103 models
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for PETGSource material: PET
Printing Print it sideways to gain an extra level of strenght and as a bonus, it wont break of the printing beed. You have to print it with suports everywere. Attaching I designed it in a way to mount it ease on your wall. Max screw sice:…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
The parent design is good, but I wondered, could I use about the same amount of material, but make it stronger/better ? The answer, thanks to Fusion360's generative design inspiration and stress analysis is yes! I hope this improved…
We designed these desk shelf legs generatively in Fusion 360 and produced them with SLS using the Sintratec S3 printer and robust PA12 nylon material. After printing and cleaning, we simply screwed the legs onto a wooden board and voilà:…
In 3d printing a RC Stearman model I needed an 11x5.5 prop. Instead of paying $3 for one I spent thousands of person-hours using high-expertise design skills to build this! It's a procedurally generated propeller design that's…
A generative design leg for a coffee table. Made in fusion360 with the generative design feature. The leg has a height of 250mm, but can be scaled to any size. Mounting can be done with three screws. The model needs some support.
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…
I needed a smaller one, same thickness but 50% otherwise adjusted hole size to still work with common screws
I used Fusion 360 generative design to create these 21 generations. See how it was designed and download 3 other sets of generations here https://piledltd.co.uk/generative-design-shelf-bracket-tutorial/ I have included the F3D file and…
optimized the amazing model for FDM printing
I needed a small shelf for my spiders terrarium. So I played around with the generative design in Fusion 360. I really like the organic look of it. Using wood filament gives it a tree-like aesthetic :) Prints supportless :)
Flower pot based on a randomly generated shape. Shapes were generated by a python script using siplex noise functions. Volume Model was built in Fusion360. I provide one file of the closed pot and a separate file of the pot with holes in…
I really like the way Generative design looks, so I made these bookends in Fusion 360. I designed these for a height of 5.212 inches or 132.4 mm. That info might be helpful if the scale on the .stl files is messed up like mine was. FYI,…
This hook is built on a print in place dovetail system there's no need for any supports. Simply break apart the dovetail part after printing and then screw it to the wall, slide on the hook and you're done! recommended printing at 25%…
Una semplicissima cnc da costruire! può disegnare, dipingere, tagliare carta, vinile adesivo, vinile termoadesivo, Occorrenti: 4 barre rettificate diametro 8mm lunghezza a piacimento, io le ho fatte da 510mm 2 barre rettificate diametro…
This is a simple pressure that requires supports (optimally with organic supports). In addition to the STEP, I also include the 3MF and gcode files that I used to print the files shown in the images on my Prusa MK3s+. The design is ideal…
Here are some snowflakes generated using 3dDJ's generative design capabilities: 3dDJ is our AI-powered generative design tool that can produce unique 3D models and concepts based on design prompts or keywords. For example, to make…
This has been a project Ive been conceptualizing for the last couple years and I'm excited to share my progress. I started this project with the aim of teaching myself about generative design and parametric design (I find I need a project…
This drone frame was created using the generative design feature in Fusion 360, which helps find shapes that are both lightweight and strong. Instead of designing everything by hand, the software suggests an optimized structure—resulting…
The perfect bookshelf for your engineering textbooks…well, ok, maybe just for a couple of them :) The total load case for the design was 75 lbs, however, I have NOT verified the accuracy of the design tool, or ‘sanity check’ any of the…
🌀 Cool Generative Design Phone Stand This futuristic generative design phone stand combines strength, balance, and modern aesthetics. Inspired by organic structures, it’s optimized for minimal material use while maintaining excellent…
AI Design (Generative Design) Monitor Stand Leg using 4xM4 bolts and nuts per leg I use 16x M4x20mm. per 1 table, 30x60 cm 10 mm thickness Acrylic for table top. You will need to mirror the model in slicer for another direction.
Hey, i want to share my generative generated 4" drone frame. I designed it myself, because there was non free available that made me happy. Its not tested jet!!! Work still in progress. Its designed for Mounting: - 25.5x25.5 - 30.5x30.5…
This model can be printed without supports at a 200um layer height.
