7,733 models
'Safe from the Rain' is a string artwork with a space under the umbrella to slot a figurine of your choice. It prints without supports Print at 0.2mm layer height and if using Bambu Studio set your wall generator to Arachne. You can…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
This is latest model I have created. This detailed AT-AT from Star Wars has 15 points of articulation and show cases the interior of the machine. It consists of almost 70 parts and can be assembled without glue. The head and body had a M5…
Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant
Hello, Today I have Demogorgon for you - a monster from the movie Stranger Things. It is a really faithful copy of the famous monster from the movie. It is also suitable for coloring, or for a diorama with the theme of the upside down…
Print approx. €8.57–€10.48 excl. taxPreliminary estimate for one variant
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
All information can be found here: (Parts, details, etc.) Free Plans 3-D Printed P51D RC Airplane!!! DIY! Make sure to subscribe!!!!! READ! There is a 3mf file at the top, that is saved as a project, so it has stl's inside of it that you…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Here is the Minecraft Sword that was featured in A Minecraft Movie, ready for you to create, explore, and survive! Printing Use decent infill and wall perimeters for good durability, and print accordingly for best physical structure.…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Do Avocado float your boat? This quick-to-print no support design can help you grow your Avocado seed without much intervention. Forgot to water the plants? No worries about this self-watering solution. All you gotta do is position the…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
daffy duck looney toons
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
When you wash your car with a bucket of soapy water, the dirt that comes off the car ends up in that bucket. This grit guard captures that dirt and keeps it from getting back on your sponge and scratching the paint. It was inspired by the…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for one variant
Anya Forger From Spy Family. Anya2.3mf and .obj are both updated with thicker dress and (hopefully) no holes. I will leave the old ones up for a bit. Please use Anya2 models.
Print approx. €15.67–€19.15 excl. taxPreliminary estimate for one variant
Made this for my daughter. It's the character Calcifer from the movie “Howl's Moving Castle” NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Bring Kenny McCormick from South Park to life with your 3D printer! Besides the one-piece model, I've attached STLs of Kenny cut into two pieces, which can be printed without supports. If you print Kenny in one piece some supports are…
Print approx. €6.20–€7.57 excl. taxPreliminary estimate for one variant
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
12-03-25 Update: I had a request to make a version of the sword with a hole included in the blade to slot a ½" (1.27cm) wooden dowel inside for strength at conventions so those should be in the files section. Mihawk's legendary sword Yoru…
Print approx. €4.04–€4.93 excl. taxPreliminary estimate for one variant
Looks like the Rusty Bucket from Ben 10 but it's actually Eagle 5 from a Star Wars parody - Spaceballs! Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
Poro from the game League of Legends - Aram I laso made an pad under the poro and a little cookie
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Isaac. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Simple model of EVE, easy to print. No supports. For the thread to work well, must be printed at 0.20mm height. Other parts of the body do not require anything special. Can be increased or decreased by percentage. Printer setup: Nozzle…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Alien from the Disney Pixar Toy Story animated movies Single extruder multi-color print: First layer: White Second layer: Yellow Third layer: Orange Fourth layer: Purple Fifth layer: Light Blue Sixth layer: Green Seventh layer: Dark Blue…
Print approx. €4.42–€5.41 excl. taxPreliminary estimate for one variant
I like the honeycomb wall from the guy im remixing but it's missing parts, so here are the missing parts, enjoy
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Stan Smith From American Dad.
