Netgear GS308EP 10 inch Rackmount
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
- Downloads
- 951
- Likes
- 52
- Rating
- 4.88
Counting matching models…
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…
Wall mount (invisible screws) for Netgear Switch GS308T
Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm
Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)
Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…
Support to be able to hang Netgear Switch 8 port Unmanaged Gs308 stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.
You can fix it with double adhesive face or 2 screws Printer settings : Material : PLA Infill : 20% Support : no
I wanted to move my switch off of the shelf to make it easier to access, so I designed an under shelf mount. It prints fine without supports if you print it with the back downwards. I've included CAD files if you want to remix it.
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
You need: 1 of each of the 4 models 4x M3 heat set inserts 4x short M3 countersunk screws 4x countersunk screws for your preferred wall mount solution Print the outside brackets with the outside on the build plate, so no support is…
This is 19" 1U rack mount bracket for a Netgear 8-port Network Switch (GS308PP). It's pretty beefy because it will be in a portable case and need to stand up to a lot of rough handling. I printed this with PLA on a Bambu Labs A1 Mini, so…
This bracket can be screwed on the underside of a shelf to hold a network switch. The switch will stand on its feet, and has a gap above to allow cable routing.
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
Beware this is only the right side of the modular rack model. Make sure you know this before printing. Use supports (organic is better)
An improved mount that prints in one piece and will securely contain a Netgear GS308E switch. Uses set screws. Will continue to add parts and pictures as I build my rack. Print face down with supports enabled. Four m3 screws are required,…
If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…
The original file works/fits great but I wanted the face plates to match the Dell OptiPlex file from @TimPrints_686384
The model provides a screw-in wall mount bracket for your NETGEAR GS308 switch. Printing details: Supports are required for the bottom lip of the bracket Print at 0.2mm Use PETG for flexibility
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS308EPP This bracket is designed specifically for the Netgear GS308EPP switch, offering a clean and secure fit in your 10-inch rack setup.…
On this way it will fit a regular bed :)
I really liked the original ESRack system design created by @EvilProphet . I created a module for Netgear Switch GS308EP from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
This model uses : 10x M3 8mm socket head screws 10x M3 nuts
This is an under desk mount for the Netgear GS308 8 port gigabit switch. Print two of this model, one for the left side, one for the right. Each bracket fastens with two 1/8" wood screws. It prints well on it's side, as modeled without…
The switch sit inside and can't move. The external dimension of the switch is 158 x 101 x 29 mm You only need 3 smalls screws. No support needed for the print. Yay !!
Netgear G308E (in my case V4) 1U 10" Rackmount. Ive added some + that go under the switch to mount it so it stays in place. You have to insert the switch from the back. Print settings: PLA Infill 20% Gyroid Edit: After some time in my…
I rewired my wired network and needed to mount the newly installed network switch in an entertainment panel. There are two versions of the holder but they're 99% the same. The one for the panel mount has bumps in the back to match the…
This is a very simple vertical base for the Netgear GS308E Switch. Since I'm fixing my home network infrastructure. I thought about placing the switch vertically, but not having much support, I created this base to keep it vertically. I…
this is a relatively simple model, print facedown with minimal supports. attaches to one side of the rack with plenty strength. unsure if it'll fit a 10inch rack.
I remixed two models to fit to my purpose. I needed a rack mount for my Netgear GS308EPP and my Raspberry Pi CM4. Therefore I adapted the left rack mount base with some different spacings to fit the GS308EPP (75mm spacing) little loose…
Minimal Vertical IKEA Skadis Mount for Netgear GS308E (v4) Switch Most mounting solutions for the Netgear GS308Ev4 I found were either incompatible with Skadis, in the wrong orientation, or required a lot of time and material to print. So…
Netgear GS308 Switch Wall Mount + Cable Management.
Cradle for the GS308EP, since the switch has no mounting holes Screws to the wall and the switch slides in from the top Lips along the front edges hold it in place Goes in either way: ports up with the power plug through the slot in the…
Made a shelf to hold my Netgear GS308 switch. It also holds my Netgear Mesh node, however, even though it's sized for it, when cables are connected it must hang off the front slightly. Reinforced the bottom of the shelves and holes to…
Bracket to mount a Netgear GS308E (v4, metal housing 158 × 101 × 29 mm) in a Hager volta multimedia enclosure. Ports face up, the switch stays open on all sides for cooling. Same design as my GS305v3 mount, scaled for the 8-port housing.…
I remixed two models to fit to my purpose. I needed a rack mount for my Netgear GS308EPP and my Raspberry Pi CM4. Therefore I adapted the left rack mount base with some different spacings to fit the GS308EPP (75mm spacing) little loose…
I rewired my wired network and needed to mount the newly installed network switch in an entertainment panel. There are two versions of the holder but they're 99% the same. The one for the panel mount has bumps in the back to match the…
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
This 3D-printed rack mount bracket is designed specifically for the Netgear GS308EP switch, making it easy to install in a 10-inch rack (1U height) . Features: Perfect Fit – Tailored for the GS308EP, with accurate port and mounting…
UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…
UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…