Mine Mine Seagull
Selfish Seagull from Finding Nemo
- Downloads
- 1,879
- Likes
- 383
- Rating
- 5
2,300 models
Selfish Seagull from Finding Nemo
This is made for the Gulikit KingKong 2 Pro controller. I have not tested it with their other models, but it might work with them too. Main Features Pass-throughs for the back buttons (turn off, switch modes, pair) A hole for the charging…
We made a custom g-code generator for printing rectangular wave springs in midair because you can't really buy them anywhere. You can adjust the width/length, corner radius, number of waves, and many more parameters to suit your needs.…
A five-sided shape made of equilateral triangles and squares.
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
This is a triangular corner clamp utilizing l bolts. The clamp has a slight lip on its outer edge to let it sit on the work material. I made the L bolts out 4-½" x ¼"-20 machine bolts and chased the threads down further with a die. You…
The famous twelve-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only…
Gas regulator key for gas bottles (5 kg, 11 kg ect.). Nut diameter: 26 mm. Suitable for small bottle connections with butterfly nut.
For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo: You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the…
Did you know that a twisted irregular pentadecagon could look like a really cool vase? If it can't stay upright try to add some rocks to the bottom. Also do not add water unless you are sure it is watertight. Print at 0.2 - 0.3 layer…
Rc 1:10 scale triangular roof tent. Střešní trojúhelníkoví stan. Stan se otevírá na kloubu s použitím M3 šroubu, v zavřeném stavu ho drží magnet. Při dotahování pantu nechte šroub volný a nedotahujte ho jinak praskne pant.. Rozměry:…
Gul'dan : World of Warcraft.
The A-mazing Irregular Tetrahedra "A", the geometric sensation that's taking the alphabet to new dimensions! Print-tested on a Prusa Mini: 0.4mm nozzle, 0.15 layer height.
This is a triangular twist puzzle. This is a relatively easy puzzle to solve. The objective of the puzzle is to assemble the three pieces into a triangle. The puzzle should be able to be assembled with little to no force exerted onto it,…
Skips from the Regular Show
The famous twenty-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only…
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with White, Red, then Purple. Quick Guide to changing filament~ Have some paper to…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Articulated Triangular Prism , a charming geometric toy with moveable legs and a sleek triangular design. Perfect as a desk accessory…
I made this 2 inch x 2 inch x 9 inch brick to prop up a wooden shelf on my computer desk so that my keyboard fits underneath. Hopefully you find something useful for this model as well.
Triangular chalks give a good line but are a bit fragile and uncomfortable to hold. This holder makes it better. Just print the two halves and push them together around the chalk. choose what ever filament that you get good layer adhesion…
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
Holder for GPS, VTX Antennas (in my case DJI O3, but others with SMA adapters also work) and a fixed XT-60 for easy plug in of the battery. Print the main part in TPU and two spacers in a rigid material like PETG or PLA. The advantage of…
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Bonsai pot 33 rectangular curved inward 162x122x42mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
Retro Artistic Rendition of Planetary Engulfment. Feel free to figure out a better way to orient, spit and slice this beast. I would not necessarily go with my g-code. its just there as a starting point.
The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a…
Aquarium air flow regulator for 7mm tube with M4 screw and exagonal nut.
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Llavero con logo de Gulf Oil. Hecho para imprimir en 3 tonos.
Caligula Pleasure Boat Mosaic. Here's a summary of the fascinating journey of the Caligula Pleasure Boat Mosaic: Origins: Imperial Pleasure Barges: The mosaic was originally part of one of two lavish pleasure barges built by the Roman…
A connector to make a triangular prism out of straws. Uses the white part of the straw from boxed milk.
Ryobi makes several AC Inverters and USB chargers. The 40V battery RYi300BG is nice because it has a 300W Pure Sine wave inverter, a USB Type C port 5/9/12/20 VDC rated at 2A, and a USB type A port rated at 3A. Unfortunately it doesn't…
I designed and made these to enable easy connection of corrugated plastic sheets, in this case used for my father-in-law's greenhouse walls. Probably better made of ASA Prusament to withstand outdoor conditions.