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for one variant
Hi there, this is a holder for Samsung SSD PM883 from 3,5" to 2,5". See the Dimensions on the Pictures, maybe it fits for other SSD too. Filament: Prusament PETG Orange Supports: Yes Layer height: 0,2mm Dimensions: Look at Pictures In the…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
Krystal from Star Fox
Print approx. €9.30–€11.36 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €19.18–€23.44 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €22.17–€27.10 excl. taxPreliminary estimate for one variant
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Lost. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
I designed these boats to better hold the meeples in Survive: Escape from Atlantis! When moving the original boats during games, we found that the meeples inside would often fall out. In Survive , the point value is indicated on the…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This key turner is a useful assistive device for people with arthritis or missing digits to operate their keys. Users loop their finger through the hole and twist to lock and unlock doors with minimal wrist movement. Print instructions…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Keep your inhaler from accidentally going off. Save money and waste less with these guards. Cutouts allow you to depress canister without removing the cap. Bonus points, it keeps your inhaler clean.
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
This is my design of dish that is ventilated from below. Objects placed in this dish dry fast, as there is an air flow possible from all sides. How to Print the Dish Print the dish with the flat bottom on the print bed. In order to get…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
Reupload of my brain in 1:1 size for prusa for schools account. more details later
Print approx. €43.51–€53.18 excl. taxPreliminary estimate for one variant
3D printable model of two Gangle's masks. Printing instructions Everything is configured in the 3MF file, but I highly recommend at least adding more perimetres , because you'll be doing a load of sanding. And for best result supports are…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
I made an adapter to allow attachments for our Pado PureWave massager to fit our Toloco massage gun. The PureWave battery died and I tried to replace it, but broke it, so bought new massage gun. I like the big rubber massage attachment…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Feyd-Rautha Pose from Dune 2 - Fix and Re-Sculpt. I will keep this in the free area. I am not 100% confident with the fix. The model itself from andrdudka is awesome as fan art, but it had multiple issues for printing. And I was blowing…
Print approx. €15.69–€19.18 excl. taxPreliminary estimate for one variant
I created this model to remove the arm from a Ikea FRIDANS roller blind but the model may also be used to replace broken parts of common roller blinds. The mechanism is working quite well, if you are having issues please write a comment…
Print approx. €5.02–€6.14 excl. taxPreliminary estimate for PETGSource material: PET
Print amount for full board game (small variant): Castles of Mad King Ludwig: 48x 1000, 30x 5000 For sale: 84x 1000 Coins are defined in attached openscad source and it is easy to define your own sizes and denominations there. Note: you…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Miniature Transportation from a Filament Box OpenSCAD file for modding to your own filament box dimensions.
Print approx. €2.44–€2.99 excl. taxPreliminary estimate for one variant
little bit of hot glue is nessesary for good hold in tray , ideal for making a battery from cells , its made for my mini 10w solar system in garage if printed please add a make thanks
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Check video on youtube: I printed the diffuser in vase mode, since I could not print it without breaking, I made a little edge for strength. (which does not bother me much) Then assembled and loaded the ESP-01 with programmer (or loosely…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I really had to go for it … This bad boy is a filament print of the robot in mutible pices to combine to a 1,5m tall version. This print is done with regular cheap PLA filament since it was intended to be painted from the very beginning.…
Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant
Modelo de Nimbus 2000 con base para decorar. Impreso con una Ender 3 en PLA y pintado con acrílico. Altura de capa: 0.2 Relleno: 10% Soporte: Si Adhesión a la cama: No…
Print approx. €7.86–€9.61 excl. taxPreliminary estimate for one variant
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
As featured on Seinfeld, I've created a 3D printable version of Kramer's famous Coffee Table Book of Coffee Tables, that also functions as a coffee table. The book has functional “print-in-place” hinges for both the front and back covers,…
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
While checking out the Fuse 1 from Formlabs, I spotted that they offered a variety of sample prints done on the machine to check out the quality for no cost and no shipping. After evaluating the nylon 12 case linked below, you can make…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Poignet tournante à clipper, écrou à visser, le tout en trois partie au lieu d'une d'origine
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
A Hueforge manga panel of Gyro Zeppeli from JJBA: Steel Ball Run. If you try to print this, I would like to know how it looks like with darker blue (originally used as shading, but I don't have a blue filament that dark). I'd be glad to…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
I thought I'd recycle some empty spools of filament I had lying around. Since my wife works at a daycare center and they have a shortage of toys, I thought I'd make a few things so the kids could play safely. I came up with this simple…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
The Zócalo on Babylon 5 was a central meeting place in red sector where many characters would go to unwind, have drinks etc. The ice blue neon sign recreated here featured in many many episodes in the background. Through various forums…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
A three colour keyring and fridge plate featuring Hobbes from Calvin and Hobbes. I've included the colour change .gcode created in Prusaslicer as well as the .stl
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Printed from PLA+ and PLA Silk. Fill 100% When printing letters, use max. speed. 25mm/s Black filament: PLA+ Gembird Gold filament: PLA Silk Spectrum As a wall mount, I recommend:…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Rachael From Blade Runner Stylized Kind of want to hollow this out to throw in an AI stand alone developer kit. Clone Rachael's voice from the movie and use that with the latest open ai chat bot so I can have my very own Blade Runner…
Print approx. €7.81–€9.55 excl. taxPreliminary estimate for one variant
Ever wondered what to do with Google Cardboard VR Glasses you may have lying around? Look no further. With this print, you can turn the fresnel lenses that you find in Cardboards into an eye loupe. The model is designed for one 25 mm…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
3D model of the 1FNT x-ray file from PDB
Print approx. €15.35–€18.76 excl. taxPreliminary estimate for PETGSource material: PET
Print it from PLA or PETG
Print approx. €4.03–€4.92 excl. taxPreliminary estimate for one variant
This is the spaceship depicted in book 2 of the Gatlin Series; The Destroyer. This is a spaceship that is mostly engine. Its a remix of a previous design; since I just love the shape so I wanted to uses it for another model. This is a…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Just slide the individual colors into the template. Must use a hammer.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
I remixed the "Base_Card_Deck.stl" from 3D Printy my magic the Gathering deck. The box easily fits 100 sleeved cards plus sidedeck. I would use the “Support on build plate only” function of your slicer for printing these modells. Update:…
Print approx. €10.39–€12.70 excl. taxPreliminary estimate for one variant
For 3D printing: I has been used ABS material because it is quite tough. Because wheel is very small it is best to use small nozzle like 0.25mm I has been increased hotend temperature +5°C above default The wheel diameter is set +0.1mm…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
The nozzle on the Bosch Advanced Vac 20 vacuum cleaner for removing dirt from storage for small parts. When it is necessary to remove dirt from the storage areas of small parts such as screws and nuts, you can use this nozzle. It allows…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Commemorative coin pendant Make a pendant from a commemorative coin without damaging the coin. Adjust the size of the model in the slicer and don't forget to pause the print to insert the coin.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
This is my design for a stackable letter tower that can (and should) be illuminated from the inside. It is a two-color print, with one color forming the shell (or frame) and the second—preferably transparent—creating the fill. The set…
Print approx. €29.99–€36.65 excl. taxPreliminary estimate for one variant
In the 3ds Game: “Tomodachi Life” when a Mii is in love this icon shows up in their window! I've made 2 other models so far which I've put into a collection so check that out! Also I have been using an Ender 3 Pro for this so I don't know…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. You can print it in different sizes. I scaled it down to use it with a keychain or for decoration, but you can also print it in original scale.…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Hello, Today I have for you a Holder, a stand for the PSVR camera ps4 from v2 to v1. It is suitable for attaching the V2 camera to the V1 camera. It holds beautifully, even the position when you turn it. It can be adjusted nicely. It is…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
For the perfect card storage I recommend the size "Base_Card_Deck.stl " for the box, you can fit a deck with 100 cards plus a sidedeck and sleeves loose in it, also I recommend the "Long Latch.stl " as latches, because it can be with the…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