Generative tablet or mobile phone stand.
These bookends are based on generative design, which lets you make unique organic shapes optimized for strength and mass. I made this symmetrical for aesthetic reasons, and I think it looks rather pretty. It has also been designed not to…
This is a model I designed using Fusion 360's automated modeling feature. Believe it or not, the design prints support free! I printed mine at 70% scale and use it as a display for random prints, but it can be used for all kinds of…
A vase designed in python. The Model is a surface only stl and printable in vase mode. Cura 5.0 is still able to print it as solid if a thicker shell is needed. Print settings: 0.28 mm layer height, 0.45mm layer width, 0.4mm nozzle
Customizable model. Addapt it to your needs.
I originally designed this holder as an SD card holder (if you'd like to see more about the design, check it out here) , but I happily discovered it also works quite well as a way to keep my guitar picks less scattered about! I printed…
When I decided to join the contest I was wondering what I could try that would be different from my normal approach. Just the day before, a user on Reddit shared some software that could be used for generative design, so I decided to give…
A PC Stand for the framework 16
Decided to try my own generatively designed shelf bracket that is easy to print and mount. I designed it to support a minimum of 50 lbs./bracket and I have been able to exceed this in testing using PLA with 2 perimeters and 20% grid…
Design parameters 1. Load = 150N (apply uniformly distributed) 2. Safty factor = 1.6 3. Material = PET (with assumption that manufacturing with 100% infill) Manufacturing by printing into layers affects the strenght which mostly…
This was my best attempt at generative design, in Fusion 360. I defined several load cases in different directions, and added some wall thickness constraints. It then built material between the cylinders. What I found cool was that it…
The phone holder is my first project which I made with generative design. Some supports are needed but it's easy to print.
This a handle I made for my print lab. Making it visible helps to explain what is topology optimization and generative design. But above all it has a very special “alien” look. I do recommend to use supports , 0,4mm nozzle and 0,2mm layer…
This project explores the use of generative AI to create font textures for 3D printing. The workflow uses the new Adobe Firefly (Beta) text effects feature to generate 2D images that are converted to 3D models for 3D printing. Create…
For a university project we had to design parts for the OpenRC Truggy. Our group focused on generative deisgn with integrated functions for the rest of the chassis. We used Autodesk Fusion 360 and Autodesk Inventor. This part is our…
I havent had a chance to print this yet. Post in the comments to share the best print settings.
Hey there! I made a simple shelf support, which can be the base of your next creation! I kept the surfaces clear and you will find the STEP & F3D files in the download area. The base values of the model are calculated with a load of 80kg…
Demonstration Bracket of a Generative Design Model
Materials you'll need: 2x 1" dowels 4x screws (I used 1.75" 10-24 screws) Wall anchors if you aren't mounting into studs. I recommend assembling the brackets and dowels before mounting to the wall. You may need to scale the spacer's…
Created these with a 0.2mm layer height. Blue and white example made from PLA and black and orange made from PETG. Try at 0.1mm layer height for a smother finish or try the ironing function. Colour swap comes in at 2.2mm height.
There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…
The lamp is a unique lighting fixture that creates a stunning display of light and shadow, unlike traditional lamps. It consists of a series of interlocking pieces that are 3D printed using high-quality PLA material. These pieces are…
Footrest for Scuttle Bug brand fold-able trike for infants. I used generative design simulation to remove some material with approx. 3kg load on each side. Footrest has to be removed to fold trike. A small amount of thin foam tape can be…
A generative design Shelf bracket was made using a Topology study in SolidWorks.
