Giganotosaurus
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
- Downloads
- 323
- Likes
- 263
- Rating
- 0
385 models
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
This 3D-printed enclosure is specifically designed for the Arduino GIGA R1 WiFi board together with the official GIGA Display Shield . It consists of a top and bottom shell that are securely fastened using four M3 x 25 mm screws and four…
pokémon gigantamax mowth klíčenka
This is a wall bracket for the NICGIGA Smart 9 port Network Switch. This print does not fit on my AnyCubic Mega S and I have split the file into two parts to print. I have however included the original files should you wish to print it as…
Replacement of the original Creative GigaWorks t20 or t40 volume control. More control and better grip
Gigamons / Gigamon card holder and the needed 3 stones in 3D. Print the holder to keep the cards neatly stored in the box. The height of the card holder is such that the cards cannot fall out once the game box is closed. The holder has…
Turning mini portable pump into handheld vacuum cleaner.
Green Giga Grendel from Skies of Arcadia. I was Trying out sculpting in Blender and this is what I came up with for Grendel. First time doing sculpting from scratch I prefer using AutoCAD and drawing models like the air ships but I wanted…
A replacement case for Tuxedo's Computer's USB to LAN & Hub . The original I had had a minor issue with the RJ45 connector not locking the cable properly. If you have the same device and the Ethernet cable doesn't lock properly, you can…
In order to improve the support for my Elegooo, I created this piece. You will need a 30mm square iron tube, two M4 scr
Now - here the brand new design of my articulated snake, which is not that spiky anymore. The joints are again improved. I added a the mini snake (also as keychain with 3mm hole) which you can use as a test file before a big print, if…
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
A enclosure for the Arduino GIGA R1 WiFi with the Arduino GIGA Display Shield. Made for 4 M3 25mm bolts and 4 M3 nuts. EDIT: Added a version of the case with a built in stand and holes for a shield.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Made this for orca slicer for 1 print head or 4x print head. just change print bed x for 2 or 3 print head divide 800 by print head count. has pause command for layer height pause for you can change filament. to print from wifi add the ip…
A kit card figurine/sculpture of a giganotosaurus. An adhesive may be required depending on tolerance. I used super glue.
This is a Giganotosaurus model consisting of 11 parts, capable of limited articulation after assembly. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Elegoo Orangestorm Giga Enclosure. I printed everything out of PETG material. I used 3/16 dowel pins 1.750 length for connecting the door frames together. I ream the holes out. There is holes in the top frame for dowel pins also but I…
Printed in PETG. 150mm/s. 235 degrees c. No supports or bed adhesion.
This a quick Bed Level test print for the HUGE Elegoo OrangeStorm Giga. I designed it in Shapr3D and it should take about 12 minutes to fully print. I ran the manual leveling, then the auto mesh leveling and this print allows me to see…
This is a 3D model of the Elegoo OrangeStorm Giga in 1:1 scale that you can use to see how this printer might fit inside your house, garage or office. Inside the .zip file are the Augmented Reality files for you Android or iOS devices. I…
Sliced version of https://www.thingiverse.com/thing:4098730 file name explanation: First char: A = arm, B = body, H = head, L = leg, W = wing, T = tail second char: L= left, R = right S suffix = spikes Union-ing spikes resulted in failure…
This is a model plate of Giga Chad Giga Chad - Noun The name "GigaChad" indicates that the person is the ultimate Chad The plane should be printed at 100% infill on white filament for the best results, the stand can be printed on anything…
Print model IO shield for Gigabyte GA-B320M-S2H
Giganotosaurus z filmu Jurský Svět Nadvláda
Be persistent like a mosquito, at the end you will get your bite! (Easy to print NO raft or support needed) Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print…
This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…
Mini Mount - For single Expansion hub & Control Hub Giga Mount - For REV Expansion hub, Control Hub, battery and switch
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…
Conversion of the Elegoo OrangeStorm Giga to Bowden with fixed filament sensor Umbau des Elegoo OrangeStorm Giga auf Bowden mit festen Filamentsensor
Here's my proxy model for Gigazaur from the board game, King of Tokyo! I had to separate the head to get it printed because of the teeth, so I included versions with the head attached and without. I put the model on a 50 mm base, which…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
Remix of the Enclosure for Arduino GIGA R1 WiFi and GIGA Display Shield with a open back to allow access to IO ports
Spacing in the back is allowing other cables or cables coming from a hole in a Wall. No supports needed.
Gengar Gigantamax in a Swamp (Pokemon) キョダイマックス ゲンガー MMU Multi colour part design Category: Sculptures
There are other versions of this, but this one matches the dimensions of the rest of my rack mounts
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
Gigabyte AORUS logo transfered to STL territory.
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
Orange Storm Giga Spool Holder Mounts built for 1" PVC pipe. These are intended to be mounted on the top sides. This is the first version and it works pretty well for me. Some updates may come. The Taller version is untested. I have not…
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
Rear Io shield for the Gigabyte GA-H97-HD3
Gigantosaurus mini decoración o juguete.
Updated V2 with improved stability Material: Prusa PC Blend, Polycarbonate Infill: 100% Support: No Rafts: Yes 15mm outside only
For building an enclosure for the Elegoo OrangeStorm Giga, this is to have a front with doors that can magnetically shut. Front panel is made from laser-cut 3mm clear acrylic, used m4 screws and nylock nuts to secure to the printer frame.…
replacement io shield for A520M DS3H Category: Replacement Parts
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
Hope you like it :) Made in Blender. Category: People Meme https://www.tiktok.com/@mireplica3d/video/7222261953987611910
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tray to store the bed adjustment sheets so they stay flat. Thanks to Uncle Jessy for the inspiration.
layer height of 0.2 mm
Arduino Giga R1 WiFi model, based on the original Step model from Arduino but with pin headers and labeling Buy it here!
