Search results: g22

Sort order

49 models

P
Printablesfloergri

Motorola Advisor TPG2200 belt clip

commercial use This model is not released for commercial use. If you want to sell products related to this model, commercial licenses are available via direct message. description a printed case with a integrated belt clip for a motorola…

Downloads
959
Likes
28
Rating
5

10" Rack mount for TP-Link TL-SG2210P Switch (Omada)

This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…

Downloads
633
Likes
53
Rating
0
P
PrintablesKN16

Improved SG22 Lower

The original design that had a large opening that could potentially let debris inside the operating mechanism. This version closes that up to only what is necessary.

Downloads
570
Likes
58
Rating
0
P
PrintablesDiew

10 inch rack TP-Link SG2210P - SG2008 - SG105-M2

It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…

Downloads
415
Likes
45
Rating
5
P
Printablesjfr07

TP-Link Omada 2x TL-SG2210P 19" Rackmount Rack Adapter (SG2008P SG1210P)

Based on the very good model of ER605 & OC200 Rack Adapters (V2) by Sorcier, I remodelled them to fit 2x TL-SG2210P. It's a heavy device, and 2 of them in this pair of brackets are recommended to be supported, either by support angles or…

Downloads
363
Likes
31
Rating
4
P
PrintablesKN16

G22 Upper - Reinforced

The original had walls around the charging handle recess were only 2 thick. This remix reinforces that section for improved rigidity. Print orientation threads up or down.75 to 100% infill. .2 layer height with support.

Downloads
274
Likes
31
Rating
0
P
PrintablesPrettyBoi
18+

The source marked this model as adult content.

Downloads
226
Likes
29
Rating
0
P
PrintablesMindelheini

Motorola TPG2200 desk stand

Simple desk stand for the Motorola TPG2200 Pager. Easy and Fast to print PLA 0.2mm

Downloads
171
Likes
10
Rating
0
P
PrintablesKN16

SG22 Handel w P Rail.

SG22 Carry Handle with picatinny rail and fixed sights. 8.36 inches long, ideal for smaller printers. Open handle is easy to grip. Mount with 2 M4 screws and nuts, or similar in SAE

Downloads
160
Likes
19
Rating
5
P
PrintablesBastian F

Motorola Advisor TPG2200 Smart-Home-Pager-Stand

Ive designed a little stand for the charger of the Motorola Advisor TPG2200 with space for an Shelly 1 smart switch. You can configure the shelly as an sensor so you can switch on smart devices when the integratet relais. You need the…

Downloads
147
Likes
8
Rating
0
P
PrintablesTartanZia

Pickguard for Gretsch G2220 Junior Jet II Bass

I decided my Gretsch Junior Jet could use a little more color. I copied the spline from the original pickguard and added the ‘G’ logo from Gretsch drums. This is sized for the stock pickup rings. This printed great for me in PLA on my…

Downloads
128
Likes
8
Rating
0
P
Printablesfloergri

Motorola Advisor TPG2200 Homestation for EspHome

A remix of a Motorola Advisor TPG2200 Homestation designed to house a D1 Mini microcontroller for esphome compatibility for homeassistant . This allows you to craft all sorts of smart home automations via homeassistant when you get an…

Downloads
119
Likes
14
Rating
5
P
PrintablesKN16

SG22 6 Inch Handguard

SG22 6 Inch Handguard

Downloads
118
Likes
15
Rating
0
P
PrintablesKN16

SG22 Nut with threaded inserts and Handguard

Barrel nut and 4.33 inch handguard for the SG-22. The nut uses heat set inserts for a more secure assembly. The nut has 4 holes every 90 degrees. Use a soldering iron to press in threaded inserts. There are two versions of the nut…

Downloads
117
Likes
14
Rating
0
P
PrintablesTGM

TPG2200 TETRA-Pager Case

In the context of modernization plans, fire departments in germany are transitioning their alerting systems to digital tetra alerting. Conventional radio receivers are being replaced by modern devices such as Motorola’s ADVISOR™ TPG2200…

Downloads
116
Likes
17
Rating
5
P
PrintablesKN16

SG22 8 Inch Handguard

8 inch handguard for the SG22

Downloads
113
Likes
15
Rating
0
P
PrintablesKN16

SG22 6 Inch Handguard With Lower P Rail

SG22 6 inch handguard with lower picatinny rail for use with grips or bipods.

