
283
Likes
35
Rating
5
P
PrintableslayerCraft

Ethernet switch holder

Required a frame to mount the 8-port Ethernet switch under a stand. There are other similar models around but I experience occasional bouts of not-invented-here syndrome. There is g-code attached is you happen to be using PETG. This will…

Downloads
279
Likes
38
Rating
4
P
Printablestaow
Downloads
275
Likes
38
Rating
5
P
PrintablesJosuanbn

Ethernet cable runner for 24 port patch panel (numbered)

Designed to guide 24 ethernet Cat 6 cables to a 24 ports patch panel. The holes are numbered to match the port number (for future actions). Also, you can found a version Switch numbered (1-3-5 ...) Around the piece you have a guide to…

Downloads
269
Likes
63
Rating
0
P
PrintablesAresROC

RJ45 Ethernet Network Switch LED Light Shield Cover

RJ45 Ethernet Network Switch LED Light Shield Cover Print with any material

Downloads
257
Likes
16
Rating
5
P
PrintablesMike McDonald

Starlink Ethernet Mount - Screwed

Just a little mount to hold the starlink ethernet adapter. It's a snug fit and the cable holds it too. Easily printed with the largest surface on the bed and I've mainly made them out of PLA on my Prusa mini in draft mode

Downloads
256
Likes
53
Rating
0

HP EliteDesk/ProDesk Mini Flex 2 2.5Gb Ethernet Bracket

This works with HP EliteDesk and ProDesk G6 (and possibly G9?) Mini systems. It replaces the blank panel on the Flex IO 2 Port and let's you mount an ethernet adapter. It might work with other Ethernet adapters, but I've only tested it…

Downloads
254
Likes
44
Rating
5
P
Printableskbob

Under-shelf mount for Netgear 8-port Ethernet switch

This bracket holds a Netgear GS308 Ethernet switch to the underside of a shelf. Uses four wood screws to attach. Print instructions I used PETG. PLA would probably work too. Print settings are not critical -- it didn't need support or…

Downloads
253
Likes
51
Rating
4.67
P
PrintablesManelTo

tags / labels for ethernet cable (with freecad files)

Printed with PETG filament with 0.25 nozzle, 10% infill (it's more flexible). Look at the photo of how it is best to place the pieces on the bed. I have included the entire alphabet, numbers, and one piece without markings. I have also…

Downloads
248
Likes
48
Rating
5
P
PrintablesJason Brain

Pi Zero 2W Waveshare Ethernet / USB HUB HAT (B) case with heatsink Cover

Print using Supports (Everywhere) then pick open the gaps for the ports. Designed For: PI Zero 2W ETH USB Hub Hat (b) SKU: 20416 Part Number: ETH/USB HUB HAT (B) Brand: Waveshare Dedicated Aluminum Heatsink for Raspberry Pi Zero Series,…

Downloads
248
Likes
33
Rating
0
P
PrintablesIAM007

Ethernet Cable Management - Wall Tie

Guide for 4 Ethernet cables mounted to the wall.

Downloads
233
Likes
30
Rating
5
P
Printableswingsone

Ethernet Sleeve/Boot and Strain Relief

This is meant to be printed in a flexible filament and must be put on before crimping the cable. Tested with CAT5 cable. The project page with more information is here:…

Downloads
232
Likes
40
Rating
3
P
PrintablesLawrence H

Ethernet Cable Clip

Simple ethernet/CAT5 cable clip. Wanted a clip that I could mount and then come back and run my cable. It's frustrating when holding a cable, a clip, and a screwdriver.

Downloads
230
Likes
34
Rating
5
P
PrintablesBen

2.5G Ethernet adapter bracket for Optiplex Micro 7050

Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…

Downloads
228
Likes
25
Rating
5
P
PrintablesAstronomicon

Ethernet Wall Mount

My ethernet cable couldn't reach my computer without dragging on the floor, so I designed this to neatly route it along the door frame instead.

Downloads
222
Likes
35
Rating
5
P
PrintablesMarco Frazão

Flsun Speeder Pad - Ethernet Ed.

I’ve upgraded my Flsun SpeederPad with an RJ45 connector for ethernet access. Works perfectly, just need to solder a PCB connector. Ive designed a new case to allow access to the new RJ45 and also to the 4th USB port, USB OTG and 3.5…

Downloads
221
Likes
33
Rating
5
P
PrintablesPaul Mullen

Arduino Mega Project Box with Ethernet Board

My version of a project box for Arduino Mega that includes an ethernet board and one custom project board on top.

Downloads
221
Likes
14
Rating
5
P
PrintablesDDD Projects

Ethernet Wire Management RJ45

A simple wire management solution for securing network cables. It hold 14 ethernet cables and has multiple holes for mounting inside a server rack or under the desk.

Downloads
221
Likes
38
Rating
0
P
Printableslucasyas

10" rack mount for Horaco 2.5Gb ethernet switch

I wanted a cheap 2.5Gb ethernet switch and found one on aliexpress. As with all equipment like that, there's no rack mount included so I had to do my own (rack isn't ready yet, but I'm preparing my devices). Fit is tight, so you even…

Downloads
218
Likes
19
Rating
5
P
PrintablesCromFr

Hinged Cable Clip for 8 cables (ethernet)

Long version that can hold up to 8 ethernet cables (4-7mm), and cables stays inside the slots when the clip is opened

Downloads
216
Likes
21
Rating
5