Giganotosaurus carolinii was one of the largest meat-eating dinosaurs , possibly even bigger than T. rex, but it had a lighter, more slender skull , built for speed rather than crushing power. Sculpted in blender, the model is divided…
pulpo gigante para tener de decoracion muy buen modelo no necesita soportes se imprime rapido
An easier to spin and fun to play with version of the amazing Gear Bearing by emmett. Thank by the way! Customized version of https://www.thingiverse.com/thing:53451 Created with Customizer!…
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
We needed to change the position of the spool-holder, because our printer is sitting in the corner. So we designed this mount for the original spool-holder and runout sensor. Nothing else is needed and you can use the original screws.…
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
Matching rack ears for 10 inch racks 20% infill, 5 perimeters
1:36 scale model of a gigantoraptor, a large species of oviraptor. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer…
Here is my parameter for my 3D Giga Chad : Total time : 4h 50m 1 files Layer height : 0.20 mm Nozzle diameter : 0.40 mm Material : PLA Total weight : 28g Printer type : Anycubic Mega Zero 2.0 Here is the model i use for making it :…
Bracket to mount an 92mm fan on the stock cooler on the Gigabyte MJ11-EC1 Mini-ITX server motherboard. Made for M3 threaded inserts, holes are 4,0mm. Uses the stock standoffs to mount on the cooler, those are M3 as well. Countersinks for…
For building an enclosure for the Elegoo OrangeStorm Giga, these parts raise the top of the printer so that a top panel does not impact the gantry and the maximum print volume is unaffected. All parts fit within the build volume of the…
I didn't like that the Display cable and the USB port is on the bottom because you could kick it easily. So i designed a protector cover, which hopefully break first before thew usb port or display cable Remove the 3 top screws and…
this dinosaur comes from the movie Jurassic World Dominion
a low profile 4 video output bracket for the gigabyte 1650, there are no 4 output designs only 3 outputs, so I made on Print as densely as possible if possible with PETG or ABS because the low profiles are hotter, check that the screw…
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
english Replaces the broken snapper of the Deuter backpack “Gigant” Recommended thickness: 0.1 mm - 0.15mm Perimeter: 3 Infill: 40 - 60 Material: PETG Fusion 360 file included Update 2026-feb-01 Over time, it has become apparent that the…
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
I didn't like the other designs, they were using too much material and the mount was too much visible behind the router. This is a very simple design. Print 2 of these and you're done! Print Settings Printer Brand: Creality Printer: Ender…
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
Support piece I made for my Gigabyte Vision 3070 to stop it from sagging. It may work for other GPUs. Default Height between GPU and PSU Shroud is 80.6mm. Default card width is 101mm. Fusion 360 file attached.
This is a remix of the front signage from the GigaPenguin Tuner Shop. It should be printed at a .2mm height. See screen shot on how to print for multicolors using Prusa Slicer.
Assembly with two M3x25 allen screws and two M3 hex nuts.
You will need to get longer M3 screws to mount the sensor on the mount. Also two holes for Ruthex M4 threaded inserts.
Hello everyone, This is my design for a Shantungosaurus Giganteus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
A color change in 1.6 mm. Printed with 0.2 mm layer, 0.4 mm nozzle. Dimensions are always approx 151 x 106 mm.
Gigantor (鉄人28号Tetsujin Nijūhachi-gō) robot MMU Every piece can be printed alone with the right colour and then just glue the pieces together. Model is about 35cm tall. For one whole model https://www.thingiverse.com/thing:4292986 and…
Magnetic mount for depth gauge manual level the bed. The hole diameter is .250 for the depth gauge. Link for magnet is below. Note: Make sure you have your printer in a spot its going to stay. These big printers like to flex and don't put…
I couldn't find a mount for my new switch so just designed it myself. Tolerances are a little loose if anything, but I would rather be a little loose than too tight and possibly scratch the switch. You could add a little felt pad to one…
moddied gpu bracket, to fit gpu and psu
Fits this and probably similar motherboards
Come support these models over on Patreon Buy my time, Not my models. Kit to make a gigahorse style car. Print one of the main file (gigihoss) and then choose your engine from 4x v8 engines, 2x jet engines, or a nuclear reactor. (nuke…
Basically just the half height version For Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL Would recommend printing using tree supports for only the half circle. The rest prints just fine.
IO plate for GIGABYTE GA-Z77X-D3H (rev 1.1) - I think it would work on other revisions as well. Fusion 360 project: https://a360.co/2HJfZyb Printed flat side down with no supports, material and quality don't matter because the print is so…
Hi, after my son broken original covers for my best PC speakers Creative Gigaworks T20 Series II, I decided to create my own cover version. Please leave your like if you appreciate my work to motivate me for more. Even better… show your…
Be the strongest player in any board game with Giga Chad Head Board Game Figure ! You can not lose now :-) I created my own Giga Chad Head Board Game Figure , to everyone who need coolest and strogest figures in board games… I took a head…
The USB port on the Giga is rather unprotected and for me it is reaching into a walkway. This should protect it. Secure with super glue.
Simple cable management parts for the OrangStorm Giga LCD Cable. The corner clip is used to secure the LCD wire along the corner frame to keep it form hanging free. I used 3 clips, but you can use more if you want it more secure up the…
Adapter for inflating sup-boards and rubber boats for Giga-Pump 4
Simple Phone Stand for the Gigaset CL660HX in 2 different Styles.
Gigantamax Gengar (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures