82 models
This is Chunky the multifunctional tent peg Of course it is only a peg if you add the metal wire nail. It is designed to work with cheap but big nails with a diameter of 6-7.8mm. Bought pegs are weak, expensive or don't fit my needs.…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Do you need a lot of coffee to survive your day? Do you use a lot of Illy coffee?
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint PlayerUnknown's Battlegrounds (PUBG) is a multiplayer online battle royale game developed and…
If you haven't lost a tent peg or tripped over a peg slightly above the surface of the ground, or the edge of a ground sheet, you have no use for this model! If you have, read on. EASE OF USE Simply hammer in the pegs as you usually…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
This is a set of modular pieces that make up the base of my Tikal temple ground series. It can be used for both fantasy and sci-fi settings. This set contains basic walls, corners, floors and ramps. Each piece can be put together with…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. You'll need the free model for each featured building in this assembly, this entry is just the base platforms for each, they fit…
Design is heavily based on this model by @HuMa_1372637 , so props to them! Remade their model from scratch to give a little reinforcement to the print as it looked a little weak to me. Install at the bottom of your coffee grounds…
No space for a knockbox? Fed up with loosing the portafilter sieve in the trash or organic waste bin while trying to clean it? There is a solution! Modell A, the version that you find in the enclosed pictures is made of Prusament PETG…
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
Hi, this is my first time on Printables (please be kind). I wanted to make a groundspike cover - or washing line hole cover for my Dad, who either lost his or never got one. This one is for a diameter of 45mm, and modelled on my OEM one.…
PUBG Headphone Stand. Headphones stand inspired by the PlayerUnknown's Battlegrounds logo The backplate is thin so it looks particularly good when backlit Print in two parts and slot together @3DPrintBunny
I did my own inlet since i sleeved the cards and they wont fit anymore whith their new height. The model has a dimension of 253x 253 x 40. I provieded to models one is a onepiece and the secondd one is split so that you can print it on…
Someone (occasionally) discarded original coffee ground box from Jura coffe machine at our lunchroom and I've modelled and printed a replacement using pictures from coffee machine manual. It works well at our Jura A1 machine. This is much…
Replacement for De'Longhi Magnifica S (ECAM 23.210.B). The tab that activates the sensor sometimes breaks and because of that problem I decided to reverse engineer this part.
Never liked a knock box for coffee grounds and chucking it into the sink made a terrible mess and blocked the pipes. So I made a container which can hold the humongous amounts of coffee grounds we produce. Bottom of the container has…
This is a none magnetic dice box for 10 dice with the Masters of the Universe logo in the bottom and the Faction Logo on the top lid. just paint the logos or break down into single objects My print is done with a 0,4mm Nozzle and 0,2 mm…
This long-handled coffee scoop is specifically designed to accommodate 12oz bags of coffee . Unlike the scoop which came with my coffee maker, which required reaching into the bag, this scoop features an extended handle that easily…
The Ninja Pods & Grounds Coffee Maker (PB040 / PB050) cannot accommodate some taller cups. This life will lift the unit around 23-25mm higher.
This is an original design. If you use loose coffee grounds in your Keurig K-cup this cork screw can help remove the loose grounds quickly. I've been using this for years so its been thoroughly tested. The cork screw part is designed to…
Hey, everybody. I don't know why there is little popularity for such a unique project “Tikal temple grounds”. Author's account : https://www.printables.com/@Terrain4Print This unique project allows you to create a beautiful and natural…
Coffee Grounds Tray for JURA ENA MICRO 9 (and maybee 90) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.3mm Infill: 25% Filament: Prusa PLA PLA Black Category: Replacement Parts
I got this grinder super cheap from a coffee vendor who was retiring. It works great, but came with a large doser and tended to waste more grounds than I'd use brewing only for myself. I made a wooden chute shortly after I got it to…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coffee Grounds Bench Top Waste Container. Happy printing.
Print it at least from PETG. DO NOT USE GCODE INCLUDED HERE. I use Vcore3 with Klipper and its Gcode flavor (and macros) isn't supported here, on printables.com (so this file contains Marlin flavor approximation). Included gcode is just…
This is a spill collector for the Demoka M-203 coffee grinder. It will collect coffee grounds that spill on the side of the portafilter when grinding espresso beans. Print instructions Print it in upright position, with brim and removable…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Needed something to save the coffee grounds for fertilizer so designed this. Works very well. Print Settings Printer: Geeetech Aluminium i3 Rafts: No Supports: No Resolution: .2 Infill: 20% Notes: For the Tapbar I boosted the infill up to…
Designed for 100 mm nails and a sheet with grommets. See the attached drawing for dimensions. Prints upside down without supports. A tougher material is recommended. I used ASA.
I printed both in PETG. I needed to scale the Pin to 94% because of the tolerances of my printer. I reused the old spring.
Version 2 - jetzt mit Henkel zur einfachen Entnahme Der Siebeinsatz wird in den original Kaffesatzbehälters gestellt. Das Wasser kann so aus dem Kaffesatz in den Hohlraum unter dem Sieb tropfen. So soll die Schimmelbildung im Behälter…
Most of the models I had printed kept breaking so I've tried making one a bit tougher and a bit bigger. You can tap the coffee out, but in case you're like me and move a bit quick and smack it too hard sometimes some extra strength is…
Coffe Grounds Container for Jura J5 made in freecad. I'm an absolute noob at this but it turned out ok :)
I recommend printing with ironing enabled.
I just used PLA with regular supports. The top piece has a decent amount that can be a little tricky to use. It uses a gopro mount btw Probably most of the parts: Radxa zero 3W (with heatsink) ufl → sma connectors x4 40mm fan some random…
This is a print in place, ratcheting handle that makes turning the grounds knocker on a Timemore 078 a little easier. Simply slide the printed part onto the original ground knocker. The friction fit is all that's needed.
A large knock box for your espresso machine. The box measures 200x96x50mm, and has a slot to hold a piece of wood (or other material) measuring 92x18.5x40mm. Print instructions Designed in Fusion 360, modeled after knock box included with…
updated - SD card is now accessible from the rear This is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles. Please disregard the antennas used, I'm waiting on…
Grounds container for the most popular Nivona coffee machines.
This is an original design. If you use loose coffee grounds in your Keurig K-cup machine this may be useful to you. I have been using this design for several years going through several iterations, and decided to publish this one. After…
Coffee makers are supplied with a coffee grounds container. Mine was missing so I printed one while I was waiting for one to be supplied by customer care team. Now I find it great to have two; I can accumulate grounds for quite a few days…
I'm always using Tyvek as a groundsheet, connected to the tent with a flexible cord. This set of buckles is made for the BA Copper Spur UL3 (2021), and when Tyvek is used, the tent can be pitched as fly-only. Also, in the normal setup…
This helps espresso grounds go into the desired receptacle.
Looking for a larger grounds cup for the Kinu M47 Phoenix? Me too. So I made one. Holds over double the original cup, more than enough room if you want to fill the entire hopper and grind two servings at once. Use the oring from your…
This is a ground drawer for a Saeco picobaristo HD8927 and the rest of the models compatibles with the original one (I have only tested it on my model). I recently bougth this model as an incedible offer but the ground drawer was missing,…
Introduction This light duty funnel is for use on a 58mm portafilter. The model comes in 2 versions: with and without magnets. The model with magnets takes Four 6x3mm cylindrical magnets. Printing Prints without supports. The model easily…
Update 20250106 V2: Made some adjustments to the angles. Corrected some distances.
This is a custom screw-on cap designed for the Kingrinder P-Series manual coffee grinder . It threads directly onto the grinder’s grounds storage area, allowing you to securely seal and transport freshly ground coffee. I created this…
Knock box for coffee grounds. Larger than a usual knock box & with lid - perfect for building up a little supply for composting or use in the garden V2 has smoother outside walls
Replaces part 32 Side Wheel
I've used the Filtron system to make cold brew coffee for a number of years. I love the way it turns out cold brew. This piece gets placed at the top of the grounds to help keep them from floating, so they stay in the water and turn into…
This is V1 of a grounds tray with a stand for a shaker.
Modello semplice per riporre i fondi di caffè usati, veloce e pratico. Simple model for storing used coffee grounds, fast and practical.
A printable replacement part for your Capresso Infinity coffee grinder. Printing Two files are provided, one with the “Max” wording and line and one without. My printer could not handle the overhangs on the Max model without tree…
A portafilter Holder made for the Fiorenzato All Grounds Sense. The main issue with the built in portafilter holder is that it cannot hold a portafilter with a dosing ring. This attachment gives you some extra height to fit a portafilter…
This is a simple holder for the Keurig use your own grounds pod so that it doesn't fall over when trying to put coffee into the filter on your counter. Enjoy!
Print this knockbox in any material you want, I chose PETG. No Supports needed! I added a colour accent by layer-based colour change. I used a 20mm wooden dowel. I measured it with calipers, came out at 19.7mm, which I designed for. You…
A coffee grounds keeper! It keeps coffee grounds from spilling on your benchtop. This is just a simple little thing I made for a mate. He had been annoyed that coffee grounds would spill over the edge of the portafilter basket (yes,…
I use a manual grinder for my coffee, which has a rather large grounds cup. This oftentimes results in me either making a mess or having to use a teaspoon to transfer the grounds to the portafilter. Quite annoying! So I designed this huge…
Tired of cleaning up stray coffee grounds from your countertop every time you grind? This 3D-printed drip tray/coffee catcher is the perfect, minimal solution to keep your home barista station spotless. Custom-designed to fit the base of…
The product is intended for storing coffee grounds.
The original design of Victoria Arduino Mythos II coffee grinder is very elegant and sleek, but the functional aspect is quite lacking when it comes to practicality - it is virtually impossible to keep errant grounds from accumulating on…
If you find yourself making drip coffee often enough that you find measuring out six tablespoons tedious, then this is for you! I'll make a pot of coffee for the office every day, and made this as an upgrade from our paper cup marked with…
58mm Rancilio WDT Coffee Grounds Distribution Tool Found its best to heat up the head of the pin with a lighter and pull it into the body a bit to inset the pin. all the caps are made to glue into place. handle threads into the tallest of…
Very accurate lamp, gorgeous design
Einfacher Behälter, 100x100mm, 3mm Wandstärke. Loch 25mm, Bolzen 24.6mm.
A replacement back plate designed for the coffee grounds container / waste bin used in Jura automatic coffee machines (compatible with Jura E8, E4, E6, and similar models using part number 74635 ). If the original plastic clip or mounting…
Coffee grounds holder with grid to spread easily on grass/lawn/plants/etc
Replacement grounds box for a Cuisinart coffee grinder. The original was slightly too large so I scaled it to fit. I beefed up the bottom lip and the part which engages the safety cutoff switch. I printed this in clear PC/PETG blend on a…
.3mf file has recommended settings and supports ready for printing (tested in orcaslicer). A replacement part for Melitta Passione OT coffee machine. Used push up the coffee grounds puck after brewing. Uses original springs with no…
Recently made a mess pouring coffee grounds into the filter basket, got really annoyed and made this to funnel the grounds in properly. Printed in PETG, PLA should work fine. However make sure your filter basket isn't piping hot, as it…
This is specific to the current Ninja Pods and grounds coffee maker, it should work for all models. it is used with this https://www.amazon.com/dp/B0F1DGX52R valve setup to tap into the fridge water line to feed water to the coffee maker…
This is a print in place, ratcheting handle that makes turning the grounds knocker on a Timemore 078 a little easier. Simply slide the printed part onto the original ground knocker. The friction fit is all that's needed.
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
A portafilter Holder made for the Fiorenzato All Grounds Sense. The main issue with the built in portafilter holder is that it cannot hold a portafilter with a dosing ring. This attachment gives you some extra height to fit a portafilter…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
Clint Eastwood 3D printable model. Super easy to print, size to your needs and go! Revised Clint, he looks more like Clint now. :)
![Coffee Grounds Funnel for Levelling Tamp Base [51mm Dedica Portafilter]](https://media.printables.com/media/prints/44bc5cc3-2b76-489f-aa89-1c11de12f512/images/11774666_a9cf0dc8-6b90-4f6c-a3c5-bc650802beb9_768a08b5-01b8-4fbc-a2f9-27d8a8d5d6aa/img_1251.jpeg)