Downloads
102
Likes
14
Rating
0
P
PrintablesKN16

SG22 6 Inch Handguard w Grip

6 inch handguard for SG22 with integrated foregrip.

Downloads
97
Likes
21
Rating
0
P
PrintablesBIGBLOCKDOUG

SG22 7.5 inch handguard

Simple handguard for sg22

Downloads
90
Likes
8
Rating
0
P
Printablesxam464

TP-Link SG2210XMP-M2 Power Brick holder

As far as I know is this model compatible with the SG2210XMP-M2 and ER7212PC.

Downloads
87
Likes
5
Rating
0
P
PrintablesKN16

SG22 Carry Handle w RMR Mount

SG22 Carry Handle with RMR Mount and integrated fixed sights. Designed to work with the 7 & ¼ inch handguard . This is a long part. It will not print on smaller machines like an Ender 3.

Downloads
79
Likes
11
Rating
0
P
PrintablesKN16

SG22 7 & 3/4 Inch Handguard

SG22 7 & 3/4 Inch Handguard

Downloads
70
Likes
12
Rating
0
P
Printablesangrygriffin

10" Rack Mount for TP-Link Omada SG2210P - Ports Front, Internal Power Cable Routing

I couldn't find a 10" rack mount for a SG2210P which was designed for the ports facing forward. This model has a gate at the back (press in using the bar closest to the "teeth") to stop the switch sliding rearward when you plug in network…

Downloads
63
Likes
8
Rating
5
P
Printablesjimmysdiy

Master Airbrush G22 Paint Lid

I recently purchased a used AirBrush Master G22 Kit. It did not come paint can lid. So I designed one in TinkerCAD. Fits Master G22/23 Air Brush Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…

Downloads
53
Likes
1
Rating
0
P
PrintablesBattousai

Coast G22 module

Module made for the Coast G22 flashlight, it fits on the Modular Leatherman Wave holster ( https://www.thingiverse.com/thing:2478506 ). NOTE: Print upside down to avoid using supports. Print Settings Printer: Artillery Genius Rafts: No…

Downloads
42
Likes
2
Rating
0
P
Printableswarthog9

Bambu Lab AMS Silica box - Hygrometer Thermometer Stand (Zigbee TZE200 / ZG227C)

This is a remix to add an additional upper lid for Bambu Lab silica container supporting the Zigbee TZE200 sensor

Downloads
39
Likes
1
Rating
0
P
Printableswandering lobo

SG22 Picatinny rail adapter for handle

Holes are intentionally left small for a tight fit. print in the obvious orientation.

Downloads
35
Likes
1
Rating
0
P
PrintablesTartanZia

TV Jones Thunderblade Pickup Ring for G2220

I replaced the stock pickups on my Gretsch G2220 Jr Jet with TVJones Thunderblades. The original pickup rings were a bit too tight. I thought there could be a better solution. Direct mount the pickups to the ring. I printed these in PETG…

Downloads
31
Likes
0
Rating
0
P
Printableshoovernaught

MDG22 Sci-fi spaceship toy No.6 (larger sized) - no supports - easy print

Mini toy sci-fi spaceship separated into easily printable pieces, enabling the opportunity to customise the colour scheme. Great for those looking for a non-franchised and non-weaponised space themed toy. This is the larger sized version…

Downloads
29
Likes
6
Rating
0
P
PrintablesHamTronix

Airbrush Holder - Extended - Master Airbrush G22 & G23

Love the design, but my Master G22 & G23 airbrushes didn't sit quite as securely as I wanted. A quick tweak to the holde

Downloads
28
Likes
7
Rating
0
P
Printableshojo

Motorola TPG2200 Battery Cover with Clip and RFID Chip cavity

Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems. For removing the cover you need to use a small screwdriver or similar und pry the cover down from the pagers body carefully. The…

Downloads
27
Likes
3
Rating
0
P
PrintablesKaeptn-G.

BMW Armwrest Organizer G22, G23, G26, i4, ...

I wanted to find a clean way to charge my phone while on a longer drive and connected to wireless Android Auto. As the built in wireless charger seems not to be able to charge the phone while using Android Auto, another solution was to be…

Downloads
27
Likes
2
Rating
0
P
PrintablesBajuware

Motorola TPG2200 with cutout on the bottom

I created a remix with a cutout from the bottom for easier removal or loading of the device.

