gates belt cdx front sprocket guard
I fixed the part with small wood screws.
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 19
- Likes
- 2
- Rating
- 0
166 models
I fixed the part with small wood screws.
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…
Features Fully customisable to suit any diameter of PVC pipe and to suit your own printer tolerances. Accurately calculates the length you need to cut your PVC pipe to in order to achieve a specific dimension (see OpenSCAD console…
🇮🇩 Selamat Datang di Indonesia Welcome to Indonesia! This model was created by Dany Sánchez . The Gates of Heaven are the main entrance to Pura Lempuyang , a Balinese Hindu temple or pura located in the slope of Mount Lempuyang in…
Inspired by tension meter inspired by Prusa but with a gauge on both sides, optimized for ABS. I use it to tune the belt tension on all my Voron printers. Since I mainly print ABS it's been optimied to give the best results when printed…
Shifter gates: This keeps the same gate geometry and switch mounting as the original gates, but upgrades the thickness of the gate panel to feel more sturdy. The original shifter gates that came with the shifter were thin plastic. Shift…
Traffic cone 1/24 scale, RC crawler gates
We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created a big Jurassic park gate for the event! He then shrunk it down for everyone to print with ease! You will need to print 2 pillars, 2…
AOcolossus hope this is what you were after, I wasn't sure what size you wanted it or if you need it split print ready or hollowed so it can be worn on the head? Cheers Jace. Oh and do you still want Horrus done too in a similar fassion?
I've installed a duct collection system in my home shop, and needed to get several blast gates for each tool, so I can get the maximum air flow on the tool in use. I use three common duct sizes: 6 inch, 4 inch, and 2.5 inch. I've created…
I needed a quick and simple way to connect lengths of PVC pipe together without buying expensive connectors. In my case DIN EN 61386-21 with an outer diameter of 20mm Printtips The files print without support and should be correctly…
Friction fit on the corner of a cardboard box to make some cheap FPV racing gates. Assembly: It works best if you cut “rings” out of the middle of box (ie cut off the flaps first). You can then cut it at opposite corners and trim the…
Start/Finish gates intended to be used with the SCX24 - Cone To finish off the Crawler Course you will surely need Start/Finish Line gates. Multi-Color Gates can be achieved by a simple filament swap to achieve the Black-White checked…
Printed at 0.3mm layer height with a 0.6mm nozzle in Overture Silk Green PLA, no supports
Welcome to Ancient Greece! Joel Ristol, aka @1.6_3dart shares this model of a hypothetical reconstruction of what the walls of the famous city of Troy could have been like. Troy was an ancient city, setting of the Trojan War from Greek…
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
This is not my idea, I found the design for cardboard gates and only modified them to have 3D model printouts. The gate is smaller than the one received with the kart and allows making smaller tracks for those of us with smaller flats. It…
drawing template Logic gates 200x11x1,2mm
Modular Dust Collection Distributor with integrated blast gates Modular Dust Collection Distributor with each module containing a blast gate for distribution control: Fully designed from scratch using OpenSCAD. Parts: Housing: The main…
MAYFLASH Universal Arcade fight stick/arcade stick square, circle and octagon gates. They may fit other joysticks do check if they are compatible with yours before printing as some slots or the snap hooks may be in different places. I…
metal sand casting sprue gate for quick consistent casts 10% infill no supports bed adhesion mouse ears included
Instructions for printing: for bambu studio or other Slic3r slicer just open the 3mf file to change your printer and fillament settings for other slicers the scale factor for the og parts is 90.16% I used 15% infill with 2 wall loops…
Y-Axis belt tensioner for Prusa MK3. This is for a 20T Gates Idler with a 5mm bore. It's loosely based on MattyVee's excellent design, https://www.thingiverse.com/thing:2786671 . Items you'll need for this: (1) Gates 20T idler with a 5mm…
Different types of fences for Model-Railway in H0.Added 2 different walls and gates. Update: Wall in 3 Versions to build a longer fence.
a Mario Kart Live play set thats optimized for hospitals, with minimal geometry for easy cleaning. the gates are made of 4 parts, with two identical legs and two segments for the banner. the two banner sections should snug fit and i…
CAUTION! I designed the parts for being printed in MJF i.e. high accuracy and tight tolerances. EDIT-24.12.2021 added a .step file for a matching mod of the EVA extruder. For the mod I got rid of the belt tensioners, since we already have…
Approx intended scale for this house is 1:64, supposedly to fit two HotWheels, miniGT or similar car models. It does not replicate a real building, therefore proportions may not exactly be realistic. Assembly 1st floor assembly order…
Cerberus, the three-headed dog guarding the gates of hell
I made these mechanical logic gates in FreeCAD to teach computer science basics to a younger group of students. Printing recommendations: PETG (PLA springs wont last), no supports needed, AND gate pivot point will benefit from increase in…
This model is copied from thingiverse and was made by kwmachine and submitted on July 06, 2018: "This hinged corner will allow you to make MultiGP gates that easily fold up for transport and storage. Now in multiple sizes (500 = 1/2", 750…
Rework of the original Y idler by gregsaun for the MK3 Bear 2.0 full upgrade with a belt tensioning and tracking mechanism which uses a Gates 20T 5ID toothed idler. For a version using the stock 20T 3ID smooth idler, look at my previous…
Come support these models over on Patreon Buy my time, Not my models. Barrel Gates for Gaslands, remixed from existing terrain. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: 0.2 Infill:…
Shift gates to be placed over the standard 8 position shift gate. Extrusions on the back help to keep in place. These are sized tight for my shifter, requiring some sort of tool to start prying them off. Printed in PLA or PLA+, 15%…
Pepakura File uploaded for free from the https://www.onekura.com/ web site Print instructions Category: 3D Printer Extruders
My models are not perfect, they’re just for fun. Hope you enjoy these as much as I do!
This model is copied from thingiverse and was made by ReflectorBB and submitted on September 17, 2018: " Update Kwmachine (the original designer i remixed from) has made some vertical versions of his hinge, the look good, and considering…
There are many versions of this game, I'm not sure if this organizer will fit them all. Check the inside dimensions of your box (310x220x70mm). Does not support sleeves. Supports vertical storage. Player tray must be printed four times,…
I recommend you to use the following settings: Nozzle 0.4mm Layer height 0.2mm No supports 2 Wall Lines 3 Top and Bottom Layers Infill 20% Approximate printing time: 3:30 Approximate material used: 27g I would appreciate your feedback to…
A simple drawing template containg 4 logic gates (AND, OR, XOR, BUFFER), 4 electronic components (Resistor, diode, capacitor and inductor), 2 circles (smaller for wire conjunction points and logic gate negation, big one for sources,…
In addition to the perfect ball valve from @Johan_9671, I have also created the perfect servo mount for normal-sized servos that can handle a force of approx. 15 kg - even 25 kg. I have also created a Youtube video in which you can see…
I wanted to use the included squircle gate for my Sanjuks V3 but I found the throw to be too long. I also didn't like how impacting the gate felt harsh/abrupt. I commissioned a local designer to design and prototype smaller gates, and…
Customizable, fully printable whoop gates. Design goals were: Use as little material as possible Print without supports Be able to scale the gates up to a size of your choice. This is realized by allowing to set the amount of corners you…
Make super cheap indoor fpv gates and towers from 14mm PVC pipes. You can buy this type of pipes at a local hardware store or online very cheap. 1 type of part for both gates and towers. Good layer adhesion necessary, you may want to…
Gates Heavy Duty 16 tooth flanged pulley for 6mm belts Heavy Duty version of the common 16 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
I shall do a proper write-up and details on this at a later point.. Just want to get the files out (as it's JP 30th Anniversary!).
A set of boolean logic plates for the Gravitrax marble run game: AND, OR, NOT, NOR and NAND. For every plate, also print a Plate Ring and attach to the bottom of the plate. Print without supports. STEP files are included. AND/OR AND and…
Print 4 picies, than press fit them. If the fit is too tight, use a vise to push the picies together. Available in 26 and 38 cm diameter. Mount them together or to objets using double sided tape. There are also mounting feet, for use with…
Use top layer ironing. Prints good without supports.
Delivery dock scale model scalable can be put together side by side require glue
Gates Heavy Duty 40 tooth flanged pulley for 6mm belts Heavy Duty version of the common 40 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
I wanted a use for the benchies I had made. I decided that I would do a boat version of the Gaslands miniature game.
I printed this with 0.12 mm layer heigh and gates XOR and XNOR didn't turn out well(it's probablly because i have 0.5 mm nozzle and old printer) so there's also stl file without XOR and XNOR.
The chain guard for my Specialized COMO SL 5.0 caught on my right pant leg and popped loose. After a closer look at the design, I made a version that extends lower over the front sprocket reducing the likelihood of a catch. In addition,…
Commercially available blast gates suck . They leak air, they’re a poor fit if you use PVC for your ducting, they jam up because of the design, and they fall apart because they’re held together with hot glue. These custom blast gates…
Gates Heavy Duty Smooth Idler Pulley Working model created to aid in printer part design changes. The Gates idler is far more durable and reliable than the usual imported pulley found on most printers. This version of the pulley is…
I recently replaced my plastic 4" (~100mm) blast gates with cast aluminum gates from Powertec , and I needed wall mounts for a few. The blast gates I used are just under 11mm in the slot, and the 3 bolt holes are 77.5mm apart. Included…
to draw, design logic circuits with more order.
A "putting gate" is a training device used to practice putting in golf. The idea is to narrow down the focus to a smaller target. Included here are 3 different widths of putting gates, 55, 75, and 95mm. Two versions of each are included,…
I had some GATES idlers leftover from my Bear projects. Might as well throw these on the Mini. Uses m5 hardware.
Stake and joiners, the curved joiner fit the approximate curvature of a ~180cm pool noodle. But the curve is of course adjustable so I think from 150-200cm should be fine. I print with 3 wall parameters and 10% infill. The “handle”…
Arkham Horror is one of my favorite board games. It is a cooperative game based on the horror fiction of H.P. Lovecraft. When playing the game I noticed that it can be hard to see the gates on the board, as the pieces are laid flat and…
🇯🇵 京都へようこそ! ⛩ Welcome to Kyoto! This model represents the famous thousands of vermilion torii gates, which straddle a network of trails behind the main buildings of the Fushimi Inari Taisha (伏見稲荷大社) an important Shinto shrine in southern…
Buy me a Coffee! 3D printable gates that will fit these Seimitsu joysticks: LS-33 LS-55 LS-56 LS-58 LS-60 LS-62 SEL-70 / SELS-70 Settings: This model was designed with a 0.6mm nozzle and PETG in mind. Should print fine with 0.8 and…
Printed with Bambu X1C at 0.12 with 0.4 Nozzel (0.2 recommended) There are going to be gaps but it looks awesome anyway.
Designed to be used with 3/4" PVC piping of any size. These are meant to be modular so that you can make various different combinations to build any basic track you want using the pieces. Optionally covered with jumbo pool noodles for…
PVC 32mm pipe connectors for building FPV gates-cubes/ladders
This is a remixed/modified N4+ Y tensioner model from clogged_nozzl3, which was based on SilencedFrost's (SF) X tensioner. Modified to fit 14mm wide Gates/Runice Pulley running with 9mm GT2 belt. Pulley is secured with a 22mm Dowel Pin…
3 Gates for Joystick Seimitsu LS-40 Original Square 18x18mm Disc 18mm diameter Shortest throw octagonal Step file provided for easy modification to try other type of gates ( 2D, no diagonal, etc. )
Summary Get your fully Lego Duplo compatible classic fence gates! Compatibility The fences are fully compatible with Lego Duplo. They fit onto and between the studs, and you can add more fences or other Duplo bricks. Be sure to check out…
Corner Connector 4x for PCV Drone gates
A Gate to go whit my wall: https://www.printables.com/model/695571-soviet-concrete-wall One split version to glue wire mesh inbetween. Made for games like Fallout, Mutants: Zone Wars, This is not a test, Last Days, Zona Alfa and others.…
Prusa XL carriages that have the Gates 20t 6mm belt 3mm id for prusa for where the belt touches the toothed side of the belts. It should make the belts last a lot longer in theory. I would install this mod with this one as it does require…
This is an insert/organizer for the boardgame At the Gates of Loyang (Vor den Toren von Loyang). It supports sleeved cards and has space for a discard pile tray (optional print). There are two spacers (full size and eco). You only need…
I worked this up for myself a couple of months ago and never released it because I didn't want to muddy up the waters with the adjusted belt path. When Prusa released the MK3S with the R4 Y-Idler I compared mine to theirs and saw that I…
Gates of Hell Coaster Holder This model is a print-in-place coaster holder that is consisted of two parts, which are easily assembled together. I recommend using glue. I included two print profiles. [AMS] 0.2mm layer, 2 walls, 15% infill…
Divine Elegance: Angel of the Gates of Heaven Bring a touch of celestial beauty into your space with this stunning, highly detailed angel statue. This piece features a gracefully sculpted figure with majestic, multi-layered wings,…
