41 models
A wall mount for the Ryobi 40V leafblower that contains a clip/slot mount (as seen in the pictures). This can vary between leafblower models. This was remixed from the referenced model to make it sturdily wall mountable. This is a…
Es braucht noch ein M6 x30 mm Sechskantschraube und einen M6 Gewindeeinsatz. Schleifpapier, das dicker ist als 0,5 mm wird schwer hineingehen, da muss man nach schleifen.
Wall mount for the Milwaukee M18 MBL18 Blower Inspired by https://www.printables.com/model/580193-milwaukee-m18-blower-wall-mount-2724 but did not fit the Blower Model i had. Other mounts in photos M18 Hedge Trimmer…
cartridge for the Fbals SD mapper V2 board, very basic, but it does its job
A simple wall mount to hang the Makita Leafblower DUB362 by using an existing hole.
The leafblower got noticeable better for use on stones under the grass after a long winter. Updated with better overhang and locking so it won't blow off. Mounted on mine and testet with no tape, did not fall off. Updated 1mm tighter lock…
This is just some models I made from a request. Haven't printed them yet.
schleifblock für Schleifpapier 75x457mm
The valve can be printed in one piece. This makes it easier for children to inflate balloons and let the air out again. This allows balloons to be reused. With PLA there will be a slight leak, perhaps with softer materials such as TPU it…
Created a smaller base pipe-nozzle combo for cleaning snow off from my car. Easy to throw it in the back of the car, doesn't take nearly as much room as with the original parts.
Print it with any material (needs to be a bit flexible) and settings that you feel comfortable with. 2 x M6 screw and nut required for assembly.
Just wanted to make Magic the Gathering's fan favorite homunculus, Fblthp. Just a quick model. Fblthp has no idea how he got here. If you want to help me keep making free models or to tell me what I should make next please check out my…
As there's no DIN-Rail actuator available which support power measurement, HMIP-DRSI1 is far too expensive for its little set of features and there's also no single channel shutter actuator, I needed to use the flush-mounted actuators in…
Ich habe kurzerhand einen kleinen Schleifblock für 40 mm breites Schleifpapier entworfen. Es gibt genügend Schleifblöcke hier auf thingiverse, jedoch steht nicht immer die Papierbreite dabei. Also: Dieser Schleifblock ist für 40 mm…
Mount for the accessories: DeWalt DCV100 Leafblower accessories wall mount by XiteHosting | Download free STL model | Printables.com
Mit einer normalen Pumpe ein aufblasbares Zelt aufpumpen. You can inflate a inflatable tent with a normal pump.
3 Eck Schleifblock für Klett-Schleif-Dreiecke Wird auf der Unterseite mit selbstklebendem Klett versehen. Gedruckt, Mat: PLA (PETG, ABS oder PC, auch denkbar) Füllung 15-50% Gedruckt. Getestet, funktioniert gut.
I know there are already a number of sanding blocks here, but this one is relatively small (105 x 56mm). The sandpaper sheet that I know of measures 28 x 23 cm. I designed the sanding block so that 5.6 cm wide strips are used, so you get…
Designed on F360, sliced with Prusaslicer. I used Prusaslicer modifiers for 30% infill in the arms and 15% in the backplate above the arms. I also increased the infill to 100% around the screw holes for more strength. It's mounted into a…
Inspired by @DrTob's model (printables.com/model/528090), I discovered that the Bosch Professional and DIY models do not use the same housing. So I started from scratch and came up with this solution to mount the leaf blower.
Replacement hinge bolts bushings for Tern Link B7/C3i/C7i/C7(and all other FBL 2 Gen 1 and OCL Gen 2 frames). Hinge bolts are a known weak point on most 20" Tern folding bikes from 2013-2017 (ish). The original coated steel (early models)…
Am besten wird empfohlen PETG-CF wegen der Langlebigkeit und Stabilität ABS oder ASA gehen auch. INFILL EMPFOLEN ZWISCHEN 40%-60%
We use a Makita DUM604 grass shear and had a little problem. When trimming the hedge, cuttings enter the mechanics of the machine and stay there until removed via brush or hook. That meant an extra 15min after each use just for cleaning.…
this is a leaf blower attachment for the 20v version. IT IS A WORK IN PROGRESS. i have not printed it yet and have not sliced or added supports
If you mount the holes horizontally or vertically the accessory will be aligned. I mounted it in an angle to fit the tight space I have left. For a wall mount for the leaf blower itself: DeWalt DCV100 Leafblower Wall Mount by XiteHosting…
Gedruckt mit extruder PLA NX2, Hebel Achse und die einlegeklötzte sind mit 5 Wänden gedruckt.
Afblijven tekst. Geprint op 99,7% grootte maar je moet kijken wat werkt.
Custom wall mount for the Makita DUB185 leaf blower . Designed for easy 3D printing with. Perfect solution to keep your workshop or garage organized. The mount includes four screw holes for universal use, but only two screws (Ø4–5 mm) are…
I printed this part out of PETG with 4-5 walls and 10% infill basically prints the walls solid. I had to print these in two parts as they are too big for my printer. The mating parts have an interference fit that okay, not perfect, but…
Einfaches Modell zum Aufblasen von sämtlichem Pool Zubehör. Passt in jede Luftpumpe für Schraderventile
Endlich sitzt der Aufblasadapter, des Bosch Akku Nass- und Trockensaugers AdvancedVac 18V-8, sicher und fällt nicht ständig raus. Gedruckt mit PLA+, mit 15% Infill
This adaptater can be fitted to a bag using tie warp and a bit of sewing. We use a bag made to protect clothe that we bougth second hand. I have a black and decker leafblower and it does fit very well, let me know in the comment if it…
I wanted to build a little hovercraft for fun and needed some way to clamp two of them to a bit of ply. This design provides such a design. I've added a slot for TPU to provide a tight fit. You can print this with no supports, but I…
Inazuma ITF-50 Bio Kompakt MK V Überlaufbleche für gepumpte Version. Falls der Filter gepumpt aufgestellt wird, sind zwingend diese Überlaufbleche zu installieren, da sonst das bei blockierter Trommel das Wasser aus der Schmutzkammer…
A thick hook with a mounting plate, 2 screw positions (5mm diameter). The holes allow for some movement in one direction to make alignment easier. I made it to hang up an electric leaf blower (mine is ~3kg), but it can be used for other…
I printed this part out of PETG with 4-5 walls and 10% infill basically prints the walls solid. I had to print these in two parts as they are too big for my printer. The mating parts have an interference fit that okay, not perfect, but…
As there's no DIN-Rail actuator available which support power measurement, HMIP-DRSI1 is far too expensive for its little set of features and there's also no single channel shutter actuator, I needed to use the flush-mounted actuators in…
Wall mount for the Milwaukee M18 M18FBLG30 Blower Other mounts in photos M18 Hedge Trimmer https://www.printables.com/model/938751-milwaukee-m18-hedge-trimmer-wall-mount M18 Power Head…
Wall mount for the Milwaukee M18 M18FBLG30 Blower Other mounts in photos M18 Hedge Trimmer https://www.printables.com/model/938751-milwaukee-m18-hedge-trimmer-wall-mount M18 Power Head…
