Suzuki GSX-R Side Stand Pad
Printed on Prusa MK3S+ with MMU2 with Prusament PETG. 50% gyroid infill 0.3mm layer height 4 perimeters
- Downloads
- 36
- Likes
- 5
- Rating
- 0
Counting matching models…
Printed on Prusa MK3S+ with MMU2 with Prusament PETG. 50% gyroid infill 0.3mm layer height 4 perimeters
Designed a cover for Epos Sennheiser GSX1000/1200 External USB Soundcard. The design is for GSX1000 but it should fit GSX1200 without problem. Printing: Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Mirror Block Off plates for better aerodynamics and lighter weight Bolts holes will fit 6mm or 1/4in diameter bolts with 0.45in/11mm Head diameter 2.75in Long x 1.0in Wide x 0.4in Thick Should Fit: Suzuki GSXR 600 '06-19 GSXR 750 '06-19…
keyring logo of suzuki gsxr
GSX-R Suzuki Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 08/06/2024 added: GSX_R_2.stl All trademarks, logos and…
Motorcycle keychain with Suzuki GSX R theme
On the Suzuki GSX-8R / 8S, when you take off the Fork Stem Nut Cover to install phone mounts like a Quadlock, it leaves a bare bolt visible beneath the mount. This cover hides the bolt with a similar design to the original cover, cleaning…
Dimensions Length 4.8cm // Width 2.8cm // height 6mm Total print time 24 mins on a Creality k1 Weight 9 grams total preferred settings Initial layer height 0.3mm // layer height 0.3mm // Enable ironing completely modular and fits into…
Ich habe an meinem Motorrad Neue Blinker Verbaut. Da ich nicht die Standard Blinker Adapter platten Kaufen wollte habe ich Selber welche erstellt. Ich habe versucht zu verhindern das an der Original Verkleidung etwas bearbeitet werden…
Ansaugstutzen Suzuki GSXR mit Winkel und kürzer als die Originalen, für Eigenbau Luftfilterboxen an Custom Bikes ----------------------------------------------------------------------------------------------- carburator intake manifold…
This is a large STL file meant to attach to the OEM (or knockoff) single-seat cowl for the Suzuki GSX-8R or Suzuki GSX-8S. I designed this because I was unhappy with the options on the market and wanted something that fits the design of…
Mikrotik Routerboard 260GSX wallmount This is based on tedder's Mikrotik RouterBoard Wall Mount for RB260GSP from Thingiverse Thicker base
A base plate to fill the reflector space on the GT - print this then stick a Suzuki badge to it. The badge I used was from eBay, item number 184397274069 Print this in PETG to reduce the risk of it melting, but be aware it may not cope…
Mitsubishi Eclipse GSX 2G as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Porta chaves feito em 3 partes e com encaixe perfeito 1 preto 2 RED 3 BRANCO
prints with no support. 0.4 nozzle. grid infill. (i used 40%). Petg. 0.2 layer height.
A small, handy key ring suitable for the Suzuki GSX-S. Inside there are 4 holes so the small 0.5x2.5 magenta fits in
WORK IN PROGRESS, please read the description. I wanted mirrors on my GSF 1250 SA GT with turning signals. But didn't want aftermarkt models. So looked for a model that came with these from the factory. I found the Suzuki GSXR 1000…
EPOS GSX 1000, Sennheiser GSX 1000 or Sennheiser GSX 1200
motorcycle keychain ( designed for gsx 1000 r )
Seitenständerplatte für Suzuki GSX Katana - mit Logo! Natürlich kann die Platte auch für andere Motorräder genutzt werden :-) … aber eine Suzuki GSX Katana (natürlich aus den 80er) ist eben eine Katana! … es kann nur Eine geben! Da die…
Nachdem mir der Spiegel bei 170Km/h fast weg geflogen ist, habe ich mich hingesetzt und einen neuen festeren Halter konzipiert. Wer Lenkerend Spiegel besitzt kennt das problem das diese Alu Buchsen sehr schlecht halten. Mein Modell ist so…
🌟 Introducing the "SUSUKI GSXR LED LAMP" Lightbox! 💡 Illuminate your space with the sleek and stylish "SUSUKI GSXR LED LAMP" Lightbox! Inspired by the iconic Suzuki GSXR, this captivating lightbox brings a touch of motorcycle enthusiasm…
Made this super quick because I bought bar end mirrors for my GSX-8S and the handlebars don't support the common tube adapters. You will need a 10mm hex wrench to remove the stock bar cap, then place this on the bolt as a sort of washer.…
Replacement volume knob for the EPOS GSX 300 headphone amp
This is a box to control FSDreamTeam's GSX in your flight simulator. I printed it with the following settings: My controller card is a Pokeys 56U USB card. I wrapped the key-bindings with it from 1-0 and the Ctrl+Shift+F12 Otherwise you…
Key Holder for a rider of a gsxr. It was designed as a gift. I used a filament switch to change the colors.