Recently I created some generative designs for square-shaped 3d prints to mount on a wall as decoration. I created them using geometry nodes in blender (using algorithms like voronoi). I had some issues exporting them and trying to lower…
A generatived Designed Phone Stand
The technology is not exactly designed for such purposes, so much had to be modeling manually. As a tool for the basic form, I used Generative Design from Fusion 360. Nomad Sculpt was used for subsequent processing and fitting of models.…
SpeedDrive by SASHALEX007 Inspired by the SpeedDrive design from SASHALEX007 , but found it too boring and not an optimal design. This design saves material is stiffer but more difficult to print . Topology Optimized Using advanced…
Created this cool sleeping fox. Would be happy to see your makes! Powered by PrintMon from MakerWorld (https://makerworld.com/makerlab/printMonMaker)
This hook is for your solid shower gel / solid shampoo. It has enough clearance to the wall to allow good handling and drying of the soap.
This 3D printed shelf bracket was developed using generative design to combine strength and lightweight geometry. It is engineered to support up to 20 kg of load and designed for shelves up to 250 mm depth . The model includes mounting…
Designed this model using generative design to create a fairly straight plant holder. Feel free to scale in the Z axis only as needed to fit your print height. To print, supports are not needed. I do recommend a brim though.
Here is a small and effective way to take your credit cards (or an ID and a card) out without worrying about bringing contamination back home in your wallet! Too many times I have had the issue of not knowing if my wallet is contaminated…
This is a generatively created ball. It can be used as a table tennis ball (ping pong). 3D-Printer: Formlabs Form 4 Resin: Formlabs Black Standard
This shelf started as a fun experiment in generative design—letting the shape form based on where strength is needed instead of designing a traditional boxy shelf. That process gives it a lightweight, organic look while still being sturdy…
This models generated with build123d python library, to be continued...
Designed this model using generative design to create a plant holder with three different holder locations spaced around an arc. Feel free to scale in the Z axis only as needed to fit your print height. To print, supports are not needed.…
Quick Start Slice plate 1 with Organic Supports enabled. Set Preferred Branch Angle = 50 Set Maximum Branch Angle = 50 Print the tree + terrain. Print plate 2 (pot + bushes). Place bushes on top of the pads. Description: This model is not…
Generative wall mount holder for my rocket, should be able to hold about 10 lbs. Holder is for a ~3 in body tube. Category: Decor
Give your Raspberry Pi 4 the stunning enclosure it deserves! I designed this case with an organic, generative pattern, not only to be a visually striking piece on any desk but also to maximize airflow and keep your Pi running cool. It's…
Printing itself should be very straightforward. The main bodies are intended to be glued onto the base which has a shallow opening of sufficient clearance for this purpouse. Total height should then be approximately 58mm. The main parts…
This is a bracket that is used to mount a piece of wood to your bed. The distance between the 6mm holes is 80mm. The mounting distance is 27,5mm. Printed at 0,3mm layer height and with tree supports.
A stand for the ROG Ally, Steam Deck, Nintendo Switch or any other handheld consoles
Brush holder for Proraso omega brush. Made with generative design. support is necessary, i would recommend orcanic support for best results i would also suggest to print it in a stiff filament like PLA
Play a bit with infill, it is designed to withstand 2kg with no infill and 4 wall lines, I also recomend using support everyhwere and you can scale it first to test your print settings, overhangs etc. This is my first model, if you need…
i used generative design to design this clamping chip clip. least material cost, least weight and with same strength. use supports on the body. Category: Household Supplies
A Generative Designed Headphone Stand
i made a toilet paper designed with generative design software for maximun strength and least material and least cost to make. to use i use gorilla double sided tape to stick to my wall. needs supports it is in inches, so dont be alarmed…
so is basically made sthis stand so it can fit 2 of my fragrances (any) dior homme 50ml (any) dolce gabbana light blue 100ml if u have any questions just write about it in the comments
I used Fusion 360 topology optimization, I love the organic shapes it makes. I included the step file to make it easier to include words on the base. I subtracted the hole in the base of the plane with blender, though my method of scaling…
Generative designed smartphonestand. I printed mine with pla, 0.15mm layer hight. Works well without support.
These 3D-printed bridge models were created for a high school Science and Engineering Fair project investigating how AI-driven generative design supports compare to traditional structural supports in different bridge types. The models…
This model is a shelf bracket created using generative design , focusing on high strength with minimal material usage. The organic structure provides a modern, technical look while remaining functional and lightweight. It is ideal for…
Created this cutie stylized Pikachu in an old racing car. Would be happy to see your makes! Powered by PrintMon from MakerWorld (https://makerworld.com/makerlab/printMonMaker)
This is a laptop stand designed in Fusion 360 using the generative design feature. It is designed around the Lenovo Thinkpad P16 Gen 2, but it should fit most laptops as this is probably one of the thickest around. Design Being more…
The model can be printed in two parts: Part A: contains the main body (grey) with supports Part B: contains the central “eye” (blue) The different pieces of Part A need to be separated by carefully twisting them after printing to remove…
This is a heavy-duty label holder designed specifically for large, industrial-sized label rolls that usually don't fit inside standard desktop thermal printers. I designed this using Fusion 360 Automated Modeling (Generative Design) . The…
I made this mount because i think generative design in fusion is cool and i wanted to learn how to use it. This model is a result of 8 iterations of playing with parameters, torque, acceleration and forces on the screw holes and strain…
This smartphone holder is designed to temporarily hang from the top edge of an existing vehicle monitor, creating a stable platform for a smartphone without requiring permanent installation. The geometry is inspired by generative design…
### Overview This is a functional, parametric storage container created in FreeCAD 1.1 featuring a screw-on lid with a striking, generative organic pattern created with Blender 4.1 Geometry Nodes. Perfect for storing small items, desk…
Bring a touch of generative art to your space with this modern Voronoi vase. Featuring an intricate cellular lattice structure, this design looks incredibly airy, lightweight, and organic. It makes a perfect decorative vase for dried…
A winter owl ornament whose "feathers" are a spinodal structure – the smooth, random topology of bone and sea sponges. The eye rings, eyes and beak stay solid, so the face reads clearly while the body stays light and airy. Generated…
A 420 mm hourglass stool with spinodal walls and a solid seat. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable. IMPORTANT This is a design showcase for large-format printing. The load…
A 95 mm coaster whose surface is a raised Voronoi cells pattern, computed rather than drawn. Print all five for a mixed set; swap colours at the relief layer for a two-tone look. Generated algorithmically (signed distance fields +…
A Christmas bauble that looks grown rather than designed. The shell is a gyroid – a triply periodic minimal surface found in butterfly wings and modern 3D-printed lattices – trimmed to a 70 mm sphere. The lattice gets slightly finer…
Three small pendants: a gyroid sphere, a trefoil knot and a spinodal drop, each with a loop for a chain or cord. A small gift that shows off what generative geometry can do. Generated algorithmically (signed distance fields + marching…
A stable with a Voronoi lattice roof and walls, with abstract figures and a manger with the child. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable. PRINT SETTINGS Size: 154 × 96 × 122…
A 95 mm coaster whose surface is a raised sunflower phyllotaxis spiral (golden angle) pattern, computed rather than drawn. Print all five for a mixed set; swap colours at the relief layer for a two-tone look. Generated algorithmically…
This steering wheel support skeleton wasn’t drawn. It was grown. It comes from the F1 steering wheel sample in Autodesk Fusion, and generative design shaped it. Fusion starts from what the part has to do: where it’s held, where the loads…
The animation on screen differs from the guide's starter sketch. A pendant case for the Waveshare ESP32-S3-Touch-LCD-1.69 V2. The board runs a generative art animation: colored lines and rings that keep moving and shifting hue. Tap the…
An ornament that looks like it was grown in a lab rather than modelled. The structure comes from spinodal decomposition – the pattern that appears when two materials separate, the same random-but-smooth topology you see in bone, sea…
A sitting fox with a big fluffy tail, wrapped in an openwork Voronoi skin – the same cell geometry you find in dragonfly wings and dried mud. The eyes and nose stay solid, everything else breathes. Every surface was generated…