Redukce na odsávačku hlenů Nosátko pro rušní vysavač Leifheit Regulus PowerVac. Odsávačka musí být určena pro vysavač, např: https://nosni-odsavacky.heureka.cz/nosatko-nosni-odsavacka/ Pro lepší těsnost jsem kontaktní plochy oblepil…
A triangular model for the common rectangular thermometers you can get from Ebay / Aliexpress. I mostly designed it like this for fun, but it should not tip over while providing plenty of airflow to quickly pick up temperature changes. It…
Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…
Rear or Satellite Speaker Mounts with Optimal Angle Positioning Technical Design for Surround Sound Systems This advanced design offers a practical and efficient solution for mounting rear or satellite speakers in surround sound…
Meeting my local store I was shocked by how expensive those parts are (reg. EUROPLAST System 110x55) and made some parts myself. Model is for 0.8mm Nozz and NO Supports (whilst therefore, my design is a little different compared to the…
Broche nudo infinito Triangulo
The hinge for the plexiglass door is mounted on a V-slot (recommended 40x20) and is fully adjustable along multiple axes. The hinge operates very smoothly. I used 6mm plexiglass for this project and 40x20 V-slots. The knob I used is this…
This is a 12V buck boost regulator which can be mounted directly to a battery. Because it is a buck-boost converter it will always output 12V (or any voltage set by the user) even if the battery voltage is lower than 12V. It can even…
PCIe/PCI bracket to fit Wi-Fi/Bluetooth antennas from an M.2 wireless module. Recommended PLA with supports as PETG sticks to supports with the force of god.
This project is a DIY power supply with a voltage regulator inspired by the flux capacitor from Back to the future movie. The model of the case is highly optimized for 3D printing on any FFF printer. Print instructions I had a (self-made)…
This is a cover for the IKEA EKOLN soap dispenser that is simply put together. I printed the parts on my MK4S using MMU3. All parts PLA 40% lightning infill
Chopsticks holder with an angular design.
With these 6 pieces, you can build an n·(n+1)·(n+2) solid brick. The volume of each piece is the sum of the first n triangular numbers. Therefore, the sum of the first n triangular numbers is: Σₙ Tₙ = n·(n+1)·(n+2)/6 In the provided STL…
“Hey dad, I want a cannon so I can shoot bad dreams away”. “That's a great idea!" --Three hours later-- "Here, son, look at this amazing cannon that i found and printed!” “Great! I want seven of them! - but small enough so i can put them…
Print Setting Short Sword Nozzle diameter: 0.4mm Layer height: 0.15mm Support: Yes for the body of the sword. No for the rest. (see the settings in the 3mf file) Brim: No Infill: Any Multi-color: No Material: PLA (Silk PLA recommended for…
This plaque can be attached to a wall with 3M Command strips. The plaque in the photographs was printed on a Mk3s+ using Form Futura Brilliant White and High Gloss Color Morph Gold & Silver PLA. A prompt for changing filament is in the…
Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…
Instruction: Separate objects → lay flat → print with support. infill: 15%
This is a companion to the Triangular Peg Puzzle. It allows safe, easy, tranportation of puzzle without danger of losing parts. It also serves as a container for the pegs as they are jumped and removed from board.
A rectangular socket for felt. Size of the foot: 20 x 15. Size of the felt strip: 20 x 13.
If you like my work and want to support me bringing you new content please consider supporting me on Patreon Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Nice rectangular key tray with curved lines and rounded corners. The ideal storage place for car keys, coins and other small items. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D…
These are two phone stands (one with a voronoi pattern and the other without) that can be printed without support material. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate…
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded. UPDATE 16/02/2024: added folder with other filler size, in case you are…
Designer Dovydas Cesna Needed a sturdy little trash can, relatively simple model with a nice pattern on the walls to make it stiffer. total size: 200x200x225mm Settings in PrusaSlicer with 0.4mm nozzle: Vase mode 0.7mm wall thickness…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Need a headband? You're in luck here's one. There's also an f3d file available for an easier remix! Note: Print from the side you can see has a chamfer on it's teeth facing downwards!
Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…
This is a new modell, of my popular overhang test. In this model I eliminated some of the old ones issues (like bumping with the nozzle). It test for 40, 30, 20 and 10° overhangs. It prints quick, around 30 mins. Print settings you must…
This fan-art project came about at the request of my two children, both of whom LOVE Bluey and Bingo and are the same age as the characters in the show! Made using Nomad on iOS. Print notes When imported on cura the models are…
vase with rectangular pattern
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
I designed this f-clamp holder to store my clamps in the most compact way on the wall. This is the smaller version of LR2218 , for regular and small clamps. How to Print this Clamp Holder There is a Prusa Slicer example project ending in…
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
I had the opportunity to get a 3D scan of myself and heres the result - " A regular dude with backpack ". Print definitely needs supports! Please share your version if you print this model. Thank you! HAPPY PRINTING :)!
Air Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda) Dimensional measures: Hex 100mm Ø100mm 100x100mm 100x200mm 100x200mm Vertical (NEW) 125x150mm 150x150mm…
I built a DIY router table a while back and needed a connector for my regular old shop vac (I don't own a fancy dust extraction system with 100 mm hoses ;-) The part prints without supports and can be screwed right into your fence without…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…
hole size M3 (spare HDD SSD mounting screws mostly come with motherboard) My print settings layer height: 0.2 wall: 3 infill: 15% If you enjoy my work, please consider support at link in profile.
Recommend printing in ASA for heat and UV protection. Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both…
Triangular Wall Art - Mountains Designed for room decoration. Designed for easy print with no supports and with light body. Paramenters: X: 220 mm Y: 200 mm Z: 2 mm (minimum thickness) - can be printed in every type of filaments -…
Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle
General This STL contains the rough measurements to print channel covers for the revealed parts of the Anycubic Kobra. My rough estimates were: 148mm x2 (2 channels by screen) 195mm x2 (2 channels opposite side of the screen) 312mm x 2(2…
Universal Triangular Access Key for Utility Meters and Control Cabinets. A durable and reliable tool designed to easily open technical enclosures, gas meters, electricity panels, and water valves. ⚠ CRITICAL PRINT NOTE: Do NOT print this…
Update 11/22/25: Adjusted blade pocket size of 65 degrees version from 15 to 14 mm, avoid filament not getting cut properly. A long time ago I discovered pomi's filament cutter but wouldn't want to use it without a box a la wapameeto's .…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
Upgrade your Milwaukee Packout organization with this Universal Gridfinity Plate ! Unlike my previous models that were limited to either slim or regular drawers, this design works seamlessly with both drawer types , saving you the hassle…
NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…
Battletech stackable miniature storage tray 5x5, Stores 25mechs. Trays stack on each other It's stacking compatible with the 4x4 XL tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…
This is actually a re-mix of www.thingiverse.com/thing:3200739. However I couldn't use the URL in the description
Gridfinity Peg or Standing Socket Holders - 1/4" Drive, Regular and Deep Sockets 1 X 4 Gridfinity Footprint Metric Includes Space for: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm sockets SAE Includes Space for: 3/16, 7/32, ¼, 9/32, 5/16, 11/32,…
Triangular Mountain Wall Art – Minimalist Nature Wall Decor Hexagonal Wall Art is avaliable on my profile The design features four triangular panels with mountain and forest landscapes, creating a modern and stylish wall decoration. These…
This model is compatible with the lego system.
This is a remix of @chadfawcett_690675 original design. Updated the dimensions for a snug fit. Increased the height to 5mm taller to clear the cable from rubbing on the PCB as well as the acrylic sheet from rubbing on the PCB connector.…
Gravity Knife Fidget Toy. Fully 3D Printed. No extra hardware. 2 Blade types. Regular and Keychain versions.
Regular triangle rail cross for wooden railway by Ikea, Brio, ... Recommended printer settings: Perimeters: 3 Layer height: 0,2-0,3mm Infill: 10-20%
Stylus that is similar to the one loaded onto the flashforge 5M / AD5M from the factory. Has two spots for magnets. Same magnets that are in the enclosure kit. Printed with default settings, but add brim, and no supports.
…Please at least be sure to hit like & post a make, I'd love to see your prints! Use volcano nozzles in your sv06 plus. DONT LEAVE A BAD REVIEW BECAUSE YOU DID A BAD PRINT! Like the single reviewer here! That's just not cool. It’s…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…