GBC Grip / Flippable for Miyoo Mini Plus
I have created a grip which is exact (scaled a few milimeters up) shape of Game Boy Color
- Downloads
- 598
- Likes
- 60
- Rating
- 5
55 models
I have created a grip which is exact (scaled a few milimeters up) shape of Game Boy Color
Gameboy Color mount for the Ikea Skadis
UPDATE 3: Added a version of the battery door/kickstand that holds two micro sd cards. Also added a “Magne'nt” to help hold the door shut if you don't use magnets. It's a work in progress, feel free to leave feedback. UPDATE 2: Added a…
Have you ever wanted to have a gb game on display on your desk or shelf? Print standing up not on side Need no supports
Made a set of inserts which can be used with Cassette Tape cases to not only store , but more importantly display your games! Cassette Tape cases for GB and GBC, you'll need to cut the nubs inside the cases so it can close properly - for…
A custom set of 1/144 scale weapons for use on Gunpla Models, based on the styling of mecha designer Ippei Gyoubu and his work on Gundam: The With From Mercury's Jeturk House Mobile Suits. Included are: Beam Bazooka Beam Rifle Shot…
This is just a simple Remix of the original i found a few years ago it fixes the issue where the Gameboy game can fall out the the holder if filled up side down. I also used the base design to create a GBA game and DS/3DS case that holds…
Sometimes you need a steady hand to take photos with your GameBoy Camera! Why you don't use a Tripod? For this case, i created a holder for my GBC with an GoPro styled mount to fit on my Selfie Stick Tripod. It should works with all the…
The Cartridge Steps, A Triumphant way to Display! Fits GB/GBC/GBA Carts. Fits 8 Carts. There are 3 .stl files; a blank one, one that says Game Boy, and one that says Cartridge Steps.
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the cartridge as possible, a support on the back to help…
Cartridge box for gameboy and gameboy color in the style of Mario Bros. Shaped like a box with a question mark. The lid and base have holes for 3mm d x 3mm h neodymium magnets.
Gundam themed GBC buttons to match my Gundam themed Xipher Slab SP If you plan on printing these, I would highly recommend using an SLA printer
I cut it in half and took off 1 hole. Category: Games
Deutsch: Bitte beachte, dass aufgrund des Alters und Zustands der Verpackung der Wert leicht abweichen kann. Um die passende Datei herunterzuladen, musst du lediglich die Dicke der Verpackung messen und die Datei mit dem nächstliegenden…
Slight modification of the AAA tray to hold GBA cartridges. It doesn't quite fit 5 so this one will hold 4 cartridges. It would probably be too hard to take the cartridges out if they were jammed in there. Update: Added a model to hold…
I printed these on an FDM printed with the face on the bed for a textured look. Initial testing seems like the fitment is good but may have a little more room for improvement. FDM Print Settings .20mm layer height 10% infill - gyroid…
Minimalist design LCD Screen bracket for the 2.2" (small) variant. Has space to hold the driverboard in place too. This bracket centers the LCD, without having to constantly go back and forth with the sticky tape to get it to manually…
This is a remix of BlueShell3D and playfellow's GBC stand and mount, made compatible with the Honeycomb Storage Wall . I'm not sure if the design is durable. I'm still testing it. Don't come crying if your Game Boys fall off the wall.
Lego GBC Ball also featuring the option of making for example a swiss flag
**Centering bracket for Game Boy Color IPS 2.45 screen (some call it V5.0, but I'm not sure)** Why? I design this one because I didn't want to use double sided tape to glue the screen at the shell. With this model, you will be able to…
The stock d-pad on my FPGBC could be pressed down activating all directions at the same time. This made playing games like Tetris very frustrating. I would be pressing left or right, and it would often register up, causing a hard drop. I…
Burger King GBC Shell Drill Guide for use with the BK GBC All in One PCB kit by Helder. Print instructions Be sure to use supports for the square hole and circular hole.
i just wanted a simple way to display my gameboys in my cabinet. took me a couple hours of newbie fusion 360 skills and a slow printer to come up with this. took me an hour to print both on my anycubic i3 mega and a couple 3.5*16 wood…
For all gameboy games, ability to us a screw or double sided tape. Print on its side. No supports needed.
Replacement lever for binder GBC CombBind C12. For fixing to the rod, use the screw.
PLEASE READ INSTRUCTIONS BELOW!!! NOTICE! Gameboy and Gameboy Color have small differences between their cartridge holder sizes, so make sure not to exchange them (although both should work with each) Ever bought a gameboy or gameboy…
Le légendaire gbc-copter, on l'attend toujours pour nous sortir de nos terrains de merde... Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Vehicles
Originally modeled in Shapr3D and after several revisions and remeasuring, I present simple dust covers for cartridges made for Game Boy Advance, Game Boy, and Game Boy Color cartridges. The cut out was originally for the Game Boy Advance…
Basically a fancy version of the cardboard mod to tighten up the stock membranes. Also includes A and B buttons to take out some play. The circle in the middle of the DPad spacer is there to maintain the bottom out distance while using…
Replacement fuel cap for a Parker Strimmer / Bush Cutter / Weed Whacker (PGBC 5200 but may fit other models) Includes small vent hole
A Gridfinity-compatible holder designed to store and organize Game Boy, Game Boy Color, and Game Boy Advance cartridges . This model holds up to 14 game carts , keeping them neatly arranged and easy to access within your Gridfinity setup.…
Print part 1, cab +Z oriented Print part 2 at same direction to avoid support
This is a mount for a GLEDOPTO RGBCCT LED Controller to attach to 2060 aluminum extrusion. I designed this part to work with OpenBuilds Aluminum Extrusion . I built a workbench out of aluminum extrusion and I needed a mount for my LED…
Handle on the CombBind C20 broke at the office. Took a couple measurements and made a replacement. It is a tight friction fit, but it fits. Printed no supports, 90% infill, PLA+
Remix from this bracket: https://www.thingiverse.com/thing:4291731 I only add some tabs to cover the white borders from the screen Print Settings Printer: GTMax Core A1 Rafts: No Supports: No Resolution: 0.3 Infill: 30 Filament: 3D Fila…
Gameboy and gameboy color game cartridges in their protective shells make a great display piece. So I built a little shelf a couple of years ago. This is the 3D printed version. Printing There is no need for any support. Choose the layer…
I am using SketchUp for Schools, so downloading correctly scaled STL files are impossible. The correct scaling is below X-axis (left to right) x Y-Axis (front to back) x Z-Axis (Top to bottom) Switch: 41x19x~10.66mm DS: 41x19x~10.66mm…
A VHS-C insert for Game Boy color rumble carts
Quand il y en a marre! Model de base: https://www.thingiverse.com/thing:4813572 Véhicule modifiable avec 3d builder Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: PolyMaker PLA…
D-PAD Riser for FunnyPlaying FPGBC The issue with the D-PAD on the FunnyPlaying FPGBC is that it’s too sensitive. For example, when playing Tetris , pressing down can unintentionally move the tetromino left or right. This problem isn’t…
I wanted to organize my games and found this stand. It's handy but was too big and kind of plain looking. So I made my changes and two variations for different needs Prints without supports. I printed .2mm layers
LCD spacer for the AliExpress Gameboy Color LCD kit. Fits the LCD panel in an aftermarket shell perfectly side to side and perfectly vertically. No need to make a hackjob out of your backlit GBC by hot gluing it in place. Designed to fit…
Easy and safe storage method for Gameboy Color, Game Boy Pocket and Game Boy REG & AMP chips. Important! Print in ESD safe material to avoid damaging chips. Once filled use a rubber band to keep the tray together. Has been tested with the…
This is a case for the Sanni / Makho Cart reader for Gameboy games in able to dump the savegame before changing the battery. This is a standalone system not requiring a computer in able to dump the ram. This has the full functionality as…
Speaker housing for replacement speaker to fit the gameboy color. For personal use only
Do you need a dummy so that you can test fit your GBC backlight kit LCD without worrying about damaging the actual LCD? Well, here you go. 3D print this and abuse it to your desires. Do note that a replacement LCD is only like $8 but…
Instead of masking with tape, I made a 3D printable bezel that fits in the aluminum bezel of the BoxyPixel Aluminum GBC shell ( https://www.boxypixel.com/collections/frontpage/products/game-boy-color-ags-101-machined-housings ) and covers…
The Cartwork is a modified lower back shell that adds a cut out to your printed Game Boy Color back shell to show off your favorite game carts! UPDATE: … FEEDBACK: If there are specific issues with the model, please DM me on Printables or…
The Carry-On is a modified upper back shell that adds two strap mounts to your printed Game Boy Color back shell. This model is designed for minimal waste. Just replace the upper rear shell of a standard GBC printable shell, strap in, and…
Print at 0.2 height! How to mount No glue or double sided tape needed, just drop in the parts into the shell. 1 - Place the part "SIDE" piece at the left side. 2 - Place the IPS 2.45 screen. 3 - Place the other piece over all.
**Centering bracket for Game Boy Color IPS 2.45 screen (some call it V5.0, but I'm not sure)** Why? I design this one because I didn't want to use double sided tape to glue the screen at the shell. With this model, you will be able to…
I cut it in half and took off 1 hole. Category: Games
The stock d-pad on my FPGBC could be pressed down activating all directions at the same time. This made playing games like Tetris very frustrating. I would be pressing left or right, and it would often register up, causing a hard drop. I…
This model is designed specifically for the Funny Playing FPGBC Kit and does not fit the OEM motherboard. Download the front shell here: Mono Front Shell Stereo Front Shell Assembly is quite straight forward and the battery cover is held…