980 models
It's a story. A few weeks ago we were in Paris and everywhere you could buy expensive models of the Eiffel Tower and some even flashed. So I promised the family that I would print it for them and it would be lit. :) Since I used the add…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Carved Egg with 4 Saints.
Print approx. €5.74–€7.01 excl. taxPreliminary estimate for one variant
Carved Pysanka With Four Saints. Saints Volodymyr the Great Saints Anthony of Kiev Saints Cyril Saint Michael
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
Wall art: Butterfly and lily (four colours)
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Vous pouvez le remplir avec une poudre anti fourmis du commerce. Sinon vous préparez un sirop avec du sucre et du sel en quantité égale. Le sucre les attire et le sel les tue.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Set of four coasters with a rose motif (two colours)
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Wall art / coaster / fan: Rooster (two colours / four colours) You may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model | Printables.com Important: This fan is 2 mm thick, so you need handle…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
240x30x3mm 240x20x3mm 200x30x3mm 200x20x3mm
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Best printed in vase mode with no bottom layers. Invertible four leaf clover. Present as the inverted puffer fish shape to a friend. They will be surprised when it snaps into a four-leaf clover right in front of them. Other spiralized…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Podšálek ve tvaru čtyřlístku. A coaster in the shape of a four-leaf clover.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Protected magnetic keys have asymmetric key ring holes and are quite long, so I made this foldable key holder especially for them. It holds four magnetic keys and both halves are connected with a M3 screw/nut. Since the keys do not rest…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have a Mug for you, a mug with a four-leaf clover. It is also suitable for cans, both large and small. The material I used is PLA/PETG Basic No need to use supports If you are interested in my work, the links are here:…
Print approx. €11.01–€13.46 excl. taxPreliminary estimate for one variant
voici un système de fixation pour bandeau de four , les clips sont à imprimer dans l'orientation initial pour assurer une meilleur résistance. il faudra rajouter 4 vis M4 le gabarit sert à (voir photos): - positionner les tubes pour les…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
Happy piggy (two colours, four colours) 20 cm, 10 cm, 4 cm keychain
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Generally, bosses for tapping screws installed on the top surface take an overhang shape. Traditionally, to alleviate the overhang, it was necessary to install supports or model the bottom of the boss with a tapered shape. However, these…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Korálky ve tvaru Gonggi čtyřlístku. Beads in the shape of a Gonggi four-leaf clover.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Happy piggy - Happy family sign (four colours) 20 cm
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
I love everything about the Dummy 13. I am an official fanboy. So when I discovered about the Dummy 13, I decided to build expansion kits for this awesome model. I will not say my models are an upgrade kit because the Dummy 13 is the OG.…
🔥 Cover up that boring lighter! 🔥 Always have a flame on hand with four different styles to match your vibe or your mood! If you don't want to add a lighter to your janitor-sized wad of keys, then I have just the thing for you! I have…
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
Bring the mighty Tairn to life with this Funko-inspired dragon figurine from Rebecca Yarros’ Fourth Wing. Designed in an adorable yet fierce style, this collectible features Tairn’s iconic dark scales, golden details, and powerful wings.…
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
There are three variants of this bookmark; one .3mf file for printing with an AMS/Multimaterial system, one with Andarna raised up, allowing for a color-swap, and one with Andarna cut-out for a single-color only print. Tairn's tail can be…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
🐾 Four Cats Wall Decoration Bring a touch of playful charm to your home with this silhouette-style wall art featuring four whimsical cats sitting side by side. Each feline has its own personality — from curious tails to expressive eyes —…
Fourth wing dragon earrings I designed. .2mm Nozzle needed for detail of the second dragon. Print pauses so the filament can be swapped out manually. I also printed this on the rainbow PEY plate so the back can be nice and sparkly too.…
Imán personalizado de los dragones de la protagonista de Alas de Sangre de Rebecca Yarros. Se necesitan 3 imanes de 8mmX1mm que están posicionados uno en cada ala y uno en la terminación de la cola del dragón. Diseño realizado a partir de…
Just adapted the four arm mod to the Type-F frame. It also uses my pinned clavicle mod.
I have fond childhood memories of eating Bomb Pops with my family at our Fourth of July celebrations. I hope these strike up a warm and fuzzy nostalgic feeling for you as well. The earrings on the left are the standard size model and…
Here's a Power 4 game with spiral pieces that I designed in Fusion 360 (step and f3d files supplied). The base is magnetized to the board. Tip 1. I suggest you print the tray test piece and a piece to check tolerances and set your…
Four leaf clover keychain to celebrate St. Patrick's day. Scale however you wish.
This modern holder is ideal for makeup brushes, as well as pens, brushes, and other office supplies. It's versatile, making it ideal for a variety of uses. With its four compartments, it offers plenty of space for your essentials. The…
This model is compatible with the lego system.
Update 25.06.2023: 3 models added I also had tried different cutouts in order to save some filemant. Therefore I had created three different models: The first one has larger cutouts for faster to printing (3 hours instead of 4). It has…
its a four pin connector used to connect four honey comb pads
This is a 3D modeled body cap for the Micro Four Thirds Platform. This design features a rotation stop so you cannot over turn the cap. There is also a position marker on the front of the lens cap, like the genuine body caps.
It is a foldable four wins. the display can be plugged together and glued witTangit PVC-U If necessary.
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. When downloading, do not forget that you do not need to click Download All, because in…
This is a model for a bog-standard 4-inch outdoor electrical junction box. It should work great for things like motion-sensing lights (what I'm personally using it for) overhead lighting fixtures, and whatever else you use round…
COBOT: Four servo legs and distance sensor robot I present my latest project, COBOT, a robot that can move thanks to 4 servo motors and get the distance to obstacles with the HC-SR04 distance sensor. This is an ongoing project I have made…
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
I have devices that like to drain batteries and then suffer leakage, (and one AAA device in particular), so I like to keep the batteries outside the device. Here's a case aiming for minimal size and reduced material, while maintaining…
Just a pack of four non-traditional garden gnomes . You can scale them up as you want, but i do not recommend significantly reducing the size, as this could lead to errors in wall thickness. My print settings(PLA): 0.16mm layers, 2 walls,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
This is my take on TI4 organization including Prophecy of Kings. As with all my inserts, my goal is to minimize setup and teardown as much as possible while keeping the contents snug and protected from jostling. All files were printed…
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. When downloading, do not forget that you do not need to click Download All, because in…
🔵 Flexible Caterpillar 🔵 I created 4 versions (8,10,12,14) Versions 8 and 14 are in the video and picture. Number means the number of parts from which it is formed. I do not recommend TXT for this print . PEI is sure that it model will…
This is a replica of the four piston bleed block that TRP sells. It is intended to be used with TRP DH-R Evo and TRP Trail Evo brakes but may work with Shimano four piston brakes as well since they use the same pads. Printing Instructions…
Congratulations, you've found a four-leaf clover! 🥳 Two STL versions, with a groove along the contour of each leaf and without. Three profiles, the first two are the same STL, in the first profile the fuzzy skin is enabled. Easy to print,…
Wishing you good work and fun I would be happy to receive feedback and photos of the make. Thanks
Models for the two main dragons Tairn and Andarna in The Empyrean series of books, the first of which is Fourth Wing. There are 2 versions of both dragons, with and without a minny dragon cutout in the middle. Tairn has his morningstar…
A backpack for arms made for the Atelidae.
Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
A curvy designed bowl with four compartments. Ideal for snacks... The standard dimensions are 200mm x 65mm. It can be scaled as desired. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
Qui n'a jamais rêvé d'avoir quatre bras ? Dummy a la chance d'en avoir quatre, en plus des deux qu'il avait déjà, petit veinard. Grâce à cet accessoire de luxe, Dummy pourra réaliser ses activités favorites plus facilement et rapidement.…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Update July 28th, 2020: Added a smaller version scaled at 75% for a quicker print time and to save filament, it's less than 5 grams. It's big enough to determine cooling quality but the normal version is a little easier to see the…
Beim lesen die nervigen Seiten fetshalten!
Cookie cutters
The design is based on the Longworth Chuck, it's a great movement and normally used for Woodturning. The chuck's original designer sadly died after showing the design at a club meeting. The late Mr. Longworth of the Hunter Valley…
The Death Star and The Millennium Falcon as simple Line Art earrings. I only made them with a 0.25mm nozzle so far. So I'm not entirely sure how they'll do with a standard 0.4mm nozzle. If you do, please let me know how it went.
Commercial use is NOT allowed for this model
Hey everyone! Another day, another Halloween decoration! This time, I decided to create a spooky set of pumpkin designs with witches, bats, cats, and haunted houses. I wanted each piece to have its own eerie charm while fitting perfectly…
Created using an image-to-3D tool and minor manual adjustments: I used https://makerworld.com/cs/makerlab as a image-to-3D tool for this Photo used for generating:…
A 6cm diameter four colour globe with relief including a stand. If you are using PrusaSlicer, by far the easiest way to print this is to use the two included 3mf files. Otherwise, check out the picture of the parts: that's what you want…
A 3D printed take on the classic game Four-in-a-Row (AKA Captain's Mistress or Connect Four). Game tokens for this model are compatible with Zaggrivation - a strategy game for up to four players. How to Play Two players take turns adding…
This model was made at the request of the astronomical observatory of Oro Verde, belonging to the AEA (Asociación Entrerriana de Astronomía). The Soviet spacecraft was scheduled to be deorbited in the Pacific Ocean, but after an…
Four Fit Tray-packing puzzle by Stewart Coffin (STC #217) Fit all four pieces into the rectangular opening. Four Fit is an absolute classic, and is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first,…
Made a quick little four leafed clover shirt pin. It is designed to fit a paperclip into the back as seen in photo to attach to a shirt collar, hat belt, or anything else you'd like.
This is the V2 version with the longest run time as four 185x235mm builds so will fit onto most 200x250mm printers. Category: Hobby
Here is a durable case for storing 4 AA batteries. Friction fit lid holds batteries safe and secure in a gear bag, backpack, or wherever you choose to stash it. See my designs for additional AA, AAA, and C battery boxes. This print is in…
What would fit better than using 3D printing to print a 3D game? This game is a lot of fun and also is perfect as a gift! tl;dr This design is very easy to print: pick colors of your choice, download the designs and fire up the printer!…
This is designed so that you can fold it down for storage, and when you're ready to play, you just place the game board in the slots in the base to keep it standing. The way the board sits also gives a handy way to separate the game…
We have made a four-stroke engine for you. It is suitable as a learning tool for all students. To assemble it you will only need small screws to connect the piston to the crank. Print with the support.…
A four part version of the Ninjago golden sword weapon with a 2-peg solution for putting the pieces together. Printed on a Bambu A1.
Baseball display stand based on a four sided pyramid. Show off that "No Hitter" game ball or a great autograph you acquired. Posting photos of your printed work with the baseball would be much appreciated. Check out my other baseball…
Four-Leaf Clover Keychain – A Lucky Last-Minute Gift! Forgot to grab a gift? No worries, ya gobshite - this Four-Leaf Clover Keychain is here to save your skin! Quick to print and easy to carry, this lucky charm is perfect for bringing a…
This model is compatible with the lego system.
This is a cookie cutter in the shape of a four leaf clover. For St. Patrick's Day!
Perfect collection to print metallic or cartoonish. These are the characters included: - CELL_FASE 1 - CELL JRS - JOHAN - SAIBAN MAN - TRUNKS
This model is compatible with the lego system.
Just a simple 4 leaf clover keychain to always have a little luck with you :)
Fun Connect Four game to play with family and friends.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Model prints at about 220 mm x 230mm. You will need a printer that can accommodate the size.
This is a remix for 4 Controllers and a logo
This is a model of the standard Micro Four Thirds lens mount. This is the male portion of the mount that is attached to the rear of a Micro Four Thirds lens. Dimensions were taken from the lumix G Vario 45-200mm f4-5.6 lens mount,…
YouTube video showing how to assemble this eye: Bring your characters, robots, and props to life with this fully 3D-printable 46 mm animatronic eye assembly. Designed for hobbyists, droid builders, and animatronic creators, this compact…
The emblem featured in the publicity for the 2025 film The Fantastic Four - First Steps.
This is a four-position screwdriver holder I designed for the French Cleat system on my workbench. My cleats are cut on 45° angles and are 19mm x 19mm. The screwdriver shaft holes on this design are 6.5mm diameter. I realize French cleat…
This thing sounds awesome. I need to print it in two parts on the MK4S, but it works well. The whistle prints nicely when you split it and glue it together, and it sounds great. I even tried printing it without infill, and that works too.…