Downloads
24
Likes
1
Rating
0
P
Printableshoovernaught

MDG22 Spaceship toy No.6b (smaller sized) - no supports - easy print

Mini toy sci-fi spaceship separated into easily printable pieces, enabling the opportunity to customise the colour scheme. Great for those looking for a non-franchised and non-weaponised space themed toy. This is the smaller sized version…

Downloads
23
Likes
5
Rating
0
P
PrintablesMikyner

Gridfinity Turbo lighter Unilite Tokyo g22

Gridfinity holder for Turbo lighter Unilite Tokyo g22 magnets 6x2mm

Downloads
19
Likes
2
Rating
5
P
PrintablesGood_modeles

NSFW Пистолет G22 для манекена № 13

Glock 22 для манекена № 13

Downloads
17
Likes
4
Rating
0
P
PrintablesBlackbird

Remote holder for srg22cw

Remote holder for srg22cw which comes with the LG 27gr95qe-b monitor.

Downloads
17
Likes
1
Rating
0
P
PrintablesPolymerToad

SG22 Airsoft 6" Extended Handguard

This is an SG22 6" extended handguard and barrel nut for airsoft.

Downloads
14
Likes
4
Rating
0
P
Printablestuck-ski

TP-Link Omada SG2210XMP-M2 10" Rack mount

Inspired by @RussellDame_2238247's 10" rack mount. Designed with a tight fit in mind so that screws are not needed to keep it in place. The base plate extends far enough to be supported by L Brackets on the back of most 10" racks. I am…

Downloads
13
Likes
1
Rating
0
P
PrintablesSlegnor

Oculus Sensor Monitor Clip 17.5mm depth ACER G226HQL

I printed this at 0.15mm quality and 50% infil just to give it some extra strength but 30 infil is probably OK Remixed the internal overhang to fit my ACER G226HQL monitor which is only 17mm deep Print Settings Printer Brand: Creality…

Downloads
12
Likes
0
Rating
0
P
Printablesrahix

TPG2200 Pager Charging Station Wall Mount

About This is a mount for conveniently attaching the MOTOROLA TPG2200 charging station to a wall. Because the charging station unfortunately has its USB-C port on the back, you will probably need a USB-C angled adapter to nicely route the…

Downloads
11
Likes
1
Rating
0
P
PrintablesSimpsonB3D

Make Your Pet phone adpater for Motorola G22

Print both parts, fit the clamps under the top cover as normal and put the riser plate beneath before screwing down to give clearance over the servos. Cover modified in Prusasclicer using negative volumes. May not print using other slicers.

Downloads
4
Likes
2
Rating
0
P
PrintablesCharly

TP-Link Omada 10’’ inch 1U Switch Rack Mount (SG2210P / SG2008 / SG105-M2)

I did not want a server rack cluttered with patch cables that ruin the visual aesthetics of my front panel ! I chose a TP-Link Omada SG2210P switch with the RJ45 ports routed to the rear to maintain a clean design on the front face of my…

Downloads
3
Likes
1
Rating
0

Aqara (WXKG22LM) holder

Простая модель держателя для двухклавишного выключателя Aqara, разработана для более удобного использования и более удобной смены батареек. Принтер - Creality K1 Max. Пластик - SUNLU PLA Classic Black. Температура сопла - 220 /…

Downloads
0
Likes
0
Rating
0
P
Printables

10 inch rack TP-Link SG2210P - SG2008 - SG105-M2

It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…

P
Printables

Motorola TPG2200 Battery Cover with Clip and RFID Chip cavity

Motorola TPG2200 Tetra Pager Battery Cover with Clip and RFID Chip cavity for identification or lock systems. For removing the cover you need to use a small screwdriver or similar und pry the cover down from the pagers body carefully. The…

P
Printables

Motorola TPG2200 with cutout on the bottom

I created a remix with a cutout from the bottom for easier removal or loading of the device.

P
Printables

10" Rack Mount for TP-Link Omada SG2210P - Ports Front, Internal Power Cable Routing

I couldn't find a 10" rack mount for a SG2210P which was designed for the ports facing forward. This model has a gate at the back (press in using the bar closest to the "teeth") to stop the switch sliding rearward when you plug in network…