These are scale models of horizontal fences and gates I make for my clients. They are all created at 1:25.4 scale: 1 mm in the model represents 1" in real life. The lumber is all nominal 1x1s, 1x4s, 1x6s, 2x4s and 4x4s and the fence…
mount for the LDARC 500mm whoop gate (like this one https://www.youtube.com/watch?app=desktop&v=7EiHoK-raqc ) holes for zipties and for a 1/4 camera mount screw. double face adhesive tape is also an option. print with no supports. I've…
Gates Heavy Duty Idler Pulley Working model created to aid in printer part design changes. When you are designing your pulley holders to upgrade to this pulley, you can add this accurate model to your design to make sure it fits. This…
These are scale models of fences and gates I make for my clients. They are all created at 1:25.4 scale: 1 mm in the model represents 1" in real life. The lumber is all nominal 1x1s, 1x4s, 1x6s, 2x4s and 4x4s and the fence boards are all…
Gates Heavy Duty 20 tooth flanged pulley for 6mm belts Heavy Duty version of the common 20 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
I had to change the rear gear of my bicycle gates belt system. The original beltspaner is kind of expensive and i use it maybe once a year or so. So I designed a simple spanner for the gear with 19 to 24 tooth. The 19 and 22 tooth design…
The attached STL's are for a hexagonal (6x corner pieces) gate and wooden strips with the dimensions of 10x5mm the length of the sticks is variable, I used different lengths to see which one I like best and I settled with 170mm. I use m…
As much as I love all the designs on the internet for gaslands racing gates, they take up a lot of space. I wanted to create a set of “gates” (well, more like racing lines I guess) that were simple to print, readable right after printing,…
This is a remix of MattyVee's 16T idler base to accommodate a larger and more robust idler. In his version, you have to use an idler no more than 8mm wide. This version will allow you to use a 10mm wide idler (6mm belt), up to 15mm tall.…
I decided I needed some small stargates and compatible terrain bases for my Meepleverse kit, so I designed these. The bases use the texture from my desert temple set, but I've printed them with marble PLA. The Stargates fit in nicely,…
Compact and durable FPV racing gates designed for TinyWhoop-class micro drones . This model is made to fit 20 mm tubes — perfect for building lightweight and portable indoor race tracks. Print Settings: Material: PETG Layer height: 0.2 mm…
I wanted to try a square gate on my Etokki Omni. So made one (for the Taeyoung Fanta lever). also made a octagonal and circle(so you can customize with color). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
I had the bearings fail in the original tensioner for one of my printers. I realized they were only using a single bearing instead of a double and found that there were toothed options which made sense to me. You want the 20T equivalent…
Gear for RIB entry gates. Link to the post .
GT3 belts are thicker than GT2 so this allows GT3 belt to be used. You need roughly ~0.7 meters of belt. GT3 belt works with existing idlers and pulleys. Print in ABS or ASA You can buy GT3 belt here: Fabreeko Filastruder
I'm participating in #igow5, and challenge #2 needs some whoop gates. I had none, but I found some 16mm PVC pipes in my local Byggmax for about 2 EUR per 2 meter. Cut them to size and combine them with these T-fittings and you can build…
This is a simple remix of Pasquill's 15mm Belgian gate (or Obstacle Cointet or Element C) for resin printing. one version is simply assembled while another one is resized to match the correct size at 1-100. The whole model was stretched,…
Slalom-inspired gates designed for creating obstacle courses for the BitBot. The design ensures a tight fit for the legs, so they stay securely in place once attached. Simple, practical, and easy to use for a variety of robotics projects.
a bunch of parts and connectors that will let you convert pool noodles into a tinywhoop flying course printed fully in PLA, used supports only on the base plates, but what you use might depend on your printer. no sanding or gluing…
Decorative piece for wall shelf or table top
Super Legit Gate 1.5GT Belt CAD Reference Model Why does this exist? I couldn’t find a Gates 1.5GT timing-belt model, so I made this one for a CAD project. What is it? This is intended as a reference model for belt routing, clearance, and…
Build your own indoor racing air gates or pylons. Just print out the base parts, one or more connectors, and buy some 1/2" pipe insulation from your local home improvement store. You can use a string to keep the gate feet together.…
Seimitsu LS-56 restrictor gates, created for my Arcade Bartop because there is no automatic ones on the market for Seimitsu Joysticks, planed to use in various models of Seimitsu as an extention but actualy this design needs to remove…