Suzuki GSX-R Steering "PLUG" (STEM YOKE TREE PLUG) (100% infill)
This is a replacement headlight socket retainer to replace the original which my motorcycle lacked. After 30 years old plastics become brittle and break, this apparently happened to the previous owner of a 1981 Suzuki GSX250E leaving me…
Adapter for the original brake pipe holder to the replacement pipes (diameter 3.5-3.7mm)
Uploaded this for Haavix on reddit- this is a license plate light meant to replace the taillight attachment on the Yoshimura tail tidy for the GSX-8 . This is a little involved and a really specific use case but since they asked I might…
For some reason the OEM USB connector costs $80 here and I had a bunch of Sumitomo connectors sitting around, so I decided to DIY a USB port that sits in the same spot. Fitment should be perfect as I designed the parts off a…
Gsxr Windshield bar for mounts such as gopros Printed in very masic settings. I suggest at least 3 shells but other wise its a strong part. Im sure you can screw the bar into the windshield and it stay. But I didn't like that way. I…
este es llavero es de GSX-F y utiliza PLA y se ha hecho en orca slicer a una tempereatura de 220 grados y 60 en bandeja
I didn't like the fiddly silicone cap that came with the weatherproof USB-C ports I ordered from Aliexpress for this https://www.printables.com/model/1111435-gsx-8r8s-usb-c-charging-socket , so I've created an alternate USB port that…
Suzuki GSX-R frame "pin" (100% infill)
This is a custom-designed spacer for the turn signal lights on a 2003 Suzuki GSXR600 (K3 series). The spacer offsets the turn signal slightly away from the fairing, making the lights more visible from different angles. Useful for…
Tuto součástku již není možné sehnat, tak jsem ji vytvořil. Výtisk z ABS
My original reservoir bracket broke while riding, so I had to quickly come up with this design. It has already covered 800 km with me and everything is fine. It sits lower than the original. Printed in PETG, but I think ABS/ASA would be a…
This adapter fits inside the throttle switch box housing on the right side clip-on. If the model doesn't fit well, you can make a copy with OnShape, and adapt it there . Warning Use this 3D model at your own risk. The author is not…
Gehäuse/Halter für LED-Kennzeichenleuchte (Shin-Yo Micro) passen für Kennzeichenhalter von Highsider/LSL. Andere Motorradmarken wären auch möglich.
This is a mount that will take a 1/4-20 UNC bolt (Cut down) and mounts to the wire cable guide on a suzuki gsx-650f I had to cut the bolt down pretty short for mounting the TPMS module I wanted. These are the bolts I used:…
Template for a GSX-R 750 exhaust mount
Works great, designed this to help drive in fork seals on my 2021 GSXR 750 (41mm fork diameter on the chromed area). I believe a GSXR 600 has a different diameter fork. Printed with 7 walls and used a rubber dead blow hammer so i wouldn't…
Key Holder for a rider of a gsxr. It was designed as a gift. I used a filament switch to change the colors.
This is a mount that will take a 1/4-20 UNC bolt (Cut down) and mounts to the wire cable guide on a suzuki gsx-650f I had to cut the bolt down pretty short for mounting the TPMS module I wanted. These are the bolts I used:…
Suzuki GSX-R Steering "PLUG" (STEM YOKE TREE PLUG) (100% infill)
A base plate to fill the reflector space on the GT - print this then stick a Suzuki badge to it. The badge I used was from eBay, item number 184397274069 Print this in PETG to reduce the risk of it melting, but be aware it may not cope…
Tuto součástku již není možné sehnat, tak jsem ji vytvořil. Výtisk z ABS
GSX-R Suzuki Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 08/06/2024 added: GSX_R_2.stl All trademarks, logos and…
A compact and stylish keychain featuring the iconic Suzuki GSXR logo. Perfect for riders and fans who want to carry a little piece of their passion everywhere they go.