If you want to use the pedicure attachments from your Beurer FB 50 foot spa independent of the foot spa this adapter allows you to drive them with an electric screwdriver or drill. You can insert the adapter into the screwdriver/drill…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
I bought a DTU electronic set with a display which was not fitting in the enclsure. Therefore I adapted the lid.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
I have already created a remix of the Prusa.Box ( see here ), which served as the basis for this pen holder. The lid and lettering were adjusted accordingly. The screw lid gave way to a lid with a hole, so that the box can now also…
Print approx. €6.07–€7.41 excl. taxPreliminary estimate for PETGSource material: PET
Print, use glue and you have miniature of poppy playtime
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Hello! I created a “Gingy” keychain as a multicolor print. Takes approx. 40 min, and only uses 11g of filament. It has 5 colors, so there are 4 color changes after starting with yellow. The colors in order are: Yellow (0 - 0.6mm) Red (0.8…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
A set of picture cards from the Snellen board used for younger children or children with speech impairment to learn individual pictures (square, circle, heart, house, table, chair) or their recognition. The cards come in three printable…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
I used Tinkercad to make this and I don't know if it works with all 3d printers or whatever you're using it for. Feel free to remix it I'm not a huge creator. Hope you have fun with it! -HardworkingDog (P.S. Sorry the image quality sucks…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This model is from the Nintendo 3ds Game: “Tomodchi Life.” I tried looking for these and say no one had made any I decided to make them myself. Right now I'm working on something big right now but my printer is not cooperating so expect…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
This is a cover for the Bloks. New Style Display. This model was made to cover the displayholder when the display is detached. Best to print with PETG to resist rainy days. Supports needed for the slider like in the 3mf.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This model is like the other one I have made but this time it's the problem icon! I've been using an Ender 3 Pro to print these (I know it's kinda old to some of you) so be cautious when you print this I'm guessing it'll work with other…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
This limits how far my refrigerator door can swing open, preventing it from hitting a newel post. This is made specifically for my GE ENERGY STAR 21 Cu. Ft. Fingerprint Resistant Stainless Steel Bottom Freezer Refrigerator - GDE21EYKFSS
Print approx. €8.84–€10.80 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 58.38x169mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.08mm and the Actual…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
These inspired bookends capture the legendary adventure of the One Ring. The journey begins in the comfy and lovely Shire, but as your library grows, you progress toward the dark reaches of Mordor. While this is a stylized representation…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Infill - 100% Brim - Yes Supports - Yes Multi-filament print - Yes, but in layers Color for the layer print - White, Red, and then Blue
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
My Homestuck collection is growing! This is the character Damara from Homestuck. To make this model you will also require 1 x paperclip. I'm particularly fond of this one, because it required a little problem solving. Damara has some very…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Naughty Rhythms - ska band logo - Canberra ACT ska from the 80s. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. With layer/colour changes built in. Note that the corner locating pins are…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
Kenny From South Park
Print approx. €9.14–€11.17 excl. taxPreliminary estimate for one variant
Chani (Zendaya) From Dune. Not happy with it. Im working on a second and am afraid that its a dud as well.
Print approx. €12.53–€15.32 excl. taxPreliminary estimate for one variant
Edgar from Brawl Stars
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
No supports needed. Make sure that the bed is clean and the first layer adheres properly. It is a good torture test for print bed adhesion and filament retraction. Good luck and happy printing ! ^-^ *Version 1.35 has improved legs so they…
This 3D model is a gift for everyone. In return, I ask only that you mention me. However, some users on this site appropriate other people's 3D models, pass them off as their own, and restrict the license. Please report such people to the…
This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…
Create your own name in 3D! The file contains the complete alphabet in the standard font . Print the letters you need and snap them together . Don't forget to print the endcaps to complete your nametag. You can even use the letters to…
This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…
Gonggi (Korean: 공기) also known as Korean Jacks and Seven stones is a popular Korean children's game. This variant has been popularized by Netflix series Squid game (season 2)
